Hello friends,
I've noticed that a lot of the PE3 ROMS are all TouchWiz based. Because of this, I'd like to revert back to DOK2 and install resurrection remix or even CM 12.1. However, when flashing the BL and CP DOK2 to my device via Odin I get the error below. My device is an SM-910T Note 4 T-Mobile.
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1101)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Get PIT for mapping..
<ID:0/015> Firmware update start..
<ID:0/015> SingleDownload.
<ID:0/015> aboot.mbn
<ID:0/015> NAND Write Start!!
<ID:0/015> NON-HLOS.bin
<ID:0/015> FAIL! (Auth)
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/015> Removed!!
Thanks!
Related
Hello,
So my brother's Galaxy S4 appeared the recieve the BSOD on his Galaxy S4 i9505. His screen was acting all wierd with colors and died on him. I've googled around and found out that flashing it to the 'I9505XXUDMHB_I9505PHNDMHB_I9505XXUDMHB_HOME.tar.md5' could fix it. The phone hasn't been rootted or flashed.
Now i do have a litle experience with flashing a phone and got all the files: Odin, USB drivers & an stock rom. But Odin keeps giving me the same auth error and i have really no clue what i can do to fix this. The message is this:
Code:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl2.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl3.mbn
<ID:0/007> rpm.mbn
<ID:0/007> aboot.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
I've tried several versions of Odin, several USB ports and 2 different micro usb cabels. I've bought an JIG to be sure it enters the download mode and tried the button combination to launch it in download mode. But i keep getting this same fail message.
Does anyone knows how to fix this or can i just send the phone to Samsung for an RMA?
Thanks,
Thomas
What android version is the phone? 4.3? maybe the file you downloaded was 4.2(.2) version and you cant downgrade so you need to find a 4.3 version one I hope this helped you
KingOfDope said:
What android version is the phone? 4.3? maybe the file you downloaded was 4.2(.2) version and you cant downgrade so you need to find a 4.3 version one I hope this helped you
Click to expand...
Click to collapse
Thank you for your reaction. This does indeed explains it to me, i've been told at the phonestore i've been to that it has to do with an error in 4.3 and the only change to fix it was to downgrade it. Looks like i've to contact Samsung then.
guppie11 said:
Thank you for your reaction. This does indeed explains it to me, i've been told at the phonestore i've been to that it has to do with an error in 4.3 and the only change to fix it was to downgrade it. Looks like i've to contact Samsung then.
Click to expand...
Click to collapse
unfortunately yes you have to contact Samsung
i'm having a weird glitch in odin and i can't figure it out.
My log is
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl2.mbn
<ID:0/004> sbl3.mbn
<ID:0/004> rpm.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What firmware version are you trying to flash and what firmware version is the device currently on?
Sent from my Nexus 9 using XDA Free mobile app
The fail auth indicates that you are flashing a firmware with the bootloader at a lower version than the one on the phone. The bootloader just CANNOT be downgraded.
as jmjoyas mentioned, you cannot downgrade your phone, with (it appears to be so) the exception of a few versions. Several updates make a hardware change to the device by blowing qfuses.
I trying to install a custom recovery on my note 3.
Litteraly tried all odin versions, they all start the flash, then end up failed. (see below)
I tried it on 2 PCs, tried heimdall as well. Heimdall stops with a PIT failed to flash error.
I'm on 4.4.2
Are the any known issues that I couldn't find? Or it's something wrong with the phone?
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cache.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try the TWRP app in play store.
gabriellehr said:
I trying to install a custom recovery on my note 3.
Litteraly tried all odin versions, they all start the flash, then end up failed. (see below)
I tried it on 2 PCs, tried heimdall as well. Heimdall stops with a PIT failed to flash error.
I'm on 4.4.2
Are the any known issues that I couldn't find? Or it's something wrong with the phone?
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cache.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Reactivation lock maybe?
<ID:0/013> Added!!
<ID:0/013> Odin engine v(ID:3.1100)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> aboot.mbn
<ID:0/013> NAND Write Start!!
<ID:0/013> FAIL! (Auth)
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/013> Removed!!
Error for display -- Fused 2>binary 1
jaanaka said:
<ID:0/013> Added!!
<ID:0/013> Odin engine v(ID:3.1100)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Set PIT file..
<ID:0/013> DO NOT TURN OFF TARGET!!
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> SingleDownload.
<ID:0/013> aboot.mbn
<ID:0/013> NAND Write Start!!
<ID:0/013> FAIL! (Auth)
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/013> Removed!!
Error for display -- Fused 2>binary 1
Click to expand...
Click to collapse
That happen to me once , and i resolved it by using old ODIN version , that's works for me.
Try to use older ODIN version.
You can't downgrade.
hello.i have been trying to flash stock rom with odin but it always gives me a Fail message
the log is :
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
how can i make it work
https://www.youtube.com/watch?v=0hIYSO3a3yc