Database Users

Volume setting for pda sound / phone sound and phone ringer

I am looking for a way to set independently the
pda sound: like for notifications & alerts
phone sound: what you hear wen IN a call
ringer sound: what you hear when you are called, before you pick up
I noticed phone & ringer share the same setting: So whenever I set the phone sound louder (because i am in a loud environment), the earth begins to shake when I receive the next call.
Any help / suggestions :?:

pda sound: System events can be turned on/off with a tick at Settings>Sounds & Notifications>Volume , but the slider affects all system.
phone sound actually is the system sound.
ringer sound: it should be possible to set it separately in WM2003 - I know nothing about it (still PPC2002PE - xda-developers Special Edition ROM v1.2)

By the way, you can adjust the ringer volume in the entire .WAV file with SoundForge or something like that. And then - volume up!

I figured out to change the volume of the wav / mid.
But still: It should be possible to have the three different volumes set separately.
In WM2003 there are 2 volume sliders: system (notifications & more) and phone (phone & ringer)

Have you seen the Freeware called PocketZenPhone, just follow the thread on this forum. It does what you are looking for plus more. Hope this is what you mean otherwise sorry.

I tried PocketZenPhone.
To me it introduces easy acces to preset profiles very neatly.
But I did not notice that I could set different volumes for phone sound & ringer . . . .
Maybe I have to give it another try.

edsub said:
I tried PocketZenPhone.
To me it introduces easy acces to preset profiles very neatly.
But I did not notice that I could set different volumes for phone sound & ringer . . . .
Maybe I have to give it another try.
Click to expand...
Click to collapse
Yes it does, but it is only since the past few pages that this was implemented and works great.

Request : Tweak to remove the "ringtone volume" control on HTC

Hello,
Does anybody know if there is an easy way to remove the HTC volume controller for the ringtone on the HTC diamond/pro/blackstone.
Very often I turn off the ringtone volume by mistake and miss some phone calls.
Is it possible to have ONLY the "Systeme Volume" and not the ringtone volume anymore.
Thanks in advance

or at least have the volume rocker to change by default the system volume ?

lpaso said:
or at least have the volume rocker to change by default the system volume ?
Click to expand...
Click to collapse
Yes, try this registry tweak
HKLM/Software/HTC/VolumeOverlay/DefaultPage
0=System
1=Ringtone
Don't remenber if a SR is mandatory...just try.

zen_green said:
Yes, try this registry tweak
Don't remenber if a SR is mandatory...just try.
Click to expand...
Click to collapse
SR seems to be necessary.
Thanks for the tweak!

[Q] With Earphones Music Volume to low on WP7

ok...Installed WP7 + Magldr 1.12 and works perfect. Very Loudest Ringtone and Systemtone without Earphone.
Activate works perfect. Thx Microsoft German Support!
But i want use my InEarphones and listen Music and now its to low...!
I found the Registry Entrys but how make the Volume for Music higher? What is the right Entry for this? Anybody helps?
I need music music volume higher...
Thx DarkForcesTeam for this work...

It's completed mess with volumes.
1) Media & ring volume are too LOUD
2) System notifications with same level like 1) are too LOW

Just use the rocker switches to adjust volume level

stephandelaat said:
Just use the rocker switches to adjust volume level
Click to expand...
Click to collapse
What is this?

stephandelaat said:
Just use the rocker switches to adjust volume level
Click to expand...
Click to collapse
Whut?
Rocker Switches?

Wrong forum, ffs why are people still posting crap in the dev sections??
Thread reported!

Mine is stupidly loud on ringtones and media etc (to distortion), and it's also too loud through headphones.
When I say this I mean that the loudest setting is over the top and not much use since it's distorted - that's fine, I just won't turn it up that high - simples!
But the problem is that on the lowest setting (1/20) both ringtones and media are still too loud for what should be kind of barely audible. Now that is not easy to workaround so I'd love to sort it out.

Update - got my excessive volume fixed now with the registry edit posted elsewhere by changing the value from 45 to 70.
Now volume level 1 is really quiet how it should be.

Cret said:
Update - got my excessive volume fixed now with the registry edit posted elsewhere by changing the value from 45 to 70.
Now volume level 1 is really quiet how it should be.
Click to expand...
Click to collapse
If you happen to find that thread again please post it here as I would really appreciate it.
Kenichi

i did the registry edit too but speakers sound awful still when i want to turn it up a bit to listen to music or videos.... very annoying

Cret said:
Update - got my excessive volume fixed now with the registry edit posted elsewhere by changing the value from 45 to 70.
Now volume level 1 is really quiet how it should be.
Click to expand...
Click to collapse
+1 - please share your findings (where is this reg key, what variable?)
edit:
I found the variable he's talking about.
[HKEY_CURRENT_USER\ControlPanel\Volume]
"MaxdBAtten"=dword:2D (2D = 45)
I suspect this will not change the ringtone to notification volume differences?

Heimiko said:
+1 - please share your findings (where is this reg key, what variable?)
edit:
I found the variable he's talking about.
[HKEY_CURRENT_USER\ControlPanel\Volume]
"MaxdBAtten"=dword:2D (2D = 45)
I suspect this will not change the ringtone to notification volume differences?
Click to expand...
Click to collapse
any way of entering this in the phone ?
as a regeditor or something ?

Confirm this works a treat, here is the reg editor

THUDUK said:
Confirm this works a treat, here is the reg editor
Click to expand...
Click to collapse
can you confirm the volume difference between ringtone and notifications is still there? or does this also solve that as well?

Heimiko said:
can you confirm the volume difference between ringtone and notifications is still there? or does this also solve that as well?
Click to expand...
Click to collapse
I think I just fixed this. I saw a registry edit for WM 6 & it the directory still exists.
HKCU\ControlPanel\SoundCategories\
In each of it's sub directories, change the InitVol value to 100. I notice some were 100 already while others were 85 or even 65. I think this means 100% volume/85% volume/65% volume. Change them all to one value & you'll equalize the volume across the board.

Galaxy S2 "Increase the microphone for incoming calls and outgoing

Galaxy S2 "Increase the microphone for incoming calls and outgoing" (excuse me for the translation but i m italian).
settings:
Enter the numeric keypad of the phone the following command: * # * # 197328640 #*#*, A screen with the following items:
Service Mode
Click on the item
[5], then click AUDIO
[1] NB (Voice Call)
[3] and then on SPEAKER VOLUME
Enter the following values :
SPEAKER:
[1] SRC Speech RX Volume I put:
* Lvl 4: 95
* Lvl 5: 100
[4] DST TX Speech Volume I put: 98
TO ENTER THE VALUES ON PLUG VOICE YOU WANT CHANGE, BY CLICKING THE SOFT LEFT THAT IS ON THE DISPLAY AND THEN CLICK ON KEY INPUT.
AFTER ENTERING VALUES, RETURN BACK MORE 'TIMES TO RETURN TO THE VOICE HANDSET!
THE SAME APPLIES ARE FOR HANDSET AND HEADSET!
HANDSET:
[1] SRC Speech RX Volume I put:
Lvl 4: 90
Lvl 5: 100
HEADSET:
[1] SRC Speech RX Volume I put:
Lvl 4: 90
Lvl 5: 100
CLICK ON SOFT LEFT BUTTON THAT IS ON THE PHYSICAL AND PRESS "AND".
IN THIS WAY WE HAVE SAVED PERMANENTLY SETTING THE AUDIO CALL!
With these settings will have an increased audio for incoming calls and outgoing!
The values could increase beyond those I mentioned but it could distort the audio!
Make a test x to see your opinion what are the best settings if you want!
Note: each time you reboot the terminal the following settings are lost!
Find a way to save these settings in your rom and keep them permanently without losing on every reboot.

I have been searching for a solution to these settings being reset after boot for awhile now. Has anyone got a clue as to where these settings are modded? I think that the servicemode.apk saves the settings in a file somewhere???
Maybe values in?
/data/soundbooster.txt
/data/stream_earpeiece.txt
/data/stream_headset.txt
/data/stream_bluetooth.txt
Anywho, I hope someone knows how to make these setting changes permanent.

Thanks, I will test these out.

good. Im doing know

Now it would be cool if someone was able to put this into a simple app so that settings can be changed from a UI (perhaps with presets such as 'High', 'Medium', 'Low').

amuneer said:
Now it would be cool if someone was able to put this into a simple app so that settings can be changed from a UI (perhaps with presets such as 'High', 'Medium', 'Low').
Click to expand...
Click to collapse
that really sound great i wish for this also

Thanks.....

Looking forward to a permanent solution for this

Gonna try these settings out. Thanks!

thank you fosseperme,
this is great info and i also agree that somebody should do apk for this (i wish i could )

It would be great to have this fix implemented automatically maybe a small app or some sort of auto execute script on boot?

this increase the volume you hear or the volume the other party hear?

Isnt Tx responsible for transmit and Rx for receive, in this case only heard volume is louder on our end right?
Can anyone else confirm and test if this is working ?

Non e stato risolto il problema del riavvio?
Inviato da Galaxy S II from Italy

Still no fix. For onlookers - save your time and money, just buy a phone that isn't buggy in such a critical area. This problem plagues all sgs2 users.

Madmax what problem it plaques you doesn't mean it does everyone. My sgs2 is plenty loud enough.
Sent from my GT-I9100 using xda premium

what problem it plaques you doesn't mean it does everyone. My sgs2 is plenty loud enough
Click to expand...
Click to collapse
yes , But ... there are many situations and places where we all can use a little boost in volume , especially outdoors where public activity is loud .
i'm another voter for an app for this

On my XWKI4 stock no brand tapping menu (5)audio it says : CAUTION!! Menu being blocked.....why?
Please help me

saso75 said:
On my XWKI4 stock no brand tapping menu (5)audio it says : CAUTION!! Menu being blocked.....why?
Please help me
Click to expand...
Click to collapse
Come on everyone. I am having the same problem. Surely someone knows how to get around this problem.

Where can i enter this code? (I am using a Huawei Y625)

how to increase volume to maximim via root

hi brothers
how to increase volume loadspeaker to maximum ?
i found a solution for j700h by changing mixer_path in system/etc with another mixer_path
can i use it in my grand2? or a solution?
i use motion rom 16.6
thx

I adjust mixer_path.xml by change value of speaker to 95.

powerp said:
I adjust mixer_path.xml by change value of speaker to 95.
Click to expand...
Click to collapse
can u tell me exactly where should i change value
coz there is RXr digital volume
SPK DRV volume
compo switch
if u can with screen shot
thx