Database Users

[Q] Unable to enter ClockWorkMod

Hi, wanted to ask why am i unable to enter clockworkmod after updating to 4.1.1 official firmware. I've already uninstall and reinstall clockworkmod a few times and the problem is still there. Will appreciate the feedback in the forum. Thanks in advance.

Did you do this:
lsherif said:
Just follow the below steps :
if you are still getting the stock recovery 3e follow these steps :
1. When flashing CWM through odin untick the "Auto Reboot" option within Odin.
2. Flash CWM.
3. When done , press power & volume up ( the one apart from power button ) until the Samsung logo appears, then leave both buttons.
4. CWM will appear.
5. Choose "Reboot System now "
6. You will get a new screen with an option mentioning something like " disable flash recovery , press it & reboot.
7. Now if you get back to pressing power & volume up you will have a permanent CWM.
Then you can install root through CWM.
Click to expand...
Click to collapse
Sent from my GT-N8010 using xda app-developers app

mauricewal said:
Did you do this:
Sent from my GT-N8010 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help. Found out the problem from your reply; forgot to unchecked auto reboot.

You dont require CWM anymore to root, you can root using exynos exploit patch apk with just a click

samir_a said:
You dont require CWM anymore to root, you can root using exynos exploit patch apk with just a click
Click to expand...
Click to collapse
Thanks for the update

Rooting without flashing a new Rom (tested it myself!)

First of all, this is not a work of mine. I'm not a developer. I just want to share this root method that i found without having to flash a new ROM. Thank faisalxp, not me.
This method is tested on my GT-I8190 with firmware 4.1.2 I8190DXALL3 (indonesia). I'm not responsible of any damage this method caused. Now, lets get started!
1. Download CWM recovery from http://forum.xda-developers.com/showthread.php?t=2108614 and follow the instructions there.
2. Download update.zip from http://forum.xda-developers.com/attachment.php?attachmentid=1682974&d=1359355131 (Updated file below)
3. Copy update.zip to SDCARD
4. Enter recovery mode by turning off your phone (if you haven't) and press and hold Power button + Volume up button + Home button at the same time and release when the samsung logo shows up
NOTE: to navigate the recovery mode, Up is volume up, Down is volume down, and to choose a option press the power button
5. After you're in recovery mode install update.zip by selecting "install zip from sd card" then "choose zip from sdcard" (or from external sdcard) then choose the update.zip you previously copied. Wait for the installation to finish, then Reboot your device by selecting "reboot system now"
6. To check whether your device is rooted, download Root Checker from play store and run it, or check whether the SuperSu is available on the menu.
7. If it works, Congratulations! Your Galaxy S III mini is now rooted!
NOTE: This method will increase your Binary Counter, But you can change it back with TriangleAway!
UPDATE: The latest update.zip file by faisalxp http://forum.xda-developers.com/showpost.php?p=38771421&postcount=25

Does it work on 4.1.1?
Sent from my Samsung Galaxy S3 Mini

catanzaro27 said:
Does it work on 4.1.1?
Sent from my Samsung Galaxy S3 Mini
Click to expand...
Click to collapse
i'm pretty sure it does, but i cant guarantee it since i havent tested it yet on 4.1.1...

BramGamerz said:
First of all, this is not a work of mine. I'm not a developer. I just want to share this root method that i found without having to flash a new ROM. Thank faisalxp, not me.
This method is tested on my GT-I8190 with firmware 4.1.2 I8190DXALL3 (indonesia). I'm not responsible of any damage this method caused. Now, lets get started!
1. Download CWM recovery from http://forum.xda-developers.com/showthread.php?t=2108614 and follow the instructions there.
2. Download update.zip from http://forum.xda-developers.com/attachment.php?attachmentid=1682974&d=1359355131
3. Copy update.zip to SDCARD
4. Enter recovery mode by turning off your phone (if you haven't) and press and hold Power button + Volume up button + Home button at the same time and release when the samsung logo shows up
NOTE: to navigate the recovery mode, Up is volume up, Down is volume down, and to choose a option press the power button
5. After you're in recovery mode install update.zip by selecting "install zip from sd card" then "choose zip from sdcard" (or from external sdcard) then choose the update.zip you previously copied. Wait for the installation to finish, then Reboot your device by selecting "reboot system now"
6. To check whether your device is rooted, download Root Checker from play store and run it, or check whether the SuperSu is available on the menu.
7. If it works, Congratulations! Your Galaxy S III mini is now rooted!
NOTE: you should upgrade your busybox from the play store, so the root works better.
Click to expand...
Click to collapse
Yeah This Work For ICS Or Jely Bean And All Stock Rom...Note : If You Success Root Witch This Methode, You Must Update BusyBox..Search in Play store, Install And Update BusyBox...!!! Thanks To You BramGamerz For Share My Root Methode b:Angel

Creator of this method, please send me pm. I have things to ask you.
Sent from my GT-I8190 using xda app-developers app

this will not work on all sgs3 mini because after you flash CWM on some phones you will not be able to enter recovery mode by pressing Power button + Volume up button + Home it is an unknown bug on CWM , for any other method to go in recovery mode you need your phone already rooted

evilinside said:
this will not work on all sgs3 mini because after you flash CWM on some phones you will not be able to enter recovery mode by pressing it is an unknown bug on CWM , for any other method to go in recovery mode you need your phone already rooted
Click to expand...
Click to collapse
Not being able to get to recovery with Power button + Volume up button + Home is not because of CWM.
I havn't been able to do that ever. Probably different bootloader versions in the first batch or something.

Hello what is what this manipulation works on galaxy s3 mini i8190N 4.1.2 Roma to operateur sfr?
And what sound risks them if the manipe echoue?
Thank you

I found a workaround for this , but you will need a PC in order to do that , even if your phone is not rooted you can enable debug mode from phone settings , and run from ADB : | adb reboot recovery | you will be able to go to CWM menu and flash update.zip which will root your phone.

evilinside said:
I found a workaround for this , but you will need a PC in order to do that , even if your phone is not rooted you can enable debug mode from phone settings , and run from ADB : | adb reboot recovery | you will be able to go to CWM menu and flash update.zip which will root your phone.
Click to expand...
Click to collapse
Captain Obvious strikes again.
Y U NO CHECK STICKY?
Sent from my GT-I8190 using xda app-developers app

can I do this without the CWM recovery?

Nice. Confirm this working. Stock rom rooted.

The key is Successfully Install And Go To CWM past ..... If Success Possible Root Of All The CWM File Using Attach By BramGamerz Can Succeed .... If not Succeed, Try Flash Stock Recovery.Tar.MD5 preemptively New Flash CWM It ... Here I Attach File update.zip Again, With the Latest Superuser and BusyBox - 2013

It has to be stressed that flashing CWM via Odin or Heimdall increases your download counter.
And at the moment triangle away does not support this phone.
So only go ahead with this method if you do not care about Samsung's warranty.

ui_print("***************************");
ui_print("Rooting with SuperSU 0.95");
ui_print("***************************");

Tyxerakias said:
It has to be stressed that flashing CWM via Odin or Heimdall increases your download counter.
And at the moment triangle away does not support this phone.
So only go ahead with this method if you do not care about Samsung's warranty.
Click to expand...
Click to collapse
ive read all around here talking about the download counter...what is it actually and why is it so important?

Sv: Rooting without flashing a new Rom (tested it myself!)
nazri5363 said:
ive read all around here talking about the download counter...what is it actually and why is it so important?
Click to expand...
Click to collapse
Custom binary counter can be seen when in download mode. It's a counter to keep track of non-Samsung signed binaries flashed with Odin. If you need to take your device to Samsung for warranty and they notice it's not at zero, you'll not under warranty anymore.
Sent thru time and space from my s3mini.

faisalxp said:
Yeah This Work For ICS Or Jely Bean And All Stock Rom...Note : If You Success Root Witch This Methode, You Must Update BusyBox..Search in Play store, Install And Update BusyBox...!!! Thanks To You BramGamerz For Share My Root Methode b:Angel
Click to expand...
Click to collapse
Will this increase the binary counter ?
thanks

oland681 said:
Will this increase the binary counter ?
thanks
Click to expand...
Click to collapse
Yes Increase Binary Counter Because Flash Image CWM, Find Image CWM With Not Increase Binary Counter N Flash With ODIN If You Like Not Increased Binary Counter.

faisalxp said:
Yes Increase Binary Counter Because Flash Image CWM, Find Image CWM With Not Increase Binary Counter N Flash With ODIN If You Like Not Increased Binary Counter.
Click to expand...
Click to collapse
ok, Many Thanks

Galaxy Grand (Root Guide Fast Root)

Dowload file below

Is there a way to root without using desktop or lappy and if its safe
Sent from my GT-I9082 using xda app-developers app

Uhmm... Did we really need another root guide which is basically a copy of @chotu222 guide
Sent from my GT-I9082 using Tapatalk

Everyone knows how to root galaxy grand ....
No need another rooting guide ... Which is just a copy of the original....
By the way where is the download links of cwm touch and super user ?
Sent from my GT-I9505 using xda app-developers app

ummmmm...
Obsessed_69 said:
Is there a way to root without using desktop or lappy and if its safe
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
Sorry no. If i can i will make auto root app. I can make it but i dont know what is the code

I know it
simplyanin said:
Everyone knows how to root galaxy grand ....
No need another rooting guide ... Which is just a copy of the original....
By the way where is the download links of cwm touch and super user
Click to expand...
Click to collapse
Yes i know it but there is some mistake in his thread. I tried his guide for root and install cwm but it still no CWM recovery. And now i know the original guide for root and install cwm.

mantan gm said:
Yes i know it but there is some mistake in his thread. I tried his guide for root and install cwm but it still no CWM recovery. And now i know the original guide for root and install cwm.
Click to expand...
Click to collapse
what mistake? u have also mistake auto reboot must not check when u flash the recovery..

.
10xian04 said:
what mistake? u have also mistake auto reboot must not check when u flash the recovery..
Click to expand...
Click to collapse
Hey if the auto reboot is not checked it will FAIL. And you get firmware error then you cant do anything. You just can retry flashing recovery. I tried his guide and fail you know FAIL!!

Guys I got 4.2.2 stock.. no root.. I cant und why does my phone hang and it will not respond for 2-3mins.. sometimes 5min and dn I go a hard restart n dn it works normal..
I use clean master n toucher pro to kill task everytime I am operating my cell..
Can anyone of u help me so this phne doesnt hang so much.. m tiered killng task 24x7
Sent from my GT-I9082 using xda app-developers app

Obsessed_69 said:
Guys I got 4.2.2 stock.. no root.. I cant und why does my phone hang and it will not respond for 2-3mins.. sometimes 5min and dn I go a hard restart n dn it works normal..
I use clean master n toucher pro to kill task everytime I am operating my cell..
Can anyone of u help me so this phne doesnt hang so much.. m tiered killng task 24x7
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
Kil task? Why do you not from task manager?

Yes do frm tast manager.. and I mean ram boost which kills background running app
Sent from my GT-I9082 using xda app-developers app

Anyone got any idea to help me out.. this phone lags and freezes.. plz tell me anything I can do about it
Thanks

mantan gm said:
By root your phone, you can :
#Hack some game
#Use screencast
#Backups (Titanium Backup)
#And use many more root program
Tools :
1.Download SuperSu 1.51 and Fix-Recovery.zip , place it : External Data
2.Download CWM Touch Recovery in your computer. And download Odin
How to root :
1.Open odin and make sure Auto Reboot and F.Reset Time is checked
2.Click on PDA Button and Choose your CWM md5 file
3.Enter Download mode in your galaxy grand by pressin "Vol.down + Home button + Power button"
4.Connect your Phone to Computer using USB
5.Click Start in Odin
6.if this success you will get PASS text, but if Failed you will get FAIL text
7.if you get PASS text your phone will auto reboot
8.if you see the SAMSUNG GALAXY GRAND DUOS GT-i9082 text, you must enter recovery mode (Vol.Up + Power + Home) before your phone is rebooted
9.Now you have entered CWM recovey mode. Now you just follow this (choose install from sdcard --> choose Fix-Recovery.zip --> choose SuperSu 1.51.zip --> Back and choose reboot
10.Yeeeey your phone now is rooted
Click to expand...
Click to collapse
its hang . how to fix

I was also faced the same issue with my Samsung galaxy Grand duos. So I format my mobile & rooted. Now phone is working smoothly without any hanging issue.
Sent from my GT-I9082 using XDA Premium 4 mobile app

HI,
I am on currently 4.2.2 version & new to rooting seen all forum
Just has few question please
1.Open odin and make sure Auto Reboot and F.Reset Time is checked (Do i have to check or uncheck auto reboot )
2.Click on PDA Button and Choose your CWM md5 file
3.Enter Download mode in your galaxy grand by pressin "Vol.down + Home button + Power button"
4.Connect your Phone to Computer using USB
5.Click Start in Odin
6.if this success you will get PASS text, but if Failed you will get FAIL text
7.if you get PASS text your phone will auto reboot
8.if you see the SAMSUNG GALAXY GRAND DUOS GT-i9082 text, you must enter recovery mode (Vol.Up + Power + Home) before your phone is rebooted
9.Now you have entered CWM recovey mode. Now you just follow this (choose install from sdcard --> choose Fix-Recovery.zip --> choose SuperSu 1.51.zip --> Back and choose reboot
Q 1 which one recovery i choose chotu one or pawitp & in both i have fix recovery in cwm mode please help
Q 2 If rooted sucessfully can i update CWM version As needed for kitkat version custom rom

OO-z31r3n said:
its hang . how to fix
Click to expand...
Click to collapse
Reflash the whole firmware with odin
---------- Post added at 10:14 AM ---------- Previous post was at 10:12 AM ----------
dheervijay said:
HI,
I am on currently 4.2.2 version & new to rooting seen all forum
Just has few question please
1.Open odin and make sure Auto Reboot and F.Reset Time is checked (Do i have to check or uncheck auto reboot )
2.Click on PDA Button and Choose your CWM md5 file
3.Enter Download mode in your galaxy grand by pressin "Vol.down + Home button + Power button"
4.Connect your Phone to Computer using USB
5.Click Start in Odin
6.if this success you will get PASS text, but if Failed you will get FAIL text
7.if you get PASS text your phone will auto reboot
8.if you see the SAMSUNG GALAXY GRAND DUOS GT-i9082 text, you must enter recovery mode (Vol.Up + Power + Home) before your phone is rebooted
9.Now you have entered CWM recovey mode. Now you just follow this (choose install from sdcard --> choose Fix-Recovery.zip --> choose SuperSu 1.51.zip --> Back and choose reboot
Q 1 which one recovery i choose chotu one or pawitp & in both i have fix recovery in cwm mode please help
Q 2 If rooted sucessfully can i update CWM version As needed for kitkat version custom rom
Click to expand...
Click to collapse
#1 Uncheck Auto reboot
#2 If you want to install kitkat rom, use pawitp's
#3 See answer 2
---------- Post added at 10:16 AM ---------- Previous post was at 10:14 AM ----------
akiratoriyama said:
Uhmm... Did we really need another root guide which is basically a copy of @chotu222 guide
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
DELETED (reason: bit offensive)

super su not working
my supersu is not working ........when ever i apply from sd card nd select superuser su 1.51 file its coming like signature verification failed....nd phone is restarting

yousuf magar said:
my supersu is not working ........when ever i apply from sd card nd select superuser su 1.51 file its coming like signature verification failed....nd phone is restarting
Click to expand...
Click to collapse
Flash the SuperSU from here, it's the latest CWM flashable with much better overall root and kitkat support
http://download.chainfire.eu/382/SuperSU

You must flash with CWM not a normal recovery

thanku sir

[Q] how to root Nexus 10 (upgraded to Kit Kat 4.4)

Newbie here.
Pls guide me..
Many tks!
Sent from my SM-N9005 using xda app-developers app

Hi!
You can easily boot a custom recovery and then install the SuperSU.zip from there .
1 - Download the SuperSU zip from here: http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip.
2 - Copy it to your Nexus 10 root folder (the one where it's located Download, DCIM, Android, etc)
3 - Download the .img file from here: http://www.teamw.in/project/twrp2/128, then rename it to recovery.img
4 - Copy it to your fastboot/adb folder (if you doesn't have one search for how to get it)
5 - Plug your Nexus 10 in your PC
6 - Turn USB Debugging on (Settings --> About Tablet --> Press many times Build Number --> Developer Options --> On --> USB Debugging)
7 - Open a cmd in your PC and go to your adb/fastboot folder, then type:
Code:
adb reboot bootloader
(When the screen turns on you type) fastboot boot recovery.img
Wait for it to turn on and then click install, select the SuperSU.zip and then confirm. Then it's done . If you can't get this way working you can try one of the many tools in the Development thread. I'm sure one will work with you .
~Lord

Issues with rooting (4.4), stuck after flashing recovery
I just got my Nexus 10, and unlocked the boot loader, then flashed the custom recovery. All was fine, and I could boot into recovery, however recovery can not mount any filesystems. So I rebooted, now the Nexus does not boot, but hangs on the intro animation, normally meaning in my experience that the kernel is looped and is no longer finding (or else) booting the OS. I've tried booting 3 times.
So then, the steps I took,
enable USB debugging
were copy over the zip file for supersu
reboot to (fastboot mode), verify device
unlock boot loader "fastboot oem unlock"
flash the recovery "recovery-clockwork-touch-6.0.4.3-manta"
reboot into recovery
Failed to mount filesystems
for instance "E: Can't mount /cache/recovery/command or E:Can't mount /sdcard .... (you get the idea).
rebooting again a leaving it does nothing.
I also tried side loading a new image in my case "ThunderKat_manta-KRT16S-20131201" and after installing the "UniversalAdbDriverSetup", I was able to do so, I also was also able to side load the google apps "GoogleAppsPack-4.4-20131128", in both cases I get a success message after the install, however there after when I attempt to reboot I'm still stuck looking at the boot animation.
Now I'm really confused as if if the OS was destroyed when I unlocked the device, then side load of the zip contains a new kernel and OS image so it should be working, but it is not. In fact, recovery while still working throws the same can not mount exceptions after the flash as it did before (I rebooted) as I was previously getting and a factory reset, fails to mount /data, but does flash /cache and sd-ext without issues, so again I'm lost as to what to do.
Best guess I have is that partitions such as /data are just missing, I have no idea the state of teh device in such a case, but recovery and side loading using adb are working, how do I recover a working ANDROID OS from here?
Thanks,
ERIC

stuck in loading screen
Hi,
i just got my Nexus 10 yesterday. I tried to root it, but it is stuck in the loading screen. What can i do now? Can i like undo it to get it back to work?
I have the same issue egandt described.
Edit: I just got it back with this tutorial to android 4.2.2 and now i am updating it back up
nexus10root.com/nexus-10-unroot/how-to-unrootunbrick-nexus-10-factory-firmware/

I unlocked nexus10,
Flashed cwm,
Installed su, but whn i turned it on, su not found, rootchecker shows no root access..
I also encounter bootloop initially,
Need to wide data / factory reset then its normally booted..
Sent from my SM-N9005 using xda app-developers app

Agreed the factory reset was required to fix the issues I encountered, then installing super-su worked.

I still cannot root the Nexus10..
Any one can help?
Thanks in advance!

XxLordxX said:
Hi!
You can easily boot a custom recovery and then install the SuperSU.zip from there .
1 - Download the SuperSU zip from here: http://download.chainfire.eu/370/SuperSU/UPDATE-SuperSU-v1.80.zip.
2 - Copy it to your Nexus 10 root folder (the one where it's located Download, DCIM, Android, etc)
3 - Download the .img file from here: http://www.teamw.in/project/twrp2/128, then rename it to recovery.img
4 - Copy it to your fastboot/adb folder (if you doesn't have one search for how to get it)
5 - Plug your Nexus 10 in your PC
6 - Turn USB Debugging on (Settings --> About Tablet --> Press many times Build Number --> Developer Options --> On --> USB Debugging)
7 - Open a cmd in your PC and go to your adb/fastboot folder, then type:
Code:
adb reboot bootloader
(When the screen turns on you type) fastboot boot recovery.img
Wait for it to turn on and then click install, select the SuperSU.zip and then confirm. Then it's done . If you can't get this way working you can try one of the many tools in the Development thread. I'm sure one will work with you .
~Lord
Click to expand...
Click to collapse
Many thanks for the detailed explanation, bro!
Still got following questions:
So do I need to enable "USB Debugging" 1st before unlocking Bootloader?
Although I successfully installed SuperSU, but still lack of SU power, those apps required SU access are not working at all.
the kitkat poisons me... sigh...
Thanks again!

xing369 said:
Many thanks for the detailed explanation, bro!
Still got following questions:
So do I need to enable "USB Debugging" 1st before unlocking Bootloader?
Although I successfully installed SuperSU, but still lack of SU power, those apps required SU access are not working at all.
the kitkat poisons me... sigh...
Thanks again!
Click to expand...
Click to collapse
If you are going to follow the commands he listed in step 7 then yes you need to enable "USB Debugging" before you go ahead and unlock the Bootloader. Installing SuperSU alone will not give you root access, you need to flash the SuperSU .zip file in recovery as the end of step 7 mentions to properly gain root access. If your still confused about anything or have any questions let me know I'll be happy to help you .

shimp208 said:
If you are going to follow the commands he listed in step 7 then yes you need to enable "USB Debugging" before you go ahead and unlock the Bootloader. Installing SuperSU alone will not give you root access, you need to flash the SuperSU .zip file in recovery as the end of step 7 mentions to properly gain root access. If your still confused about anything or have any questions let me know I'll be happy to help you .
Click to expand...
Click to collapse
Thanks for your kind offering of hands!
Last night I tried again to re-flashed latest TWRP as well as latest SuperSU.
I ran 2x Root Checker,
1 said rooted,
1 said no root access, no BusyBox available.
I tried some apps like GMD Gesture, no working or no root access.
So,
Should I redo everything: enable USB Debugging then unlock bootloader then flash CWM then install SuperSU?
I initially gone thru above steps w/o enabling USB Debug..
Many thanks!
Sent from my SM-N9005 using xda app-developers app

Now Nexus10 stuck at boot animation.
Did several data wipe / factory reset, not working...
SOS

xing369 said:
Now Nexus10 stuck at boot animation.
Did several data wipe / factory reset, not working...
SOS
Click to expand...
Click to collapse
https://developers.google.com/android/nexus/images
Download the appropriate factory image, extract it, boot to bootloader and flash everything using fastboot commands/execute the .bat file IF you're running Windows on your computer.

fritzhy said:
https://developers.google.com/android/nexus/images
Download the appropriate factory image, extract it, boot to bootloader and flash everything using fastboot commands/execute the .bat file IF you're running Windows on your computer.
Click to expand...
Click to collapse
Very much appreciated for reviving my nexus!
However, after flashing latest TWRP, and installed SuperSU 1.80,
It seems my nexus still unrooted.
Any ideas?
Thanks!
Sent from my SM-N9005 using xda app-developers app

Do you have SuperSU in your app drawer? If so, open it and see if you have to update the SU binaries. If not, try flashing the SuperSU zip again.
Sent from my C6603 using Tapatalk

fritzhy said:
Do you have SuperSU in your app drawer? If so, open it and see if you have to update the SU binaries. If not, try flashing the SuperSU zip again.
Sent from my C6603 using Tapatalk
Click to expand...
Click to collapse
Thanks for replying!
Yes, got SuperSU app in drawer..
But a silly question: How to update SU binaries?
Sent from my SM-N9005 using xda app-developers app

xing369 said:
Thanks for replying!
Yes, got SuperSU app in drawer..
But a silly question: How to update SU binaries?
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
If it's needed the app will say so when you open it.

fritzhy said:
If it's needed the app will say so when you open it.
Click to expand...
Click to collapse
Sigh..
Seems still 'unrooted'.
Any other ways to get it done?
Thanks!
Sent from my SM-N9005 using xda app-developers app

xing369 said:
Sigh..
Seems still 'unrooted'.
Any other ways to get it done?
Thanks!
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Not that I can think of, nope...

Can't Root in galaxy Core Prime lte G360FXXU1BPI1

Hello,
i can't root in G360FXXU1BPI1 , i try kingroot or other root apllication and none, someone can help me please ?

https://download.chainfire.eu/767/C...etmo-cprimeltetmo-smg360t.zip?retrieve_file=1
will do the job
goodluck

merfim said:
Hello,
i can't root in G360FXXU1BPI1 , i try kingroot or other root apllication and none, someone can help me please ?
Click to expand...
Click to collapse
Try to find an older firmware version that can be flashed with Odin. Usually system updates patch exploits commonly used by one-click root apps, and only an older build will fix the issue. Hope this helps.

hi,
merfim said:
Hello,
i can't root in G360FXXU1BPI1 , i try kingroot or other root apllication and none, someone can help me please ?
Click to expand...
Click to collapse
I also couldn't root my device (galaxy core prime g361h) until i used TWRP and SuperSU, i tried those crappy one click roots none of them worked for me,TWRP and SuperSU are powerful.
First flash TWRP on your device using Odin then flash SuperSU using TWRP

Esma3elo said:
I also couldn't root my device (galaxy core prime g361h) until i used TWRP and SuperSU, i tried those crappy one click roots none of them worked for me,TWRP and SuperSU are powerful.
First flash TWRP on your device using Odin then flash SuperSU using TWRP
Click to expand...
Click to collapse
What TWRP version? Send me the link if you will

hey
Jrhotrod said:
What TWRP version? Send me the link if you will
Click to expand...
Click to collapse
TWRP 3.0.2-0
https://twrp.me/
What more do u want me to do
Root it for you

Esma3elo said:
TWRP 3.0.2-0
https://twrp.me/
What more do u want me to do
Root it for you
Click to expand...
Click to collapse
Okay thanks ☺

Hello sir
Follow my steps for successful TWRP/ROOT
1.)Download and install Samsung USB Drivers
2.)Download TWRP 3.0.2.0
3.)Download Odin
4.)Download SuperSU.zip file
For download links message me or add me on facebook facebook. com/fRoD.cs
After you complete this 4 steps shutdown your phone and enter into Download Mode
Volume Down + Power + Home
Select continue by Volume Up key
Now connect phone with usb cable into pc and run Odin as administrator
Click on AP box and select the twrp.tar file you download before
Go to Options tab and uncheck Auto Reboot, make sure that only F, Reset Time is checked and click start
After successfully installed TWRP , remove the battery, put it back and make sure that you go into recovery mode immediately!!! Volume Up + Power + Home
If you boot up the phone it will restore the original recovery. Thats why you need to go to recovery mode first.
First time you boot in recovery it will be shown a TWRP screen asking to allow modifications to system partition. Swipe to accept that.
Now select Install option and select SuperSU.zip file. By default it should be in Download folder, and swipe to start install
After installing click reboot and your SM-G361F will be rooted. You should have SuperSU app in the menu