Database Users

Stock on samsumg logo.

I try to fix that on smart switch, after i insert the model and s/n. He show me "does not support initializing"
what should i need to do? Tnx!

It depends on what caused the problem...
In most situations its enough to flash correct firmware in Odin (you won't lose any personal data). If this doesn't solve your problem, then you should make factory reset in recovery mode.
Wysłane z mojego SM-N910C przy użyciu Tapatalka

Shreqg2 said:
It depends on what caused the problem...
In most situations its enough to flash correct firmware in Odin (you won't lose any personal data). If this doesn't solve your problem, then you should make factory reset in recovery mode.
Wysłane z mojego SM-N910C przy użyciu Tapatalka
Click to expand...
Click to collapse
ok.
how i know what is me correct firmware that i nedded?
tnx alot!

First of all you have to know your device model and CSC.
Model should be something like SM-N910C/F/H etc. It is written in download mode or under battery.
CSC you can find in recovery mode. It will be written on the bottom of the screen (for example: XEO/XEH/...).
Then go to www.sammobile.com and under FIRMWARE section put that informations. Choose the newest software from the list and flash it with Odin.
Wysłane z mojego SM-N910C przy użyciu Tapatalka

Shreqg2 said:
First of all you have to know your device model and CSC.
Model should be something like SM-N910C/F/H etc. It is written in download mode or under battery.
CSC you can find in recovery mode. It will be written on the bottom of the screen (for example: XEO/XEH/...).
Then go to and under FIRMWARE section put that informations. Choose the newest software from the list and flash it with Odin.
Wysłane z mojego SM-N910C przy użyciu Tapatalka
Click to expand...
Click to collapse
ok. so in recovery mode in the bottom of the screen he write to me:" dm-verity verification failed..."
tnx again :good:

Ok, so this is a problem with system on the phone. Good to know.
Tell me what model it is and from which country. Is it from any mobile operator or you bought it in store?
Wysłane z mojego SM-N910C przy użyciu Tapatalka

Shreqg2 said:
Ok, so this is a problem with system on the phone. Good to know.
Tell me what model it is and from which country. Is it from any mobile operator or you bought it in store?
Wysłane z mojego SM-N910C przy użyciu Tapatalka
Click to expand...
Click to collapse
ssn:n910cgsmh.
SM-N910C.
USA.
bought it in store.
THANK YOU VERY MUCH ON HELPING WITH THAT!

No problem.
It is hard for me to say which exactly CSC code you have, so what can I suggest is to install this XEO 5.0.1 firmware - http://www.sammobile.com/firmwares/download/47802/N910CXXU1BOE3_N910COXA1BOE3_XEO/ .
Probably it isn't your country code and it will couse some "force close" errors after boot. If so, go to recovery mode again and check correct CSC code. You will not see "dm-verity verification failed" error anymore as soon as you won't try to root or something like that. After checking correct CSC you can finally get correct firmware file and bring your device back to normal life.
Wysłane z mojego SM-N910C przy użyciu Tapatalka

Shreqg2 said:
No problem.
It is hard for me to say which exactly CSC code you have, so what can I suggest is to install this XEO 5.0.1 firmware - http://www.sammobile.com/firmwares/download/47802/N910CXXU1BOE3_N910COXA1BOE3_XEO/ .
Probably it isn't your country code and it will couse some "force close" errors after boot. If so, go to recovery mode again and check correct CSC code. You will not see "dm-verity verification failed" error anymore as soon as you won't try to root or something like that. After checking correct CSC you can finally get correct firmware file and bring your device back to normal life.
Wysłane z mojego SM-N910C przy użyciu Tapatalka
Click to expand...
Click to collapse
OK SO NOW I GET CSC CODE: SER.
I search on the website that you give me, but i cannot find that.

while you are at it, mid telling me where or what coutry my note 4 is
In recovery mode it says LRx22C.N910FXXU1BOC5
and csc is PAN..
I just got my phone, on the box it says mytelenor, and it has some apps, now i dont know, if its hungary, sweeded, norwey, bc it's some kind of language like theirs.. and if there is like any debloated unbranded firmware i can flash, like german one? that will get the 5.1.1. sooner?..
Thanks a lot if you help me, thanks even if you dont
Edit, oh ok, figured the csc out.. simple.. now just the question, if i can flash unbranded let's say german one, or the poland, if it has 5.1.1.?cheers

hag911 said:
OK SO NOW I GET CSC CODE: SER.
I search on the website that you give me, but i cannot find that.
Click to expand...
Click to collapse
It seems that your phone has Russian product code (SER).
Here is the newest firmware for this CSC:
http://www.sammobile.com/firmwares/download/49812/N910CXXU1BOE1_N910COXE1BOF1_SER/
Wysłane z mojego SM-N910C przy użyciu Tapatalka
---------- Post added at 07:27 AM ---------- Previous post was at 07:19 AM ----------
thejunkie said:
Edit, oh ok, figured the csc out.. simple.. now just the question, if i can flash unbranded let's say german one, or the poland, if it has 5.1.1.?cheers
Click to expand...
Click to collapse
Sure you can. But you have to chose correct firmware for your model. There is no XEO variant of N910F so you can only flash German one when 5.1.1 (or any other) is out. In most situations it will work fine without wipe, but if you want to get DBT OTA's in the future, you have to do factory reset.
Wysłane z mojego SM-N910C przy użyciu Tapatalka

Shreqg2 said:
It seems that your phone has Russian product code (SER).
Here is the newest firmware for this CSC:
http://www.sammobile.com/firmwares/download/49812/N910CXXU1BOE1_N910COXE1BOF1_SER/
Wysłane z mojego SM-N910C przy użyciu Tapatalka
---------- Post added at 07:27 AM ---------- Previous post was at 07:19 AM ----------
Sure you can. But you have to chose correct firmware for your model. There is no XEO variant of N910F so you can only flash German one when 5.1.1 (or any other) is out. In most situations it will work fine without wipe, but if you want to get DBT OTA's in the future, you have to do factory reset.
Wysłane z mojego SM-N910C przy użyciu Tapatalka
Click to expand...
Click to collapse
sorry noobo here, how do i know which firmware is the correct one :/

Check it here:
http://www.sammobile.com/firmwares/database/SM-N910F/DBT/
When Samsung release 5.1.1 ".tar" file, it will be shown on the top of the list. Then you can download it and flash to your phone. It is firmware for SM-N910F N4 DBT (Germany).
You can also flash 5.0.1 file and factory reset your phone. When 5.1.1 is available you will get OTA update.
Wysłane z mojego SM-N910C przy użyciu Tapatalka

shreqg2 said:
it seems that your phone has russian product code (ser).
Here is the newest firmware for this csc:
http://www.sammobile.com/firmwares/download/49812/n910cxxu1boe1_n910coxe1bof1_ser/
Click to expand...
Click to collapse
i do the flash boot from odin.and succeed! After that i do a wipe/factory rest.
But, its still stuck om the logo and make a restart :/

Return to Basic B331, B513, kk,mm MT-L09

Problem , yes I am experienced and no it is not.
Now Huawei Mate 7
root , Yes
unlock, yes
Android version 6.0 B513 works but no Wi-Fi and Bluetooth
B331 version works fine
Update B513 works but no Wi-Fi and Bluetooth
Now B513 works but can not return to B331 .
because I want to have wifi
It is …. But yeah
can someone tell me to go back to the default / basic
have now tried everything, succeeds b513 , no Wi-Fi .
TWRP restore does not work , not even the hard reset method 3 buttons. So now I hate or just say ........
how do I go back to square all the way ....
so just , I screwed up , now back to start again .
I really can not find anywhere .
dead to alive .
help please

I back to stock b331 from b513. Tomorrow I write you how do it. You'll must have unlck code to bootloader. If dont have I can't help you
Why twrp not work???
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka

here you have the guide how back to b331 stock ---> http://forum.xda-developers.com/showpost.php?p=65371195&postcount=207

Does not work for me, I tried everything.
This http://forum.xda-developers.com/mate-7/general/tried-to-roll-b511-to-b326-fail-try-t3302479 and this http://forum.xda-developers.com/showpost.php?p=65371195&postcount=207 . but still no luck.
am with TWRP returned to B513
B511 works also.
I can in the fastboot
I can in the TWRP
when I try now I get FAILED <remote: command not allowed>
Now I do not know what to do.
B513 works fine, but I have no WIFI, Blutooth and GPS

You have locked bootloader but you see your bootloader it's unlock
Unlock bootloader with you code
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka

This works thanks Unlock bootloader with you code

chudy_85 said:
You have locked bootloader but you see your bootloader it's unlock
Unlock bootloader with you code
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
Click to expand...
Click to collapse
fastboot reboot

jpmaas said:
fastboot reboot
Click to expand...
Click to collapse
what you meen ???

chudy_85 said:
what you meen ???
Click to expand...
Click to collapse
Nothig I made a clerical error and accidental post quick repley

chudy_85 said:
here you have the guide how back to b331 stock ---> http://forum.xda-developers.com/showpost.php?p=65371195&postcount=207
Click to expand...
Click to collapse
it worked but had to unlock several times bootloader.
this was the main problem why it has not worked.
Thanks chudy_85

Yes I now and this process is to long but only one for now. Good work
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka

Quite weird to hear, that Wifi, BT and GPS don't work, since I have B513 and everything works just fine, Wifi is fast, BT works with calls and other audio and GPS is accurate too. Only thing that keeps messing around since upgradeing it to B513, is Google Play, which gives me error "can't retrieve information from server" Is it just ROM-s fault or is it something about settings?

If your gp not work go to setting/aplication and find google framework services and clean data and cache then reboot fone.
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka

i9506 Stuck on CM13 Boot Screen

Hello there ... !!
My Galaxy S4 i9506 is stuck on CM 13 Boot Logo.
Before that I flashed that ROM, it flashed successfully but lost Root privilege. So I was trying to Root it again via CF Auto Root by Odin but It didn't worked.
Then I Factory Reset it from Stock Recovery and After rebooting It is Stuck on Boot Screen.
Kindly help me what to do ??
I can't find a matched firmware of FTM(France). Can I flash any other region's firmware??
Please Help.

1. Have similar problem here https://r.tapatalk.com/shareLink?ur...share_tid=3389651&share_fid=3793&share_type=t
2. You should be able to Flash any firmware
Wysłane z mojego GT-I9506 przy użyciu Tapatalka

baciany said:
1. Have similar problem here https://r.tapatalk.com/shareLink?ur...share_tid=3389651&share_fid=3793&share_type=t
2. You should be able to Flash any firmware
Wysłane z mojego GT-I9506 przy użyciu Tapatalka
Click to expand...
Click to collapse
Will me phone lost modem file ?? It may not fetch Network signals?

If your is not carrier locked then you can flash any firmware.

GDReaper said:
If your is not carrier locked then you can flash any firmware.
Click to expand...
Click to collapse
It was running properly before. I don't know how to check either it's carrier locked or not.
Can you please tell me how to check ??

VeryShareef said:
It was running properly before. I don't know how to check either it's carrier locked or not.
Can you please tell me how to check ??
Click to expand...
Click to collapse
Does it work with any SIM?

GDReaper said:
Does it work with any SIM?
Click to expand...
Click to collapse
I guess, Yes.
I tried 2 networks only.

VeryShareef said:
I guess, Yes.
I tried 2 networks only.
Click to expand...
Click to collapse
Then it should be unlockedcand you should be able to flash any firmware with no problems.

rooted or not

OK I so I tried rooting my device with odin I have a galaxy s7 edge SM-G935T and everything went great it said passed, I used root.bat, everything It installed supersu for me and everything but when I went to root checker this showed up (look at screen shot) I have another picture also of my device saying my phone is rooted (look at picture)
So is my device rooted or not I can't use any of the rooted apps or anything.

Soooo noo ;d use cf autoroot - best solution and disable rom encryption
Wysłane z mojego SM-G935F przy użyciu Tapatalka

sebusmen69 said:
Soooo noo ;d use cf autoroot - best solution and disable rom encryption
Wysłane z mojego SM-G935F przy użyciu Tapatalka
Click to expand...
Click to collapse
I tried using cf autoroot but it just says fail

No Update app after updating to 7.0

Hi :3 I just updated my P9 Lite to 7.0 with proxy method. I needed to do factory reset because it won't turn on. After this my phone turned on but i dosen't have keyboard and the Update app. What can i do with it? Thanks for helping :3

NoctisCaelumFFXV said:
Hi :3 I just updated my P9 Lite to 7.0 with proxy method. I needed to do factory reset because it won't turn on. After this my phone turned on but i dosen't have keyboard and the Update app. What can i do with it? Thanks for helping :3
Click to expand...
Click to collapse
You can do nothing. You need to get on Marshmallow because you installed a wrong version.

Coolyou said:
You can do nothing. You need to get on Marshmallow because you installed a wrong version.
Click to expand...
Click to collapse
Wrong,
You have to install the additional package and the missing apps will be installed.

Potato997 said:
Wrong,
You have to install the additional package and the missing apps will be installed.
Click to expand...
Click to collapse
Where i can find it :3
Wysłane z mojego HUAWEI VNS-L21 przy użyciu Tapatalka

NoctisCaelumFFXV said:
Where i can find it :3
Wysłane z mojego HUAWEI VNS-L21 przy użyciu Tapatalka
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932

Potato997 said:
https://forum.xda-developers.com/huawei-p9lite/how-to/nougat-official-firmware-t3512932
Click to expand...
Click to collapse
Thank you very much :3 Installed and working excellently :3
Wysłane z mojego HUAWEI VNS-L21 przy użyciu Tapatalka

You're welcome

hi guys. I updated my p9 lite the same way (proxy finder) but after the update I made a full data wipe and now I have no keyboard and I can't bypass the google account. And because of the full wipe i don't have the recovery to flash the 2nd .zip file to enable the other apps, so im stuck :-s. I´ve tried to flash the .zip file via dload method but with no results. Can you help me?? thanks in advance

mr.siffredi said:
hi guys. I updated my p9 lite the same way (proxy finder) but after the update I made a full data wipe and now I have no keyboard and I can't bypass the google account. And because of the full wipe i don't have the recovery to flash the 2nd .zip file to enable the other apps, so im stuck :-s. I´ve tried to flash the .zip file via dload method but with no results. Can you help me?? thanks in advance
Click to expand...
Click to collapse
First of all I know my English is really bad but anyway..Is your bootloader unlocked? If so you can just install twrp and flash the zip file. And if it's not.. You need to get into fastboot mode in order to unlock it and install twrp.. And to do that you need to first turn your phone off then plug in your charger and quickly press and hold the power and volume down buttons before the screen turns on.. Now you're in Fastboot mode..Now search on Google or xda how to unlock and get the bootloader unlock code..and install twrp for nougat..you know.. I don't know if you can find the nougat twrp here on xda but I think you can get it​ from htcmania.com :victory: I hope that helps