Database Users

[Q] wifi problem - 802.1x EAP network

Hi,
I'm running CM7 (2.3.4) v.138 HACKDROID on an X8.
I'm unable to connect to a 802.1x EAP network, despite the fact I can successfully connect to WEP protected networks.
I was able to the 802.1x EAP network fine when running Froyo... but since I installed CM7 v138, I lost access.
I can get just fine to the point where I enter my credentials, but after that it is like my credentials aren't valid and my phone tries to conect to another network.
Any thoughts on what I can do?
Thank you very much

atlasbr said:
Hi,
I'm running CM7 (2.3.4) v.138 HACKDROID on an X8.
I'm unable to connect to a 802.1x EAP network, despite the fact I can successfully connect to WEP protected networks.
I was able to the 802.1x EAP network fine when running Froyo... but since I installed CM7 v138, I lost access.
I can get just fine to the point where I enter my credentials, but after that it is like my credentials aren't valid and my phone tries to conect to another network.
Any thoughts on what I can do?
Thank you very much
Click to expand...
Click to collapse
did you change tiwlan file for faster wifi for x8? with 802.11N ? cause I have similar problem and I think I solved

No, I haven't done anything like this... was just hoping it would work out of the box.
Can you please point me to the referred file?
Very much appreciated.

http://www.fileserve.com/file/7jqvBPU here is the link for original "tiwlan.ini" file.
move it on your sd card, then with root explorer copy it and paste it in system/etc/wifi (if there is no such folder "wifi" paste in it system/etc) then go to settings and from there delete all remembered wifi network,then reboot phone and it should help. if not change rom and then try the same.hope helped
p.s you should turn on RW or root explorer and anyway save your own tiwlan.ini file which you'll find in system/etc or system/etc/wifi.(move that on sd card and rename tiwlan1.ini or smth)

Thanks a ton! Will do this right now and will be able to report back on Mon.

atlasbr said:
Thanks a ton! Will do this right now and will be able to report back on Mon.
Click to expand...
Click to collapse
Can you connect now?? how??

From my experience i can say that 802.1x EAP (eduroam connection with cert.)for me is working only on gingerxperia v7. On diferent version(DX 12-18, GX 8-12) i cant connect. I try change files from v7 (system/etc/wifi) to another roms but it was not working (files from v7 are little diferent than in other roms). So i must say that only option for me to have eduroam connection is rom gingerxperia v7 which isnt the best nowadays...

Does anyone have a solution for this??
I have the same issue on my X10 Mini running MiniCm7 2.1.4 (Android 2.3)
Is there a way to copy files needed for wifi from a previous ROM? Android 2.1 was working OK on wifi 801.2 enterprise. So I would like to copy files from an Android 2.1 Rom (e.g. Stock rom) to my current ROM. Is this possible? Which files do I need to copy?
I tried already
system/bin/wpa_supplicant
system/bin/tiwlan_cu
system/bin/tiwlan_loader
But then I get "Wifi error" after enabling Wifi ...

WiFi N Support on any ROM ?!

Okay, so I saw that WildPuzzle had WiFi N support and it worked great!
But now I'm wondering, is there a way to get the WiFi N support to any other ROM.
Your help is appreciated!

wifi n depends on kernel, not rom, so, look for kernels with wifi n support and flash it to any rom, bam, you have wifi n

I have wifi n at home and I fixed it by using a static ip.

So, about the kernel
You got any links for any kernel with n support for wildfire
and about the static IP adress thing, how to do it?

first on your computer bring up the command prompt.
then type in ipconfig /all
Keep that open and go to wi-fi settings on your phone
Click menu and advanced
And there you'll see the static IP options
Copy all but the IP one from your computer
For the ip change the last number a bit (Lets say your computer is using 192.168.0.5, type in 192.168.0.6 for example, because they mustn't overlap.)

here you can fine latest kernel and radio

100% working wpa_supplicant for galaxy s2 ad hoc mod for gingerbread 2.3.3 and 2.3.4

hello friends
today i m showing you a 100 percent working wpa_supplicant for galaxy s2 gingerbread rom for ad hoc network. yes it is test by me and also this is modified by me too. no one is responcible and cant take credit for developing it. currently i m using and testing on litening rom 6.1 and it works flawlessly. so no more wait for new wpa supplicant. becoz wait is over now. use it and reply me about ny bugs. i will try to revamp it. bye
download attachment and use it
if u like my work then plz donate me on my paypal account
[email protected]
and plz reply thanks

This is great!!! Tested on my galaxy SGS1 and works perfectly!
Thanks!!!
Edit: i can connect only if i set my ad-hoc network unproteced. If i add wpa2 or even wep security the phone gets stuck on "Obtaining IP address...", but it could be my ubuntu notebook.

Awsome sauce!!! Been waiting for this. Downloading and testing it now on my SG1.
Thanks
edit: just realised it is not a CWM flashable zip. Where do I put this?
edit2: figured out where to put it so dont worry. Cannot obtain IP address though on an unsecured ADHOC network.

what is this ?

It alows your phone to use your laptop/desktops internet connection. Create an ad-hoc wireless network on your laptop/desktop and then search for that network on your phone connect and voila your phone should now use the interent through your laptop/desktop.
I like it cos it means I can use my internet connection at work instead of 3g.

SGS2 on lite'ning v4.2 (2.3.4)
Open: 'obtaining IP' loop
WEP: 'obtaining IP' loop
WPA: [no connection]

it is not cwm file. first u have to unzip it then copy and paste this on system/bin folder on ur rooted gs1 and gs2.but this will work perfectly on gingerbread 2.3.4

hi haymzee
you should use litening rom ver 6.1 not 4.2 otherwise it will not work correctly.so first update ur rom in 6.1 and then use this wpa file ok

OH YES! will test and report; long awaited!

I can connect in the morning but after turn airplane mode on-off, then I can't connect till now.
It shows obtaining IP address, even I try to re-boot both phone. T_T

Hello everyone,
I finally managed to solve the problem of connections
thanks

hi to everybody,
thank you for your work!!!!!!! is perfect!!!!

hi,
i'm running LeoMar75 Revolution 2.6, and this wpa_ did not pass obtainig ip loop.
neither wit unprotected or wep protected adhoc network

guidox79 said:
Hello everyone,
I finally managed to solve the problem of connections
thanks
Click to expand...
Click to collapse
Hello, how did you manage to solve the looping 'Obtaining IP address.." problem ?

Also got the same problem of Obtaining IP address. I tried many configurations of changing the ip address manually with static ip address settings

Its working perfectly on our rom.
10 char will b built in in the next release
For all noobs:
Use root explorer
Unzip and put the file in system/bin
Reboot
Done.
Now test
Sent from my GT-I9100 using XDA App

I use LogMeIn.apk

any solution for GB 2.3.5 ???

I've tried ad hoc on 4 different laptops and it only worked on the newer ones

I can confirm this works 100%. I tethered the internet connection on my Macbook Air with the phone using AdHoc Wifi successfully.

wifi problem...tytung please advice me!!!!

Hi guys...am only geting wifi at home...not workin at my brothers house. it keeps conecting and disconnecting and authenticating..however when i boot the phone from windows the wifi works ok at his house!...i was using tytung v 2.8 gingerbread... i have made a fresh instal using tytung v 3.0 gingerbread but the problem is stil there.....using a htc hd2 running andrtoid from sd card.........please could somebody shed sum light!!!...

control wifi security type of router. wpa is better for android. you may have problems with wep security

...after the phone has scanned for wifi it brings up WPA/WPA2 PSK alongside the network name...after keying in the security password it just wont connect.......keeps connecting and disconnecting......seem to be having the same problem at me mates house aswell!!

shaz999 said:
...after the phone has scanned for wifi it brings up WPA/WPA2 PSK alongside the network name...after keying in the security password it just wont connect.......keeps connecting and disconnecting......seem to be having the same problem at me mates house aswell!!
Click to expand...
Click to collapse
Try a trila and error - disable security on the router completely for a few minutes and see if it stays connected. If it does stay connected without security, download the latest tytung kernel package from his thread, extract the wpa_supplicant from /system/bin and push it to the /system/bin in your android. See if that helps.

ok..thanks for your reply... i will try this out...if it does the trick you will have to advice me on the system bin thing!!!!!.........sorry i am new to android romming...might possibly drop you a email....

[Q] Change WiFi MAC Address

Hi.
I have tried several ways of changing my wifi hardware address but always with the same results: I can't connect to my AP if I've changed the MAC. I'm using Franco Kernel and stock 4.2.2 ROM (rooted).
Anybody got it?
Thank you.

Does your AP has MAC filtering enabled? Might want to go in and check if this is enabled on your router.
Or, you can use aircrack tool, airodump, to check which MAC addresses are already connected to your AP, and use on of these (I hope this is for your own AP....and you are not stealing wireless from your neighbor )