Rooting without flashing a new Rom (tested it myself!) - Galaxy S III Mini General

First of all, this is not a work of mine. I'm not a developer. I just want to share this root method that i found without having to flash a new ROM. Thank faisalxp, not me.
This method is tested on my GT-I8190 with firmware 4.1.2 I8190DXALL3 (indonesia). I'm not responsible of any damage this method caused. Now, lets get started!
1. Download CWM recovery from http://forum.xda-developers.com/showthread.php?t=2108614 and follow the instructions there.
2. Download update.zip from http://forum.xda-developers.com/attachment.php?attachmentid=1682974&d=1359355131 (Updated file below)
3. Copy update.zip to SDCARD
4. Enter recovery mode by turning off your phone (if you haven't) and press and hold Power button + Volume up button + Home button at the same time and release when the samsung logo shows up
NOTE: to navigate the recovery mode, Up is volume up, Down is volume down, and to choose a option press the power button
5. After you're in recovery mode install update.zip by selecting "install zip from sd card" then "choose zip from sdcard" (or from external sdcard) then choose the update.zip you previously copied. Wait for the installation to finish, then Reboot your device by selecting "reboot system now"
6. To check whether your device is rooted, download Root Checker from play store and run it, or check whether the SuperSu is available on the menu.
7. If it works, Congratulations! Your Galaxy S III mini is now rooted!
NOTE: This method will increase your Binary Counter, But you can change it back with TriangleAway!
UPDATE: The latest update.zip file by faisalxp http://forum.xda-developers.com/showpost.php?p=38771421&postcount=25

Does it work on 4.1.1?
Sent from my Samsung Galaxy S3 Mini

catanzaro27 said:
Does it work on 4.1.1?
Sent from my Samsung Galaxy S3 Mini
Click to expand...
Click to collapse
i'm pretty sure it does, but i cant guarantee it since i havent tested it yet on 4.1.1...

BramGamerz said:
First of all, this is not a work of mine. I'm not a developer. I just want to share this root method that i found without having to flash a new ROM. Thank faisalxp, not me.
This method is tested on my GT-I8190 with firmware 4.1.2 I8190DXALL3 (indonesia). I'm not responsible of any damage this method caused. Now, lets get started!
1. Download CWM recovery from http://forum.xda-developers.com/showthread.php?t=2108614 and follow the instructions there.
2. Download update.zip from http://forum.xda-developers.com/attachment.php?attachmentid=1682974&d=1359355131
3. Copy update.zip to SDCARD
4. Enter recovery mode by turning off your phone (if you haven't) and press and hold Power button + Volume up button + Home button at the same time and release when the samsung logo shows up
NOTE: to navigate the recovery mode, Up is volume up, Down is volume down, and to choose a option press the power button
5. After you're in recovery mode install update.zip by selecting "install zip from sd card" then "choose zip from sdcard" (or from external sdcard) then choose the update.zip you previously copied. Wait for the installation to finish, then Reboot your device by selecting "reboot system now"
6. To check whether your device is rooted, download Root Checker from play store and run it, or check whether the SuperSu is available on the menu.
7. If it works, Congratulations! Your Galaxy S III mini is now rooted!
NOTE: you should upgrade your busybox from the play store, so the root works better.
Click to expand...
Click to collapse
Yeah This Work For ICS Or Jely Bean And All Stock Rom...Note : If You Success Root Witch This Methode, You Must Update BusyBox..Search in Play store, Install And Update BusyBox...!!! Thanks To You BramGamerz For Share My Root Methode b:Angel

Creator of this method, please send me pm. I have things to ask you.
Sent from my GT-I8190 using xda app-developers app

this will not work on all sgs3 mini because after you flash CWM on some phones you will not be able to enter recovery mode by pressing Power button + Volume up button + Home it is an unknown bug on CWM , for any other method to go in recovery mode you need your phone already rooted

evilinside said:
this will not work on all sgs3 mini because after you flash CWM on some phones you will not be able to enter recovery mode by pressing it is an unknown bug on CWM , for any other method to go in recovery mode you need your phone already rooted
Click to expand...
Click to collapse
Not being able to get to recovery with Power button + Volume up button + Home is not because of CWM.
I havn't been able to do that ever. Probably different bootloader versions in the first batch or something.

Hello what is what this manipulation works on galaxy s3 mini i8190N 4.1.2 Roma to operateur sfr?
And what sound risks them if the manipe echoue?
Thank you

I found a workaround for this , but you will need a PC in order to do that , even if your phone is not rooted you can enable debug mode from phone settings , and run from ADB : | adb reboot recovery | you will be able to go to CWM menu and flash update.zip which will root your phone.

evilinside said:
I found a workaround for this , but you will need a PC in order to do that , even if your phone is not rooted you can enable debug mode from phone settings , and run from ADB : | adb reboot recovery | you will be able to go to CWM menu and flash update.zip which will root your phone.
Click to expand...
Click to collapse
Captain Obvious strikes again.
Y U NO CHECK STICKY?
Sent from my GT-I8190 using xda app-developers app

can I do this without the CWM recovery?

Nice. Confirm this working. Stock rom rooted.

The key is Successfully Install And Go To CWM past ..... If Success Possible Root Of All The CWM File Using Attach By BramGamerz Can Succeed .... If not Succeed, Try Flash Stock Recovery.Tar.MD5 preemptively New Flash CWM It ... Here I Attach File update.zip Again, With the Latest Superuser and BusyBox - 2013

It has to be stressed that flashing CWM via Odin or Heimdall increases your download counter.
And at the moment triangle away does not support this phone.
So only go ahead with this method if you do not care about Samsung's warranty.

ui_print("***************************");
ui_print("Rooting with SuperSU 0.95");
ui_print("***************************");

Tyxerakias said:
It has to be stressed that flashing CWM via Odin or Heimdall increases your download counter.
And at the moment triangle away does not support this phone.
So only go ahead with this method if you do not care about Samsung's warranty.
Click to expand...
Click to collapse
ive read all around here talking about the download counter...what is it actually and why is it so important?

Sv: Rooting without flashing a new Rom (tested it myself!)
nazri5363 said:
ive read all around here talking about the download counter...what is it actually and why is it so important?
Click to expand...
Click to collapse
Custom binary counter can be seen when in download mode. It's a counter to keep track of non-Samsung signed binaries flashed with Odin. If you need to take your device to Samsung for warranty and they notice it's not at zero, you'll not under warranty anymore.
Sent thru time and space from my s3mini.

faisalxp said:
Yeah This Work For ICS Or Jely Bean And All Stock Rom...Note : If You Success Root Witch This Methode, You Must Update BusyBox..Search in Play store, Install And Update BusyBox...!!! Thanks To You BramGamerz For Share My Root Methode b:Angel
Click to expand...
Click to collapse
Will this increase the binary counter ?
thanks

oland681 said:
Will this increase the binary counter ?
thanks
Click to expand...
Click to collapse
Yes Increase Binary Counter Because Flash Image CWM, Find Image CWM With Not Increase Binary Counter N Flash With ODIN If You Like Not Increased Binary Counter.

faisalxp said:
Yes Increase Binary Counter Because Flash Image CWM, Find Image CWM With Not Increase Binary Counter N Flash With ODIN If You Like Not Increased Binary Counter.
Click to expand...
Click to collapse
ok, Many Thanks

Related

[Q] Unable to enter ClockWorkMod

Hi, wanted to ask why am i unable to enter clockworkmod after updating to 4.1.1 official firmware. I've already uninstall and reinstall clockworkmod a few times and the problem is still there. Will appreciate the feedback in the forum. Thanks in advance.
Did you do this:
lsherif said:
Just follow the below steps :
if you are still getting the stock recovery 3e follow these steps :
1. When flashing CWM through odin untick the "Auto Reboot" option within Odin.
2. Flash CWM.
3. When done , press power & volume up ( the one apart from power button ) until the Samsung logo appears, then leave both buttons.
4. CWM will appear.
5. Choose "Reboot System now "
6. You will get a new screen with an option mentioning something like " disable flash recovery , press it & reboot.
7. Now if you get back to pressing power & volume up you will have a permanent CWM.
Then you can install root through CWM.
Click to expand...
Click to collapse
Sent from my GT-N8010 using xda app-developers app
mauricewal said:
Did you do this:
Sent from my GT-N8010 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the help. Found out the problem from your reply; forgot to unchecked auto reboot.
You dont require CWM anymore to root, you can root using exynos exploit patch apk with just a click
samir_a said:
You dont require CWM anymore to root, you can root using exynos exploit patch apk with just a click
Click to expand...
Click to collapse
Thanks for the update

Won't boot to TWRP recovery after flashing to 4.3

Hi all, I'm new here (great place, very informative) and pretty new to the Android scene in general.
As the title said, My AT&T S4 won't boot to recovery after I flashed 4.3 JWR663. Worked fine before and 4.3 is working great, but I can't get to TWRP. When I hold "power + volume up" I get the blue text dialog indicating its going to boot to recovery and the phone just shuts off. I can boot to download mode, but haven't done anything out of fear. I'm not rooted (which is what I'd like to do once this is fixed).
Should I try and re-flash TWRP? Any other suggestions? Feel free to break it down like you're talking to a child. Thanks in advance.
Try flashing it. Get goomanager from the play store. Open it and hit the menu button. Hit install openrecoveryscript.
Sent from my SGH-I337 using xda premium
graydiggy said:
Try flashing it. Get goomanager from the play store. Open it and hit the menu button. Hit install openrecoveryscript.
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
Will that work without root?
Vikingod said:
Will that work without root?
Click to expand...
Click to collapse
You'll need root to flash a recovery with GooManager.
How did you install 4.3? I assume that it's a custom 4.3 as I don't think it has been officially released yet. If it's custom, I'd assume that the ROM had been rooted as well...
theSpam said:
You'll need root to flash a recovery with GooManager.
How did you install 4.3? I assume that it's a custom 4.3 as I don't think it has been officially released yet. If it's custom, I'd assume that the ROM had been rooted as well...
Click to expand...
Click to collapse
I was rooted, but the ROM had it removed and I need to flash Chainfire to get it back. But I can't get into recovery to do so. I think the ROM was done by Jah0n
Is it safe to flash TWRP with Odin now? If so, could you point me to the directions to help me do so. Thanks again for the help.
Found a fix!
My recovery is fine. All I did was power down, try to boot into recovery with "power + volume up + home" and just when the phone vibrated to boot into recovery, I let go of the power button but continued holding the other buttons. It booted into TWRP just fine.
Vikingod said:
Found a fix!
My recovery is fine. All I did was power down, try to boot into recovery with "power + volume up + home" and just when the phone vibrated to boot into recovery, I let go of the power button but continued holding the other buttons. It booted into TWRP just fine.
Click to expand...
Click to collapse
Yep, that's the way you're supposed to get into recovery.
I an able to get in with only power+vol up. Both work for me.
Sent from my SGH-I337 using xda premium
Vikingod said:
Hi all, I'm new here (great place, very informative) and pretty new to the Android scene in general.
As the title said, My AT&T S4 won't boot to recovery after I flashed 4.3 JWR663. Worked fine before and 4.3 is working great, but I can't get to TWRP. When I hold "power + volume up" I get the blue text dialog indicating its going to boot to recovery and the phone just shuts off. I can boot to download mode, but haven't done anything out of fear. I'm not rooted (which is what I'd like to do once this is fixed).
Should I try and re-flash TWRP? Any other suggestions? Feel free to break it down like you're talking to a child. Thanks in advance.
Click to expand...
Click to collapse
Did you try manually booting into recovery with the power and volume button?
quattros said:
Did you try manually booting into recovery with the power and volume button?
Click to expand...
Click to collapse
He fixed his problem a few posts ago...
Sent from my SGH-I337 using xda premium
I have an older phone and after flashing the twrp recovery it won't let me boot into recovery mode at all can someone please give some advice on how I should fix this?
Which phone do you have?
An Alcatel One touch POP D3 4037A
Try using the Alcatel mobile tool to flash back to stock.
TWRP doesn't work
My LG G3 running lineage os 14.1 won't boot into TWRP.
graydiggy said:
He fixed his problem a few posts ago...
Sent from my SGH-I337 using xda premium
Click to expand...
Click to collapse
The blue and black screen start up screen comes up. But it stays like this. This happened since I flashed the lineage ROM. What should I do?
my phone agua rio 4.4.2 kitkat .
After flashing twrp recovery img .
After rebooting it .twrp not installed and it only reboot normal i didnt get to twrp recovery
Need solution pls pls
This thread is about the Samsung Galaxy s4.
Hi there. I'm new of this forum and even of the Android customization scenario. I have a Samsung Galaxy s4 i-9505 with 5.0.1 firmware and build LRX22C.I9505XXUHPK2. I've tried to install TWRP with Odin3 (so without root my phone) and all the procedure goes well. After reboot, I have turned-off my phone and I've tried to enter in the TWRP's recovery mode (using the combo buttons: VolumeUP + Home button + Power button) but the "TEAMWIN" logo didn't appear and the normal "Android Recovery Menu" were visualized.
I need some help to undestand if I did some mistakes during the flashing process. I've used the last versione of TWRP (3.1.1-0 for jfltexx). Any help will be appreciated. Thanks for your attention to this matter.
If you want to root with TWRP, try this for the gt-i9505:
open Odin 3.07 and uncheck everything except r reset time;
download the tar version of twrp for the gt-i9505: https://dl.twrp.me/jfltexx/
download the latest version of supersu.zip and copy it to an sd card or the phone's internal storage: http://www.supersu.com/download;
place the sd card in the phone if twrp has been saved to the sd card from the step above;
connect the phone in download mode and flash twrp in Odin's PDA slot;
when you see the word "reset" in the status window, remove USB cable from the phone, remove battery, replace battery, boot into recovery, install supersu.zip, reboot.
If you just want to install a custom ROM, copy the ROM to the internal or external sd card, install twrp, and install the ROM. Root is not required to install a custom ROM, only a custom recovery.
Warning: whenever you flash anything to a phone, it is always possible for something to go wrong and you must be prepared to deal with any consequences. I have used this method for several note 2, note 3, s3, and s4 phones without any issues. With this being said, I can't guarantee that the above steps will work for your phone or your phone won't be bricked.

[Q] Galaxy S4 GE no root after motochopper

Ok, I'm total noob but not complete idiot. Just want to get that out of the way
I have have the Galaxy S4 Google Edition running Android 4.3.
I unlocked the bootloader before the Android 4.3 update, but have never had root access. I've tried motochopper program, but keep getting failure errors and continued no root.
What I'd like to do is restore my device to stock and run it over again. I'm sure I did something wrong at somepoint.
Can someone please help me?
Thanks
nhlfan14 said:
Ok, I'm total noob but not complete idiot. Just want to get that out of the way
I have have the Galaxy S4 Google Edition running Android 4.3.
I unlocked the bootloader before the Android 4.3 update, but have never had root access. I've tried motochopper program, but keep getting failure errors and continued no root.
What I'd like to do is restore my device to stock and run it over again. I'm sure I did something wrong at somepoint.
Can someone please help me?
Thanks
Click to expand...
Click to collapse
1. Go here and download the CWM / TWRP / MobileODIN installable ZIP
http://forum.xda-developers.com/showthread.php?t=1538053
Place the installable zip on your INTERNAL SD Card.
2. Get CWM:
http://www.clockworkmod.com/rommanager
Go here and grab CWM 6.0.3.6 for the INTERNATIONAL I9505 - yes, it works on the I9505G
Put your phone in fastboot mode by turning off the phone completely. Hold down Vol-Up Vol-Down and power simultaneously.
Since you already seem to have adb, you probably have the fastboot executable.
From your computer's command line type "fastboot boot recovery-clockwork-6.0.3.6-jfltexx.img"
This will boot recovery - temporarily - it will not overwrite the recovery on your phone.
Choose install zip from sdcard. Navigate to the installable zip that you placed on you sdcard in a prior step.
Reboot. When CWM asks to fix "this may overwrite your recovery" SAY NO. Just let it reboot.
You will be rooted. Download and install busybox from the market to complete the process.
bleez99 said:
1. Go here and download the CWM / TWRP / MobileODIN installable ZIP
http://forum.xda-developers.com/showthread.php?t=1538053
Place the installable zip on your INTERNAL SD Card.
2. Get CWM:
http://www.clockworkmod.com/rommanager
Go here and grab CWM 6.0.3.6 for the INTERNATIONAL I9505 - yes, it works on the I9505G
Put your phone in fastboot mode by turning off the phone completely. Hold down Vol-Up Vol-Down and power simultaneously.
Since you already seem to have adb, you probably have the fastboot executable.
From your computer's command line type "fastboot boot recovery-clockwork-6.0.3.6-jfltexx.img"
This will boot recovery - temporarily - it will not overwrite the recovery on your phone.
Choose install zip from sdcard. Navigate to the installable zip that you placed on you sdcard in a prior step.
Reboot. When CWM asks to fix "this may overwrite your recovery" SAY NO. Just let it reboot.
You will be rooted. Download and install busybox from the market to complete the process.
Click to expand...
Click to collapse
Worked like a charm! Only hiccup I had was it wouldn't let me access the file from the SD card, only internal memory.
2nd question is, IF i needed to restore everything to stock again at some point in the future, what steps would I need to take?
nhlfan14 said:
Worked like a charm! Only hiccup I had was it wouldn't let me access the file from the SD card, only internal memory.
2nd question is, IF i needed to restore everything to stock again at some point in the future, what steps would I need to take?
Click to expand...
Click to collapse
Since you have the stock recovery, all you need to do is unroot and you're done. Triangle Away works fine for the I9505G just in case you've bumped you flash counter. Ah yes, search the forums for busybox uninstaller. It's also a flashable zip.
Please hit the thanks button if this helped.
When dialog fails, it's time for violence.
Can someone help me again. I'd like to restore the phone to complete stock. I followed the instuctions here:
http://forum.xda-developers.com/showthread.php?t=2265477
But i get a SECURE CHECK FAIL : SBL2 error.
I just want to start fresh.
thanks.
nhlfan14 said:
Can someone help me again. I'd like to restore the phone to complete stock. I followed the instuctions here:
http://forum.xda-developers.com/showthread.php?t=2265477
But i get a SECURE CHECK FAIL : SBL2 error.
I just want to start fresh.
thanks.
Click to expand...
Click to collapse
Anybody?
nhlfan14 said:
Anybody?
Click to expand...
Click to collapse
U can try follow this guide: HERE

Galaxy Grand (Root Guide Fast Root)

Dowload file below
Is there a way to root without using desktop or lappy and if its safe
Sent from my GT-I9082 using xda app-developers app
Uhmm... Did we really need another root guide which is basically a copy of @chotu222 guide
Sent from my GT-I9082 using Tapatalk
Everyone knows how to root galaxy grand ....
No need another rooting guide ... Which is just a copy of the original....
By the way where is the download links of cwm touch and super user ?
Sent from my GT-I9505 using xda app-developers app
ummmmm...
Obsessed_69 said:
Is there a way to root without using desktop or lappy and if its safe
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
Sorry no. If i can i will make auto root app. I can make it but i dont know what is the code
I know it
simplyanin said:
Everyone knows how to root galaxy grand ....
No need another rooting guide ... Which is just a copy of the original....
By the way where is the download links of cwm touch and super user
Click to expand...
Click to collapse
Yes i know it but there is some mistake in his thread. I tried his guide for root and install cwm but it still no CWM recovery. And now i know the original guide for root and install cwm.
mantan gm said:
Yes i know it but there is some mistake in his thread. I tried his guide for root and install cwm but it still no CWM recovery. And now i know the original guide for root and install cwm.
Click to expand...
Click to collapse
what mistake? u have also mistake auto reboot must not check when u flash the recovery..
.
10xian04 said:
what mistake? u have also mistake auto reboot must not check when u flash the recovery..
Click to expand...
Click to collapse
Hey if the auto reboot is not checked it will FAIL. And you get firmware error then you cant do anything. You just can retry flashing recovery. I tried his guide and fail you know FAIL!!
Guys I got 4.2.2 stock.. no root.. I cant und why does my phone hang and it will not respond for 2-3mins.. sometimes 5min and dn I go a hard restart n dn it works normal..
I use clean master n toucher pro to kill task everytime I am operating my cell..
Can anyone of u help me so this phne doesnt hang so much.. m tiered killng task 24x7
Sent from my GT-I9082 using xda app-developers app
Obsessed_69 said:
Guys I got 4.2.2 stock.. no root.. I cant und why does my phone hang and it will not respond for 2-3mins.. sometimes 5min and dn I go a hard restart n dn it works normal..
I use clean master n toucher pro to kill task everytime I am operating my cell..
Can anyone of u help me so this phne doesnt hang so much.. m tiered killng task 24x7
Sent from my GT-I9082 using xda app-developers app
Click to expand...
Click to collapse
Kil task? Why do you not from task manager?
Yes do frm tast manager.. and I mean ram boost which kills background running app
Sent from my GT-I9082 using xda app-developers app
Anyone got any idea to help me out.. this phone lags and freezes.. plz tell me anything I can do about it
Thanks
mantan gm said:
By root your phone, you can :
#Hack some game
#Use screencast
#Backups (Titanium Backup)
#And use many more root program
Tools :
1.Download SuperSu 1.51 and Fix-Recovery.zip , place it : External Data
2.Download CWM Touch Recovery in your computer. And download Odin
How to root :
1.Open odin and make sure Auto Reboot and F.Reset Time is checked
2.Click on PDA Button and Choose your CWM md5 file
3.Enter Download mode in your galaxy grand by pressin "Vol.down + Home button + Power button"
4.Connect your Phone to Computer using USB
5.Click Start in Odin
6.if this success you will get PASS text, but if Failed you will get FAIL text
7.if you get PASS text your phone will auto reboot
8.if you see the SAMSUNG GALAXY GRAND DUOS GT-i9082 text, you must enter recovery mode (Vol.Up + Power + Home) before your phone is rebooted
9.Now you have entered CWM recovey mode. Now you just follow this (choose install from sdcard --> choose Fix-Recovery.zip --> choose SuperSu 1.51.zip --> Back and choose reboot
10.Yeeeey your phone now is rooted
Click to expand...
Click to collapse
its hang . how to fix
I was also faced the same issue with my Samsung galaxy Grand duos. So I format my mobile & rooted. Now phone is working smoothly without any hanging issue.
Sent from my GT-I9082 using XDA Premium 4 mobile app
HI,
I am on currently 4.2.2 version & new to rooting seen all forum
Just has few question please
1.Open odin and make sure Auto Reboot and F.Reset Time is checked (Do i have to check or uncheck auto reboot )
2.Click on PDA Button and Choose your CWM md5 file
3.Enter Download mode in your galaxy grand by pressin "Vol.down + Home button + Power button"
4.Connect your Phone to Computer using USB
5.Click Start in Odin
6.if this success you will get PASS text, but if Failed you will get FAIL text
7.if you get PASS text your phone will auto reboot
8.if you see the SAMSUNG GALAXY GRAND DUOS GT-i9082 text, you must enter recovery mode (Vol.Up + Power + Home) before your phone is rebooted
9.Now you have entered CWM recovey mode. Now you just follow this (choose install from sdcard --> choose Fix-Recovery.zip --> choose SuperSu 1.51.zip --> Back and choose reboot
Q 1 which one recovery i choose chotu one or pawitp & in both i have fix recovery in cwm mode please help
Q 2 If rooted sucessfully can i update CWM version As needed for kitkat version custom rom
OO-z31r3n said:
its hang . how to fix
Click to expand...
Click to collapse
Reflash the whole firmware with odin
---------- Post added at 10:14 AM ---------- Previous post was at 10:12 AM ----------
dheervijay said:
HI,
I am on currently 4.2.2 version & new to rooting seen all forum
Just has few question please
1.Open odin and make sure Auto Reboot and F.Reset Time is checked (Do i have to check or uncheck auto reboot )
2.Click on PDA Button and Choose your CWM md5 file
3.Enter Download mode in your galaxy grand by pressin "Vol.down + Home button + Power button"
4.Connect your Phone to Computer using USB
5.Click Start in Odin
6.if this success you will get PASS text, but if Failed you will get FAIL text
7.if you get PASS text your phone will auto reboot
8.if you see the SAMSUNG GALAXY GRAND DUOS GT-i9082 text, you must enter recovery mode (Vol.Up + Power + Home) before your phone is rebooted
9.Now you have entered CWM recovey mode. Now you just follow this (choose install from sdcard --> choose Fix-Recovery.zip --> choose SuperSu 1.51.zip --> Back and choose reboot
Q 1 which one recovery i choose chotu one or pawitp & in both i have fix recovery in cwm mode please help
Q 2 If rooted sucessfully can i update CWM version As needed for kitkat version custom rom
Click to expand...
Click to collapse
#1 Uncheck Auto reboot
#2 If you want to install kitkat rom, use pawitp's
#3 See answer 2
---------- Post added at 10:16 AM ---------- Previous post was at 10:14 AM ----------
akiratoriyama said:
Uhmm... Did we really need another root guide which is basically a copy of @chotu222 guide
Sent from my GT-I9082 using Tapatalk
Click to expand...
Click to collapse
DELETED (reason: bit offensive)
super su not working
my supersu is not working ........when ever i apply from sd card nd select superuser su 1.51 file its coming like signature verification failed....nd phone is restarting
yousuf magar said:
my supersu is not working ........when ever i apply from sd card nd select superuser su 1.51 file its coming like signature verification failed....nd phone is restarting
Click to expand...
Click to collapse
Flash the SuperSU from here, it's the latest CWM flashable with much better overall root and kitkat support
http://download.chainfire.eu/382/SuperSU
You must flash with CWM not a normal recovery
thanku sir

Can't Root in galaxy Core Prime lte G360FXXU1BPI1

Hello,
i can't root in G360FXXU1BPI1 , i try kingroot or other root apllication and none, someone can help me please ?
https://download.chainfire.eu/767/C...etmo-cprimeltetmo-smg360t.zip?retrieve_file=1
will do the job
goodluck
merfim said:
Hello,
i can't root in G360FXXU1BPI1 , i try kingroot or other root apllication and none, someone can help me please ?
Click to expand...
Click to collapse
Try to find an older firmware version that can be flashed with Odin. Usually system updates patch exploits commonly used by one-click root apps, and only an older build will fix the issue. Hope this helps.
hi,
merfim said:
Hello,
i can't root in G360FXXU1BPI1 , i try kingroot or other root apllication and none, someone can help me please ?
Click to expand...
Click to collapse
I also couldn't root my device (galaxy core prime g361h) until i used TWRP and SuperSU, i tried those crappy one click roots none of them worked for me,TWRP and SuperSU are powerful.
First flash TWRP on your device using Odin then flash SuperSU using TWRP
Esma3elo said:
I also couldn't root my device (galaxy core prime g361h) until i used TWRP and SuperSU, i tried those crappy one click roots none of them worked for me,TWRP and SuperSU are powerful.
First flash TWRP on your device using Odin then flash SuperSU using TWRP
Click to expand...
Click to collapse
What TWRP version? Send me the link if you will
hey
Jrhotrod said:
What TWRP version? Send me the link if you will
Click to expand...
Click to collapse
TWRP 3.0.2-0
https://twrp.me/
What more do u want me to do
Root it for you
Esma3elo said:
TWRP 3.0.2-0
https://twrp.me/
What more do u want me to do
Root it for you
Click to expand...
Click to collapse
Okay thanks ☺
Hello sir
Follow my steps for successful TWRP/ROOT
1.)Download and install Samsung USB Drivers
2.)Download TWRP 3.0.2.0
3.)Download Odin
4.)Download SuperSU.zip file
For download links message me or add me on facebook facebook. com/fRoD.cs
After you complete this 4 steps shutdown your phone and enter into Download Mode
Volume Down + Power + Home
Select continue by Volume Up key
Now connect phone with usb cable into pc and run Odin as administrator
Click on AP box and select the twrp.tar file you download before
Go to Options tab and uncheck Auto Reboot, make sure that only F, Reset Time is checked and click start
After successfully installed TWRP , remove the battery, put it back and make sure that you go into recovery mode immediately!!! Volume Up + Power + Home
If you boot up the phone it will restore the original recovery. Thats why you need to go to recovery mode first.
First time you boot in recovery it will be shown a TWRP screen asking to allow modifications to system partition. Swipe to accept that.
Now select Install option and select SuperSU.zip file. By default it should be in Download folder, and swipe to start install
After installing click reboot and your SM-G361F will be rooted. You should have SuperSU app in the menu

Categories

Resources