Latest version of xposed framework now works with our phones and does not need "disable resource hooks".
What version of SuperSU have you installed?
xd4d3v said:
Latest version of xposed framework now works with our phones and does not need "disable resource hooks".
Click to expand...
Click to collapse
Yes it works, but with which compatible modules? are you trying some?and which one you can prefer us?
RobboW said:
What version of SuperSU have you installed?
Click to expand...
Click to collapse
The only SuperSU that works AFAIK is 2.64, once installed, you can update the binary, as normal.
I have PMed chainfire about this, not sure if he'll bother to look into it.
Skorpi58 said:
Yes it works, but with which compatible modules? are you trying some?and which one you can prefer us?
Click to expand...
Click to collapse
I personally use Activity Force new task, adblocker, greenify, Marshmallow SD fix Pictures2SD Downloads2SD, Youtube AdAway.
all you need to do is try
xd4d3v said:
The only SuperSU that works AFAIK is 2.64, once installed, you can update the binary, as normal.
I have PMed chainfire about this, not sure if he'll bother to look into it.
Click to expand...
Click to collapse
Ok, thanks, well, I'll try it out then After another backup of course....
I also found 2.64 the only one to work with B560
Installed Xposed V86 and it does show as active. Gravitybox was useless. Got MinMin Gaurd installed, not sure if it works yet. Will play about more through the week. I don't need much more from it.
Really, the main thing is add blocking. B560 is pretty good as is.
RobboW said:
Installed Xposed V86 and it does show as active. Gravitybox was useless. Got MinMin Gaurd installed, not sure if it works yet. Will play about more through the week. I don't need much more from it.
Really, the main thing is add blocking. B560 is pretty good as is.
Click to expand...
Click to collapse
yeah, anything that themes will most likely fail due to emui.
most of the modules are designed to work with AOSP, and fail with heavily customised roms.
I've installed the Xposedinstaller and then flashed Xposed v86-arm, but after wiping dalvik/cache and rebooting I just get stuck on the Huawei logo. Anyone can tell me how long you had to wait for the phone to finally finish booting? I waited about 20 minutes not sure if this is happening to everyone. I have MT7-L09 with B560, rooted with SuperSU 2.64PRO.
Any help is greatly appreciated!
Yeah, can take a while. The phone sits there with the animated Huawei logo and you think it's dead but it's optimising, just doesn't let you know. I usually leave it on a charger and come back to it later.
RobboW said:
Yeah, can take a while. The phone sits there with the animated Huawei logo and you think it's dead but it's optimising, just doesn't let you know. I usually leave it on a charger and come back to it later.
Click to expand...
Click to collapse
Thank you! I'm going to give it another shot then
Related
【Version】
V2.20.40.165_20160118_6541
【Model Name】
ZenFone2 ZE551ML
1.Fixed Miracast connection issue (with car screen)
2.Enhance Cell broadcast stability
3.Remove Dr. Safety
update via system update
Ota link
Here we go again.
http://fota.asus.com/delta_package/...19_2/WW_Z00A-20160107-20160118-20160119_2.zip
Wow Asus working overtime
Not really, this happened with last update too.
Someone tried rooting this system? I have bootloop after every attempt :/
I have noticed a better performance with release 2.20.40.164. The battery is not draining as in previous version. I am happy with this.
GorgorothGdynia said:
Someone tried rooting this system? I have bootloop after every attempt :/
Click to expand...
Click to collapse
Which method have you been using?
Method 1 from this guide http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063 It always worked
GorgorothGdynia said:
Method 1 from this guide http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063 It always worked
Click to expand...
Click to collapse
I have been using the Method 3 from this thread: http://forum.xda-developers.com/zenfone2/general/asus-zenfone-2-flashing-recovery-mode-t3096596
The root persists after every OTA. So no need to un-root and root again, after any OTA.
rooting does well, but i getting bootloped when install xposed v79.
ps : currently rolled back to .156 using pre-root then updating again to .165
wish me luck
You mean 1 Click Root Tool for Zenfone 2? Thanks for info, I will try and inform the rest of the community
once again for everyone: ONE-CLICK root (Zenfone_quickroot.zip) doens't work on .165!
@piway I'm doing the same righ now haha...
piway said:
rooting does well, but i getting bootloped when install xposed v79.
ps : currently rolled back to .156 using pre-root then updating again to .165
wish me luck
Click to expand...
Click to collapse
I was about to update and install xposed 79. Thanks for the info.
GorgorothGdynia said:
You mean 1 Click Root Tool for Zenfone 2? Thanks for info, I will try and inform the rest of the community
once again for everyone: ONE-CLICK root (Zenfone_quickroot.zip) doens't work on .165!
@piway I'm doing the same righ now haha...
Click to expand...
Click to collapse
Yap thats the one. "Method 3 (1 CLICK ROOT TOOL)"
orlapa said:
I have noticed a better performance with release 2.20.40.164. The battery is not draining as in previous version. I am happy with this.
Click to expand...
Click to collapse
yep I noticed that too
GorgorothGdynia said:
You mean 1 Click Root Tool for Zenfone 2? Thanks for info, I will try and inform the rest of the community
once again for everyone: ONE-CLICK root (Zenfone_quickroot.zip) doens't work on .165!
@piway I'm doing the same righ now haha...
Click to expand...
Click to collapse
well..done for now with .164 :victory:
any news that xposed will running in this version? just in case i dont wanna to rolled back if get bootlop again haha
update : confirmed xposed v.79 work in this version .164
GorgorothGdynia said:
You mean 1 Click Root Tool for Zenfone 2? Thanks for info, I will try and inform the rest of the community
once again for everyone: ONE-CLICK root (Zenfone_quickroot.zip) doens't work on .165!
@piway I'm doing the same righ now haha...
Click to expand...
Click to collapse
This is confusing. As far as I know, the 1-click root package is called "ZenFoneRootKit.zip". This is what's described in Method 3.
I've never heard of "Zenfone_quickroot.zip"...
Now is Method 3 (ZenFoneRootKit) usable for .165 or is it not?
@Shaxine, thank you. Method 3rd (ZenFoneRootKit) from here http://forum.xda-developers.com/zenfone2/general/asus-zenfone-2-flashing-recovery-mode-t3096596 works good on .165.
This is s.h.i.t > http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063 - bootloop is certain.
@piway thank you for info about xposed. Now we have to wait for an update xposed :<
They Should provide use Marshmallow Instead :'(
GorgorothGdynia said:
@Shaxine, thank you. Method 3rd (ZenFoneRootKit) from here http://forum.xda-developers.com/zenfone2/general/asus-zenfone-2-flashing-recovery-mode-t3096596 works good on .165.
This is s.h.i.t > http://forum.xda-developers.com/zenfone2/general/root-newbie-root-instructions-zenfone-2-t3114063 - bootloop is certain.
@piway thank you for info about xposed. Now we have to wait for an update xposed :<
Click to expand...
Click to collapse
Show some respect for the developers they are doing and sharing it for free in their free time if you don't like go make one for yourself and use it :silly::silly:
xposed v79 and root are both working for me on the 165 update. I did my typical dance to upgrade from 164 to 165:
Boot tethered twrp
Do a full backup
"install" the xposed-uninstaller
Reboot
Wait for apps to be optimized
Go into SuperSU and do full uninstall
Reboot
Let the upgrader install the update
Reboot and wait for apps to be optimized
Boot tethered twrp
Install SuperSU
Install xposed
Reboot
Wait for apps to be optimized
Because of the backup and optimizing apps three times, the whole process takes an hour or more. The tethered TWRP also requires a computer. This method of running TWRP gives me some of the benefits of an unlocked bootloader---easy rooting and easy install of xposed---without having to actually unlock my boot loader and (possibly) void my warranty. I can understand some people preferring the ease of the one-click type installers, but I've not had good luck with them.
I put up the tethered package I use in a post on the tethered TWRP thread. Some of the components are updated, and it seems more reliable than the original tethered package.
I can confirm that xposed 79 it's working. And I was able to update as usual.
I know this isn't iOS, but i was wondering if Android had something similar to Cydia on iOS. A place where i can find/download new/old(working) tweaks. Updated ones a well.
Any tips appreciated!
Xposed would be the closest thing.
But with that being said, most of the stuff that you would need Cydia for on the iphone can be done natively on android.
MrBigWaffles said:
Xposed would be the closest thing.
But with that being said, most of the stuff that you would need Cydia for on the iphone can be done natively on android.
Click to expand...
Click to collapse
Ahh true. Since android is more "OPEN", then iOS's pain in the ass locked file system. But exposed, i see that on the XDA app. Is that the same thing? Or do i need to download it elsewhere?
AngelIsL33T said:
Ahh true. Since android is more "OPEN", then iOS's pain in the ass locked file system. But exposed, i see that on the XDA app. Is that the same thing? Or do i need to download it elsewhere?
Click to expand...
Click to collapse
Youll need an unlocked bootloader and root.
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
I wouldn't recommend doing this if you're unsure about what you're doing. A stable Xposed is going to be released soon enough according to the devs.
MrBigWaffles said:
Youll need an unlocked bootloader and root.
https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221
I wouldn't recommend doing this if you're unsure about what you're doing. A stable Xposed is going to be released soon enough according to the devs.
Click to expand...
Click to collapse
Ahh, Im on the snap S8, so locked bL. Guess i'll wait for it to get updated for snap variants.
AngelIsL33T said:
Ahh, Im on the snap S8, so locked bL. Guess i'll wait for it to get updated for snap variants.
Click to expand...
Click to collapse
I recently switched from iOS to Android too, and was looking for the same thing. Xposed is very similar for Phantom and YouTube++ alternatives...
I have it installed on my SM-950U and it works just fine. Look up the new version of Xposed for Android Nougat (7.0 or 7.1) (it should be on XDA) by PurifyOS. The official download links for the frameworks are down, but if you go to page 241 or something someone has them reupped. Flash the framework .zip through FlashFire on your phone after rooting, and then install the .apk in the post.
And... voila! You're done! You should have Xposed working on your version of Nougat (7.0 or 7.1)
Hope this helps
iamnotexisting said:
I recently switched from iOS to Android too, and was looking for the same thing. Xposed is very similar for Phantom and YouTube++ alternatives...
I have it installed on my SM-950U and it works just fine. Look up the new version of Xposed for Android Nougat (7.0 or 7.1) (it should be on XDA) by PurifyOS. The official download links for the frameworks are down, but if you go to page 241 or something someone has them reupped. Flash the framework .zip through FlashFire on your phone after rooting, and then install the .apk in the post.
And... voila! You're done! You should have Xposed working on your version of Nougat (7.0 or 7.1)
Hope this helps
Click to expand...
Click to collapse
When flashing in flashwire , do I select mount read/write?
Edit: nvm I got it. But when I try to install xposed thru the installer, it fails system update and goes to recovery
AngelIsL33T said:
When flashing in flashwire , do I select mount read/write?
Edit: nvm I got it. But when I try to install xposed thru the installer, it fails system update and goes to recovery
Click to expand...
Click to collapse
Yeah, you should mount as r/w. What s8 model do you have?
MrBigWaffles said:
Xposed would be the closest thing.
But with that being said, most of the stuff that you would need Cydia for on the iphone can be done natively on android.
Click to expand...
Click to collapse
I'm quiet disagree with ya,
stock Android without unlocked bootloader and root is almost as bad as ios !!
iamnotexisting said:
Yeah, you should mount as r/w. What s8 model do you have?
Click to expand...
Click to collapse
Regular s8. But the xda app has a exposed section with tweaks. I guess that'll work correct?
Did anybody using Magisk 16 on Honor 8? My main concern is the Magisk Hide and the safety checks...
Since Magisk 16 there are some support on Honor devices but in the real life I am not sure if is a point to going away from SuperSU...
It works fine. Supersu was taken over by a Chinese company. Chel stopped reviewing code for it. So unless you like your privacy, stick with supersu.
agraceful said:
It works fine. Supersu was taken over by a Chinese company. Chel stopped reviewing code for it. So unless you like your privacy, stick with supersu.
Click to expand...
Click to collapse
Everything is about privacy in this days...
Which is the last version of SuperSU, which was maintained by Chel?
So for privacy point is better Magisk. How is the privacy in Magisk? That's a big question
Which version of Magisk you're using? I have FRD-L09C432b394 but I am wondering if the Magisk Hide and the safety checks will work, because this s known problem with Honor/Huawei devices. I see the support from v16 for Honor devices but I don't know what's clearly mean that.
it's been working fine for me including safetynet. Interestingly, I have to keep USB debugging enabled to pass safetynet
jasonvxs4 said:
Interestingly, I have to keep USB debugging enabled to pass safetynet
Click to expand...
Click to collapse
THANK YOU, THANK YOU, THANK YOU!
I was looking everywhere as to why it was passing before the update to B404 and now was failing!
Flicked the option and passing safteynet again!
agraceful said:
It works fine. Supersu was taken over by a Chinese company. Chel stopped reviewing code for it. So unless you like your privacy, stick with supersu.
Click to expand...
Click to collapse
jasonvxs4 said:
it's been working fine for me including safetynet. Interestingly, I have to keep USB debugging enabled to pass safetynet
Click to expand...
Click to collapse
linkazoid said:
THANK YOU, THANK YOU, THANK YOU!
I was looking everywhere as to why it was passing before the update to B404 and now was failing!
Flicked the option and passing safteynet again!
Click to expand...
Click to collapse
What version of Magisk you're using on which firmware?
dewadi said:
What version of Magisk you're using on which firmware?
Click to expand...
Click to collapse
V16 on B404, was also using v16 on B403 too
I noticed earlier that my usb debugging was switching straight off after enabling. Make sure this isn't happening to you. Click the reset to default button at the bottom and then select it again
I'm using 16.3. Almost every single magisk version released has worked fine for me. Chel doesn't maintain it anymore. You can use an older version of supersu but I'm not sure why you'd want to do that. As far as usb debugging.. i always have that on anyway.. i have an L04 and I'm on 392 firmware. Magisk is much better. I was very very hesitant when I switched, specially since it wasn't at the state it is now, but I'm glad i switched.
linkazoid said:
V16 on B404, was also using v16 on B403 too
I noticed earlier that my usb debugging was switching straight off after enabling. Make sure this isn't happening to you. Click the reset to default button at the bottom and then select it again
Click to expand...
Click to collapse
agraceful said:
I'm using 16.3. Almost every single magisk version released has worked fine for me. Chel doesn't maintain it anymore. You can use an older version of supersu but I'm not sure why you'd want to do that. As far as usb debugging.. i always have that on anyway.. i have an L04 and I'm on 392 firmware. Magisk is much better. I was very very hesitant when I switched, specially since it wasn't at the state it is now, but I'm glad i switched.
Click to expand...
Click to collapse
Did you tried Magisk 16.4?
Sorry if I'm hijacking.
Since you're talking about 16.3 and 16.4, does Magisk hide works?
That was my previous problem with rooting. I would like to remove some apps and add AdAway, while using Google Pay.
zinko_pt said:
Sorry if I'm hijacking.
Since you're talking about 16.3 and 16.4, does Magisk hide works?
That was my previous problem with rooting. I would like to remove some apps and add AdAway, while using Google Pay.
Click to expand...
Click to collapse
Anyone have any clue about this?
zinko_pt said:
Anyone have any clue about this?
Click to expand...
Click to collapse
that's what I am running
jasonvxs4 said:
that's what I am running
Click to expand...
Click to collapse
Magisk hide working?
jasonvxs4 said:
it's been working fine for me including safetynet. Interestingly, I have to keep USB debugging enabled to pass safetynet
Click to expand...
Click to collapse
Thanks for this trick man! I was puzzled as to why I was failing the SN check after passing it for a few hours.
I will retry flashing Magisk 16 :good:
takichiman said:
Thanks for this trick man! I was puzzled as to why I was failing the SN check after passing it for a few hours.
I will retry flashing Magisk 16 :good:
Click to expand...
Click to collapse
Magisk 16.4 works fine with Hide and fingerprint sensor.
zinko_pt said:
Magisk 16.4 works fine with Hide and fingerprint sensor.
Click to expand...
Click to collapse
Thanks for the info. I will reflash magisk 16.4 on a fresh stock L04B395 ROM and update you if the Safetynet fails
takichiman said:
Thanks for the info. I will reflash magisk 16.4 on a fresh stock L04B395 ROM and update you if the Safetynet fails
Click to expand...
Click to collapse
Safetynet passes in my L09C432B405.
zinko_pt said:
Safetynet passes in my L09C432B405.
Click to expand...
Click to collapse
I confirm that it passes on my L04C567B395. But because of that stupid USB debugging option that keeps getting turned off, I have to continuously toggle/untoggle the option and eventually sometimes plugging the phone to a computer to trigger the adb, so I can pass the safetynet test.
For the record I'm using Magisk 16.4
linkazoid said:
THANK YOU, THANK YOU, THANK YOU!
I was looking everywhere as to why it was passing before the update to B404 and now was failing!
Flicked the option and passing safteynet again!
Click to expand...
Click to collapse
WOW finally pass the safetynet!!!
Thanks alot!! I'm using magisk v17.1 with h8 frd10, what a magic!:highfive:
Got a message from Google Pay saying that my phone is rooted or is running uncertified software.
I have a T-Mobile variant that I converted , without root, to international. Anyone else see this issue?
Read. This is an old problem for years. Is your bootloader unlocked? Not rooted? Yes this breaks GPay. Hence, Magisk, root, systemless and Hide.
Easy fix.
I'm not rooted. Bootloader is locked.
I just booted into bootloader to double check, and it is locked and secure boot is enabled
coolmaster121 said:
I'm not rooted. Bootloader is locked.
I just booted into bootloader to double check, and it is locked and secure boot is enabled
Click to expand...
Click to collapse
It's a known issue for converted TMobile variant and I'm one of them. OP aware of the issues and hopefully an update coming soon.
Seems like onplus6t lost play protect certification with Android 10 also.
Is everyone in the same situation also?
coolmaster121 said:
Seems like onplus6t lost play protect certification with Android 10 also.
Is everyone in the same situation also?
Click to expand...
Click to collapse
You're going to need root to get this fixed. So first go this link and follow the instructions in the first post to get Magisk on your device.
Next, you may need to install the latest Magisk Manager. Link here.
With Magisk Manager on your device, you can install both "Busybox for Android NDK" and "MagiskHide Props Config" modules.
After a reboot, use a terminal app (I used Termux) to setup MagiskHide Props as per the instructions here. I just used the available OnePlus 6T fingerprint.
With it all setup, the device will show up as certified.
plasmamax1 said:
You're going to need root to get this fixed. So first go this link and follow the instructions in the first post to get Magisk on your device.
Next, you may need to install the latest Magisk Manager. Link here.
With Magisk Manager on your device, you can install both "Busybox for Android NDK" and "MagiskHide Props Config" modules.
After a reboot, use a terminal app (I used Termux) to setup MagiskHide Props as per the instructions here. I just used the available OnePlus 6T fingerprint.
With it all setup, the device will show up as certified.
Click to expand...
Click to collapse
Thanks for the suggestion.
I'm not rooted, and really don't want to root.
That is besides the point though, why is the official release of the OS having the issue.
coolmaster121 said:
I'm not rooted, and really don't want to root.
That is besides the point though, why is the official release of the OS having the issue.
Click to expand...
Click to collapse
When you say "official" release, did it come OTA, or did you download it, or use the updater from
the play store?
OnePlus isn't releasing 10 "officially" to the 6T, got a few bugs left to squish.
p51d007 said:
When you say "official" release, did it come OTA, or did you download it, or use the updater from
the play store?
OnePlus isn't releasing 10 "officially" to the 6T, got a few bugs left to squish.
Click to expand...
Click to collapse
It was a zip I downloaded and did a local update.
Caltinpla said:
It's a known issue for converted TMobile variant and I'm one of them. OP aware of the issues and hopefully an update coming soon.
Click to expand...
Click to collapse
Is there an existing thread on this? I didn't see one and am keeping an eye out for a fix that doesn't require root or an unlocked bootloader.
coolmaster121 said:
Seems like onplus6t lost play protect certification with Android 10 also.
Is everyone in the same situation also?
Click to expand...
Click to collapse
Yep
No, works fine. But I don't have a converted variant - all stock.
If you go back to stock as it is with T-variant (search for MSM tool), is it certified again?
https://forum.xda-developers.com/showpost.php?p=80844361&postcount=7
noideas4thisname said:
Is there an existing thread on this? I didn't see one and am keeping an eye out for a fix that doesn't require root or an unlocked bootloader.
Click to expand...
Click to collapse
Nope, I tried everything I heard of but nothing worked. Hopefully, OP releases an update with the fix soon!
Has anyone tried to flash the new Beta update to the OnePlus 6T TMobile version? Does it still give the same error "Build Version does not match Hardware version"?
bigmikey307 said:
Has anyone tried to flash the new Beta update to the OnePlus 6T TMobile version? Does it still give the same error "Build Version does not match Hardware version"?
Click to expand...
Click to collapse
I just downloaded and installed the open beta 2 and it's great! I'm going to give it a week and "test the engine and tires." I still have my Pie firmware, just in case.
NOTE: I installed using the local update method. I was rooted also with pie.
Main OP question was if you flash android 10 via zip and tried flashing beta on top to see if it works like it did on android 9. Please let me know if anyone tried this as well. Thank you in advance.
bigmikey307 said:
Has anyone tried to flash the new Beta update to the OnePlus 6T TMobile version? Does it still give the same error "Build Version does not match Hardware version"?
Click to expand...
Click to collapse
No 'build version does not match hardware version' error when flashing the new beta to TMO converted one plus 6t. I used TWRP 3.3.1.28 and all is good.
We still don't have the "reserve" partition though. OnePlus fonts will be missing and show up as italic fonts. A few apps are also gone but can be installed from play store. You wont pass Safety net so you will miss out on Netflix, etc.
No F/C's. Not sure on battery yet.
Everything else does seem good! I am enjoying it!
Scott said:
We still don't have the "reserve" partition though. OnePlus fonts will be missing and show up as italic fonts. A few apps are also gone but can be installed from play store. You wont pass Safety net so you will miss out on Netflix, etc.
No F/C's. Not sure on battery yet.
Everything else does seem good! I am enjoying it!
Click to expand...
Click to collapse
You can use the reserve partition magisk module...
justforgot said:
Main OP question was if you flash android 10 via zip and tried flashing beta on top to see if it works like it did on android 9. Please let me know if anyone tried this as well. Thank you in advance.
Click to expand...
Click to collapse
I used patched MSM tool to get TMobile variant to international ROM without unlocking bootloader and then I local upgraded to Android 10 stable, then local upgraded to OB 2 and all is well!
So I'm on Android 10 Stable with bootloader unlocked. What happens if I relock bootloader? Will I go into bootloop on restart, and will it get rid of the warning on restart, or do I need to do what @bigmikey307 did?
Update : I did the above but didn't go to beta 2
PapaMag said:
So I'm on Android 10 Stable with bootloader unlocked. What happens if I relock bootloader? Will I go into bootloop on restart, and will it get rid of the warning on restart, or do I need to do what @bigmikey307 did?
Update : I did the above but didn't go to beta 2
Click to expand...
Click to collapse
didn't understood what you meant about "didn't go to beta 2"...
for beta you need to flash via local update since you're on the official update yet. link is on the beta thread or on the Oxygen Updater app from playstore
TJSteveMX said:
didn't understood what you meant about "didn't go to beta 2"...
for beta you need to flash via local update since you're on the official update yet. link is on the beta thread or on the Oxygen Updater app from playstore
Click to expand...
Click to collapse
I just meant I stopped at 10.0 and didn't local upgrade to beta yet
Any word on the Play Protect Certification issue on T-Mo devices? I've been getting by without it on the Stable release, but I'll definitely go Beta of this update resolves the issue.
taylor85345 said:
Any word on the Play Protect Certification issue on T-Mo devices? I've been getting by without it on the Stable release, but I'll definitely go Beta of this update resolves the issue.
Click to expand...
Click to collapse
Nope, not certified. Someone posted some links in the Official Stable thread with instructions on how to do it using root and some magisk modules.
taylor85345 said:
Any word on the Play Protect Certification issue on T-Mo devices? I've been getting by without it on the Stable release, but I'll definitely go Beta of this update resolves the issue.
Click to expand...
Click to collapse
So like @Scott Mentioned, it requires root to pass at the moment. The Magisk mod is called Magiskhide props config and it works perfectly well as a workaround. Good luck!
Sent from my OnePlus6T using XDA Labs
I'm probably overlooking something obvious but I have no idea what it is.
Here's the story; I have a T-Mobile OP6t converted to International.
Flashed the update to OB31 (Open Beta 2).
I have Magisk and Titanium Backup installed, both with root access allowed.
However, I'm unable to get TB to actually uninstall some of the system apps I don't want.
Also, I can't copy and paste (via Solid Explorer) my edited HOSTS file to block ads.
What am I missing?
Scott said:
We still don't have the "reserve" partition though. OnePlus fonts will be missing and show up as italic fonts. A few apps are also gone but can be installed from play store. You wont pass Safety net so you will miss out on Netflix, etc.
No F/C's. Not sure on battery yet.
Everything else does seem good! I am enjoying it!
Click to expand...
Click to collapse
What is the reserve partition? And do I need it/want it?
cultofluna said:
You can use the reserve partition magisk module...
Click to expand...
Click to collapse
Do you have a link?
Scott said:
Do you have a link?
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=1899786940962618515
Scott said:
We still don't have the "reserve" partition though. OnePlus fonts will be missing and show up as italic fonts. A few apps are also gone but can be installed from play store. You wont pass Safety net so you will miss out on Netflix, etc.
No F/C's. Not sure on battery yet.
Everything else does seem good! I am enjoying it![/QUOTE @Scott , which apps are you referring to?
Sent from my ONEPLUS 6T using Tapatalk Pro.
If I've helped you out, please tap the thanks button.
Click to expand...
Click to collapse
xRogerxC said:
@Scott , which apps are you referring to?
Sent from my ONEPLUS 6T using Tapatalk Pro.
If I've helped you out, please tap the thanks button.
Click to expand...
Click to collapse
The OP Weather app for instance, the OP square and round icon packs, e few more that I dont recall. All of them could be downloaded from the play store. You only need the font fox magisk module referenced earlier in this thread. You wont notice these missing apps on a dirty install but you will see it on a clean install or factory reset.
Reinstalling the ROM ZIP via in-built updater fixes the issue. Done it multiple times.