Database Users

flashing Stock I570EXXJH1

I have tried many 2.2's on the spica and i want to flash it to this version of the original firmware - I570EXXJH1
I have downloaded this from samfirmwares and after opening it i t contained 2 files, a eSER.tar file and a SS_DL.dll.
Also it said that the New .ops file is required is required,but the link does not work.
I also have odin 4.03 with some ops file in it,don't know wether it's old or new.
1.can anyone post the link to the New .ops file.
2.So what all should i select in odin ?

Guys, any one ? i Badly need the new ops file and the procedure as the phone is very unstable...

I would use the Samdroid forum, they should be able to help.
I have a Spica and it verty stable (and fast) using CM 8.3.2 and Yonip V12 kernel.

boxy44 said:
1.can anyone post the link to the New .ops file.
2.So what all should i select in odin ?
Click to expand...
Click to collapse
1. You need spica_jc3.ops- here is the correct one (if it downloads as .ops.txt just remove .txt)
2.Firmware file should be named i5700XXJH1.tar or in a similar manner.
SS_DL.dll must remain in the same directory where .tar firmware is located
a) put the phone to download mode and connect USB cable
b)start Odin and see if the phone is found- in top left field you should se COM port number. If there isn't- check in Device Manager if drivers are correctly installed
c) load spica_jc3.ops as OPS file and firmware as One Package file
d) select OnePackage option, leave other options as they are- Reset Timer, Protect Ops and Reset Timer (300) should be selected by default
e) click Start button, don't touch the phone and PC, sti back and wait
f) when flashing is done phone will reboot, you can safely unplug USB and close Odin

[Q] Build.prop :D

What is the best build.prop configuration for our defy???
I use White Rabbit.
Thanks

I'm not using a defy so I will help u with The best way I can
1. unzip ur rom from the computer
2. open the rom's folder
3. open system
4. their will be a file called build (this is it)
5. copy it to ur sdcard
6. install es file manager
7. go to the es file manager's settings
8. enable all the root settings
9. copy the buld.prop which u took from the computer
10. go to system directory itself
11. open system folder
12. past it and replace there
13. I hope I helped.
next time take a copy of the buld.prop before playing with it.
email me for any more help (btw I'm still a beginner in developing things)

Return to Stock Rom D803 from Kit Kat Rom

Hoping I could get this finally resolved with a little bit of help. I'm running a Kit Kat Rom (Mahdi Rom) and trying to revert back to Stock 4.2.2.
I've tried countless scenarios and i keep getting 2 problems. The First is:
When im in R&D Test Tool and run Normal Upgrade test and "Upgrade Start". I cannot select a language to select it's blank.
After i proceed i get the following problem " i get stuck on 49% and it starts all over again" it wont pass that state
I've tried both of these methods and ran all files as Admin
How to flash ROM:
The Files are Hosted on my server for fast speeds!
1). Download all The Files Below!
1.2). Firmware Files are HERE!
1.3). Download R&D FlashTool & Other Files :Here
1.4).Download Drivers HERE!
Quote:
2. unzip
- LGMOBILEAX
- LG_KDZ_FW-Update_OfflineFix
3. install B2CAppSetup.exe in
LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
Method 1. work with vbs script
1. run Automatic Offline Procedure.vbs in \LG_KDZ_FW-Update_OfflineFix folder
2. now R&D test tools appear please select KDZ File
3. select Normal web upgrade test
4. Select Upgrade start
5. In Select Country & Langauage Please Select Country to Different Country (do not worry if does not has Langauage to select )
6. Process Flashing firmware start...Please waiting just moment.
7. for process 100% you is finishing flash return to stock firmware
Method 2. edit host file
thank @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would
Any Help would be greatly appreciated

itworks78 said:
Hoping I could get this finally resolved with a little bit of help. I'm running a Kit Kat Rom (Mahdi Rom) and trying to revert back to Stock 4.2.2.
I've tried countless scenarios and i keep getting 2 problems. The First is:
When im in R&D Test Tool and run Normal Upgrade test and "Upgrade Start". I cannot select a language to select it's blank.
After i proceed i get the following problem " i get stuck on 49% and it starts all over again" it wont pass that state
I've tried both of these methods and ran all files as Admin
How to flash ROM:
The Files are Hosted on my server for fast speeds!
1). Download all The Files Below!
1.2). Firmware Files are HERE!
1.3). Download R&D FlashTool & Other Files :Here
1.4).Download Drivers HERE!
Quote:
2. unzip
- LGMOBILEAX
- LG_KDZ_FW-Update_OfflineFix
3. install B2CAppSetup.exe in
LG_KDZ_FW-Update_OfflineFix\KDZ_FW_UPD_EN
4. go to C:\ProgramData\LGMOBILEAX
remove all files and folder
5. copy all files and folders from LGMOBILEAX that you unzip from step2 to C:\ProgramData\LGMOBILEAX
Method 1. work with vbs script
1. run Automatic Offline Procedure.vbs in \LG_KDZ_FW-Update_OfflineFix folder
2. now R&D test tools appear please select KDZ File
3. select Normal web upgrade test
4. Select Upgrade start
5. In Select Country & Langauage Please Select Country to Different Country (do not worry if does not has Langauage to select )
6. Process Flashing firmware start...Please waiting just moment.
7. for process 100% you is finishing flash return to stock firmware
Method 2. edit host file
thank @Hid3rs
1. Go to windows/system32/drivers/etc/ and open your hosts file! (open it with wordpad)
2 . Add this line at the end of the document:
127.0.0.1 csmg.lgmobile.com
3. Save hosts file
4. Install msxml (you can find it in the downloaded KDZ_FW_UPD_EN folder)
5. Start http in the shttps folder
6. Start Windows Enabler and turn it on (system tray!)
7. Start UpTestEX_mod2_marwin
8. Flash your .kdz as you normally would
Any Help would be greatly appreciated
Click to expand...
Click to collapse
This is a Development section not a Q&A section. There's another section for this.

[Tutorial] - How to install any firmware using Windows Device Recovery Tool

It worked for me, it might work for you. Do it at your own risk.
Windows Device Recovery Tool (WDRT) will download and install only the latest version of the software available for your device.
This tutorial will show you how to use WDRT to install ANY firmware version you want on your windows phone device.
That is, you can upgrade or downgrade. For example, go from wp 10 to wp 8.0, or from wp 8.1 to wp 8.0, or whatever you want.
Here is how to use Windows Device Recovery Tool to install any firmware released for your model:
I try to ilustrate the process in this video: https://www.youtube.com/watch?v=gnLQ_u4kF7E
STEPS:
0) Download the firmware you want to install (only the .ffu file)
1) Let WDRT downloads the last firmware version for your model (that's what it does). When the download is completed, close the program before the installation starts. You don't have to have the last firmware version installed on your phone, but you have to have it on the WDRT folder.
2) Go to the location where WDRT stores the files: c:/programdata/microsoft/packages/products/
3) Duplicate the folder "RM-xxx" (your model) containing the files WDRT downloaded. You'll have two folders with the same content, like "RM-xxx" and "ARM-xxx", for example.
4) Go back to the place where the .ffu file you want to install is and copy it.
5) Enter the "ARM-xxx" folder and paste the .ffu file.
5) Now you have two .ffu files in "ARM-xxx" folder. Copy the name of the original .ffu file that was already there before you paste the other .ffu file and delete it (the original one).
6) Rename the .ffu file you've just pasted with the name you just copied.
5) Open WDRT, select your phone, and click install/reinstall. After the program checks the compatibility of the files, the message "switching the phone to flashing mode" will apear, as soon as it happens, go back to the "Products" folder and rename the folder "RM-xxx" to something else, like "RM-xxxA, and rename the folder "ARM-xxx" to "RM-xxx". This has to be done quickly, before the installation starts.
6) If everything is OK, the installation will start and you'll have your firmware installed.
With this method i finally got my lumia 620 working again, after the touch screen stopped working due to an accidentally upgrade. I couldn't use any other method because both my lumia volume buttons are broken, so the flashing process needed to be automatic.

If you have rm-1073 att lumia 640 it will not work because of the cid checks within the flashing. Otherwise any other one should work fine

cannot pass the checks

Crosscall Trekker M1 : No Update File on TFCard (Firmware's installation issues)

Hello everyone ! I hope you're all doing all right
I make a third post about my issues (and probably yours for those who have the same phone) on reinstalling the original firmware of my Crosscall Trekker M1.
My situation had evolved since the time I started making researchs on that phone.
For now I have the original Firmware and the method to install it.​
There are the links of my 2 previous topics on that subject if you want to learn more :
HTML:
https://forum.xda-developers.com/general/help/apply-update-sdcard-failed-rooted-t3676453
HTML:
https://forum.xda-developers.com/general/help/crosscall-trekker-m1-how-to-reinstall-t3691514
(For thoses who want to have it, here's the link of the firmware)
HTML:
https://www.dropbox.com/s/zpz2p0b75rlw1pl/LU652R%28HS-L635%29_L1185.6.02.00.EU00_MultiDownload_201601292005_user.tar.gz?dl=0
So it appears that I can reinstall the stock rom as an uptade with a sdcard by going on the Emergency Mode
(When the phone is power down : press volume buttons + & - and power button to go on the emergency mode)
The firmware at first is compress on a .tar.gz format.
When I extract the archive with 7zip, I got a i635.v1 file
I'm suppose to put it on the root of the sdcard to perform the installation.
So I formatted my sdcard and put the file on the root.
I put the sd card on the phone
Unfortunately for me when I start the phone on Emergency mode I have an error message:
No update file on TFcard
There are somes pictures that I took during that operation so you can see step by step :​
My 32gb sd card just formatted
The contain of the ROM
Here you can see the extension of the i635.v1
Here you can see the ROM archive before I extracted it
This is when I launch the device on Recovery mode (by pressing Vol - and Power buttons)
This is what the Recovery mode looks like
The Rom appear on the Recovery mode
This is what appear when I launch the device on Emergency mode
And this is the error that I have
On an other tutorial who explain how to install the ROM with an sdcard,
I saw that the extension of the unzipped archive should be i635.v1.bin​
Link of the tutorial mentionned
HTML:
http://forum.gsmdevelopers.com/showthread.php?t=8728
I started to think that my problem for now is the format of the ROM.
Maybe I need to convert it on .bin
Am I wrong ? Does someone got any more clues ?
I'll stay alert on the post and during the time I'll have an answer I wich you a nice day ! :good: