Here's the info of my s4:
Model number: GT-I9500
Baseband version: I9500ZSUDNF2
Build Number: ORG.I9500ZSUDNF2
Android version: 4.4.2
Bootloader version: E300LKLUFNG8
PDA Version: I9500ZSUDNF2
[*]CSC Version: I9500ZSUDNF2
Baseband version: E300LKLUFNG2
Original CSC code: LGT Firmware
CSC Code: CHN
Active CSC Code: LGT/CHN
CSC Country: Korea/WW
Product Code: not active
Phone Model: GT-I9500
Device type: jaltelgt
Product name: jaltelgt
Knox warranty void: 0x1
Root status: Rooted (I rooted my self). Before rooting the phone was perfect with knox working and all samsung official apps.
Country of origin: MADE IN KOREA
RAM: 2GB
Resolution: 1080x1920 pixels
Storage: 32GB
Camera: 12.8MP back 2.1 front
Chip: exynos 5410
Hardware/Board: Universal 5410 (32bit)
Modem Board: MDM9615
GPU: IT PowerVR SGX 544MP
Note: In download mode it says : SGH-E300L
These are specs of my phone. They are weird.. at some points it says mine is I9500 and then it says its e300L (korean version of s4) !
I will be thankful if you give me link of lollipop rom from SamMobile which will work with my E300L/i9500... whatever!
If download mode says it is SGH-E300L, then it is SGH-E300L.
Was the phone purchased new or used? Sounds like it could be a "frankenphone" with parts from two different models.
Your phone is E300L but installed i9500 firmware.
If you dont know, 2 devices above have the same hardware.
E300 is Korean version which includes a lot of bloatware, i9500 is international version.
Link for E300L firmware:
http://www.sammobile.com/firmwares/download/72767/E300LKLUGPE2_E300LLGTGPE2_LGT/
Related
After hours and hours of flashing through the various ROMs and firmwares since 4.2.2 and 4.3 on MF3, I've run in to one issue that I, and a scarce few others, have not been able to fix now matter how many combinations of flashes, modems, kernel modules, app fixes, and AGPS patches have been attempted.
The issue is that the GPS will not lock under any circumstances. All apps show no satellites in view. Google Maps will show your general location, but thats from the wifi.
The only success I've had so far is to use Hyperdrive or Gravitron on 4.3.
Personally, I think the problem is that I don't have a CSC in certain parts of the shone (See below: Firmware's CSC, CSC Country, CSC Country ISO, CSC Version all blank)
I've tried CSC changer apps and dialer codes, only to get one working, but it had no codes in the list, and no way to enter one.
Here is my phones current state:
(I been up to NC1 and just came back down to MK2 to try and get the GPS working. I intend to go to NI1 after)
GENERAL INFO
Manufacturer: samsung
Brand: samsung
Phone Model: SAMSUNG-SGH-I337
Device Type: jflteatt
Product Name: jflteuc
Country of Origin: MADE IN KOREA
Manufacturing Date: 2013.06.26
Knox Warranty Void: 0x0
CSC INFO
Original CSC Code: ATT
Firmware's CSC Code:
Active CSC Code: ATT
CSC Country:
CSC Country ISO:
Product Code: SEG-I337ZKAATT
DEVICE ID
IMEI: ##REMOVED##
Serial Number: ##REMOVED##
Samsung Serial Number: ##REMOVED##
FIRMWARE INFO
Bootloader Version: I337UCUFNB1
Baseband Version: I337UCUFNB1
PDA Version: I337UCUEMK2
CSC Version:
OS INFO
Changelist: 1921628
Build Number: JSS15J.I337UCUEMK2 (I337UCUEMK2)
Build Fingerprint: samsung/jflteuc/jflteatt:4.3/JSS15J/I337UCUEMK2:user/release-keys
Build Description: jflteuc-user 4.3 JSS15J I337UCUEMK2 release-keys
Build Date: Sat Nov 16 14:39:54 KST 2013
Android Version: 4.3
MISC INFO
Colour: Black
Internal Storage: 16 GB
Hardware: qcom
Board: MSM8960
Platform: msm8960
Chip: apq8064
Modem Board: MDM9215M
Hardware Revision: REV0.2
Mobile Operator Name: AT&T
Mobile Network Code: 310410
USAGE HISTORY
Headset Connect Counter: 1374
Charger Connect Counter: 2917
Last saved on: 01-Oct-2014 12:46:49
I would like to thank vndnguyen for writing the app that pulled my phone info and can change CSC:
Phone INFO http://forum.xda-developers.com/showthread.php?t=2609045
Without it, I would have never seen the blank values. I also think an output of this should be in every help thread. Everythings there!
I'm upgraded to NI1 now. Adding a /system/csc/ folder myself, then upgrading, fixed all my CSC issues. Still no GPS lock.
Hello there fellows, I have a Samsung Galaxy Note 3 SM-N900 running 4.4.2, here is detailed info about my phone
GENERAL INFO
Manufacturer: samsung
Brand: samsung
Phone Model: SM-N900
Device Type: ha3g
Product Name: ha3gxx
Country of Origin: MADE IN CHINA
Manufacturing Date: 2013.10.3
Knox Warranty Void: 0x0
Mobile Operator: 41004
CSC INFO
Original CSC Code: PAK
Firmware's CSC Code: PAK
Active CSC Code: PAK
CSC Country: PAKISTAN
CSC Country ISO: PK
Product Code: SM-N9000ZWEPAK
FIRMWARE INFO
Bootloader Version: N900XXUENH1
Baseband Version: N900XXUENG1
PDA Version: N900XXUENH1
CSC Version: N900OJVENG2
Kernel Version: 3.4.39-1955999 [email protected] #1
OS INFO
Changelist: 1955999
Build Number: KOT49H.N900XXUENH1 (N900XXUENH1)
Build Fingerprint: samsung/ha3gxx/ha3g:4.4.2/KOT49H/N900XXUENH1:user/release-keys
Build Description: ha3gxx-user 4.4.2 KOT49H N900XXUENH1 release-keys
Build Date: Sun Aug 31 16:14:30 KST 2014
Android Version: 4.4.2
HARDWARE INFO
Colour: White
Internal Storage: 32 GB
Hardware: universal5420
Board: universal5420
Platform: exynos5
Chip: exynos5420
Modem Board: XMM6360
Hardware Revision: MP 0.600
Total RAM: 2.66 GB
Screen: 5.69 inches, 1080 × 1920 pixels
Battery: Li-ion 2100 mAh, Health: Good
Now my question is, I want to update it to Lollipop. What is the best and the safest way to update it? Like which version of flash file should I download? Which odin version I should use and Which files I need to flash liek AP, CSC and stuff like that?
I will be grateful for your help fellows, thank you in advance.
You are lucky to have the international version. Just go to settings, and check for updates.
Sent from my SM-N910T using XDA Free mobile app
yoncher2000 said:
You are lucky to have the international version. Just go to settings, and check for updates.
Sent from my SM-N910T using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for the reply but there is no update available in my country.
I downloaded the stock lollipop firmware from sammobile and then flashed in AP section of Odin 3.09
Everything is working flawlessly
saaqirajput said:
Thanks for the reply but there is no update available in my country.
I downloaded the stock lollipop firmware from sammobile and then flashed in AP section of Odin 3.09
Everything is working flawlessly
Click to expand...
Click to collapse
I Have a question to ask i have the same phone u have >> do i need to flash firmware with the same PDA only .. all firmwares that matches my pda are 4.4.2 and i want lollipop.. can i flash any other safely ???
same problem here
There is no problem.
Just flash whatever you want, which matches your model
Hi,
I have Note 4 N910F from friend running stock ROM 5.0.1 but with "unknown" baseband and "null" IMEI. I have tried many times flashing stock ROM via ODIN but no luck. I don't have efs backup and I don't know what was my Note 4's IMEI. I don't have the box and the sticker beside the battery was removed. :'(
Can you please help me how can I fix "unknown" baseband and "null" IMEI?
Please see below information from "Phone Info Samsung" apk.
Phone Model: SM-N910F
Device Type: trlte
Product Name: trltexx
Country Origin: <blank>
Manufacturing Date: <blank>
Knox Warranty Void: 0x1
Product Code: <blank>
Original CSC Code: TPD
Firmware's CSC Code: TPD
Active CSC Code: TPD
CSC Country: The Netherlands / NL
Bootloader Version: N910FXXU1BOC3
PDA Version: N910FXXU1BOC3
CSC Version: N910FTPD1BOC1
Baseband Version: <blank>
Latest Firmware: N910FXXS1CPC1/N910FTPD1COI1/N910FXXS1COK1
Root Existence: Yes
Android Version: 5.0.1
Build Number: LRX22C.N910FXXU1BOC3
Build Description: trltexx-user 5.0.1 LRX22C N910FXXU1BOC3 release-keys
Hardware / Board: qcom / APQ8084 [32-bit]
Platform / Chip: APQ8084
GPU: Qualcomm Adreno 420
Modem Board: <blank>
Hardware Revision: <blank>
IMEI: <blank>
Android Serial Number: 1683d8ac
Samsung Serial Number: <blank>
Thanks.
sondee04 said:
Hi,
I have Note 4 N910F from friend running stock ROM 5.0.1 but with "unknown" baseband and "null" IMEI. I have tried many times flashing stock ROM via ODIN but no luck. I don't have efs backup and I don't know what was my Note 4's IMEI. I don't have the box and the sticker beside the battery was removed. :'(
Can you please help me how can I fix "unknown" baseband and "null" IMEI?
Please see below information from "Phone Info Samsung" apk.
Phone Model: SM-N910F
Device Type: trlte
Product Name: trltexx
Country Origin: <blank>
Manufacturing Date: <blank>
Knox Warranty Void: 0x1
Product Code: <blank>
Original CSC Code: TPD
Firmware's CSC Code: TPD
Active CSC Code: TPD
CSC Country: The Netherlands / NL
Bootloader Version: N910FXXU1BOC3
PDA Version: N910FXXU1BOC3
CSC Version: N910FTPD1BOC1
Baseband Version: <blank>
Latest Firmware: N910FXXS1CPC1/N910FTPD1COI1/N910FXXS1COK1
Root Existence: Yes
Android Version: 5.0.1
Build Number: LRX22C.N910FXXU1BOC3
Build Description: trltexx-user 5.0.1 LRX22C N910FXXU1BOC3 release-keys
Hardware / Board: qcom / APQ8084 [32-bit]
Platform / Chip: APQ8084
GPU: Qualcomm Adreno 420
Modem Board: <blank>
Hardware Revision: <blank>
IMEI: <blank>
Android Serial Number: 1683d8ac
Samsung Serial Number: <blank>
Thanks.
Click to expand...
Click to collapse
No modem... It could be a demo unit.
Have a look at this thread http://forum.xda-developers.com/note-4/help/baseband-version-unknown-network-t2986658
lucaoldb said:
No modem... It could be a demo unit.
Have a look at this thread http://forum.xda-developers.com/note-4/help/baseband-version-unknown-network-t2986658
Click to expand...
Click to collapse
Hi Bro,
I saw that thread but I haven't found such application as "Samsung Retailmode" on my app drawer. I tried to download it but it says "Unable to find retail media expansion file". Also, after I Odin the stock ROM, no Samsung Retail mode on my app drawer.
Is there any way that I can confirm that my unit is a retail one?
Thanks,
sondee04 said:
Hi Bro,
I saw that thread but I haven't found such application as "Samsung Retailmode" on my app drawer. I tried to download it but it says "Unable to find retail media expansion file". Also, after I Odin the stock ROM, no Samsung Retail mode on my app drawer.
Is there any way that I can confirm that my unit is a retail one?
Thanks,
Click to expand...
Click to collapse
Hi, I seem to understand that the goal of such app is to turn a fully functional phone into a retail one.. But the actual demo units do not have the hardware, that is no modem at all, it is not a matter of software. From the info you get, it actually looks there is no modem and hardware can't easily be added... If I were in your shoes, I would look for some YouTube videos where someone opens the phone and shows how it is built... If it is due to some lacking hardware, it should be possible to detect what is missing.
Hi all.
Hoping someone can help me, and I apologise if this is a stupid question.
I've got an S7 edge I purchased from Carphone warehouse a SIM free. I've then got myself a SIM only deal from 3UK (H3G).
I know that Android 7 firmware had been released for BTU handsets, but not XEU. I have seen though, that it is available through 3 themselves.
Does that mean I can flash this to my phone:
https://www.sammobile.com/firmwares/database/SM-G935F/H3G/
Handset details:
Phone model: SM-G935F
Device type: hero2lte
Product name: hero2ltexx
Product code: SM-G935FZKAXEU
Firmware CSC code: XEU
Active CSC code: XEU
CSC country: UK & IRE / GB
Mobile operator: 3 / 23420
Firmware: G935FXXU1BPJG
PDA version: G935FXXU1BPJG
CSC Version: G935XEU1BPK2
Baseband version: G935FXXU1BPJG
Kernel version: 3.18.14-9519568
[email protected] #1
64-bit
Java virtual machine: ART 2.1.0
Android version: 6.0.1
Build number: MMB29K.G935FXXU1BPJG
Platform / Chip: exynos5 / exynos8890
Modem board: SHANNON335
Thanks in advance.
Jon
Hi all,
I am a newbie and I would like to ask for help with my Samsung S7 Edge International version SM-G9350 HERO2QLTECHN. I purchased this phone from my local hometown in the US. The phone was sold "as is" when I bought it. So far the phone is working but I am not able to have any update from my Carier "T-mobile". The phone was blocked/prohibited to have a lot features that I needed. I recently do a research about the phone and find your web site is very helpful. I am not a phone expertise like most of you but I can follow the instructions how to do things. I downloaded the app "CSC phone info" from play store and have all of the info about this phone. Please see the specifications below and let me know what is the best fit to this phone like ROM, Firmware, latest Android OS, and etc... I would like and willing to risk anything that will work out for my phone. This phone doesn't have warranty anymore so I'm not worry about the warranty void.
Below is a report from the Play Store app: "CSC Phone Info"
1.General
Manufacturer/Brand: Samsung
phone model: Galaxy s7 edge
Device Type: hero2qltechn/htc6580_weg_a_l
Product Name: hero2qltezc
Country of Origin: (Blank)
Manufacturing Date: (Blank)
Knox Warranty Void: Warranty bit not found
2. CSC Code
Product code: (Blank)
Original CSC Code: (Blank)
Firmware's CSC Code: (Blank)
Active CSC Code: (Blank)
Available CSC Codes: (Blank)
CSC Country: (Blank)
Mobile Operator: T-Mobile/310260
3. FIRMWARE
Bootloader Version: Unknown
PDA Version: (Blank)
CSC Version: (Blank)
Baseband Version: MOLY.WR8.W1449.MD.WG.MP.V23.P8, 2016/07/25 16:07
Latest Firmware: Forbidden
Kernel Version: 3.10.0-2828982
[email protected] #1 32-bit
4. ANDROID
Root Existence: Yes
Android Version: 6.0.1
Build Number: MMB29M.G9350ZCU2APD1
Build Fingerprint: samsung/hero2ltexx/hero2lte:6.0.1
MMB29K/G935FXXU1APAVA:user/release-keys
Build Description: hero2ltexx-user 6.0.1 MMB29K/G935FXXU1APAVA release-keys
Build Date: Thu Oct 27 09:28:31 CST 2016
5. Hardware
Hardware Board: mt6580 [32-bit]
Platform / Chip: mt6580
GPU (Graphics Processing Unit): ARM Mali-400 MP
Modem Board: (Blank)
Hardware Revision: (Blank)
Total RAM: 3.91 GB
Screen: 4.59 inches, 720x1280 Pixels, 320 ppi, 320 dpi
6. Personal
DEVICE ID
IMEI: xxxxxxxxxxxxxxxxx
Android Serial Nunber: (Blank)
SamSung Serial Number: --------------
7. MONITOR
CPU Temperature: 37.0 C
Battery Temperature: 25.0 C
Ambient Temperature: N/A
CUP Usage: 0%
Memory Usage: 48%
Battery Status: 4259mv /99%
Signal Strength: -93dBm
=======================================
I Checked the device by entering *#1234# from the phone pad, it showed on the phone:
AP: G930FXXU1BPIA
CP: G930FXXU1BPHJ
CSC: G930FOZS1BPIA
Model: Galaxy s7 edge
************************************
I am sorry for the long list. Please help me to find out what I need to do for this phone. I am very devastating/frustrating after buying the phone without knowing the problems came after. I believe this phone can be fixed and I have hoped for it. Thank you for your help.
Spring Xuan
@Springxuan, You should have posted under the S7 Edge Q&A section where you'll get more advice with questions of this nature.
Mods, can we probably move this to Q&A?
Springxuan said:
Hi all,
I am a newbie and I would like to ask for help with my Samsung S7 Edge International version SM-G9350 HERO2QLTECHN. I purchased this phone from my local hometown in the US. The phone was sold "as is" when I bought it. So far the phone is working but I am not able to have any update from my Carier "T-mobile". The phone was blocked/prohibited to have a lot features that I needed. I recently do a research about the phone and find your web site is very helpful. I am not a phone expertise like most of you but I can follow the instructions how to do things. I downloaded the app "CSC phone info" from play store and have all of the info about this phone. Please see the specifications below and let me know what is the best fit to this phone like ROM, Firmware, latest Android OS, and etc... I would like and willing to risk anything that will work out for my phone. This phone doesn't have warranty anymore so I'm not worry about the warranty void.
Below is a report from the Play Store app: "CSC Phone Info"
1.General
Manufacturer/Brand: Samsung
phone model: Galaxy s7 edge
Device Type: hero2qltechn/htc6580_weg_a_l
Product Name: hero2qltezc
Country of Origin: (Blank)
Manufacturing Date: (Blank)
Knox Warranty Void: Warranty bit not found
2. CSC Code
Product code: (Blank)
Original CSC Code: (Blank)
Firmware's CSC Code: (Blank)
Active CSC Code: (Blank)
Available CSC Codes: (Blank)
CSC Country: (Blank)
Mobile Operator: T-Mobile/310260
3. FIRMWARE
Bootloader Version: Unknown
PDA Version: (Blank)
CSC Version: (Blank)
Baseband Version: MOLY.WR8.W1449.MD.WG.MP.V23.P8, 2016/07/25 16:07
Latest Firmware: Forbidden
Kernel Version: 3.10.0-2828982
[email protected] #1 32-bit
4. ANDROID
Root Existence: Yes
Android Version: 6.0.1
Build Number: MMB29M.G9350ZCU2APD1
Build Fingerprint: samsung/hero2ltexx/hero2lte:6.0.1
MMB29K/G935FXXU1APAVA:user/release-keys
Build Description: hero2ltexx-user 6.0.1 MMB29K/G935FXXU1APAVA release-keys
Build Date: Thu Oct 27 09:28:31 CST 2016
5. Hardware
Hardware Board: mt6580 [32-bit]
Platform / Chip: mt6580
GPU (Graphics Processing Unit): ARM Mali-400 MP
Modem Board: (Blank)
Hardware Revision: (Blank)
Total RAM: 3.91 GB
Screen: 4.59 inches, 720x1280 Pixels, 320 ppi, 320 dpi
6. Personal
DEVICE ID
IMEI: xxxxxxxxxxxxxx
Android Serial Nunber: (Blank)
SamSung Serial Number: --------------
7. MONITOR
CPU Temperature: 37.0 C
Battery Temperature: 25.0 C
Ambient Temperature: N/A
CUP Usage: 0%
Memory Usage: 48%
Battery Status: 4259mv /99%
Signal Strength: -93dBm
=======================================
I Checked the device by entering *#1234# from the phone pad, it showed on the phone:
AP: G930FXXU1BPIA
CP: G930FXXU1BPHJ
CSC: G930FOZS1BPIA
Model: Galaxy s7 edge
************************************
I am sorry for the long list. Please help me to find out what I need to do for this phone. I am very devastating/frustrating after buying the phone without knowing the problems came after. I believe this phone can be fixed and I have hoped for it. Thank you for your help.
Spring Xuan
Click to expand...
Click to collapse
Edit your post and don't EVER show your IMEI
"Zed?Zed's dead baby...Zed's dead "
Sent from my Echoe Powered Official Nougat G935f
did you get an solution for this
shabu1978 said:
did you get an solution for this
Click to expand...
Click to collapse
No. I still don't have a good solution for this phone yet. Thanks for asking. I am using this phone for testing now. Even though the phone is working but I need to learn how to put all information back from the original. The phone is not very bad one but it is hard to find supports (unfortunate that the phone was made in Vietnam but it was a clone/fake one). I would like to know if someone in the forum has the same phone I have in order to learn/trade any idea with him/her about that phone. I do a lot research but I couldn't get the info of this phone like how to start to build over from scratch. I have downloaded some of the firmware from needrom site for my phone specification but it didn't work. But if I used a different firmware like SM-G930F it worked (The one I have from the back of the phone was Samsung S7 Edge, SM-G9350, MT6580). I was so confused. If you know which link or web site that has a lot of firmware supports for this phone model please let me know. Again thank you in advance!
Springxuan
about S7 edge clone
bro i'm also got this phone can you tell me how much internal memory of you s7 clone ?
when i reset my s7 clone its got some issues
can you got its official rom ?
Dont post clone S7 thread under the genuine S7 forum.
It's inappropriate!