Related
Hi there,
I've just upgraded my HTC Tattoo to the SP-FroYo v2.2.1 AOSP ROM, I had hoped some WiFi problems had been solved. At my work we have a WPA2-PSK encrypted network which also sends out a WPA-PSK encrypted network. Only my HTC Tattoo shows it as a WEP encrypted network, but I can't connect. I use a WPA2-PSK encrypted network at home and it works fine.
Is there a update available to fix some WiFi signals?
Thanks!
Did you had a costum ROM before that one?
Sometimes, if something doesn't work, i allways flash oficial ROM first, then root and finally flash the costum ROM.
Cheers
I had the original ROM before this, and in that ROM it didn't work either!
Have you tried to go to :
Settings > Wireless Controls > Wi-Fi Settings and press the Menu button, select Advance > Regulatory domain
And tell the phone to use (all) 14 channels.
Cheers
It still isn't working, it recognising it but I can't connect
Hi all,
i've a big problem here, i can't connect to my home router.
router got wep encryption 64 bit, hd2 with stock rom wm 6.5 ( 5.2.21869 ), rom versio 1.66.408.1 ( 76641 ) ITA, radio version 2.15.50.14, protocol version 15.42.50.11u, hspl 2.08.
i think is an os or radio or hspl error, because when i boot into android i can connect to the router, but not in wm 6.5.
can someone help me resolving this problem?
thx in advance at all who would help me.
Alessio
Hi
Do you use MAC address filter in your router?
Probably the WiMo 6.5 and the ANDROID Wifi MAC-Addresses are different and only the ANDROID MAC-address is entered to the router's MAC filter and is allowed to get internet access by the MAC-Filter.
br
Rainer
No man, i don't use any mac filter.
i think that was something inerent to android, cause this problem come showing when i had installed it. before i had no problem.
UP. none got any idea?
Well, good news.... now my 3g connection aren't working on android...
( wm6.5 wifi ko 3g ok --- android wifi ok 3g ko ) none could help me?
Did you put in the right APN settings in android?
And are you sure your the setting on your wifi channel is right. Meaning is it on the right channel? E.g. 8, 20, 11
If you're not sure, factory resetting the router might restore it to the compatible channel.
the apn is right... is the same as wm 6.5 ( i get it from my provider assistence ).
the router is on channel 6. i think that couldn't be an error in router configuration and also an apn error cause wifi in android works and 3g in wm 6.5 also.
wm 6.5 cna't connect to any router ( i've tried in 8 different router) maybe an hspl error?
UP. none could help me?
im having this same problem
Mmm, you can try reinstalling the radio. Might fix wifi. If that doesn't work, I still recommend hard resetting the router.
But are you sure your apn settings are right? If it works in winmo, then more than likely it's the apn settings in android that is wrong. But I'm not sure. You can try search up your carrier's apn settings, and try those.
hello all
I have a problem with the new kernel Tytung 11
Wi-Fi does not work
Tytung says it's changed address Wi-Fi
and update the white list of the wireless router
how do you '??
thank you very much
Which version of android you have ?
Android ginger 2.3.5
Roma MIUI 1.8.19
http://forum.xda-developers.com/showpost.php?p=10429937&postcount=3
maybe it's the change my address?
Hmm, dont now.. I flash new kernel, same 2.3.5 droid, and have connection to wi fi without any glitch..
Maybe you should try a soft reset?
You need to get the new mac address of your phone first. Go to Settings->Wireless & Networks->Wi-Fi Settings->[Menu] Advanced -> MAC Address.
Next you need to go into your wifi router's settings and add the mac address to the list of addresses allowed to connect to the router. This is different for every router unfortunately, so I cannot help you with that.
You can modify to full permissions of wpa_supplicant in /system/bin use root explorer.
but after reboot you must do it again.
Hi!
I have problem with cellular connection.
I've tried few roms:
http://forum.xda-developers.com/showthread.php?t=1356833
http://forum.xda-developers.com/showthread.php?t=953078
I can't connect to gsm network.
Connection Setup says that my carrier doesn't exist in database (Play, Poland).
I did input my apn settings manually, but it didn't work eather.
On Android and WM6.5 everything is working fine. Few months ago I've had BackToTheFuture 7720 rom - without problems as well.
I'm running out of options...
Check if there is an update to Connection Setup, otherwise you could try flashing an original WM 6.5 Rom and see if the problem persists.
I've installed WM6.5 - everything is working fine.
Connection Setup from marketplace - same story as before.
Any ideas?
gregory90 said:
I've installed WM6.5 - everything is working fine.
Connection Setup from marketplace - same story as before.
Any ideas?
Click to expand...
Click to collapse
There is a new connections database cab for connection setup at yuki/xbmod tweaks thread, but Play is not in the database. Must be a niche carrier. Find out if Play is a reseller of a larger carrier.
Actually there is Play in that database. It seems like Connection Setup can't detect proper network (I'm using Turbosim to remove simlock - could this be causing problem?).
Is there a way to tell Connection Setup what settings should it use? Or set this manually?
As in beta, you still can't connect to Wi-Fi in official Oxygen OS 10. Network reset did not help
OP 6T has no IP address.
Anyone have any ideas?
..
I had a Bet 10 v.17 phone also had no Wi-Fi connection.
After returning to Android 9, IP appeared again and there were no connection problems.
This is not an issue with Oxygen OS 10. It is a feature of Android 10 called mac randomize. Your mac will be changed randomly when you connect to wifi network. This is for security purpose. If you enabled mac filter in your router then while connecting to your wifi network in your mobile go to advanced options choose Use device mac under the privacy option.
Note: after you upgrade to Android 10 you device mac will be changed. Don't forget to updated your new mac in you router mac filter settings.
Azar_k said:
This is not an issue with Oxygen OS 10. It is a feature of Android 10 called mac randomize. Your mac will be changed randomly when you connect to wifi network. This is for security purpose. If you enabled mac filter in your router then while connecting to your wifi network in your mobile go to advanced options choose Use device mac under the privacy option.
Note: after you upgrade to Android 10 you device mac will be changed. Don't forget to updated your new mac in you router mac filter settings.
Click to expand...
Click to collapse
I have turned off all filters on the router.
I changed to MAC of device, to randomized MAC. Nothing new.
Still can't connect to Wi-Fi.
This is insane! New system and connection problems?
Instead of getting better, it's getting worse.
Bluetooth issues on my phone
I can't even enable wifi connection
Reflash the official update zip....worked for me
I have exactly the same issue.
After upgrading to Oxygen OS 10.0 on my OnePlus 6, connecting to my router with a password became impossible.
The only option is to connect via a guest connection, without a password (hardly a viable option).
All other devices connect properly.
Setting the MAC address to "device MAC" rather than "random MAC" does not solve the problem.
Resetting the phone's wireless settings does not solve the problem.
Factory resetting the smartphone (the only solution suggested by OnePlus support) has not solved the problem.
Resetting the router (Netgear Nighthawk RAX40) has not solved the problem.
SOLUTION !!!
justforkix said:
I have exactly the same issue.
After upgrading to Oxygen OS 10.0 on my OnePlus 6, connecting to my router with a password became impossible.
The only option is to connect via a guest connection, without a password (hardly a viable option).
All other devices connect properly.
Setting the MAC address to "device MAC" rather than "random MAC" does not solve the problem.
Resetting the phone's wireless settings does not solve the problem.
Factory resetting the smartphone (the only solution suggested by OnePlus support) has not solved the problem.
Resetting the router (Netgear Nighthawk RAX40) has not solved the problem.
Click to expand...
Click to collapse
I FOUND A SOLUTION !!!
The router had previous security: WPA2 (very secure).
Android 9 in OP 6T worked with them, but not Android 10.
I have reduced security to: WPA / WPA2 (secure).
Currently, Android 10 connects to a Wi-Fi network without a problem.
You should write the patch in Android 10.
Does this mean that everyone under Oxygen OS 10 should downgrade their Wi-Fi security in order to connect with it?
Is your OnePlus font italic?
Have you used Magisk Canary?
justforkix said:
Does this mean that everyone under Oxygen OS 10 should downgrade their Wi-Fi security in order to connect with it?
Click to expand...
Click to collapse
Haven't yet tried, but it seems to be a solution.. I couldn't understand, WHY it works with all other WiFis and doesn't work with my, but WPA2 looks like answer.
Has somebody reported this bug to OP?
drozel said:
Haven't yet tried, but it seems to be a solution.. I couldn't understand, WHY it works with all other WiFis and doesn't work with my, but WPA2 looks like answer.
Has somebody reported this bug to OP?
Click to expand...
Click to collapse
Until yesterday, were I messed up with root/magisk, everything (including WPA2) was working well for me.
Now I can'T turn on WIFI anymore.
WPA/WPA2 helped for me... OP can't connect to only-WPA2 networks after Android 10 update.
Installed via OxygenUpdater, no root, no unlocked bootloader, full stock
Alex_H_H said:
I FOUND A SOLUTION !!!
The router had previous security: WPA2 (very secure).
Android 9 in OP 6T worked with them, but not Android 10.
I have reduced security to: WPA / WPA2 (secure).
Click to expand...
Click to collapse
many, many thanks!
I can still connect to my existing network, I just had to update my MAC filters.
I really advise against using WPA at all - see if there is firmware update for your router.
Are you using Magisk Canary?
Roll back to Stable and reinstall oos
firegate22 said:
Until yesterday, were I messed up with root/magisk, everything (including WPA2) was working well for me.
Now I can'T turn on WIFI anymore.
Click to expand...
Click to collapse
I had the same issue, flashing a custom kernal (Omega) fixed the problem. Why ? Idk
change private DNS to automatic
changing my DNS from cloudflare to automatic helped me (after also switching to device MAC)
dbarrett480 said:
Reflash the official update zip....worked for me
Click to expand...
Click to collapse
Did you flash the full zip or incremental? From TWRP? Is any wipe necessary after flashing?