No Os Instaled! - Lenovo A6000/Plus Questions & Answers

Guys i have a problem with my lenovo a6000. Pliss help me , i want to format factory my smartphone cause to lag so i use advanced option in menu and i √data √system and √cache... so i restarting then "NO INSTALED OS" (twrp say) And my phone stuck on logo android .
Pliss help me out guys :'( please......

Yolanda mongkau said:
Guys i have a problem with my lenovo a6000. Pliss help me , i want to format factory my smartphone cause to lag so i use advanced option in menu and i √data √system and √cache... so i restarting then "NO INSTALED OS" (twrp say) And my phone stuck on logo android .
Pliss help me out guys :'( please......
Click to expand...
Click to collapse
(I think) you need to flash a rom.

neerut said:
(I think) you need to flash a rom.
Click to expand...
Click to collapse
yeah u r ryt... if u want to do a factory reset then u should just wipe the data not the system u need to perform a flashing of rom

Boot to recovery without OS
Yolanda mongkau said:
Guys i have a problem with my lenovo a6000. Pliss help me , i want to format factory my smartphone cause to lag so i use advanced option in menu and i √data √system and √cache... so i restarting then "NO INSTALED OS" (twrp say) And my phone stuck on logo android .
Pliss help me out guys :'( please......
Click to expand...
Click to collapse
For lenovo a6000 plus hold volume down +power once the mobile will to boot(you will screen like Powerkey long press can reboot phone). once it's came connect your phone with pc the follow the steps.
1. Google for Minimal ADB and fastboot, you will get a zip file package, install it.
2. then go that minimal ADB folder in C:\ and press shift and right click on mouse, select use command prompt here. it will take to DOS screen
3. copy this TWRP recovery.img in that minimal adb folder(C:\minimal adb). Link here. http://forum.xda-developers.com/andr...a6000-t3156149
4. now type fastboot devices in command prompt
5. It will show list of devices attached, it will show only if your phone is in fastboot mode.
6. then enter the following command: fastboot boot recovery.img
7. Wait for few seconds, it will load TWRP automatically

varun4495 said:
yeah u r ryt... if u want to do a factory reset then u should just wipe the data not the system u need to perform a flashing of rom
Click to expand...
Click to collapse
So were i find rom for lenovo a6000?

varun4495 said:
yeah u r ryt... if u want to do a factory reset then u should just wipe the data not the system u need to perform a flashing of rom
Click to expand...
Click to collapse
SureshRSB said:
For lenovo a6000 plus hold volume down +power once the mobile will to boot(you will screen like Powerkey long press can reboot phone). once it's came connect your phone with pc the follow the steps.
1. Google for Minimal ADB and fastboot, you will get a zip file package, install it.
2. then go that minimal ADB folder in C:\ and press shift and right click on mouse, select use command prompt here. it will take to DOS screen
3. copy this TWRP recovery.img in that minimal adb folder(C:\minimal adb). Link here. http://forum.xda-developers.com/andr...a6000-t3156149
4. now type fastboot devices in command prompt
5. It will show list of devices attached, it will show only if your phone is in fastboot mode.
6. then enter the following command: fastboot boot recovery.img
7. Wait for few seconds, it will load TWRP automatically
Click to expand...
Click to collapse
I try it , but twrp still say 'no os instaled' , please help me guys...

Yolanda mongkau said:
I try it , but twrp still say 'no os instaled' , please help me guys...
Click to expand...
Click to collapse
This link has expired guy, please give me a link to download the zip

Restart your recovery will solve the problem.

@Yolanda mongkau ==>> Thats not a problem. You can easily recover your phone. I don't understand why all these guyz are suggesting totally irrelevant solutions.
So Look, first download a ROM for your device. I suggest to use MIUI FROM HERE. Then transfer it to your phone, internal or external memory doesn't matter.
Now boot into TWRP, wipe system, data, cache, dalvik in advanced wipe option.
Now if you were on Kitkat earlier first flash this zip by going to the install option and then locating this zip. You don't need to flash it if you were on any Lollipop or Marshmallow ROM.
Now, flash the MIUI rom and you are done..!!

https://www.youtube.com/watch?v=Aejq4DW4XOA
try this, it should work out coz it happened with me too

Yolanda mongkau said:
Guys i have a problem with my lenovo a6000. Pliss help me , i want to format factory my smartphone cause to lag so i use advanced option in menu and i √data √system and √cache... so i restarting then "NO INSTALED OS" (twrp say) And my phone stuck on logo android .
Pliss help me out guys :'( please......
Click to expand...
Click to collapse
Hi,
It was happened once to me also.
I tried with the steps of http://forum.xda-developers.com/showthread.php?t=2380913
Try with a6000 system image like stock ROM or custom ROM..
May be this will help you also.
IBS
---------- Post added at 09:00 AM ---------- Previous post was at 08:50 AM ----------
Yolanda mongkau said:
Guys i have a problem with my lenovo a6000. Pliss help me , i want to format factory my smartphone cause to lag so i use advanced option in menu and i √data √system and √cache... so i restarting then "NO INSTALED OS" (twrp say) And my phone stuck on logo android .
Pliss help me out guys :'( please......
Click to expand...
Click to collapse
Hi,
Download the a6000 minimal adb folder from here & then do the required steps as per the thread
http://forum.xda-developers.com/lenovo-a6000/development/twrp-lenovo-a6000-a6000-t3156149

how do we transfer the rom file? just copy it using computer?

Related

Serious issue

i urgently need help
I got some update from lg and after i agreed to install
phone doesn't boot
it goes into TWRP recovery
i tried putting it on download mode but its not happening
I tried hard resetting too
i deleted data and hence i dont have any files on my internal storage
I dont have a OTG cable .
pls help me out
i cant use terminal command also because there are no files in recovery folder
digkong said:
i urgently need help
I got some update from lg and after i agreed to install
phone doesn't boot
it goes into TWRP recovery
i tried putting it on download mode but its not happening
I tried hard resetting too
i deleted data and hence i dont have any files on my internal storage
I dont have a OTG cable .
pls help me out
i cant use terminal command also because there are no files in recovery folder
Click to expand...
Click to collapse
whether you can get into recovery and give you the download mode?Do you sec when starting up the phone LG logo?
Open LG supotr tool, connect your phone in download mode the tool detects the phone click on the option (top right corner) select upgrade recovery. PC will begin to download your original SW. wait and let the tool after the download and install SW (about 1 hour)
-installed drivers needed
-charged battery (90-100%)
Keep calm, pal !
Boot in TWRP, then "Advanced", then "Terminal Command" !
COPY THE FOLLOWING LINE VERY CAREFULLY : NO MISTAKE ALLOWED !
Code:
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/fota
Then reboot, it should work !
And remember : NO update from LG via OTA when rooted on the G2 !
rohecla said:
And remember : NEVER take OTA update when rooted on any phone!
Click to expand...
Click to collapse
Fixed.

P9-lite bricked. Please help!!

SOLVED!
Hi all i just bricked my phone : P9-lite VNS-L31
I managed to unlock bootloader, install twrp and get root permission. Phone worked great. Then i tried to flash xposed and the operation fails due to not enough memory space (!! i have 6gb) and get stuck in bootloop. I made all the possible things i knowed. Tried to use xposed-unistaller.zip (getting other errors like: "no such file o direcory") , wipe cache,dalvik and data and i try also to reflash stock recovery, and to relock bootloader (i can't do that.. why? i get FAILED <remote: command not allowed>) because erecovery and HiSuite can't restore my phone. What can i do?? It's a simple bootloop but i cant restore it. Please help me i have just bought the phone and now i'm very desperate.
I really hope some can help,
Thank you
Can you flash the stock rom through SD card?
Copy the stock rom file to this path: sd card\dload\UPDATE.APP,
Then, presss Volume + , Volume -, and the power keys to force upgrade your phone.
Hi, i solved my problem flashing system.img extracted by an official firmware. Everything ok. If someone need it i can write a little guide now to restore bricked p9-lite with custom recovery and unlocked bootloader (the normal procedure does not work)
Zeph1990 said:
Hi, i solved my problem flashing system.img extracted by an official firmware. Everything ok. If someone need it i can write a little guide now to restore bricked p9-lite with custom recovery and unlocked bootloader (the normal procedure does not work)
Click to expand...
Click to collapse
would you be so kind pls , and could you do the guide for me ? i somehow managed to ruin my phone , i can enter recovery , i can enter erecovery (wont download anything)
but what ever i tried didnt work :/ im getting kinda tilted , cus im trying to solve it for like 7hrs .. and im starting to be alot upset about it .. its like first time i cant repair it my self .. it hurts man (
so thanks for any help
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Zeph1990 said:
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Click to expand...
Click to collapse
with pressing volume - and power i enter into erecovery from there i should use fastboot to flash system.img ? sorry for being dum
edit: when in erecovery (volume- and power) typing fastboot flash system with full path , does nothing .. only saying waiting for device
edit2: no matter what i do , i cant fastboot flash system .. waiting for device .. only thing i can do is enter TWRP (also got root) , enter Erecovery and thats it .. phone only boots to huawei animation along wiht sound and thats it .. i tried adb sideload from TWRP but no help also .. guess there is nothing i can do right ?
Edit3: so i booted via TWRP to bootloader , used that fastboot command , flashed system , wiped cache , and now it is looking that phone is booting up !
thanks bro , any way i can pay you back ? cus you da MVP here !
EDIT4: well phone booted , rebooted , and now i cant enter recovery it boots into erecovery and i cant do nothing else
EDIT5: got into fastboot menu in phone , it says update system again , Error Func NO : 10 (boot image) Error NO : 2 (load failed)
EDIT6: somehow made it into fastboot , somehow flashed recovery , managed to restore my phone from back up , but sadly enough i cant restore it via google , since when i try to log in it says waiting .. dam this phone . i had galaxy S .. got this huawei just for pokemon go (which is pretty ****ty without gyro) FML right
EDIT7: lost most of my hairs .. some of them were ripped out in some anger explosions .. chewed of some of my nails .. but somehow i made it ! now if i only could unroot and relock bootloader xD think im gonna take a break for now and when my nerves will calm down i may try it again . Rly wanna thank you from all of my heart for help , thanks !! your the best man , thanks again
Sorry, can you normally boot and use your phone now?
Edit: It seems you can boot. Now you have restored your twrp recovery. I don't know why you have problems with google log in, but hey now it boots!
Zeph1990 said:
Sorry, can you normally boot and use your phone now?
Edit: It seems you can boot. Now you have restored your twrp recovery. I don't know why you have problems with google log in, but hey now it boots!
Click to expand...
Click to collapse
i cant thank you enough , without you i couldnt achieve this so thanks again !!
finaly did everything .. and only thing left is get bootloader locked and unroot it hope i will somehow find the way
So happy to hear it! =)
I tried also to relock bootloader during my attempts to unbrick the phone but i fail.. i don't know why, but i think someone was able to do it.
Zeph1990 said:
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Hope this can help.
Click to expand...
Click to collapse
Where did you launch the command? I can't do it in the huawei update extractor... Please help!!
Thank you.
ElPinguShow said:
Where did you launch the command? I can't do it in the huawei update extractor... Please help!!
Thank you.
Click to expand...
Click to collapse
Hi, if you don't know what is fastboot maybe you can approach it the easy way.
Download and install this for the correct drivers : http://consumer.huawei.com/minisite/HiSuite_en/index.html
Download and extract to a folder this : https://mega.nz/#!B4tATA5D!-TseQ9A-TPEQhzNQRXsT_cV2i4T7qYYLadceW0fM8k0
Put your phone in fastboot mode : Turn it off. Connect it to your pc . Long press vol - and power until it boots in fastboot mode (white screen with a green android and other stuff). If you want you can boot in fastboot from TWRP recovery : restart -> bootloader.
Copy your extracted SYSTEM.IMG in the root path of the tool (we can assume its name is system.img).
Now launch the tool and press 000 and enter.
If you have done all right now you can give this : fastboot flash system system.img
Wait about 3 minutes. Perform a cache and dalvik cache wipe. Boot your phone.
Zeph1990 said:
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Click to expand...
Click to collapse
Hi,
I am using the standard P9, and getting the Boot Loop also.
I attempted your instructions, and appeared to work - I got the first EMUI initialization screen - and now its gone back to how it was.
Any suggestions?
I think it should work on every phone assuming you are using the right firmware. Do you use the right firmware for the huawei P9 ?? (needless to say it's not the version i posted)).
So if you flashed the right firmware (and i'm pretty sure of this) my advice is to perform a full wipe : Cache, dalvik and data.
If you are still facing the same error consider flashing other frimware parts like boot.img ecc.
I believe so - I am pretty clueless with this stuff.
By firmware, do you mean the stock version? Because I used P9-EVAL09-EVA-B136. Don't suppose you would know the right firmware I require?
I think it's the right version. I am a p9lite user so i don't know specifically the right version of the firmware but i think it's ok. Do you tried a full wipe?
Zeph1990 said:
I think it's the right version. I am a p9lite user so i don't know specifically the right version of the firmware but i think it's ok. Do you tried a full wipe?
Click to expand...
Click to collapse
How can I perform a full wipe? Thanks for replying by the way
So, do you have unlocked bootloader and custom recovery (TWRP) ?
Zeph1990 said:
So, do you have unlocked bootloader and custom recovery (TWRP) ?
Click to expand...
Click to collapse
I do yes
So, go in twrp recovery (turn off phone, long press vol up and power for at least 3 seconds). When you are in you will see 'WIPE' press it then do the swipe to Factory Reset. You will lost your installed apps and the relative settings but you will not lost your personal stuff such photo,music documents ecc. Let me know if you perform it and if it works =)
It appears that TWRP no longer appears. I get thr EMUI options to wipe data/factory reset. But once I do this I just get a red exclamation mark.
Does the phone need to be plugged in via USB?

Unable to go into fastboot mode

Iam a new one to these rooting and all and I rooted and installed cyanogen mod . That is fine . I forgot to flash gapps while flashing that custom rom. Now Iam not able to go to the recovery menu .It is not even showing twrp . Even in my pc it is not showing any fastboot devices when I type fastboot devices. Previously everything is fine before this cyanogen mod . When this cyanogen mod came I have not went to the recovery atleast once . Some seniors please help me..........
bvsbrk said:
Iam a new one to these rooting and all and I rooted and installed cyanogen mod . That is fine . I forgot to flash gapps while flashing that custom rom. Now Iam not able to go to the recovery menu .It is not even showing twrp . Even in my pc it is not showing any fastboot devices when I type fastboot devices. Previously everything is fine before this cyanogen mod . When this cyanogen mod came I have not went to the recovery atleast once . Some seniors please help me..........
Click to expand...
Click to collapse
Please let me know your current ROM and previous ROM.
Power+Vol down.
Get into bootloader mode by selection keys.
Then type fastboot boot recovery.img
Before this let me know your exact ROM version.
Hope this helps.
Iam using Resurrection Remix -M-v5.7.1-20150719-A6000 and my previous rom is the inbuilt one that comes with purchasing lenovo a6000 plus
bvsbrk said:
Iam using Resurrection Remix -M-v5.7.1-20150719-A6000 and my previous rom is the inbuilt one that comes with purchasing lenovo a6000 plus
Click to expand...
Click to collapse
1. Install Minimal ADB and Fastboot from following thread link
2. Download the recovery [SDK 22/23 (5.1.X/6.X)] TWRP 3.0.2.0 from following link Recovery for Lenovo A6000
3. Replace recovery.img of SDK 22/23 to minimal ADB and Fastboot installation folder
4. Now do the following steps & thanks to @Mr.AW
a. Enter to fastboot
b. Turn off your phone
c. Hold on the volume down key and hold on the power button
d. Wait until lenovo logo appears with small text "Powerkey long press can reboot phone" at the bottom of the screen
e. Connect your phone to your PC
f. Type "fastboot boot recovery.img" (without quotes). Wait until you land on TWRP recovery
I hope, now you can land into recovery mode.
bro I did each and every step above way before. Each time Iam ending up with the resurrection remix logo and nothing comes after that. Even from pc it is saying waiting for any device when I type fastboot boot recovery.img. Any way thanks for your reply
bvsbrk said:
bro I did each and every step above way before. Each time Iam ending up with the resurrection remix logo and nothing comes after that. Even from pc it is saying waiting for any device when I type fastboot boot recovery.img. Any way thanks for your reply
Click to expand...
Click to collapse
Which recovery image you flashed?
You should flash only MM's[sdk22/23.]
My phone lenovo A6000 didnt detect as qualcomm
bro it is showing wating for any device though I installed all the drivers
IbS285 said:
Which recovery image you flashed?
You should flash only MM's[sdk22/23.]
Click to expand...
Click to collapse
Try this it will work
http://forum.xda-developers.com/len...lenovo-a6000-plus-stuck-booting-logo-t3437378
bvsbrk said:
Click to expand...
Click to collapse
Make sure if fastboot driver installed properly by "fastboot devices" command.
Bro when I was in base rom (lollipop) it worked but when I flashed cm then onwards it is showing waiting for device. I dont know how to install fastboot drivers .plz help me
bvsbrk said:
Bro when I was in base rom (lollipop) it worked but when I flashed cm then onwards it is showing waiting for device. I dont know how to install fastboot drivers .plz help me
Click to expand...
Click to collapse
Check out here:-http://forum.xda-developers.com/showthread.php?t=2277112
thanks bro
I am also having same problem...my current ROM is ressurection remix 7.1.2 and while I was flashing ROM and gapps....flashing of gapp failed now recovery mode is not opening
I Can't boot into recovery mode
in my lenovo a6000 mobile fastboot mode is not working
I have boot into recovery mode via PC But is nir working
plsssssssssssssss help me

Lenovo K6 without OS

Hi, I already had my phone rooted and with TWRP installed, but I needed to restore my phone. First I did this trough the system, but I noted that a lot of old files still were there, and I went to TWRP and did a wipe, but selected /system and /cache, now I don't have a OS on my phone.
The phone doesn't turn off, everytime I try to power off, he turn on again, and stay on Lenovo logo. The only thing I can acess is Fastboot mode (via Power down + power), I cant acess TWRP trough the phone, but I found a .bat file, that when I'm in fastboot mode, it flashes twrp on my phone and I can acess it . The other problem is that I always get an error when trying to flash any rom. Things like Error:255 or ".zip file not valid". Tried 2 roms and nothing.
Can someone please help me? I would prefer a stock rom for Brazil, but now I just want any rom, dont even mind if it's not stock.
Crolys said:
Hi, I already had my phone rooted and with TWRP installed, but I needed to restore my phone. First I did this trough the system, but I noted that a lot of old files still were there, and I went to TWRP and did a wipe, but selected /system and /cache, now I don't have a OS on my phone.
The phone doesn't turn off, everytime I try to power off, he turn on again, and stay on Lenovo logo. The only thing I can acess is Fastboot mode (via Power down + power), I cant acess TWRP trough the phone, but I found a .bat file, that when I'm in fastboot mode, it flashes twrp on my phone and I can acess it . The other problem is that I always get an error when trying to flash any rom. Things like Error:255 or ".zip file not valid". Tried 2 roms and nothing.
Can someone please help me? I would prefer a stock rom for Brazil, but now I just want any rom, dont even mind if it's not stock.
Click to expand...
Click to collapse
Error 255 is caused because you are trying to install a 64bit ROM over TWRP (32bits), you need to upgrade TWRP to 64bit, just so you will be able to install a ROM. Remember that you should use Gapps in 64bit [ARM64]
TWRP: https://dl.twrp.me/karate/twrp-3.1.1-1-karate.img
Gapps: http://opengapps.org/ (ARM64)
J.D.M said:
Error 255 is caused because you are trying to install a 64bit ROM over TWRP (32bits), you need to upgrade TWRP to 64bit, just so you will be able to install a ROM. Remember that you should use Gapps in 64bit [ARM64]
Click to expand...
Click to collapse
I already had this version of twrp, but downloaded anyway and got the same error when tring to sideload a ROM "Updater process ended with ERROR: 255" . I don't know what to do anymore, I tried with 4 different ROMs, also I searched for a method to erase the lines with asserts on "update-scripts" in META-INF, but then I got a "Invalid ZIP file" error.
Crolys said:
I already had this version of twrp, but downloaded anyway and got the same error when tring to sideload a ROM "Updater process ended with ERROR: 255" . I don't know what to do anymore, I tried with 4 different ROMs, also I searched for a method to erase the lines with asserts on "update-scripts" in META-INF, but then I got a "Invalid ZIP file" error.
Click to expand...
Click to collapse
Try to go back to the 32bits version and erase everything and format the data and return to the 64bit version because here I had this problem it was because of the TWRP that I was using, it was the 32bits version, after that I upgraded to the 64bits version I did not have this problem. Remembering that in the site https://dl.twrp.me/karate/ has two versions of TWRP, the version twrp-3.1.1-0-karate.img is 32bits and the version twrp-3.1.1-1-karate. img is 64bit.
J.D.M said:
Try to go back to the 32bits version and erase everything and format the data and return to the 64bit version because here I had this problem it was because of the TWRP that I was using, it was the 32bits version, after that I upgraded to the 64bits version I did not have this problem.
Click to expand...
Click to collapse
Well, that kinda worked(?), now I have another error it says that my firmware is incompatible with the ROM version, and I need to update it (I dont know how to do this), and give me ERROR: 7 now
Crolys said:
Well, that kinda worked(?), now I have another error it says that my firmware is incompatible with the ROM version, and I need to update it (I dont know how to do this), and give me ERROR: 7 now
Click to expand...
Click to collapse
MAN, the ERROR: 7 now could be solved by deleting the lines with ASSERT in "\META-INF\com\google\android\updater-script".
So, thanks for helping me, the problem with 64/32bits worked. I'm really glad that this worked, had stuck for 3 days without OS, now i'm never messing with this stuff again haha.
Crolys said:
MAN, the ERROR: 7 now could be solved by deleting the lines with ASSERT in "\META-INF\com\google\android\updater-script".
So, thanks for helping me, the problem with 64/32bits worked. I'm really glad that this worked, had stuck for 3 days without OS, now i'm never messing with this stuff again haha.
Click to expand...
Click to collapse
I've been researching and was going to tell you to delete the above lines mentioned, I am glad you have succeeded.
got same 255 error,just now i reflashed stock rom and issue resolved
vasu009 said:
got same 255 error,just now i reflashed stock rom and issue resolved
Click to expand...
Click to collapse
how did you reflashed the stock rom, please reply cause im stuck with the twrp and unable to do it. my phone doesn't have an os now
what s the password of the trwp
J.D.M said:
I've been researching and was going to tell you to delete the above lines mentioned, I am glad you have succeeded.
Click to expand...
Click to collapse
Can install this ROM on any Lenovo K6 Power device ??
dushd95 said:
Can install this ROM on any Lenovo K6 Power device ??
Click to expand...
Click to collapse
Yeah
J.D.M said:
Yeah
Click to expand...
Click to collapse
It says device not supported why??
Dont forget to reboot again into twrp - after flashing 64bit twrp . This is a step that is very important if you will not reboot your phone into twrp after flashing 64 bit twrp then , it will keep showin you the error 255.
So check that .
wacccim said:
what s the password of the trwp
Click to expand...
Click to collapse
Go for 3.2.1.0 it is better then 3.1.1.1 in 64 bits it ain't ask password i use it to flash all roms
Tere 3.1.1-1 asking for password to encrypt data
I flashed my Lenovo k6 power with twrp 3.1.1-1 after I was not able to flash crdroid,lineage is,pixelized stock ROM to my phone. Now the twrp is asking for password to encrypt data and I am surprised because I hadn't set a password. I tried to unlock it with my phone password but I it is saying to enter correct password.
Please someone help me. I am not able to flash other things too please somebody help me.:
Erase the data
Shrestha Kumar said:
I flashed my Lenovo k6 power with twrp 3.1.1-1 after I was not able to flash crdroid,lineage is,pixelized stock ROM to my phone. Now the twrp is asking for password to encrypt data and I am surprised because I hadn't set a password. I tried to unlock it with my phone password but I it is saying to enter correct password.
Please someone help me. I am not able to flash other things too please somebody help me.:
Click to expand...
Click to collapse
Use erase the data from wipe option then you will be able to install rom and g-apps.
Every time you will need password, I don't know why but after erasing data you install all files otherwise you need to erase data again and again
Crolys said:
Hi, I already had my phone rooted and with TWRP installed, but I needed to restore my phone. First I did this trough the system, but I noted that a lot of old files still were there, and I went to TWRP and did a wipe, but selected /system and /cache, now I don't have a OS on my phone.
The phone doesn't turn off, everytime I try to power off, he turn on again, and stay on Lenovo logo. The only thing I can acess is Fastboot mode (via Power down + power), I cant acess TWRP trough the phone, but I found a .bat file, that when I'm in fastboot mode, it flashes twrp on my phone and I can acess it . The other problem is that I always get an error when trying to flash any rom. Things like Error:255 or ".zip file not valid". Tried 2 roms and nothing.
Can someone please help me? I would prefer a stock rom for Brazil, but now I just want any rom, dont even mind if it's not stock.
Click to expand...
Click to collapse
I Faced same problem. It's ok that your phone is in weird state for time now. And also possible to recover.
Hopefully you have adb-tool, custom-rom & gapp, twrp.img on your PC.
1) Boot your mobile in fastmode using Power ON with Volume down key for 5 sec (Lenovo log with left hand side sayinh fastboot mode)
2) Connect the mobile to PC using USB & Go to adb tool folder. Open command prompt in this folder & Execute the follow step by step execution
fastboot oem reboot-recovery
3)Wait for mobile to boot in to recovery mode with TWRP
Now need to flash custom-rom followed by gapps installion.
I) You can use pendrive with otg to flash custom-rom followed by gapps
OR
II)You can use phone storage/SD card to flash the custom-rom followed by gapps
OR
III)adb sideload command as fallow
a)In TWRP recovery on mobile, goto Adavanced->ADB Sideload & Swipe to start the sideload
Now on PC execute . Specify custom rom path inside ""
adb sideload "C:\adb\images\MyCustomROM.zip"
Have a patience to complete the operation.
Click back for Adavanced Menu again.
b) Select ADB Sideload & Swipe to start the sideload
Now on PC execute . Specify Gapp path inside ""
adb sideload "C:\adb\images\open_gapps-arm-7.1-pico-20180611.zip"
c)Have a patience to complete the operation.
Once complete go to TWRP Screen.
d)Now go back TWRP main menu & select wipe->format Data.
Go to Reboot->system.
How to install TWRP if no OS there
1) Boot your mobile in fastmode using Power ON with Volume down key for 5 sec (Lenovo log with left hand side sayinh fastboot mode)
2) Connect the mobile to PC using USB & Go to adb tool folder. Open command prompt in this folder & Execute the follow step by step execution
a) To check the device is connected to PC or not
fastboot oem device-info
b) To flash the recovery. Give twrp path inside the ""
fastboot flash recovery "C:\adb\images\twrp.img"
c) To boot into recovery mode
fastboot oem reboot-recovery
---------- Post added at 10:03 PM ---------- Previous post was at 09:57 PM ----------
[/COLOR]
Shrestha Kumar said:
I flashed my Lenovo k6 power with twrp 3.1.1-1 after I was not able to flash crdroid,lineage is,pixelized stock ROM to my phone. Now the twrp is asking for password to encrypt data and I am surprised because I hadn't set a password. I tried to unlock it with my phone password but I it is saying to enter correct password.
Please someone help me. I am not able to flash other things too please somebody help me.:
Click to expand...
Click to collapse
In my case, It worked with PIN.

Nokia 6.1 plus Stuck on TWRP Splash screen. PLEASE HELP!!

Hello everyone,
I have recently unlocked the bootloader on my Nokia 6.1 plus, and rooted it. I then went ahead and installed TWRP ( App install method - found in the twrp website ). However after I rebooted my phone has been stuck on the TWRP splash screen , I Tried going to download mode , and that just got me back to the twrp splash screen. I turned off the phone and powered it on again , same result . Whatever I do it just keeps going back to the TWRP splash screen .. What is even worse is that my device can not be recognized by my pc while stuck on the splash screen , thus I can not use ADB or Fastboot ...
I am feeling really hopeless and stuck , Help would be much appreciated!! Thanks
Now, dissemble the device and enter edl mode
Sent from my Nokia 6.1 using Tapatalk
MaxTurner771 said:
Hello everyone,
I have recently unlocked the bootloader on my Nokia 6.1 plus, and rooted it. I then went ahead and installed TWRP ( App install method - found in the twrp website ). However after I rebooted my phone has been stuck on the TWRP splash screen , I Tried going to download mode , and that just got me back to the twrp splash screen. I turned off the phone and powered it on again , same result . Whatever I do it just keeps going back to the TWRP splash screen .. What is even worse is that my device can not be recognized by my pc while stuck on the splash screen , thus I can not use ADB or Fastboot ...
I am feeling really hopeless and stuck , Help would be much appreciated!! Thanks
Click to expand...
Click to collapse
You shouldn't have installed TWRP on a A/B device let alone install it via the app. It's okay, We're here to help.
If you have OSTLA in your PC, Just open it up and load all files and select to flash the stock ROM. Select Normal Download/Erase User Data options and if the option to Chech AP status is enabled, Disable it. Select on start or the option to flash stock ROM.
Power off your phone completely. If you can't, Then press the volume+ button and power button. Once the screen goes off, Immediately connect phone to PC.
Phone should now reboot into download mode and stock rom should start flashing. Then it's just a matter of waiting for it to flash and reboot.
CarbonGTR said:
You shouldn't have installed TWRP on a A/B device let alone install it via the app. It's okay, We're here to help.
If you have OSTLA in your PC, Just open it up and load all files and select to flash the stock ROM. Select Normal Download/Erase User Data options and if the option to Chech AP status is enabled, Disable it. Select on start or the option to flash stock ROM.
Power off your phone completely. If you can't, Then press the volume+ button and power button. Once the screen goes off, Immediately connect phone to PC.
Phone should now reboot into download mode and stock rom should start flashing. Then it's just a matter of waiting for it to flash and reboot.
Click to expand...
Click to collapse
I had a problem in that my device would never be recognized by my pc even when i finally manage to put in download mode, However after many days trying I was finally able to do it , and to use OSTL.... so thank you!!
I am wondering now how I will do the thing i wanted from the start which is to flash a kernel if i shouldn't use twrp?
MaxTurner771 said:
I had a problem in that my device would never be recognized by my pc even when i finally manage to put in download mode, However after many days trying I was finally able to do it , and to use OSTL.... so thank you!!
I am wondering now how I will do the thing i wanted from the start which is to flash a kernel if i shouldn't use twrp?
Click to expand...
Click to collapse
So to my understanding what you want to achieve is flash a custom kernel on stock rom. And after you messed up your stock recovery by installing twrp, if you have flashed stock rom using ostla then follow these steps.
First without tampering anything finish an ongoing/pending ota/sp update cause after you install custom kernel you phone won't be able to install OTAs. The last sp is of june so install that.
Now coming to installing the kernel-
*Place your twrp and kernel zip file into your adb folder*
1. Setup usb debugging and connect your device normally to your pc, check if the device is communicating with pc type in "adb devices" and allow on your phone for authorisation.
It should reply with your serial on cmd window.
2. Type in "adb reboot bootloader" that should put your device in download mode.
3. Type in "fastboot boot twrp.img" (replace twrp.img with whatever your twrp image file name is)
4. Go to advanced and select adb sideload, swipe to start.
5. Now move to your cmd window and type in "adb sideload kernel.zip" (replace kernel.zip with whatever your kernel zip file name is)
Wait for the process to finish
Now press home go to wipe>advanced wipe select dalvik cache and swipe to wipe
again press home and select reboot, select system
Now final important step
6. don't swipe, select "do not install twrp"
D-Mi said:
So to my understanding what you want to achieve is flash a custom kernel on stock rom. And after you messed up your stock recovery by installing twrp, if you have flashed stock rom using ostla then follow these steps.
First without tampering anything finish an ongoing/pending ota/sp update cause after you install custom kernel you phone won't be able to install OTAs. The last sp is of june so install that.
Now coming to installing the kernel-
*Place your twrp and kernel zip file into your adb folder*
1. Setup usb debugging and connect your device normally to your pc, check if the device is communicating with pc type in "adb devices" and allow on your phone for authorisation.
It should reply with your serial on cmd window.
2. Type in "adb reboot bootloader" that should put your device in download mode.
3. Type in "fastboot boot twrp.img" (replace twrp.img with whatever your twrp image file name is)
4. Go to advanced and select adb sideload, swipe to start.
5. Now move to your cmd window and type in "adb sideload kernel.zip" (replace kernel.zip with whatever your kernel zip file name is)
Wait for the process to finish
Now press home go to wipe>advanced wipe select dalvik cache and swipe to wipe
again press home and select reboot, select system
Now final important step
6. don't swipe, select "do not install twrp"
Click to expand...
Click to collapse
This might sound like a stupid question but I am a major newbie when it comes to this,
Right now i managed to compile a custom kernel and I have a boot image along with the kernel, so to get the kernel.zip do I just zip up all these files? also I read that I could simply flash the image by rebooting to my bootloader and then using " fastboot flash boot boot.img " would this work , and if so does this mean i don't need twrp...
Thanks again for the help , it is much appreciated
MaxTurner771 said:
This might sound like a stupid question but I am a major newbie when it comes to this,
Right now i managed to compile a custom kernel and I have a boot image along with the kernel, so to get the kernel.zip do I just zip up all these files? also I read that I could simply flash the image by rebooting to my bootloader and then using " fastboot flash boot boot.img " would this work , and if so does this mean i don't need twrp...
Thanks again for the help , it is much appreciated
Click to expand...
Click to collapse
If you just want to flash your custom kernel there's no need to flash a boot.img if you've a running rom installed. You can flash the kernel.zip it via twrp or adb sideload via twrp.
Sorry for the late reply, if you have a bootloader-unlocked 6.1 Plus you should join Nokia 6.1 Plus community on telegram you'll get much faster response from the community regarding your device ?

Categories

Resources