Related
Sorry for my English I will try to explain my problem.
After rooting everything was fine, but when I try to flash stock firmware somethings happen.First problem is that my PC cannot detect the phone with Odin and adb or mass storage I am 100% sure that the problem are not the drivers because I root that phone on the same PC before a week and of course I try everything on a another computer, but without success.
Download mode Odin cannot detect the phone! after many attempts to fix usb problem now the phone cannot boot , only in recovery (loop)after every start it's show recovery with message
Filesystems:
system: rfs
data: rfs
cashe: rfs
maybe system, data and cache files are erased I don't know.
recovery version is 0.1.3.b5
How can I flash stock firmware without PC. For example HTC devices can flash from SD card - Gold card, and PB99IMG.zip (I can't explain very well what I mean sorry)
Maybe the phone is usb bricked !
working..
recovery - only recovery
Download mode Volume Down + power off + camera ) - but cannot connect to PC and Odin.
not working
after flashing new costume ROM - the same thing - reboot to recovery
installed software on pc
android SDK,Kiesmini_1.0.0.10075_1,Samsung PC studio 1.5.1.10064_2,Drivers for spica on (Windows 7 x86)
really I cant find post like this !!! and sorry for my English
If you can go to download mode and phone is not detected, then you have bad drivers or bad usb in PC. Try another PC.
I have 3 pc and 2 cables and the same problem cannot detect. Can I flash new stock firmware without odin ?
godhamer said:
I have 3 pc and 2 cables and the same problem cannot detect. Can I flash new stock firmware without odin ?
Click to expand...
Click to collapse
Have you tried different USB ports, specifically one on the back of the PC?
Sent from a state of Serendipity
I told you that the problem is not drivers.Before week I flash another Samsung without problems. I think the problem is USB brick or something else
I HAVE DRIVERS
Help please !!!!!!!!!!!!!
reinbeau said:
Have you tried different USB ports, specifically one on the back of the PC?
Sent from a state of Serendipity
Click to expand...
Click to collapse
godhamer said:
I told you that the problem is not drivers.Before week I flash another Samsung without problems. I think the problem is USB brick or something else
I HAVE DRIVERS
Help please !!!!!!!!!!!!!
Click to expand...
Click to collapse
Calm down. Did you read what I posted above? I said nothing about drivers. Have you tried other USB ports? Most people find the ports on the back of the CPU work the best, not ones on the front, or on a hub. It does make a difference.
hi my mate has and s4 9505 and he wiped the hole phone like a noob and it wont enter recovery and in odin nothing will flash tried pit file and also stockrom it either gets stuck on setting up connection or stuck on pit mapping part tried adb devices command but its not picking up the devices the drivers will be on his comp as he has all ready flashed things via odin before on the s4 any ideas people cheers
strikerdj2011 said:
hi my mate has and s4 9505 and he wiped the hole phone like a noob and it wont enter recovery and in odin nothing will flash tried pit file and also stockrom it either gets stuck on setting up connection or stuck on pit mapping part tried adb devices command but its not picking up the devices the drivers will be on his comp as he has all ready flashed things via odin before on the s4 any ideas people cheers
Click to expand...
Click to collapse
Try that:
You can use this software to repair Your dead Samsung i9505 and similar (m919, i337, L720 etc)
Note, You need to install QHUSB Qualcomm drivers first.
After flashing with this software, You need to flash phone with official firmware and PIT file, otherwise phone will be dead again, and You'll need to repeat the process.
If You get errors reported by this software (command prompt window), You'll have to replace the eMMC chip first.
Click to expand...
Click to collapse
Warning ..I never tried that..
source
Please report back if that worked for you.
Thank's
ausdim said:
Try that:
Warning ..I never tried that..
source
Please report back if that worked for you.
Thank's
Click to expand...
Click to collapse
thanks will try this
I'm in this exact same position. Can you please post back with your results as to how it goes.
Thanks
EDIT - I simply changed USB ports and it worked fine!
oblique1 said:
I'm in this exact same position. Can you please post back with your results as to how it goes.
Thanks
EDIT - I simply changed USB ports and it worked fine!
Click to expand...
Click to collapse
no such luck for us and that the other thing didnt work either :/
Did you install the drivers for the phone?
Did u put phone in download mode and flash with odin?
If so, trying closing all kies process, changing usb port and run odin with admin. Flash pit file and stock firmware.
lzk123 said:
Did you install the drivers for the phone?
Did u put phone in download mode and flash with odin?
If so, trying closing all kies process, changing usb port and run odin with admin. Flash pit file and stock firmware.
Click to expand...
Click to collapse
yea drivers are installed and yea vol down power and home in to download mode we uninstalled kies and installed drivers on own same thing then we re installed kies and same thing tried the 4 usb ports on him comp and when a flash pit or stock rom odin doesn't go past setting up connection
ran the adb command adb devices and it just doesn't seem to be picking up his device
strikerdj2011 said:
yea drivers are installed and yea vol down power and home in to download mode we uninstalled kies and installed drivers on own same thing then we re installed kies and same thing tried the 4 usb ports on him comp and when a flash pit or stock rom odin doesn't go past setting up connection
ran the adb command adb devices and it just doesn't seem to be picking up his device
Click to expand...
Click to collapse
Did u restart the com after reinstalling kies? Try restart computer now and flash.
yea every time a install something and uninstall some thing allways reboot the comp
strikerdj2011 said:
yea every time a install something and uninstall some thing allways reboot the comp
Click to expand...
Click to collapse
What error shows up when u flash stock rom and pit again?
it just stays on setting up connection on odin thats it doesn't go any more past that point
strikerdj2011 said:
it just stays on setting up connection on odin thats it doesn't go any more past that point
Click to expand...
Click to collapse
What odin version are u using? Are u sure you have properly installed kies or drivers? The latest kies version? Try disabling antivirus and installing latest kies.
tried with odin 1.85 3.04 and 3.07 and yea latest kies i uninstalled antivirus to be on safe side as i no it can conflict with odin and stuff
The problems you are having are purely driver issues. Try flashing the phone on another computer.
robogo1982 said:
The problems you are having are purely driver issues. Try flashing the phone on another computer.
Click to expand...
Click to collapse
ok thanks will try it on mine 2 moz cheers
Let us know if it worked
Try a different data cable it worked for me
Sent from my GT-I9505 using xda premium
Well I've had some problems too today and there a couple of things you might want to try (I'm sure one of them will fix it):
- Pick a different USB port (preferably one in the back)
- Try a different USB cable (I used one from my Nexus 7, didn't work. Tried with the original S4 cable, worked)
- Uninstall Kies and the Samsung drivers from you control panel -> programs
- Download the Samsung USB Drivers again (google it) (do not install them yet)
- Download and install USB Deview (google it) and delete every driver of Samsung you come across in the list (just right click and click delete)
- Disable your internet access and reboot
- After rebooting install the Samsung Drivers (without an internet connection)
- Plug in your phone after you've installed the drivers and enable USB Debugging
- Reboot
- Enable your internet connection again
- Try to flash again in Odin (it should work now)
If this won't work, I don't know what will. A different USB port, cable, fresh/original drivers (not the ones Windows Update may try to install for you), etc is probably what you'll need to get it working.
thanks for every ones help we installed a fresh copy of windows 7 and installed every thing again and it worked fine defo must of been driver related :laugh:
Cheers now flash away like there's no tomorrow
I've flashed my i9505 many times. I can't remember exactly what I've done, but now the situation is very weird.
1. I can go into Download mode. But Odin doesn't recognise it. Kies doesn't recognise it either. The error message on the bottom right corner of the screen says "USB device not recognized. Your usb device has malfunctioned." I've tried re-install the USB driver, use the original USB cable, even tried it on another PC with no luck. I suspect the very low level USB driver in the phone has corrupted because possibly I flash something wrong in the past.
2. I can go into Recovery mode and flash new ROMs in zip format from there.
3. I can use my phone normally, e.g. make phone call, SMS, WiFi......My computer can recognize my phone as usual when I am in Android.
Any thoughts? Helps are appreciated.
Hello,
Uninstall any previous installed of Samsung USB drivers, clean your Windows registry through CCleaner (not needed but highly suggested) then download and install latest Samsung USB drivers
Now download mode will be recognized on PC
Inviato dal mio GT-I9505
There is an easier way. If you are using windows, go into control panel-> Devices-> Right Click on your phone-> there should be a Driver Details-> Go details I think it is-> Uninstall driver-> Have the box ticked-> Uninstall-> Unplug then replug the cable in and it should work.
Sent from my Nexus 4 using XDA Free mobile app
AntaresOne said:
Hello,
Uninstall any previous installed of Samsung USB drivers, clean your Windows registry through CCleaner (not needed but highly suggested) then download and install latest Samsung USB drivers
Now download mode will be recognized on PC
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
I've tried to re-install the driver. I even tried to connect the phone to another PC where the driver had never been installed before. Nope.... it doesn't work. Actually, I've searched around in Google for long time. The most likely reason is the usb piece of Android code is corrupted. Well, maybe not android, it should be the lower layer of Linux. I previously installed dual boot system follow this link and I screw it up when I tried to upgrade the primary OS:
http://forum.xda-developers.com/showthread.php?t=2447534
procket said:
I've tried to re-install the driver. I even tried to connect the phone to another PC where the driver had never been installed before. Nope.... it doesn't work. Actually, I've searched around in Google for long time. The most likely reason is the usb piece of Android code is corrupted. Well, maybe not android, it should be the lower layer of Linux. I previously installed dual boot system follow this link and I screw it up when I tried to upgrade the primary OS:
http://forum.xda-developers.com/showthread.php?t=2447534
Click to expand...
Click to collapse
You said that in Android USB connection works.
The download mode depends on bootloader, that can't be touched in any way by Android, even you can't touch the bootloader.
It's also write-protected, you can only upgrade it through Odin or through an official OTA update, when flashed you can't downgrade and can't write on its partition if not through JTAG
Inviato dal mio GT-I9505
procket said:
I've flashed my i9505 many times. I can't remember exactly what I've done, but now the situation is very weird.
1. I can go into Download mode. But Odin doesn't recognise it. Kies doesn't recognise it either. The error message on the bottom right corner of the screen says "USB device not recognized. Your usb device has malfunctioned." I've tried re-install the USB driver, use the original USB cable, even tried it on another PC with no luck. I suspect the very low level USB driver in the phone has corrupted because possibly I flash something wrong in the past.
2. I can go into Recovery mode and flash new ROMs in zip format from there.
3. I can use my phone normally, e.g. make phone call, SMS, WiFi......My computer can recognize my phone as usual when I am in Android.
Any thoughts? Helps are appreciated.
Click to expand...
Click to collapse
Hi friend, did you found out how to fix this issue i have the same problem with a I9500 please help
banziitox24 said:
Hi friend, did you found out how to fix this issue i have the same problem with a I9500 please help
Click to expand...
Click to collapse
Sorry mate, I am still stuck in Odin. Since I can flash new ROM via recovery mode and everything else still works, I give up.
procket said:
Sorry mate, I am still stuck in Odin. Since I can flash new ROM via recovery mode and everything else still works, I give up.
Click to expand...
Click to collapse
Dang I have this phone here I can connect it in Odin but in normal mode it doesn't connect and I need it to connect so I can finish the IMEI Repair
change the modes of usb
try *#0808# mtp + adb or others
try *#9090# try all of them
best of luck
I can't update firmware using odin ,it keep saying not recognized ,any other ways can i flash firmware without using usb port? Hope anyone can help me
Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.
syverman said:
Did you try on another pc? Test it, maybe your pc is the one with the problem.
you can flash with out pc, sadly there are none rom at the moment to flash trough recovery.
Click to expand...
Click to collapse
i have try many cable, computer but its still same. its just charging on the phone and not recognized on pc. im stuck on unofficial miui with a lot of bugs, please give me someways to stock my firmware back without using odin or anything that use usb port because my usb port its just for charging only, not working for odin.
Rith click on computer and click on comlutef propeeties then ect device manager u will use warning icon in the list something name i am forget right click on it u will use option update driver click on it then select specific driver path where your driver are installed then search then Huh Huh xD restert your pc then connect your phone:good:
I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Sent from my SM-G530H using XDA Free mobile app
my SM-G530H connected and detected in windows but not on samsung kies
Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA)
Hi
I have Samsung Galaxy Grand Prime SM-G530/H/DV model (G530HXXU1ANIA) . I did factory Reset . Then TouchWiz stopped problem arose. I disabled TouchWiz and installed APUS Launcher. That worked fine. Then I want to give cell to another person. I did Factory Reset again. After this the following problems arose.
1- A pop up massage during booting arose. “Unfortunately Process com. Android. systemUI has been stopped”
2- Above mentioned message hang the cell on Main Screen, I can not operate any function.
3- IMEI No. INVALID.
4- Mobile cannot be accepted connection with PC, ODIN, Kies etc.
Kindly guide me in this regard as I am a beginner in the matter of programming etc.
M.Abdul Quddus from Pakistan
+923006021721
Did you get this sorted out and how ? I have a similar problem.
Sent from my SM-G530H using XDA Forums
redfeast said:
I think problem is with drivers you need reinstall device drivers, first uninstall ur device drivers from device manager then install samsung usb driver software from here ,now drivers will be installed automatically installed on connecting your phone
Download link is below
http://androidhost.org/XIVsA
Click to expand...
Click to collapse
I doubt it is a driver issue because I have tried multiple systems and these systems recognize other phones instantly
its the same from my phone sadly i didnt find any firmware for this its a clone i think
I finde what is wrong with my phone and why he wan't to connect on PC, but i still need your help
When i dial *#0808# and enter in USBSettings whn i set to MTP+ADB computer recognize the device, but when i need to start odin and put in donwload mode i need DM+MODEM+ADB for flash firmware but when i check this PC don't recognize my phone.I finde on internet that problem is for QualcomUSB settings but i don't know how to fix this
And sry for my bad english
Are you sure that you have downloaded Samsung USB drivers? If not then that's is what causing the problem and here is the solution:
1.download and install kies
2. Open kies
3. There must be an option to download the USB drivers
And here you go , you have fixed the issue
Sent from my GT-I9505 using Tapatalk
yahya wessam said:
Are you sure that you have downloaded Samsung USB drivers? If not then that's is what causing the problem and here is the solution:
1.download and install kies
2. Open kies
3. There must be an option to download the USB drivers
And here you go , you have fixed the issue
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
Drivers is not problem
I tryed with Kies drivers with other version of SamsungUSB driver, try to change computer with different operation system but problem still here :/
Problem is i think in modem.A problem occurred when i update my i9505 from android 4.4.2 to Lolipop and i searching on internet for this problem, but can't fix
Try using a different USB port on your computer. Odin sometimes gets very picky about the port it uses. Also, make sure you're using the original cable and not a hub. The symptoms you describe do not appear to be related to the modem settings, but to the PC itself.
Aahh i tryed different usb cable, port i tryed many computers and i think all win (Xp,Vista,Win7,Win8.1,Win10) :'(
One people here said that is problem in my hardware usb i bought new one and change but problem still here i don't have idea how to fix that
And again sry for my bad english