Hey everyone. I have installed multiple custom ROMS on my phone including unofficial temasek and xperia cm 12.1 razor ROM and all of them end up with an exclamation point next to my cellular signal. Stock I have to issues with only custom ROMs. I made sure AT&T APN was correct and the preferred network was LTE. I know I have LTE signal because if I install stock it works fine. Any suggestions?
have you tried manually registering on att lte through cellular network setting?
No LTE after remote support from Oneplus Team
Guys,
I am new to this forum, so pardon if I made any mistake in posting.
Well, I have recently undergone a remote support session from oneplus team, during which I they have flashed my device with an special software (it was done to address broken fingerprint sensor repair). But unluckily I ended up with no LTE on my phone.
I was using same phone with network provide in the same area on LTE prior to that session, but later on my device no more work on LTE. Kindly help me resolving this issue.
I have tried putting my SIM in other phone, LTE works there, (other phone is Oneplus X, and in same area).
I have tried putting in other sim of same network but still no luck.
I have tried putting in a different network sim card in my phone and it works on LTE.
My understanding is, the the current ROM has locked the band which I was using earlier for LTE. Kindly advise.
Hi all,
I own a SM-A500M phone. The phone has unlocked stock rom (original rom is not modified by carrier) and updated trough OTA to android 5.0.2. I know 4g does work in my phone because I could use it with my prior carrier, but I recently changed to CLARO and with this new provider I don't have 4g acces, only H+ and it is really slow and laggy connection.
I know the following:
1) Sim card is a compatible 4g nano sim
2) The carrier CLARO has 4g coverage where I live
3) The phone is not the problem
4) I have tried all the usual FAQS (APN's, select LTE in config, reboot) with no success.
5) The phone's variant is right (latinoamerican brand), so It can't be due to frequencies or bands problems.
I asked for help in CLARO and told me that this has happened amongst users with unlocked phones (that is, rom not modified with CLARO's bloatware), and the solution is to flash CLARO's rom. But the problem with this solution is that CLARO hasn't released android 5.0.2 update (and I think it will never update) and I really like android 5 and wouldn't want to return to 4.4.
So, is it true? Is there a chance to fix this problem with minor tweaks? What is the problem here?
Since I recently acquired this phone, I would prefer not lossing warranty, so rooting and custom roms might not be an option.
Thanks in advance. Kind regards!
You could try to flash their rom and check if it works. Then you can be 100% sure that hardware/chip/network provider are fine. I have the same phone on since last week, but still did not go to get the chip at a movistar office. Maybe you need to activate the chip and they refuse to do it unless you get their rom. Maybe just getting their rom, and then flashing back the updated stock one or a CM or whatev would be enough.
Four things to note before proceeding...
1. This only works for users having vs985 model outside the US or not on verizon network.
2. I'm beginner im not responsible for any harm to your phone , I'm just sharing what i did to attain 4g services.
3. May be you already know all the things in the post but it can be useful for beginners like me .
4. Sorry for the english as its not my native language.
So Hi guys i installed this rom and as usually i was not getting any 4G or lte network.
Then i go to my network provider's website to check on which Band or frequency 4g services are active. ( for this i just googled 'idea 4g band' and i am redirected to my network provider's website. Here 'idea' is the name of network provider.)
So i found that in my region 4g services are active on Band3
Different careers use different Bands to provide 4g services such as band40 , band17 etc
Then i go to phone's hidden menu by the Advanced Menu of Fulmics Tweaks.
In hidden menu i select Modem Protocol > LTE Band Selection
There i select Band3 but i got "Fail' message on screen , however when i select band4 it gave me a 'success' message.
It means on my phone band4 is active but not band3.
All this information of Bands are stored in Modem or Bootstack section of our phone.
May be fulmics rom is having a band concerned with international rom So now i need a modem on which Band3 can be activated by going to hidden menu.
So i just flashed 35b Bootstack compiled by @xdabbeb.
Which can be found in this thread http://forum.xda-developers.com/verizon-lg-g3/development/xdabbeb-s-vs980-2-0-0-t3231279
After flashing when i tried to select band3 in hidden menu it gave a 'success' message . It means Band3 is activated on my phone. And now when i searched for all networks in Networks Menu of Phone Setting. I got my network listed and i successfully registered on it. And got 4G NETWORK.
So first of all you should know on which band your network is working and then try flashing different bootstacks on which your 4g Band can be activated.
Flashing wrong Bootstack can brick your phone
""Do not flash any bootstack above 35b. Custom roms are still not compatible with bootstacks above 35b""
You can try 24b , 12b. (But im sure only about 35b as i tried only this)
Again I'm not responsible for any harm to your phone. Use your mind and search thoroughly before taking any step.
akki7636 said:
Three things to note before proceeding...
1. I'm beginner im not responsible for any harm to your phone , I'm just sharing what i did to attain 4g services.
2. May be you already know all the things in the post but it can be useful for beginners like me .
3. Sorry for the english as its not my native language.
So Hi guys i installed this rom and as usually i was not getting any 4G or lte network.
Then i go to my network provider's website to check on which Band or frequency 4g services are active. ( for this i just googled 'idea 4g band' and i am redirected to my network provider's website. Here 'idea' is the name of network provider.)
So i found that in my region 4g services are active on Band3
Different careers use different Bands to provide 4g services such as band40 , band17 etc
Then i go to phone's hidden menu by the Advanced Menu of Fulmics Tweaks.
In hidden menu i select Modem Protocol > LTE Band Selection
There i select Band3 but i got "Fail' message on screen , however when i select band4 it gave me a 'success' message.
It means on my phone band4 is active but not band3.
All this information of Bands are stored in Modem or Bootstack section of our phone.
May be fulmics rom is having a band concerned with international rom So now i need a modem on which Band3 can be activated by going to hidden menu.
So i just flashed 35b Bootstack compiled by @xdabbeb.
Which can be found in this thread http://forum.xda-developers.com/verizon-lg-g3/development/xdabbeb-s-vs980-2-0-0-t3231279
After flashing when i tried to select band3 in hidden menu it gave a 'success' message . It means Band3 is activated on my phone. And now when i searched for all networks in Networks Menu of Phone Setting. I got my network listed and i successfully registered on it. And got 4G NETWORK.
So first of all you should know on which band your network is working and then try flashing different bootstacks on which your 4g Band can be activated.
Flashing wrong Bootstack can brick your phone
""Do not flash any bootstack above 35b. Custom roms are still not compatible with bootstacks above 35b""
You can try 24b , 12b. (But im sure only about 35b as i tried only this)
Again I'm not responsible for any harm to your phone. Use your mind and search thoroughly before taking any step.
Click to expand...
Click to collapse
Hi there, thanks for the info. What area are you in and where did you find what band you needed? I have tried numerous times with all the bootstacks and never had consistent 4G.
@mopartonyg
I'm in India and i just checked my career's website to know which band they are using. However in USA Verizon wireless uses Band12 as Primary Band and Band2 , Band4 as Secondary band to strengthen the signal in densely populated urban area. So if you are verizon user in USA band 12,4,2 must be activated. I can't say anything about consistency as it varies from place to place.
Actually Verizon uses band 13 for it's primary along with bands 4 and 2. Not having any luck getting data to work on Fulmics with this method. I select band 13 and band 4 (as band 2 is not in my area) yet even with that I still can't get data at all on Verizon with Fulmics.
same boat here... actually the only band I can get working is 4. I have to assume the design of the international rom with the band they are designed around, just don't play nice with our CDMA harware/modem partition. I would suspect that the international roms would require some engineering for them to really work properly. not sure if just porting them over and chaning settings is going to get the job done. perhaps someone more intelligent than I could share some light, but there certainly is a conflict with how these roms communicates across the CDMA bands in the US
Sent from my VS985 4G using XDA-Developers mobile app
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
akki7636 said:
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
Click to expand...
Click to collapse
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
SignatureBoy said:
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
Click to expand...
Click to collapse
Oh... Glad to hear that buddy..
So i think my post is useful for only international users which are not on verizon wireless.
akki7636 said:
@b00ster23@AngryManMLS
One thing i noticed here... that only Verizon sim users are facing problem regarding 4G whereas other international users like me ( and some of my friends in China are free to select any network ). So may be verizon is creating restrictions as when i was on Stock vs985 verizon Rom ( unrooted) , i was not getting any official ota updates. It always says your software is up to date. But then i found a statement in Verizon's website that you will not get any official updates if you are not having verizon sim.
So verizon knows what Rom and what sim we are using.
Sry 4 english
Click to expand...
Click to collapse
A couple of good approaches to the issue. Although it needs to be noted 4G is directly related to the band on each carrier (VZW, TMO, etc) See Below
Carrier 4G LTE Bands Frequencies
Verizon Wireless 2, 4, 13 1900, 1700 f, 700 c
T-Mobile 2, 4, 12 1900, 1700 def, 700 a
Sprint 25, 26, 41 1900 g, 850, 2500
Europe 3, 7, 20 1800, 2600, 800
If a specific ROM cannot be set to the correct bands above, it would make sense to me that Verizon wouldn't work in Europe on a stock VZW ROM. It would not be able to use the channels in Europe.
And vice versa, that Verizon wouldn't work in the states on an international ROM in the US. Whether the Verizon SIM is blocking that band, or the design of the ROM, would be a better question for the developers.
SignatureBoy said:
I agree with this statement even i am getting 4G with Warid Telecom here in Pakistan.
Click to expand...
Click to collapse
Warid's approved devices will definitely work with Warid's LTE network. For our "Warid LTE Approved' devices please visit the "Warid's LTE devices" section. You can also purchase LTE devices that support 1800 MHz (FDD-LTE Bands 3) from other sources. However, Warid doesn't take responsibility for these devices if they do not work on Warid's LTE network http://www.waridtel.com/lte/faqs
So it makes sense that if BAND 3 works international (see above) that you get 4G
The one thing I noticed after activating bands 13 and 4 (with the proper VS985 35B bootstack) in the hidden settings is when I searched for my network under network settings it does bring up Verizon but it fails authentication. So it's like there is something missing in Fulmics ROM itself that would get it to where the ROM will work with Verizon's network. So is it a matter of lifting whatever files from say 47A/47B into Fulmics that have the Verizon VS985 specific info to get it to work perhaps?
AngryManMLS said:
The one thing I noticed after activating bands 13 and 4 (with the proper VS985 35B bootstack) in the hidden settings is when I searched for my network under network settings it does bring up Verizon but it fails authentication. So it's like there is something missing in Fulmics ROM itself that would get it to where the ROM will work with Verizon's network. So is it a matter of lifting whatever files from say 47A/47B into Fulmics that have the Verizon VS985 specific info to get it to work perhaps?
Click to expand...
Click to collapse
I think now its not a matter of bootstack. Because even when Required Band is activated we can't register to the Verizon. Xpirt mentioned in a post that he is working to resolve network issues in Verizon models. We can hope that this problem will be solved in next version However xdabbeb shared that the 47A modem won't work without the corresponding 47A secondary bootloader (sbl1). Unfortunately, the 47A sbl1 doesn't play nice with the last bump-exploitable Android bootloader (aboot) we have from 12b. If you use that pairing, you'll put your device into 9008 bulk mode(Hard brick).
akki7636 said:
I think now its not a matter of bootstack. Because even when Required Band is activated we can't register to the Verizon. Xpirt mentioned in a post that he is working to resolve network issues in Verizon models. We can hope that this problem will be solved in next version However xdabbeb shared that the 47A modem won't work without the corresponding 47A secondary bootloader (sbl1). Unfortunately, the 47A sbl1 doesn't play nice with the last bump-exploitable Android bootloader (aboot) we have from 12b. If you use that pairing, you'll put your device into 9008 bulk mode(Hard brick).
Click to expand...
Click to collapse
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
AngryManMLS said:
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
Click to expand...
Click to collapse
+1
AngryManMLS said:
The good news is we do have 47A ROMs that are using the 35B modem so there is potential that Xpirt could use that as a source for a fix with the authentication issue. So @xpirt if you need anyone to beta test fixes my VS985 is ready to help!
Click to expand...
Click to collapse
This is good to hear and I second that!
Looking forward to getting it fixed and use it as my daily driver. It would totally be worth a big donation, thanks to everyone working on making this available to so many.
Great discussion towards the development of the International ROM's for our VS985. I was able to get 4G with Andy's 30A ported ROM...although the signal bars never came up on my phone, I was able to get the 4G speeds. I noticed that the APN XML was filled with Chinese... So for whatever reason and way, my phone was able to grab "somebody's" 4G tower. I'm hoping the RIL (Radio Interface Layer) and libraries were pulled over and perhaps this could provide some more insight to @Xspirit
b00ster23 said:
Great discussion towards the development of the International ROM's for our VS985. I was able to get 4G with Andy's 30A ported ROM...although the signal bars never came up on my phone, I was able to get the 4G speeds. I noticed that the APN XML was filled with Chinese... So for whatever reason and way, my phone was able to grab "somebody's" 4G tower. I'm hoping the RIL (Radio Interface Layer) and libraries were pulled over and perhaps this could provide some more insight to @Xspirit
Click to expand...
Click to collapse
Cool buddy... I think our vs985 will be on 4g Speed very soon.
akki7636 said:
Cool buddy... I think our vs985 will be on 4g Speed very soon.
Click to expand...
Click to collapse
I am on BlackSoulxxx latest LG G3 Tekcafe v5.3 D85530A-Full G5 ROM. Here's what I did to get the bars with 4g data. I tested it out in areas where there is no cell service and in areas where there is 1x or 3g and the 4g came back. I even made a backup of the ROM wiped and installed another marshmallow aosp rom and others. I then went to restore BlackSoulxxx ROM and 4g signal still came back.
Steps I did.
1. Tot'd back to stock 10b and rooted and installed twrp.
2. Flashed LG_G3_Flash2BackupEFS.zip of the 10b rom.
3. Wiped stock 10b and flashed the 10b G3_EFS_Flashable_Restore.zip that was created from the the LG_G3_Flash2BackupEFS.zip.
4. Flashed BlackSoulxxx rom and after it booted up I had signals but not data until I entered the Verizon APN manually see picture of what to enter. If mobile network is greyed out flash 35b bootstack.
5. I entered the verizon APN and selected CDMA then global I got the 4g icon with signal bars I changed the icon with a buildprop edit.
I just don't get signals while in 1x or 3g but data does work still and it will get 4g again if your in a 4g area. The phone does say T-CDMA 64. Here's a https://drive.google.com/file/d/0B-EyVOQK1xDAa0VmbERXcUlrV1U/view?usp=sharing to change it to Verizon Wireless courtesy of @xpirt.
netookska05 said:
I am on BlackSoulxxx latest LG G3 Tekcafe v5.3 D85530A-Full G5 ROM. Here's what I did to get the bars with 4g data. I tested it out in areas where there is no cell service and in areas where there is 1x or 3g and the 4g came back. I even made a backup of the ROM wiped and installed another marshmallow aosp rom and others. I then went to restore BlackSoulxxx ROM and 4g signal still came back.
Steps I did.
1. Tot'd back to stock 12b and rooted and installed twrp.
2. Flashed LG_G3_Flash2BackupEFS.zip of the 12b rom.
3. Wiped stock 12b and flashed the 12b G3_EFS_Flashable_Restore.zip that was created from the the LG_G3_Flash2BackupEFS.zip.
4. Flashed BlackSoulxxx rom and after it booted up I had signals but not data until I entered the Verizon APN manually see picture of what to enter. If mobile network is greyed out flash 35b bootstack.
5. I entered the verizon APN and selected CDMA then global I got the 4g icon with signal bars I changed the icon with a buildprop edit.
I just don't get signals while in 1x or 3g but data does work still and it will get 4g again if your in a 4g area. The phone does say T-CDMA 64. Here's a https://drive.google.com/file/d/0B-EyVOQK1xDAa0VmbERXcUlrV1U/view?usp=sharing to change it to Verizon Wireless courtesy of @xpirt.
Click to expand...
Click to collapse
Great job posting your step by step instructions. I've been able to achieve all of the same on a host of international ROMS however with a couple of caveots. I can either have SMS/MMS working properly, or break SMS/MMS and have internet with signal bars. Question about the file above. This will just modify the header, or will it specifically put you on the Verizon network?
Sent from my VS985 4G using XDA-Developers mobile app
b00ster23 said:
Great job posting your step by step instructions. I've been able to achieve all of the same on a host of international ROMS however with a couple of caveots. I can either have SMS/MMS working properly, or break SMS/MMS and have internet with signal bars. Question about the file above. This will just modify the header, or will it specifically put you on the Verizon network?
Sent from my VS985 4G using XDA-Developers mobile app
Click to expand...
Click to collapse
It'll change just the ROM from saying T-CDMA 64 to Verizon Wireless for Verizon users (VS985).
netookska05 said:
It'll change just the ROM from saying T-CDMA 64 to Verizon Wireless for Verizon users (VS985).
Click to expand...
Click to collapse
So when you go into the About Phone>Network, does it say Verizon Wireless for the network?
Hi everyone,
After switching from the Dutch provider KPN to Vodafone I lost the ability to connect to LTE/4G networks. On KPN in both Stock and RR remix LTE was working perfectly without any problems.
What can be the problem? My first thought is that Vodafone is using different bands than KPN, witch are not supported by the Axon 7. But all the Vodafone bands should be supported.
Is there a frequency band or channel that is somehow blocked a custom rom? Also my device is listed as a A2017U instead of a A2017G, is this an issue? Looking on this forum it seems not really of an issue. I flashed the right Modem in TWRP before installing the ROM.
Is there anyone that knows how to fix this issue?
Hey Maxhuisman,
A few months ago i switched from stock 6.0.1 MM rom to RR Nougat and after that Darkrom and a few others. No matter which kind of bootloaders/bootstacks/modems i flashed, the 4G/LTE data service from Vodafone NL just did not work even even after making sure the right LTE bands were enabled in the free app Network Guru. After asking for advise in a few other treads i was told to go back to a stock or near stock rom.
I am currently on Sl1m's B08 Nougat rom where my 4G+ worked instantly after flashing. I am not going to try other roms for now until i'm 100% sure that vodafone LTE works on those roms.
cioeneskens said:
Hey Maxhuisman,
A few months ago i switched from stock 6.0.1 MM rom to RR Nougat and after that Darkrom and a few others. No matter which kind of bootloaders/bootstacks/modems i flashed, the 4G/LTE data service from Vodafone NL just did not work even even after making sure the right LTE bands were enabled in the free app Network Guru. After asking for advise in a few other treads i was told to go back to a stock or near stock rom.
I am currently on Sl1m's B08 Nougat rom where my 4G+ worked instantly after flashing. I am not going to try other roms for now until i'm 100% sure that vodafone LTE works on those roms.
Click to expand...
Click to collapse
Really? That's too bad to hear
Thanks for your reply, I guess I have to go back to stock or to Sl!m then. Very strange that it is not working with Vodafone.
Hello. I have unlocked Verizon V20 VS995 and I am in Europe. In the urban areas phone works fine with all frequencies, also 4G B3 and B20 frequency, but when I go just outside town it looses network. Any sugestions?
CDMA LGV20 will suffer with those issues in Europe. So just switching to a native LTE/GSM device is the only way...
But I can't understand why the sognal is so weak when phone supports all the frequencies in my country. I even changed antennas (plastic bumpers) but still the same result.
Simple explanation - it is not a HW issue - the root cause is combination of your modem firmware and stock ROM you are using as the LTE/GSM band usage is set to be with lower priority and the modem constantly searches for the CDMA signal firstly...
So, is there anything to fix this? Maybe flash another rom or modem, if I find somehow to root stock Oreo.
If you are in VS995 really (and please check the sticker indication under your battery for that it should state VS995 only without Sat the end) you can roll back to Nougat via kdz flash and unlock the bootloader via DirtySanta, flash custom recovery and flash afterwards AOSP/LOS based roms.
I think I have VS995 because before ota upgrade to Oreo I have installed few KDZ's from the link without any problem. Can you tell me how can I check ARB version of Oreo?
All Verizon ROMS including Oreo are ARB00
Also you might try flashing Oreo Alpha Omega Hybrid ROM firstly and if not happy than try RR roms...
Tried Alpha Omega ans Lineage 15.1 and the situation is the same. Poor signal strenght.
scytalemk said:
Tried Alpha Omega ans Lineage 15.1 and the situation is the same. Poor signal strenght.
Click to expand...
Click to collapse
Hi, did you find an answer? I have same problem... shame, lovely phone...
try use it without phone covers... it will get more bars lol