Database Users

[Q&A] [Share][cwm][philz touch 6] galaxy grand prime (working on sm-g530h/f)

Q&A for [Share][cwm][philz touch 6] galaxy grand prime (working on sm-g530h/f)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Share][cwm][philz touch 6] galaxy grand prime (working on sm-g530h/f). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Should I have rooted device before flashing this cwm ??

FunGD said:
Should I have rooted device before flashing this cwm ??
Click to expand...
Click to collapse
Yes, it don't work with non-rooted devices.

platinumlayer said:
Yes, it don't work with non-rooted devices.[/QUOTE
ok then last question..can you check knox status after rooting and flashing this cwm please ??
Click to expand...
Click to collapse

FunGD said:
platinumlayer said:
Yes, it don't work with non-rooted devices.[/QUOTE
ok then last question..can you check knox status after rooting and flashing this cwm please ??
Click to expand...
Click to collapse
it change knox status, and you will lose warranty.
Click to expand...
Click to collapse

Installed successfully on 530H. But the screen becomes small by a very little margin. Very very little. I mean its unnoticeable if u dont notice it. Also it shows "RECOVERY IS NOT SEANDROID ENFORCING Set Warranty Bit : recovery" on the boot. And if u reboot it or if u turn it off then boot it, it always goes into recovery. Other than that.. It works fine. Does all other stuff.

Great Work
Thanks brother, its work for me, Now i am finishing backup my rom and finishing deodex my rom... Waiting for CyanogenMod Support...
Sorry for my bad english..
From Indonesia SM-G530H

I think the link for download is dead

Kade Sonix said:
Installed successfully on 530H. But the screen becomes small by a very little margin. Very very little. I mean its unnoticeable if u dont notice it. Also it shows "RECOVERY IS NOT SEANDROID ENFORCING Set Warranty Bit : recovery" on the boot. And if u reboot it or if u turn it off then boot it, it always goes into recovery. Other than that.. It works fine. Does all other stuff.
Click to expand...
Click to collapse
I have exact same problem with you, my grand prime always go to recovery mode everytime i reboot my phone, i know its not very big problem, but kinda annoying because i have to reboot my prime twice everytime i reboot it,.... first reboot goes to recovery mode, and then reboot system now (thats my second reboot) and finally go to normal mode.
Does anybody have a simple solution to fix this?
Other than that problem, this CMW really helpful
Thanks

report a problem, friend:
when I start to load the smartphone off, there goes the animation of the battery charging and only I restarted the recovery, so there is no way that you can carry off.

Need help
Im trying to port CM11 to grand prime. anyone is willing to test it?

Grand Prime CWM 6.0 Download link
Tried to download CWM 6.0, but link is not working!!
Anybody has a working link?
Thanks

no, i installed in my device after install the recovery i rooted with the zip file with SuperSU

Can we flash .zip files ?

Good job
working in my Galaxy Grand Prime model sm G530h. i test today and is Great..Thanks

mquirox said:
Tried to download CWM 6.0, but link is not working!!
Anybody has a working link?
Thanks
Click to expand...
Click to collapse
Here,I search for 30 minute and finally found an russian forum that upload this
Just put it in odin and flash :good:

I dont flash it yet but the screen is the same as you described

GOOD!
GOOD work!

shadowfantom said:
Does it work on G530FZ???
Click to expand...
Click to collapse
I can confirm it's working on G530FZ

you have to download mega app make an account in this app then activate thats all
understud

[Q] Weird WiFi issues

I could really use some help/advice on this one.. I have been searching xda and google for ages trying every "trick" there is but nothing works. My phone is the Note 3 Sm-N900(exynos)
My problem is that my wifi simply won't start:/ Now let me give you the history of this problem
I was on KitKat and my wifi wasn't working and I was pretty sure it is a hardware problem. I wanted to factory reset it and get it fixed somewhere.
I saw android lollipop and thought oh well if I am resetting everything I might as well flash android 5.0 (russian version)
I did that and baam, WiFi was back! That led me to think that it was just some software issue after all and I was damn happy.
I instantly rooted and installed trwp (made a backup) as I always do.
On the next day, wifi stopped working again, I restored the backup and everything back to normal with working wifi.
Then I decided to install the new cyanogenmod alpha version. Wifi still working fine only sd card wasn't recognized for which I downloaded the fix which is available in the cyanogen thread.
After installing the fix wifi was gone again.
I restored my backup I had made after upgrading to lollipop but now WiFi still isn't working. Is it a hardware problem after all?
That's about it. If you need any logs or any additional information please let me know.
Thanks very much in advance!

letrero said:
That's about it. If you need any logs or any additional information please let me know.
Thanks very much in advance!
Click to expand...
Click to collapse
Dial *#1234# in STOCK Lollipop.

Joku1981 said:
Dial *#1234# in STOCK Lollipop.
Click to expand...
Click to collapse
Did that and I got this:
AP: N900XXUEBOA6
CP: N900XXUEBNL6
CSC: N900SEREBOA6
I did a google search on that code and if I understood right the problem is that MODEM is missing. I tried flashing a few different MODEM files (all for sm-n900 and starting with XX which I believe is my country code).
Result was no connection at all, sim card not being recognized and missing IMEI. Now I am back on stock lollipop (rooted and with trwp) so back to normal besides the WiFi issue.

Wifi is from kernel not the modem .

JJEgan said:
Wifi is from kernel not the modem .
Click to expand...
Click to collapse
oh ok thanks. I am not experienced in that area. I read about kernels too somewhere but didn't really find anyone and also don't know much about it so if you could give some advice I'd highly appreciate it.
So 2 more specific questions on this...
1. Do you think flashing a new kernel might solve this problem?
2. What should I look out for when finding the right kernel?
Again I only have experience rooting and flashing stuff so sorry if I am a little noobish on the subject

Flashing a non stock kernel will trip knox .
If already Knox 0x1 then try the Civato kernel posted in this thread .
http://forum.xda-developers.com/gal...t/rom-civz-flexlollipop-rev1-2-aroma-t2987732
Your problem reads as hardware as you have changed kernel via firmware flashes .

JJEgan said:
Flashing a non stock kernel will trip knox .
If already Knox 0x1 then try the Civato kernel posted in this thread .
http://forum.xda-developers.com/gal...t/rom-civz-flexlollipop-rev1-2-aroma-t2987732
Your problem reads as hardware as you have changed kernel via firmware flashes .
Click to expand...
Click to collapse
Thanks I am super careful on this matters so just to clarify..
install just the kernel or the rom?
It says that it is for the SM-N9005 so will it be compatible since I have the SM-N900?
Thanks again and I can't wait to give it a try

Sorry it is my fault did not realize it was not a 9005 .
So don't flash a 9005 kernel .
Have a look here .
http://forum.xda-developers.com/galaxy-note-3/galaxy-note-3-exynos-android-development

JJEgan said:
Sorry it is my fault did not realize it was not a 9005 .
So don't flash a 9005 kernel .
Have a look here .
http://forum.xda-developers.com/galaxy-note-3/galaxy-note-3-exynos-android-development
Click to expand...
Click to collapse
I already had a look earlier but was mainly looking for roms. Now I believe I found a good kernel which I will try once it's downloaded (slow internet atm:/)
If you don't mind it would be very nice if you could have a quick look at it and tell if I am right or wrong in thinking this one is ok
(http://forum.xda-developers.com/gal...il-6-2015-kernel-n900lollipop-pekaka-t3073666)
EDIT: Flashed that kernel but still no wifi

So I tried flashing various kernels without result. If nobody else has any ideas I guess I will have to take it to a shop and see if I can get it fixed.
Is there anyway to make sure myself if it is hardware or software related?

SM-T535 - Error while flashing a ROM. No Kernel?

Hello,
I need some help. I am using a Samsung Galaxy Tab 4 10.1 LTE SM-T535 and I want to flash a custom rom, but it is not working. If I want to flash http://forum.xda-developers.com/tab-4/development/rom-slimrom-5-0-1-alpha-0-7-t2963906 or http://forum.xda-developers.com/tab-4/development/rom-pac-rom-lp-mr1-beta-3-sm-t530-531-t3216682 everything looks great and the tablet restarts. Then the following error appears:
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit : kernel
Does this mean there is no kernel or what? I flashed the openrecovery-twrp-2.8.7.0-SM-T5XX-150810_matisse_wifi_3g_lte and wiped everything before flashing the ROM.
Please help me

Cololand said:
Hello,
I need some help. I am using a Samsung Galaxy Tab 4 10.1 LTE SM-T535 and I want to flash a custom rom, but it is not working. If I want to flash http://forum.xda-developers.com/tab-4/development/rom-slimrom-5-0-1-alpha-0-7-t2963906 or http://forum.xda-developers.com/tab-4/development/rom-pac-rom-lp-mr1-beta-3-sm-t530-531-t3216682 everything looks great and the tablet restarts. Then the following error appears:
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit : kernel
Does this mean there is no kernel or what? I flashed the openrecovery-twrp-2.8.7.0-SM-T5XX-150810_matisse_wifi_3g_lte and wiped everything before flashing the ROM.
Please help me
Click to expand...
Click to collapse
You have completed all the prerequisites before flashing (i mean 5.0 stock) ? And TWRP better to use https://www.androidfilehost.com/?w=files&flid=40746 .
Forgot text is correct , dont worry .

repey6 said:
You have completed all the prerequisites before flashing (i mean 5.0 stock) ? And TWRP better to use https://www.androidfilehost.com/?w=files&flid=40746 .
Forgot text is correct , dont worry .
Click to expand...
Click to collapse
Thanks, for the fast reply.
sub77 said:
Download official Samsung Lollipop Rom and flash with odin if you are coming from KitKat
Click to expand...
Click to collapse
Do u mean this step? Where do I get this ROM? I searched everywhere and I don't find it.

Cololand said:
Thanks, for the fast reply.
Do u mean this step? Where do I get this ROM? I searched everywhere and I don't find it.
Click to expand...
Click to collapse
If you have still 4.4.2 firmware you can select in this thread http://forum.xda-developers.com/tab-4/general/links-galaxy-tab-4-official-lollipop-5-t3102844 suitable for you firmware ( i mean region) and flash via Odin .

repey6 said:
If you have still 4.4.2 firmware you can select in this thread http://forum.xda-developers.com/tab-4/general/links-galaxy-tab-4-official-lollipop-5-t3102844 suitable for you firmware ( i mean region) and flash via Odin .
Click to expand...
Click to collapse
Thanks, you saved my day. I installed the CM ROM. But one more Problem: When I reboot this message still appears:
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit : kernel
and Apps are getting optimized. After that, everything is working fine. Is this normal?
By the way: The statusbar is very small and a few texts are not in german, but I think this is a ROM bug.

Cololand said:
Thanks, you saved my day. I installed the CM ROM. But one more Problem: When I reboot this message still appears:
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit : kernel
and Apps are getting optimized. After that, everything is working fine. Is this normal?
Click to expand...
Click to collapse
Yes it is . But CM13 much of raw else as for me . BlissPop and PacRom are more better .

need g900f custom rom but like stock for disable reactivation lock urgent

hello
i need custom recovery rom for g900f but same like stock rom .
acutlly i want to disable reactivation lock in my g900f ,i bypass every time but after flash any time
it,s need again samsung account.
so i need custom rom for that but sam like stock rom

i solve it , close thread

Mr Hassan said:
hello
i need custom recovery rom for g900f but same like stock rom .
acutlly i want to disable reactivation lock in my g900f ,i bypass every time but after flash any time
it,s need again samsung account.
so i need custom rom for that but sam like stock rom
Click to expand...
Click to collapse
wondering how you solved it

j0nandbr00k2014 said:
wondering how you solved it
Click to expand...
Click to collapse
it,s just OFFLINE work, not online
and also it,s very very ,,even toooooooooooooooooooooo easy job ,
i think i have screen short,s even ,

j0nandbr00k2014 said:
wondering how you solved it
Click to expand...
Click to collapse
tell me right section i,ll create thread ,

Sm-G9298F Kernel is not seandroid enforcing

Can you please help me because i think i screwed up pretty badly
i watched a youtube video on how to root samsung galaxy s6 edge plus with odin and i did it step by step (i think so). Now i am here with a bricked device.When i try to boot up it shows the phone's model and stuff (as it should) but in the top left corner there is a red message saying <<KERNEL IS NOT SEANDROID ENFORCING>> and i dont know what you do. Also i wanted to install the stock firmware but i dont know my build number soo i think i fked up....
If you see this and know the solution please help me as soon as possible.

it is possible boo t into system?
this is more important
is it possible , bro?
the word Kernel is not seandroid enforcing
you just ignore
this happen when you flash custom rom
and also change the kernel , and set kernel se linux permisive

no
no its not its stays like this for ever
i can power off by using twrp team recovery that i accidentaly installed
and i tried to format all data but it doesnt work
ive rooted 3 devices and this never happened to
sorry for the late reply

thank you for your time but i fixed it
thank you for the help but i miraculously i fixed it by installing the stock kernel (correctly) but if you can find me a a way of rooting it i would help me very much
thank you (again)

morodonta said:
thank you for the help but i miraculously i fixed it by installing the stock kernel (correctly) but if you can find me a a way of rooting it i would help me very much
thank you (again)
Click to expand...
Click to collapse
which variant doyou have ?
SM-G928C or
SM-G9287C
SM-G928F
SM-G928G
SM-G928I
if you are above one of variant.
you try flash custom kernel to root
here is website
http://forum.xda-developers.com/s6-edge-plus/orig-development/kernel-sm-g928-exynos-7420-skyhigh-t3428970
and if you need download link
you can pm me
good luck
---------- Post added at 06:28 PM ---------- Previous post was at 06:22 PM ----------
morodonta said:
no its not its stays like this for ever
i can power off by using twrp team recovery that i accidentaly installed
and i tried to format all data but it doesnt work
ive rooted 3 devices and this never happened to
sorry for the late reply
Click to expand...
Click to collapse
thats ok，
dont worry
every one start from learn , take easy

It's a sm-g928f

morodonta said:
It's a sm-g928f
Click to expand...
Click to collapse
if you like , you can flash skyhigh kernel
or just flash supersu zip from recovery for root

i tried to flash supersu.zip with twrp
i tried to flash supersu.zip with twrp recovery and it got stuck in reboot screen
its ok though i fixed it
but what should i do next to root it?