Hi friends, I couldn't find a custom recovery for tab 4 10'1 (sm-t535). I used a twrp( I can't remember the version nr) and it ended with a boot loop. Flashfy didn't help.
Anyone who can help.
niyazidk said:
Hi friends, I couldn't find a custom recovery for tab 4 10'1 (sm-t535). I used a twrp( I can't remember the version nr) and it ended with a boot loop. Flashfy didn't help.
Anyone who can help.
Click to expand...
Click to collapse
https://twrp.me/devices/samsunggalaxytab4101.html
repey6 said:
https://twrp.me/devices/samsunggalaxytab4101.html
Click to expand...
Click to collapse
I think I have tried this without help. I will try again to be sure when I am at home. Maybe twrp manager could help.
Thanks for your help.
repey6 said:
https://twrp.me/devices/samsunggalaxytab4101.html
Click to expand...
Click to collapse
It looks like a softbricked device after flashing twrp, but after 5 minutes it boots actually in twrp.
Thanks again.
Related
Hi all, I have a bit of a strange problem that is I cant update my twrp recovery from twrp, flashify or fastboot the only way I can update is from twrp manager. every time I try and flash it it says it has done but when I try and boot into recovery it just goes to the oneplus screen and no further! had a bit of a look on the forums but couldn't find anything, any help greatly appreciated,
thanks
edit: I can upgrade from twrp itself from 2..... to 3.0.0 but not from 3.0.0 to 3.0.0.1 or 3.0.0.2
matt_simpson said:
Hi all, I have a bit of a strange problem that is I cant update my twrp recovery from twrp, flashify or fastboot the only way I can update is from twrp manager. every time I try and flash it it says it has done but when I try and boot into recovery it just goes to the oneplus screen and no further! had a bit of a look on the forums but couldn't find anything, any help greatly appreciated,
thanks
edit: I can upgrade from twrp itself from 2..... to 3.0.0 but not from 3.0.0 to 3.0.0.1 or 3.0.0.2
Click to expand...
Click to collapse
flash through adb.
krishna442 said:
flash through adb.
Click to expand...
Click to collapse
Just done that, thanks (but still cant understand what the issue is of doing it the easy way.
matt_simpson said:
Just done that, thanks (but still cant understand what the issue is of doing it the easy way.
Click to expand...
Click to collapse
Yes. You installed official twrp 2.8.7.0?? I didn't try updating twrp through twrp. If I did I could've provided assistance.
I can't take anything easily, so if at all I have something new to do, I'll start from the beginning. Lol.
Sent from my ONE A2003 using Tapatalk
Hi,
I'm on this since morning today and still stuck.
I'm flashing the stock 6.0.1 image (https://github.com/motoxplay/stock/...562_LUX_RETASIA_DS_6.0.1_MPD24.107-52.xml.zip) via FASTBOOT successfully.
After the first boot, I flash the recovery (http://forum.xda-developers.com/moto-x-play/orig-development/recovery-twrp-2-8-7-0-t3194656) which also goes fine.
But when I flash SuperSU (https://download.chainfire.eu/921/SuperSU/UPDATE-SuperSU-v2.65-20151226141550.zip) ... it gets stuck at the boot logo.
It must be 20th time I reflashed the ROM trying various things. What am I doing wrong??
Thanks
flash su2.63-3 works on 6.0.1
bablu048 said:
flash su2.63-3 works on 6.0.1
Click to expand...
Click to collapse
Strange why 2.65 STABLE won't work.
Anyway, can you please link me to it?
ibr4him said:
Strange why 2.65 STABLE won't work.
Anyway, can you please link me to it?
Click to expand...
Click to collapse
here http://forum.xda-developers.com/moto-x-play/general/root-how-to-root-6-0-easly-t3277202
m too stuck there..please help me ..my phone is not turning on
hello,
so i was installing cm13 while installing i wiped entire partition(data,including system)
now i can only boot into recovery , i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing if i reboot it will again go to reovery only wont boot into phone..
please help
thank you
ancilary said:
i installed cm13, cm-12.1-YOG4PAS9IG-ham-signed-d4fc2c5394 , after installing ..
Click to expand...
Click to collapse
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
strongst said:
That's doesn't make sense, can you explain what it means? Which recovery, which rom was installed and was working? You wipes system and data, ok. What did you do then?
Click to expand...
Click to collapse
hi , thanks for reply
i was using nought rom 7.0 & TEAMWIN recovery
i performed wipe ( data , cache , system , internal storage)
then installed cm13
it booted only to recovery , after that i tried flashing different rom , no use everytime it goes only to recovery..
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
strongst said:
What's with your other request? http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921
You need cm13 or stock rom? It's annoying to open several threads..
Click to expand...
Click to collapse
that was different but i tried this and now im stuck here
ancilary said:
that was different but i tried this and now im stuck here
Click to expand...
Click to collapse
And what you need is a running cm13 now?
strongst said:
And what you need is a running cm13 now?
Click to expand...
Click to collapse
ya running cm or any other rom is fine..
ancilary said:
ya running cm or any other rom is fine..
Click to expand...
Click to collapse
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
strongst said:
seems you don't know what you need cm isn't the same as cos, the difference is huge.
For cos12.1 stock rom you can get it here http://forum.xda-developers.com/zuk-z1/help/how-to-make-device-stock-t3515921/post70007487
Flash it with all in one tool, it's the easiest way.
Cm13 you can flash it though twrp.
Click to expand...
Click to collapse
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
ancilary said:
i flashed cm-12.1-YOG4PAS3AJ-ham-signed.zip with twrp still i get booted to recovery only
Click to expand...
Click to collapse
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
strongst said:
You didn't understand or read my post... You need to flash stock firmware with fastboot. I didn't wrote flash it with twrp.
Use the all in one tool. It's called so, because you can do all with it. Like downloading stock rom and flash it :good:
Click to expand...
Click to collapse
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
ancilary said:
i tried flashing stock recovery using All in one tool but now its not booting to recovery only
Click to expand...
Click to collapse
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
strongst said:
Sorry mate, why you do that? It said to flash stock rom with all in one tool, not stock recovery
Click to expand...
Click to collapse
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
ancilary said:
i read it as recovery my bad...
now i cannot boot into recovery/fastboot.
powers on rarely too just shows zuk logo and goes off
Click to expand...
Click to collapse
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
strongst said:
Use all in one tool to boot into bootloader. Read carefully or your next step is qfil method
Here's a good guide in case you're don't get it through aoi tool: http://forum.xda-developers.com/zuk-z1/general/qpst-method-how-to-unbrick-to-stock-t3506833
But better to check again if you can flash stock cos rom with tool
Click to expand...
Click to collapse
Nothing is happening in phone , no respone for any button press . its wont turn on also now
ancilary said:
Nothing is happening in phone , no respone for any button press . its wont turn on also now
Click to expand...
Click to collapse
Can you charge it?
I know i know i should't use the ota update having root + twrp + custom kernel.
But now i am stuck at a kind of bootloop always booting twrp. I had made a back up before even downloading ota update but recovering it does not fix the problem.
Any way to fix this ?
EDIT : UPDATE : bootloader -> start -> works!!
But now everytime it reboots it goes to recovery.
It shouldn't be a problem now since i can boot to android but if there is a way to switch default 'boot to recovery' to 'boot to android' i would be very glad to know.
Illiax said:
I know i know i should't use the ota update having root + twrp + custom kernel.
But now i am stuck at a kind of bootloop always booting twrp. I had made a back up before even downloading ota update but recovering it does not fix the problem.
Any way to fix this ?
Click to expand...
Click to collapse
Can you boot to bootloader and select start?
strongst said:
Can you boot to bootloader and select start?
Click to expand...
Click to collapse
Yes! that do works. Thank you for this workaround, see updated post pls
Illiax said:
Yes! that do works. Thank you for this workaround, see updated post pls
Click to expand...
Click to collapse
Please wipe cache and art/dalvik in twrp.
Illiax said:
I know i know i should't use the ota update having root + twrp + custom kernel.
But now i am stuck at a kind of bootloop always booting twrp. I had made a back up before even downloading ota update but recovering it does not fix the problem.
Any way to fix this ?
EDIT : UPDATE : bootloader -> start -> works!!
But now everytime it reboots it goes to recovery.
It shouldn't be a problem now since i can boot to android but if there is a way to switch default 'boot to recovery' to 'boot to android' i would be very glad to know.
Click to expand...
Click to collapse
Try this link
https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
Be sure to turn on debugging and oem unlock mode
Hi
How to fix this problem?...I can't find the fix in the link you mentioned above..
Thanks in advance
Innayath Innuz said:
How to fix this problem?...I can't find the fix in the link you mentioned above..
Thanks in advance
Click to expand...
Click to collapse
You have to flash the stock rom again, no any other fix to it
Sent from my Moto G4 Plus using Tapatalk
DgnrtnX said:
You have to flash the stock rom again, no any other fix to it
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Wrong!
pastorbob62 said:
Wrong!
Click to expand...
Click to collapse
What do I do
Innayath Innuz said:
What do I do
Click to expand...
Click to collapse
This question asked many tines and has same reply,
Read this post: https://forum.xda-developers.com/moto-g4-plus/help/bootloop-to-recovery-update-t3787623
Hi deleted my OS using TWRP and tried to install stock OP5 rom but couldn't and read somewhere that in order to install Stock ROM you need to be on Stock recovery, so I flashed stock recovery using TWRP and now I can't have my phone detected in adb or fastboot.
I can go into fastboot and recovery but my phone is not detecting in adb/fastbbot.
PS : When I had TWRP installed, I could see the device in adb devices and not fastboot.
And now with Stock Recovery, I can't see the device anywhere and hence can't install OS.
Please HELP!!!!
https://forum.xda-developers.com/oneplus-5/how-to/guide-unbrick-guide-hard-bricked-t3761706
try this
Can't follow steps 2 and 6
djnim said:
https://forum.xda-developers.com/oneplus-5/how-to/guide-unbrick-guide-hard-bricked-t3761706
try this
Click to expand...
Click to collapse
Can't follow steps 2 and 6
Thank you so much
djnim said:
https://forum.xda-developers.com/oneplus-5/how-to/guide-unbrick-guide-hard-bricked-t3761706
try this
Click to expand...
Click to collapse
THANK YOU SO MUCH Man, I didn't sleep whole night and couldn't fix it and now one post on XDA and you arrived.
Thank you so much
Hey Guys!!
I by mistake wiped system in my one plus 5 after installing twrp.
My phone now shows only blank screen with blue LED on the top. Is there any solution. Any help would be appreciated. Don't know where to search
Aayush96+ said:
Hey Guys!!
I by mistake wiped system in my one plus 5 after installing twrp.
My phone now shows only blank screen with blue LED on the top. Is there any solution. Any help would be appreciated. Don't know where to search
Click to expand...
Click to collapse
After you've wiped the system partition what you did? What was your rom, twrp, magisk version etc?