Mobile upgrade Q upgraded my 6045Y to 6.0.1 - Onetouch Idol 3 General

As written on title, today mobile Q 5.0.0 updated my phone to 6.0.1. So, did i have the official European firmware? I was just trying to going back to stock 5.0.2 after unlocking the bootloader via the panasonic eluga method....weird.

Probably yes. Is your LTE /4G working fine? If yes, it very probably the official European firmware

hello.
do you loose fastboot ?

murigny64 said:
hello.
do you loose fastboot ?
Click to expand...
Click to collapse
Ah ah, the first I thought about
Hoping we'll be able to keep fastboot or at least keep TWRP recovery

surprise, surprise, french unlocked 6039Y got the old 5.0.2 (mobile q)

I tried to update my 6045K with mobile Q 5.0.6 and my phone was updated to 6.0.1
I advised everyone in europe to try using the mobile Q to update
Enviado do meu 6045K através de Tapatalk

relvas18 said:
I tried to update my 6045K with mobile Q 5.0.6 and my phone was updated to 6.0.1
I advised everyone in europe to try using the mobile Q to update
Enviado do meu 6045K através de Tapatalk
Click to expand...
Click to collapse
it's faster? security patch? Which rom did you used before update?

relvas18 said:
I tried to update my 6045K with mobile Q 5.0.6 and my phone was updated to 6.0.1
I advised everyone in europe to try using the mobile Q to update
Enviado do meu 6045K através de Tapatalk
Click to expand...
Click to collapse
I would advise the opposite. If someone can get an OTA update.zip then a customized zip that does NOT wipe out recovery could be created. I am curious if they lose fastboot but am 90% certain they also will. It seems to be the direction Alcatel is going.
I honestly am getting better performance/service out of my $60 ZTE Zmax2 than my Idol3 nowadays with the exception of not having root.

murigny64 said:
hello.
do you loose fastboot ?
Click to expand...
Click to collapse
Yes, i lost fastboot, now i am looking for root...without success.

Alek Dev said:
it's faster? security patch? Which rom did you used before update?
Click to expand...
Click to collapse
Yes, is definitely fast, scored 37700 on antutu;
Security pach 1 july 2016;
Before i had stock 5.0.2 with beloved root

I can confirm mobile upgrade Q is now on 6.0.1 for 6045Y !

murigny64 said:
I can confirm mobile upgrade Q is now on 6.0.1 for 6045Y !
Click to expand...
Click to collapse
can you get the update.zip....Today france users get notification on device...
Sent from my 6045I using Tapatalk

Alek Dev said:
can you get the update.zip....Today france users get notification on device...
Sent from my 6045I using Tapatalk
Click to expand...
Click to collapse
On mobile upgrade Q, no OTA

murigny64 said:
On mobile upgrade Q, no OTA
Click to expand...
Click to collapse
It will come
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

witch backup ? 5.0.2 ?

murigny64 said:
witch backup ? 5.0.2 ?
Click to expand...
Click to collapse
@murigny64
Partitions from 5..0..2

i can do that but why ?

murigny64 said:
i can do that but why ?
Click to expand...
Click to collapse
i'm having same model 6045y Macedonian when i will flash the 6045y France partitions i can get the france update with mobile upgrade q (i do same with 6045k for old update) Please can you send me

ok, witch partitions do you want ?

murigny64 said:
ok, witch partitions do you want ?
Click to expand...
Click to collapse
Thanks i don't know which i will need to program recognize like french model .. can you send me the full backup of partitions without system and boot and recovery and .simlock....

Related

[OTA] [OFFICIAL] [Android 5.1 Lollipop]☜[XT1097]☞[LPE23.32-14] [RETMX]

Only for Mexican users of Blur_Version.22.21.17.victara_retmx.retmx.en.MX
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://mega.co.nz/#!7VR0GR4Z!e3p2rphRaVSzFreoAAPsCmk-UIu3PJ5qH2l7dN4oDjM
My English isn't that good, MP o spanish
:highfive:
Thanks for share this OTA.
it's possible to use with a Claro (Chile) MotoX2014?
Hello,
I have an XT1097 directly from Motorola, (not telcel), but it's converted to XT1095
Is it possible to install this OTA to bring it back to it's real estate? (I don't have any backup of the original firmware)
xSober said:
Thanks for share this OTA.
it's possible to use with a Claro (Chile) MotoX2014?
Click to expand...
Click to collapse
No, it will fail. You have to wait for the OTA. But I doubt claro will get it, claro and motorola had a fight, and now claro does not sell motorola phones... which means claro's motorola phones might not get updates ever.
Sent from my XT1095 using Tapatalk
---------- Post added at 11:38 AM ---------- Previous post was at 11:34 AM ----------
bunglemx said:
Hello,
I have an XT1097 directly from Motorola, (not telcel), but it's converted to XT1095
Is it possible to install this OTA to bring it back to it's real estate? (I don't have any backup of the original firmware)
Click to expand...
Click to collapse
No, flashing this OTA will not revert your phone back to stock 1097. You need to download the full firmware for 1097 and flash it to get back to stock.
Sent from my XT1095 using Tapatalk
I don't think this is the official release because the kernel is one month older than the other "official" OTA's. Looks more like the soak before the final release.
No, flashing this OTA will not revert your phone back to stock 1097. You need to download the full firmware for 1097 and flash it to get back to stock.
Click to expand...
Click to collapse
Do you know where can I get it?
And do I flash it just like the xt1095 one of your guide?
:good:
bunglemx said:
Do you know where can I get it?
And do I flash it just like the xt1095 one of your guide?
:good:
Click to expand...
Click to collapse
I don't know which 1097(countrt/carrier) you have, so that depends. This link has many firmwares for the moto x: http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25
Sent from my XT1095 using Tapatalk
AGISCI said:
I don't know which 1097(countrt/carrier) you have, so that depends. This link has many firmwares for the moto x: http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
México, and I bought it directly to Motorola, so no carrier.
Does it work for 22.21.25.victara_retla.retla.en.01?
Thanks!
bunglemx said:
México, and I bought it directly to Motorola, so no carrier.
Click to expand...
Click to collapse
Yes, the firmware for mexico is in that link. Here it is:
[http://www.filefactory.com/file/66bsfufslbt1/RETMX_XT1097_5.0_LXE22.46-17_cid12_CFC.xml.zip
The instructions should be similar to what is posted in other topics. But if you want to be on the safe side use RSDLite to flash it.
Sent from my XT1095 using Tapatalk
AGISCI said:
Yes, the firmware for mexico is in that link. Here it is:
[http://www.filefactory.com/file/66bsfufslbt1/RETMX_XT1097_5.0_LXE22.46-17_cid12_CFC.xml.zip
The instructions should be similar to what is posted in other topics. But if you want to be on the safe side use RSDLite to flash it.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Thanks, i'll download for a future flash :good:
I got the same update yesterday but It doesn't let me update it says there is an error when trying to update.
I tried from stock recovery and it says there is an error with gmail2.apk anyone know why is this happening?
A similar error happened to me yesterday, but with "Books.apk". I flashed again the stock rom with RDSLite and then I flashed the OTA (the zip file from the 1st post) and everything is working great now.
Can I use it? 4.4.4 telcel.
ccarrionc said:
Can I use it? 4.4.4 telcel.
Click to expand...
Click to collapse
No, you have to be on 5.0 retail mexico to use this ota file.
Sent from my XT1095 using Tapatalk
how i can chage the andorid 5.0 to 5.1?
Hi friends , i´m from mexico, i have a motox xt1097 with the carrier telcel, a few moths ago i can change the kit kat 4.4.4 to android 5.0 with the rds motorola and the system upgrade to 22.21.17.victara_retmx.retmx.en.MX amxmx, i want the 5.1 to my moto x, can you help me?
Thanks.
alexloyola said:
Hi friends , i´m from mexico, i have a motox xt1097 with the carrier telcel, a few moths ago i can change the kit kat 4.4.4 to android 5.0 with the rds motorola and the system upgrade to 22.21.17.victara_retmx.retmx.en.MX amxmx, i want the 5.1 to my moto x, can you help me?
Thanks.
Click to expand...
Click to collapse
If you're already on the stock 5.0 firmware (22.21.17.victara_retmx.retmx.en.MX), then you just need to flash the OTA via recovery.
If you don't know how to enter the recovery, just search for instructions, they're pretty easy to find, even videos.
Nek0x90 said:
A similar error happened to me yesterday, but with "Books.apk". I flashed again the stock rom with RDSLite and then I flashed the OTA (the zip file from the 1st post) and everything is working great now.
Click to expand...
Click to collapse
Can you link me to the post with that RDSLite or help me with some instructions to do it please?
work on amxmx telcel
zarocks said:
work on amxmx telcel
Click to expand...
Click to collapse
As I said, this is not the final/stable version. Look the date of the kernel, is 2 months old and the "official" versions out there are not more than one month old. Good it worked for you

YAY! Android 5.1.1 update is live!! build G925FXXU2BOFJ

Our Galaxy S6 Edge just got the Android 5.1 update! It's for G925F set.
Be *sure* before applying the 5.1 update using Odin as root isn't available yet for the Samsung's 5.1 update. You cannot rollback to previous bootloader either, it's protected now.
And, root isn't available yet! Will update the post as and when it becomes available but do let me know if you find that before me.
Here's the link to download the full firmware. Download Links:
| Direct Link | Mega
To know about support for shutter speed and RAW capture, see this.
It seems brightness bug is still present, per @strikerdj2011
No guest mode addition either, per @bernard134
Thanks: @Fauert for mega link
That was quick, you spend all night hitting the refresh button lol
Root is possible or not?
If yes, how we can do?
Thanks
screen brightness issue fixed ??
ilan78 said:
Root is possible or not?
If yes, how we can do?
Thanks
Click to expand...
Click to collapse
if we made a custom Rom from..than yes will try something tonight..using only kernel and system and look if it boot
itskapil said:
Our Galaxy S6 Edge just got the Android 5.1 update! It's for G900F set.
Be sure before applying the 5.1 update using Odin as root isn't available yet for the Samsung's 5.1 update. You cannot rollback to previous bootloader either, it's protected now.
Here's the link to download the full firmware.
Download Link
Click to expand...
Click to collapse
You mean it is for G925F, not G900F
Firmware Details:
ModelSM-G925FModel nameGALAXY S6 EdgeCountryUnited Kingdom / IrelandVersionAndroid 5.1.1Changelist5012324Build dateFri, 19 Jun 2015 22:28:37 +0000Product codeXEUPDAG925FXXU2BOFJCSCG925FOXA2BOFJ
Sent from my SM-G925F
Anybody that has already updated can tell me if ram management issue has been fixed?
Enviado desde mi SM-G925F mediante Tapatalk
ruben_2s said:
Anybody that has already updated can tell me if ram management issue has been fixed?
Enviado desde mi SM-G925F mediante Tapatalk
Click to expand...
Click to collapse
Not at all.
Can I flash this XEU firmware on NEE phone?
Sent from my SM-G925F using XDA Free mobile app
What's the changelog? Any different than tmobile
Sent from my SM-G925T
I'm downloading the ota now under 700mb
UK simfree model
TommiP77 said:
Can I flash this XEU firmware on NEE phone?
Sent from my SM-G925F using XDA Free mobile app
Click to expand...
Click to collapse
Yes
There are some camera upgrade like raw support and manual shutter speed?
Anyone willing to make a Mega mirror?
RagePX said:
Anyone willing to make a Mega mirror?
Click to expand...
Click to collapse
Few min ..
mettleh3d said:
What's the changelog? Any different than tmobile
Sent from my SM-G925T
Click to expand...
Click to collapse
No changes from the t mobile version that I can see. All the same and no guest mode
Can someone else check their Camera FW details and see if their's got upgraded? You can see the phone has a newer firmware thats not been pushed to the camera hardware.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
boostermbkking said:
There are some camera upgrade like raw support and manual shutter speed?
Click to expand...
Click to collapse
No raw support and shutter speed don't appear in here [emoji22] samsung is beginning to stay behind against the LG g4 camera options
Fauert said:
Few min ..
Click to expand...
Click to collapse
Eagerly awaiting

new lolipop update vb313 for TL10 link for all

Hello all
Just got that ota today it is v 5.1.1 with new features like super night mod
For TL10 just uploaded the software for you all
http://www.mediafire.com/?2dl93fmyb6nlb31
https://drive.google.com/file/d/0B_Yt1wXTLc1zMkZuVjJZem9ZTkE/view?usp=docslist_api
thank you.. any tips to upgrade ? what version do you have before ?
paulopais said:
thank you.. any tips to upgrade ? what version do you have before ?
Click to expand...
Click to collapse
V128
notification access its working ?
paulopais said:
notification access its working ?
Click to expand...
Click to collapse
Yea but you should make factory reset before installation
rowihel2012 said:
Yea but you should make factory reset before installation
Click to expand...
Click to collapse
ok.. i have 308 .. i have to rollback before ??
paulopais said:
ok.. i have 308 .. i have to rollback before ??
Click to expand...
Click to collapse
Really dont shure about that you may try install over 308
What is funny that some one tried to get back to kitkat by 308 rollback and it worked
Is the dts working on this one ?
rollback in process
bluelavender said:
Is the dts working on this one ?
Click to expand...
Click to collapse
yea working fine
rowihel2012 said:
yea working fine
Click to expand...
Click to collapse
i can´t find b128.. do you have it ?
paulopais said:
i can´t find b128.. do you have it ?
Click to expand...
Click to collapse
You have to flash b120 first then make ota update to b123 then finally ota update to b128 there is no other way ??
Sent from my HUAWEI MT7-TL10 using Tapatalk
hany ahmed79 said:
You have to flash b120 first then make ota update to b123 then finally ota update to b128 there is no other way
Sent from my HUAWEI MT7-TL10 using Tapatalk
Click to expand...
Click to collapse
i have flash b120 then the next update go direct to b125 :|
paulopais said:
i have flash b120 then the next update go direct to b125 :|
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HUAWEI MT7-TL10 using Tapatalk
hany ahmed79 said:
View attachment 3410003
Sent from my HUAWEI MT7-TL10 using Tapatalk
Click to expand...
Click to collapse
:\ any solution? for me? i have installed MT7-TL10_V100R001C00B120SP04_Firmware_West European Region_Channel_Android 4.4.2_EMUI 3.0 .. then the next update go direct to b125
---------- Post added at 01:45 AM ---------- Previous post was at 01:28 AM ----------
hany ahmed79 said:
View attachment 3410003
Sent from my HUAWEI MT7-TL10 using Tapatalk
Click to expand...
Click to collapse
what version b120 you have? can you share it?
rowihel2012 said:
yea working fine
Click to expand...
Click to collapse
Nice will try this then
bluelavender said:
Nice will try this then
Click to expand...
Click to collapse
what version do you have? i already make a rollback and can´t install :|
rowihel2012 said:
Hello all
Just got that ota today it is v 5.1.1 with new features like super night mod
For TL10 just uploaded the software for you all
http://www.mediafire.com/?2dl93fmyb6nlb31
https://drive.google.com/file/d/0B_Yt1wXTLc1zMkZuVjJZem9ZTkE/view?usp=docslist_api
Click to expand...
Click to collapse
Im on B128 and in egypt also but I didn't get the OTA could you plz help ya zamala do you think what was the problem ??
Sent from my HUAWEI MT7-TL10 using XDA Free mobile app
after a lot of roms b119, b120, b123, b125.. i cant update to 313 :|
paulopais said:
after a lot of roms b119, b120, b123, b125.. i cant update to 313 :|
Click to expand...
Click to collapse
need to be in 128 i cant find any link in net to it
can you find it?

[5.1.1][D6653] Z3 - 23.4.A.1.264 - PreRooted + XZDual recovery

Hi members of XDA,
I created a pre-Rooted + dual recovery
DO NOT FLASH THIS IF YOU DONT KNOW WHAT YOU DO, DONT BLAME ME IF YOUR DEVICE EXPLODE
whath do you need?
A)D6653 model
B) functional recovery (TWRP).
Steps:
1) Put "D6653_23.4.A.1.264_Customized HK-SuperSU-v2.46-XZdualrecovery2.8.21-signed", in your internal memory.
2) Reboot in to recovery TWRP (yes only TWRP)
3) Make a BackUp (optional of course)
4) Wipe caches
5) Flash D6653_23.4.A.1.264_Customized HK-SuperSU-v2.46-XZdualrecovery2.8.21-signed ( flash with TWRP)
6)done!
Download: https://www.androidfilehost.com/?fid=24269982087017785
do you like it? just press thanks :good:
Remeber, if you want xposed, use official rovo89's "xposed-v79-sdk22-arm.zip"
Do not use romracer's unofficial xposed.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
panchuckles said:
Remeber, if you want xposed, use official rovo89's "xposed-v79-sdk22-arm.zip"
Do not use romracer's unofficial xposed.
View attachment 3586805
Click to expand...
Click to collapse
Thanks. Will try later today
Do you have path fully deodex
Quoclam851995 said:
Do you have path fully deodex
Click to expand...
Click to collapse
Only odex
Hi i just want to ask if this procedure and this "D6653_23.4.A.1.264_Customized HK-SuperSU-v2.46-XZdualrecovery2.8.21-signed" will work if im in Philippines ??
My Phone is - Z3 D6653 build 23.4.A.1.264 and android version 5.1.1
Thank you and i do appreciate if you can send me an email [email protected] regarding this matters
genertapales said:
Hi i just want to ask if this procedure and this "D6653_23.4.A.1.264_Customized HK-SuperSU-v2.46-XZdualrecovery2.8.21-signed" will work if im in Philippines ??
My Phone is - Z3 D6653 build 23.4.A.1.264 and android version 5.1.1
Thank you and i do appreciate if you can send me an email [email protected] regarding this matters
Click to expand...
Click to collapse
Yes, it Will work
panchuckles said:
Yes, it Will work
Click to expand...
Click to collapse
Thanks for your,
whats the meaning of "HK" in D6653_23.4.A.1.264_Customized HK-SuperSU-v2.46-XZdualrecovery2.8.21-signed
does it cause issue on my signal? because i want to make sure that our Network provider here in philippines will work with this rom
HK mean HongKong Region only.. Will work at any country
genertapales said:
Thanks for your,
whats the meaning of "HK" in D6653_23.4.A.1.264_Customized HK-SuperSU-v2.46-XZdualrecovery2.8.21-signed
does it cause issue on my signal? because i want to make sure that our Network provider here in philippines will work with this rom
Click to expand...
Click to collapse
Hk=hongkong, and no, it does not cause any issue in your signal. the región name is used only for preinstalls apps, apps from hongkong región (you can uninstall them)
The signal depend of you model (d6653, d66xx...)
i have kitkat z3 d6653, after rooting and twrp installed, can i flash this directly?
nuvkyl20 said:
i have kitkat z3 d6653, after rooting and twrp installed, can i flash this directly?
Click to expand...
Click to collapse
Yes, you can
panchuckles said:
Remeber, if you want xposed, use official rovo89's "xposed-v79-sdk22-arm.zip"
Do not use romracer's unofficial xposed.
View attachment 3586805
Click to expand...
Click to collapse
Q. will official rovo89's "xposed-v80-sdk22-arm.zip" work on this rom?
A. Yes, it works.i just tried this update on my .264 rooted Z3.
chandanbs said:
will official rovo89's "xposed-v80-sdk22-arm.zip" work on this rom?
Click to expand...
Click to collapse
It should.
anyway you can Download from rovo's thread "uninstaller", if after flash the zip ( v80) you get in to bootloop, you can flash unistaller and every is fine again.
Enviado desde mi D6653 mediante Tapatalk
i need to unlock the bootloader for root?, or i can with kingroot?
josepetit said:
i need to unlock the bootloader for root?, or i can with kingroot?
Click to expand...
Click to collapse
You can root with kingroot if you want, or downgrade to 4.4.4 and root with griefroot.
panchuckles said:
You can root with kingroot if you want, or downgrade to 4.4.4 and root with griefroot.
Click to expand...
Click to collapse
ok, i have root with kingroot, and i can install xzdual recovery, what is the correct version for xposed? have any link? please. best regards!
is this a new firmware? my current version is 23.4.A.232
xXGageXx said:
is this a new firmware? my current version is 23.4.A.232
Click to expand...
Click to collapse
Is the Last versión of LP, posted in december!
josepetit said:
ok, i have root with kingroot, and i can install xzdual recovery, what is the correct version for xposed? have any link? please. best regards!
Click to expand...
Click to collapse
Second post bro
Enviado desde mi D6653 mediante Tapatalk

XT1092 Rolling-out Update 24.221.7 en EU

New Update received this morning (about 188Mo)
Someone knows what's new inside ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Well, a security update, it says so in the description
It brings it up to date to the august security bulletin, see https://www.reddit.com/r/MotoX/comments/58a1hf/moto_x_2014_eu_retail_august_security_update/
I wonder if this update resolves the Bluetooth issues, had chance to test anything? At 188mb I cant see this only covering a few months of security updates.
I hope that it has some bugfixes.
Enviado desde mi XT1095 mediante Tapatalk
Why i not receive update ?
netokee said:
New Update received this morning (about 188Mo)
Someone knows what's new inside ?
View attachment 3911492
View attachment 3911493
Click to expand...
Click to collapse
I've gotten the same update, in the same country. It just brings the August security patch to your phone, but the system remains under 6.0 Marshmallow.
Sent from my XT1092 using XDA-Developers mobile app
Any link available for the factory image?
XMoDuLeSx said:
Any link available for the factory image?
Click to expand...
Click to collapse
Yes pls...xt1092 or 1095 if there is one..thanks..
Sent from my XT1097 using Tapatalk
Extremely slow...
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100
Looks like files were moved around:
Another one for RETCA -7
https://mirrors.lolinet.com/firmware/moto/victara/official/RETCA/
TMO RETUS -7
https://mirrors.lolinet.com/firmware/moto/victara/official/TMO/
RETBR -7
https://mirrors.lolinet.com/firmware/moto/victara/official/RETBR/
Now also RETES, RETMX, AMXPR (?)
Gus Ghanem said:
Extremely slow...
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100
Looks like files were moved around:
Another one for RETCA -7
https://mirrors.lolinet.com/firmware/moto/victara/official/RETCA/
TMO RETUS -7
https://mirrors.lolinet.com/firmware/moto/victara/official/TMO/
RETBR -7
https://mirrors.lolinet.com/firmware/moto/victara/official/RETBR/
Click to expand...
Click to collapse
Thanks mate...but i have retail brasil with cid 12, is it possible to flash firmware with lower cid? Thanks
Sent from my XT1097 using Tapatalk
so no 6.0.1 yet right?
Did anyone capture the OTA link?
http://www.androidsage.com/2016/01/21/how-to-capture-ota-update-url-for-your-android-device/
pepexzz said:
so no 6.0.1 yet right?
Click to expand...
Click to collapse
Yes, still 6.0
Sent from my GT-N8013 using XDA-Developers mobile app
demonshouter said:
Thanks mate...but i have retail brasil with cid 12, is it possible to flash firmware with lower cid? Thanks
Sent from my XT1097 using Tapatalk
Click to expand...
Click to collapse
I think you can flash any Victara XT109x firmware on a Moto X 2014 (as long as you don't downgrade the bootloader or partition table), but you may need the modem/baseband for your region/carrier.
Again UK xt1092 left out?
where can i get the root boot for the last update for xt1092?
Thanks
Pff this is the second time the update screen says "6.0.1" and it turns out to be 6.0.0. I'd love to get 6.0.1 because it fixes the delay between selecting text and the options dialog popping up AND new emojis (I'm seeing a lot of [X]'s in posts and comments these days..). Oh well. Guess I'm going to block the Moto Update Services app for now, check back in a few months..
Just wanted to drop a link to the OTA that I copied from my device:
https://stor4ge.rejh.nl/_stored/var...ictara_reteu.reteuall.en.EU-from-24.201.3.zip
To be clear: this is the OTA update for XT1092 devices running 24.201.3 victara_reteu.reteuall.en.EU and should update it to 24.221.7
I'll probably update this link later on and point it to Mega.nz
UPDATE: Here's the Mega link:
https://mega.nz/#!gQVwmZ4S!pD0j-elzbekPEJv--LIe9c20EkXxNM9wEzad1iu8jfY
Cheers
Rejh said:
Just wanted to drop a link to the OTA that I copied from my device:
https://stor4ge.rejh.nl/_stored/var...ictara_reteu.reteuall.en.EU-from-24.201.3.zip
To be clear: this is the OTA update for XT1092 devices running 24.201.3 victara_reteu.reteuall.en.EU and should update it to 24.221.7
I'll probably update this link later on and point it to Mega.nz
UPDATE: Here's the Mega link:
https://mega.nz/#!gQVwmZ4S!pD0j-elzbekPEJv--LIe9c20EkXxNM9wEzad1iu8jfY
Cheers
Click to expand...
Click to collapse
Thank you! :good:
Downloaded, rebooted to stock recovery, update from sd card and done. Working great XT1092 reteu retin
Rejh said:
Just wanted to drop a link to the OTA that I copied from my device:
To be clear: this is the OTA update for XT1092 devices running 24.201.3 victara_reteu.reteuall.en.EU and should update it to 24.221.7
I'll probably update this link later on and point it to Mega.nz
Cheers
Click to expand...
Click to collapse
thanks. How to install it?

Categories

Resources