[HELP] erorr in CWM or TWRP - Galaxy Grand 2 Q&A, Help & Troubleshooting

hi
i flashed cwm or trwp on my galaxy grand 2
when in press home key+power key+veloum up my phone is going to downloading mod and type "could not normall boot"
what i am doing?!!!:crying::crying::crying:
Please answer ??

Give model of phone ( Lte or dual sim?) and what recovery version u want flash

AiWaNczewski said:
Give model of phone ( Lte or dual sim?) and what recovery version u want flash
Click to expand...
Click to collapse
dual sim
6.0.5 cwm

saeed1378 said:
dual sim
6.0.5 cwm
Click to expand...
Click to collapse
Try flash this : http://forum.xda-developers.com/gal...recovery-twrp-2-8-6-0-touch-recovery-t3107535 , TWRP is much better than CWM and more compatible with new roms AND use ODIN 3.07 Link if u cant find : https://forum.cyanmod.pl/applications/core/interface/file/attachment.php?id=2819
How to install :
1) Install whatever drivers make you happy and make your device connect (i would suggest samsung ones).
2) Reboot your device in download mode you can use adb reboot download or the hardware key combo for your device.
3) Load up Odin and uncheck auto-reboot.
4) Click PDA and select the TWRP tar you downloaded.
5) Connect your device in download mode.
6) Click start.
7) When its finished disconnect your device, pull the battery out.
8) Reinsert the battery and use the hardware keys for your device to power directly into recovery mode (this will bypass install-recovery.sh if you are stock).
9) Enjoy having a custom recovery.

happens with me too
Maybe Because of the bootloader is locked on our devices

AiWaNczewski said:
Try flash this : http://forum.xda-developers.com/gal...recovery-twrp-2-8-6-0-touch-recovery-t3107535 , TWRP is much better than CWM and more compatible with new roms AND use ODIN 3.07 Link if u cant find : https://forum.cyanmod.pl/applications/core/interface/file/attachment.php?id=2819
How to install :
1) Install whatever drivers make you happy and make your device connect (i would suggest samsung ones).
2) Reboot your device in download mode you can use adb reboot download or the hardware key combo for your device.
3) Load up Odin and uncheck auto-reboot.
4) Click PDA and select the TWRP tar you downloaded.
5) Connect your device in download mode.
6) Click start.
7) When its finished disconnect your device, pull the battery out.
8) Reinsert the battery and use the hardware keys for your device to power directly into recovery mode (this will bypass install-recovery.sh if you are stock).
9) Enjoy having a custom recovery.
Click to expand...
Click to collapse
Thank you, the problem was solved.
when im going to recovery boot when i saw logo "galaxy grand 2" i press the volume down and phone went to recovery boot.

saeed1378 said:
Thank you, the problem was solved.
when im going to recovery boot when i saw logo "galaxy grand 2" i press the volume down and phone went to recovery boot.
Click to expand...
Click to collapse
'Nice to know i can help

Related

[Q] Samsung Galaxy S4 LTE (GT-I9506 German T-Online Branding)

hey guys, I'm trying to flash a clean rom (kitkat google edition) on my S4 LTE, the problem is I'm failing to install the cwm or any other recovery! I search some threads, tried different recoveries, different odin versions, and everything is flashing fine, but after the install via odin, it reboots, and no recovery! still the old e3 one! Im not a complete newb (I hope x)), did flash my SE X10, my Atrix 2, but failing this one.... mb its the firmware I need to change or the boot loader? android version is 4.3, if u need any details I can provide just ask ^^
I used these steps:
Steps to Install CWM Recovery on Galaxy S4 (LTE+) I9506
Step 1: Extract the Odin 3.07 .zip file using WinRAR/7-Zip/WinZip or any other extracting tool.
Step 2: Copy the Root Package .zip file to the SD card of your phone.
Step 3: Switch off the Galaxy S4. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 4: Run Odin on the computer as an Administrator.
Step 5: Connect the Galaxy S4 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 6: In Odin, click the PDA button and select the CWM/PhilZ Touch .tar file. Verify that Auto Reboot and F. Reset Time checkboxes are selected. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.
thx for the help)
i9505 and i9506 are differents and you cant apply same method for install a custom recovery. Follow this thread for install the recovery: HERE. Try it by your own responsibility. Anyway the phone is branded and I dont think you cant change the recovery.
Did u flash i9505 recovery and worked?
Sent from my GT-I9506 using Tapatalk
Joku1981 said:
i9505 and i9506 are differents and you cant apply same method for install a custom recovery. Follow this thread for install the recovery: HERE. Try it by your own responsibility. Anyway the phone is branded and I dont think you cant change the recovery.
Click to expand...
Click to collapse
dude can you read? it's not the same method it says I9506 for a reason, which is how to root 9506!!! can't post links yet so I copy paste the instruction
mezo91 said:
Did u flash i9505 recovery and worked?
Sent from my GT-I9506 using Tapatalk
Click to expand...
Click to collapse
makes no sence, there is a recovery for i9506, 3 actually, and no, I didn't. after odin succesfully applies the recovery (so it says), it is auto rebooting NOT into the new recovery, but into the android system. after manually rebooting, the old recovery boots up. there are tons videos and guides how to root 9506, the thing is I stuck after the odin flash, with the old recovery
A.Mavromati said:
makes no sence, there is a recovery for i9506, 3 actually, and no, I didn't. after odin succesfully applies the recovery (so it says), it is auto rebooting NOT into the new recovery, but into the android system. after manually rebooting, the old recovery boots up. there are tons videos and guides how to root 9506, the thing is I stuck after the odin flash, with the old recovery
Click to expand...
Click to collapse
That's simple. All you do is ucheck auto reboot in odin on pc, when flashing custom recovery is complete from odin pc unplug it then long press power button until it switches off then press vol up home and power and boot to recovery and disable recovery flash
Sent from my GT-I9506 using Tapatalk

[Q] (i9500) I flashed the leak of Lollipop and can't initiate in recovery mode

Hi, I flashed this monday the leak of Lollipop for Samsung Galaxy S4 (9500) and after I followed all the steps one by one I'm the only one in earth that isn't able to start the phone in the recovery mode. For this reason I can't flash gapps. I am not able to downgrade even because for the KNOX.
Someone has the same problem? Can anyone figured out how to enter in recovery mode?
P.D: I have attempted to do it with the buttons (vol down + pow + home) and with adb and the usb connected to the phone. Anyone was the solution.
masicen said:
Hi, I flashed this monday the leak of Lollipop for Samsung Galaxy S4 (9500) and after I followed all the steps one by one I'm the only one in earth that isn't able to start the phone in the recovery mode. For this reason I can't flash gapps. I am not able to downgrade even because for the KNOX.
Someone has the same problem? Can anyone figured out how to enter in recovery mode?
P.D: I have attempted to do it with the buttons (vol down + pow + home) and with adb and the usb connected to the phone. Anyone was the solution.
Click to expand...
Click to collapse
after flashing Rom with Odin you have to flash openrecovery-twrp-2.8.4.0-klte.tar
Installing Recovery and rooting steps :
1- download twrp from here
2- go to flash mode
3- run Odin load file as AP then click start
4- go to recovery by powering off your device and hold volume up + home + power button
5- when you want to reboot to system Twrp will ask you to install SuperSU (rooting your device)
6- swipe to confirm
More info here
haririan said:
after flashing Rom with Odin you have to flash openrecovery-twrp-2.8.4.0-klte.tar
Installing Recovery and rooting steps :
1- download twrp from here
2- go to flash mode
3- run Odin load file as AP then click start
4- go to recovery by powering off your device and hold volume up + home + power button
5- when you want to reboot to system Twrp will ask you to install SuperSU (rooting your device)
6- swipe to confirm
More info here
Click to expand...
Click to collapse
I did all of this, still can't to initiate in recovery mode.
i had the same problem, try downloading philz (philz_touch_6.48.4-i9500) or twrp recovery (openrecovery-twrp-2.8.4.0-i9500) and install via odin (AP box)
I didn't try the above i just installed the rom again, doing this:
- only the AP file
- uncheck "auto reboot"
- After the process finishes dont reboot the phone to tw, just go to the recovery mode and the wipe cache/data
- Install philz or twrp via odin
dnnz said:
i had the same problem, try downloading philz (philz_touch_6.48.4-i9500) or twrp recovery (openrecovery-twrp-2.8.4.0-i9500) and install via odin (AP box)
I didn't try the above i just installed the rom again, doing this:
- only the AP file
- uncheck "auto reboot"
- After the process finishes dont reboot the phone to tw, just go to the recovery mode and the wipe cache/data
- Install philz or twrp via odin
Click to expand...
Click to collapse
So, flash the ROM again with nothing more than the AP box fullfiled and then, when it finishes hold (vol up + power + home). Wipe cache, restart and flash custom recovery.
Am I right?
masicen said:
.........................P.D: I have attempted to do it with the buttons (vol down + pow + home) and with adb and the usb connected to the phone. Anyone was the solution.
Click to expand...
Click to collapse
masicen said:
So, flash the ROM again with nothing more than the AP box fullfiled and then, when it finishes hold (vol up + power + home). Wipe cache, restart and flash custom recovery.
Am I right?
Click to expand...
Click to collapse
It can not, because in the first flash has deleted the modem, bootloader, csc and others, so if flashing only AP will not operate the phone, only the PDA.
And masicen these questions have to do in the same thread firmware also behold the solution.
Flashes the firmware again, to start turn it off and go into Recovery by: Volume Up + Home + Power in this order and holding down until you see the Samsung logo there S4 loose and enter the stock recovery, do wipes and restart it, then download Philz Touch in its latest version and flash it with Odin and restart turn it off and try to enter the recovery now.-
lobomarino said:
It can not, because in the first flash has deleted the modem, bootloader, csc and others, so if flashing only AP will not operate the phone, only the PDA.
And masicen these questions have to do in the same thread firmware also behold the solution.
Flashes the firmware again, to start turn it off and go into Recovery by: Volume Up + Home + Power in this order and holding down until you see the Samsung logo there S4 loose and enter the stock recovery, do wipes and restart it, then download Philz Touch in its latest version and flash it with Odin and restart turn it off and try to enter the recovery now.-
Click to expand...
Click to collapse
Hi, I wasn't able to test it before but now I had my computer and I did all that you suggested and could iniciate in the recovery mode but when I tried to flash gapps an error appeared (status 6) and now I can't manage to flash it :'(
Any solution to that??
p.d: thanks for your help.

Samsung Galaxy S5 SM-G900F 5.0 stuck during root

This is not the first time i root an android device but it is the first time im doing it on an S5, nonetheless I am pretty much stuck right now.
I tried to install CF-Auto-Root-klte-kltexx-smg900f.tar using Odin from here, it installed with no problems, but when the phone restarted I get:
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
and then it shuts down.
I tried to enter recovery mode by doing power+vol up+menu but nothing happens ?
Can anyone help ?
EDIT: ok, so I did manage to get it running again by flashing openrecovery-twrp-2.8.5.0-gt-klte. This got me past the "Recovery is not seandroid...", but all in all I still didn't manage to get root access...
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
You don't flash .img - you flash .tar
*Detection* said:
You don't flash .img - you flash .tar
Click to expand...
Click to collapse
I did flash .img.tar actually. Still no effect - boots to regular recovery. Can't figure this out...
i get in the same situation...why still rebooting in original recovery?
i installed this one CF-Auto-Root-klte-kltexx-smg900f.tar with odin with succes but still have
RECOVERY BOOTING
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit: recovery
then when i boot i get a black screen with all application error....the only way to get it back working was to wipe factory reset in original recovery.
what can i do to get it working so i can install custom roms?
thx in avance
seaskyways said:
I passed through a similar situation , all u have to do once u've got the recovery is get the SuperSU flashable zip and flash it and ur done
Here is a direct link : https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
Click to expand...
Click to collapse
I can't seem to get the coustom recovery installed, and after some digging i found this :
manubhargav said:
Actually the problem was that custom recovery(twrp here) was not installed at all, that above mentioned error occurs when you try to install SuperSU.zip from stock recovery<3e>.
This happens because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
VL4DST3R said:
I can't seem to get the coustom recovery installed, and after some digging i found this :
The thing is, when i try to do that, and then get into recovery i get
Could not do normal boot.
ODIN MODE.
Any help ? Please ? The bloatware is driving me nuts :crying:
Click to expand...
Click to collapse
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
---------- Post added at 05:36 AM ---------- Previous post was at 05:32 AM ----------
xmun said:
This happened to me also. I am running XXU1BOJ1 . I flashed twrp-2.8.7.0-klte.img and even though it solved getting stuck at recovery, my phone still boots into the standard recovery instead of TWRP when pressing VOLUP+Home+Power. Anyone got ideas?
Click to expand...
Click to collapse
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
manubhargav said:
Maybe your phone is not recognized in Download Mode as corresponding drivers may not be properly installed. So Computer is not able to recognize the phone when in Downlaod mode. Install SM Bus Controllers drivers from Intel from Official driver source.
After setting-up you'll be able to flash TWRP and boot into recovery mode.
Actually the problem of custom recovery (TWRPhere) not installed at all, stock recovery<3e> persists after reboot because when you flash custom recovery from Odin and allow it to reboot on its own, Samsung's recovery checking script checks if a custom recovery is present and overrides.
To bypass that check you need to take your battery out as soon as the recovery is flashed by Odin ( and before the phone reboots).
As soon as the Odin says PASS you should be ready to take out the battery which will stop it from rebooting,
Put back the battery and enter recovery mode directly by pressing and holding Volume Up, Home and Power keys at the same time.
Release all three buttons when Samsung Galaxy S5 screen flickers and the main screen of Recovery mode appears.
This will avoid script checking and will let you to custom recovery directly,there you can install SuperSU or any other zip.
Click to expand...
Click to collapse
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
VL4DST3R said:
The drivers are installed, and Odin sees my phone just fine, also the thing with removing the battery before it restats leads me to the error i mentioned above...
Click to expand...
Click to collapse
Ah, So the problem you're facing is NOT getting into recovery mode
There are 2 ways to solve the problem, (1st -> flashing recovery.tar again, 2nd-> flashing stock firmware)
First method:
Enter "Download Mode" by holding down "Volume Down"+ "Home" + "Power" button.
Flash recovery.img again and check if it boots into recovery this time.
Sometimes this may not work and you may need to try flashing firmware
Second method:
Download Firmware from here
Open odin in your PC
Enter "Download mode"
Connect the device to PC using USB
Flash the PDA, BL, AP, CSC etc.
Alternatively, You can flash the firmware using SmartSwitch
manubhargav said:
Ah, So the problem you're facing is NOT getting into recovery mode
Click to expand...
Click to collapse
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
VL4DST3R said:
Oh but it is! That's exactly my problem. Look, here are the 3 outcomes I get regarding the whole recovery menu thing:
Go into the default recovery menu - cant install SuperSU but at least it works.
Install twrp and remove the battery after it finishes transfering and wants to restart, at which point when I go into recovery I get the above error (Could not do normal boot. ODIN MODE.)
Install twrp and let it restart by itself and after it is done, go into recovery only to find it is back to the default one.
Click to expand...
Click to collapse
Which Kernel version are you in? Which TWRP version did you try? Install other custom recoveries? On locked bootloader?
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
VL4DST3R said:
Ok, I tried CWM and nothing changed, i get the default recovery menu...
Doing the shut down before it restarts gets me "recovery is not seandorid enforcing"
Click to expand...
Click to collapse
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
manubhargav said:
Turn OFF Auto-Reboot option in ODIN and flash the recovery.tar and remove battery and directly boot into recovery mode.
Go into a working custom recovery (CWM or TWRP) and flash SuperSU.zip from the recovery and reboot with ("Fix permissions" if there is such an option, otherwise simply reboot).
Click to expand...
Click to collapse
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
VL4DST3R said:
Tried that already, and as I said, I can't get a custom recovery working, it either resets to the default one or I get the "recovery is not seandorid enforcing" error.
Click to expand...
Click to collapse
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
Boot Rom and go into settings/aboutphone/ click build number rapidly.
Developer settings should appear, then go into developers options/ click on "root access" and enable it.
---- now test if its working . however....
2)
If its not working, take yourself back into twrp and flash that supersu beta.
----now test again. However ....
3)
If it doesn't work again .
go back to stock 5.0 rom>>> put twrp on >>> and flash DAT supersu .
now test ya rom again. However.........
4)
If it dont work again ..
go back to stock 4.4 rom>>> put twrp on>>> and flash a random supersu.
now test ya rom again. However.....
5)
if that doesn't work again,
Go back to stock rom through (odin) and restart the process from the top .
btw the "recovery is not seandorid enforcing" is normal . not an error.
GeniusisHere said:
1)
Ah use latest twrp 2.8.70
Ah use latest supersu beta 2.52
Quick download cm12.1 nightly and flash it.
---- now test if its working . however....
2)
----now test again. However ....
3)
If it doesn't work again .
now test ya rom again. However.........
4)
If it dont work again ..
now test ya rom again. However.....
5)
if that doesn't work again, .
Click to expand...
Click to collapse
First of all holy **** what an answer... let's SLOW DOWN a bit first, shall we ?
Secondly you lost me from step 1, I don't want CyanogenMod, I want the default Samsung 5.0 with TouchWiz (contrary to popular belief I actually like it).
Also I would really like to know (from someone that actually knows why this happens) why is it reverting to default recovery and how can I stop it from doing so ? manubhargav had an interesting idea, but sadly it doesn't work for everyone (as someone else mentioned on that other post)
So I'm guessing no one knows the answer to my problem considering almost a moth has passed...
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
I know that in kitkat the answer was to turn off / disable 'Reactivation Lock' (located under settings>>security and unchecking the box)........
I had heard that Samsung had removed that option in lollipop, but it might be worth checking......it has/had to be disabled BEFORE attempting to flash anything......
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
RL is still there with LP too

pleas help

I have a problem I wanted to install a new recovery twrp 08/02/70 . but I could not get the bootlop then I Odin flash stock lolipop 5.0 but now I can not install recovery still write me in stock recovery E : failed to mount / EFS ( invalid argument )
Did flash the stock rom with a pit file?
I install stock rom and naw rot and phisl touch recovery but a cen instal rom music of life v4 6.0.1 rom
pleas help whit install rom
What should I do now I have a model n9005 new bootloader BL_N9005XXUGBPB2_BOOTLOADER.tar.md5 and modem installed CP_N9005XXUGBPB1_MODEM.tar.md5 I philz_touch_6.48.4 - hlte.tar.md5
Install follows wipedata / factory reset and then a new clean room then wipe cache partition and wipe Dalvik cache and then install rom choose the option note 3 n9005 international CSC then choose default
then do not wipe keep apps and that's it you set the phone starts up and appears with a logo and a blue light and regulations Bit Set Warranty : kernel and nothing happens that I leave to stand for half an hour , or who knows what I'm doing wrong pleas help whit this.
Sorry wrong thread
audit13 said:
Did flash the stock rom with a pit file?
Click to expand...
Click to collapse
To flash TWRP Recovery:
1. Turn off phone
2. Bring the phone to Download Mode (power button + vol up + home)
3. Connect phone to computer and open up Odin
4. Click on AP or PDA and select your .tar file (this is the twrp recovery file)
5. Click Start and once done your phone will reboot into TWRP
If your phone does not boot into TWRP automatically:
a) repeat steps 1-4
b) click on options tab (in Odin) and uncheck everything except "F. Reset Time"
c) click Start
d) once done, disconnect your phone and take out your battery
e) bring the phone to Download Mode (power button + vol up + home)
f) your phone should then boot into TWRP
For more detailed instructions: http://forum.xda-developers.com/showthread.php?t=2560928
Good luck!
M-Ego said:
To flash TWRP Recovery:
1. Turn off phone
2. Bring the phone to Download Mode (power button + vol up + home)
3. Connect phone to computer and open up Odin
4. Click on AP or PDA and select your .tar file (this is the twrp recovery file)
5. Click Start and once done your phone will reboot into TWRP
If your phone does not boot into TWRP automatically:
a) repeat steps 1-4
b) click on options tab (in Odin) and uncheck everything except "F. Reset Time"
c) click Start
d) once done, disconnect your phone and take out your battery
e) bring the phone to Download Mode (power button + vol up + home)
f) your phone should then boot into TWRP
For more detailed instructions: http://forum.xda-developers.com/showthread.php?t=2560928
Good luck!
Click to expand...
Click to collapse
Thanks hope it helped

i can't install twrp on galaxy core prime (sm-g361f)

i tried everything, but i can't install twrp. i tried to install via odin 3.12.3 but nothing. how can i resolve this issue? i tried also with a pre-rooted firmware.
hello,
fedetrevi1 said:
i tried everything, but i can't install twrp. i tried to install via odin 3.12.3 but nothing. how can i resolve this issue? i tried also with a pre-rooted firmware.
Click to expand...
Click to collapse
dude write some more info will you, i dunno whether
your device is locked
you have developer drivers on your laptop
what TWRP version you are trying to install
but anyways if the whole process is completed without any results consider starting odin as an administrator then flash TWRP
Hello sir
Follow my steps for successful TWRP/ROOT
1.)Download and install Samsung USB Drivers
2.)Download TWRP 3.0.2.0
3.)Download Odin
4.)Download SuperSU.zip file
For download links message me or add me on facebook facebook. com/fRoD.cs
After you complete this 4 steps shutdown your phone and enter into Download Mode
Volume Down + Power + Home
Select continue by Volume Up key
Now connect phone with usb cable into pc and run Odin as administrator
Click on AP box and select the twrp.tar file you download before
Go to Options tab and uncheck Auto Reboot, make sure that only F, Reset Time is checked and click start
After successfully installed TWRP , remove the battery, put it back and make sure that you go into recovery mode immediately!!! Volume Up + Power + Home
If you boot up the phone it will restore the original recovery. Thats why you need to go to recovery mode first.
First time you boot in recovery it will be shown a TWRP screen asking to allow modifications to system partition. Swipe to accept that.
Now select Install option and select SuperSU.zip file. By default it should be in Download folder, and swipe to start install
After installing click reboot and your SM-G361F will be rooted. You should have SuperSU app in the menu
Working Recovery
stevo4 said:
Hello sir
Follow my steps for successful TWRP/ROOT
1.)Download and install Samsung USB Drivers
2.)Download TWRP 3.0.2.0
3.)Download Odin
4.)Download SuperSU.zip file
For download links message me or add me on facebook facebook. com/fRoD.cs
After you complete this 4 steps shutdown your phone and enter into Download Mode
Volume Down + Power + Home
Select continue by Volume Up key
Now connect phone with usb cable into pc and run Odin as administrator
Click on AP box and select the twrp.tar file you download before
Go to Options tab and uncheck Auto Reboot, make sure that only F, Reset Time is checked and click start
After successfully installed TWRP , remove the battery, put it back and make sure that you go into recovery mode immediately!!! Volume Up + Power + Home
If you boot up the phone it will restore the original recovery. Thats why you need to go to recovery mode first.
First time you boot in recovery it will be shown a TWRP screen asking to allow modifications to system partition. Swipe to accept that.
Now select Install option and select SuperSU.zip file. By default it should be in Download folder, and swipe to start install
After installing click reboot and your SM-G361F will be rooted. You should have SuperSU app in the menu
Click to expand...
Click to collapse
https://forum.xda-developers.com/ga...sm-g361f-unofficial-twrp-2-8-7-3-0-2-t3425402
hi
I have a problem with my g361f. After few sec proces of flashing twrp failed.. Can you help ?
thocenski said:
hi
I have a problem with my g361f. After few sec proces of flashing twrp failed.. Can you help ?
Click to expand...
Click to collapse
Ah, opportunely, I have the exact same device.
Now, I have actually installed TWRP before so I can help.
Usually, if it stops the flashing process, it may be a case of the Custom binary being blocked by the FRP lock on the device. Have you OEM unlocked it?
On the device, when you boot it into download mode, does it say FRP LOCK: ON on the screen?
If not, skip this step.
If so, you need to do the following:
1) Reboot the device normally
2) Go into Settings, Developer Options (note: to enable it, go to About Device and spam the Build Number box until it says that you are a developer)
3) Find where it says 'OEM Unlock'
4) Confirm the change
Now, there is an extra step which I had to take if you have a Google account signed in on your device. You might not need to, but it's best just in case:
1) Go to Settings, Accounts and Google
2) Click the Google account on the device
3) Click 'Remove Account' and confirm
Note: You will need to sign in to use any of the GApps, but you cannot access the recovery whilst being signed in because of the FRP lock.
4) Reboot your device into download mode and try again.
This may not be the case, though.
Also, don't bother with adding that guy on Facebook. I have all the downloadable things you need here, but I advise you do follow his guide, except the Download folder section. He missed out that you need to download the SuperSU binary to your device. Downloads are here:
Here are the Samsung USB Drivers for Mobile Phones (NOTE: You may not need these at all since you can actually begin the flashing process without them, so don't bother):
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Here is the TWRP recovery (NOTE: Please download the 3.0.2.0 version, since it is more up-to-date and more likely to succeed:
https://forum.xda-developers.com/ga...sm-g361f-unofficial-twrp-2-8-7-3-0-2-t3425402
And here is ODIN (You already have it, but here it is anyway. Also, download the first one, not the second one, since the first one is newer):
https://odindownload.com/download/
Also, the SuperSU binary (Note: It's easier to open it in your Android browser and download the file from there. That avoids the need to transfer the file from the PC to the phone):
http://www.supersu.com/download
Now, it could, in fact, be a problem with the USB cable. It's highly unlikely, but mine is a bit tempermental, insisting that if I nudge it, it'll stop working.
Notify me how it goes, because this worked first time for me.
fedetrevi1 said:
i tried everything, but i can't install twrp. i tried to install via odin 3.12.3 but nothing. how can i resolve this issue? i tried also with a pre-rooted firmware.
Click to expand...
Click to collapse
Go to developer settings and check OEM Unlocking (if its already checked recheck it) and then reboot. Then close the phone and install TWRP.
Hi I've managed to install the correct twrp on my device but when I go into recovery I get the same message not seandroid enforcing. I've followed all the steps but I can't get it into recovery on twrp. Does anyone have a solution please?

Categories

Resources