Related
I have a new Galaxy Note 3 (having bricked one trying to understand why it wouldn't encrypt) and now with a full stock rom I still find that the phone is impossible to encrypt.
I have an encrypted SD card in it. (only thing I can think of that might be causing problems)..
Settings > General > Security > Encrypt Device keeps stopping after a single shutdown,
How the heck do I encrypt this thing?? - Am I missing the blindingly obvious..
Thanks
tahnoonp said:
I have a new Galaxy Note 3 (having bricked one trying to understand why it wouldn't encrypt) and now with a full stock rom I still find that the phone is impossible to encrypt.
I have an encrypted SD card in it. (only thing I can think of that might be causing problems)..
Settings > General > Security > Encrypt Device keeps stopping after a single shutdown,
How the heck do I encrypt this thing?? - Am I missing the blindingly obvious..
Thanks
Click to expand...
Click to collapse
I'm having the exact same issue. Encryption is requited to get my work email and I can't get it to go.
Finally got mine to encrypt
Took me a bunch of tries.. and finally once i opened a chat with samsung support it finally worked.. i was at 100% charge, plugged into the wall and if finally worked. not sure if thats a bug in its detection if your over the stated 80% or not... good luck.. i finally got it working though.. only did a fast encryption as it didn't work on previous tries either way... so i just chose one and tried it again.
tahnoonp said:
I have a new Galaxy Note 3 (having bricked one trying to understand why it wouldn't encrypt) and now with a full stock rom I still find that the phone is impossible to encrypt.
I have an encrypted SD card in it. (only thing I can think of that might be causing problems)..
Settings > General > Security > Encrypt Device keeps stopping after a single shutdown,
How the heck do I encrypt this thing?? - Am I missing the blindingly obvious..
Thanks
Click to expand...
Click to collapse
I have the Google Policy Manager and Encryption is required for me too. I started at 81% and the first time I did it, it just rebooted. The second time I did it it worked like it was suppose to. Try it again right after it reboots and see if it works.
Make sure the phone is charged and keep trying over and over.
It will work eventually.
I gave up. I'm using touchdown now for work email which will allow me to skip full device encryption
Sent from my SM-N900V using Tapatalk
Same problem here, it will not encrypt
....help please
This is the answer I found doing a couple of root and unroot
1.If you encrypt the device and then root it you will net get past the passcode in the phone (black screen)
2. If you root the phone first and ten try to encrypt you will get the problems mentioned in this thread
..any tips how to get the phone rooted and then encrypted?
greffel said:
This is the answer I found doing a couple of root and unroot
1.If you encrypt the device and then root it you will net get past the passcode in the phone (black screen)
2. If you root the phone first and ten try to encrypt you will get the problems mentioned in this thread
..any tips how to get the phone rooted and then encrypted?
Click to expand...
Click to collapse
Bump. I'm looking for this answer too.
digittante said:
Bump. I'm looking for this answer too.
Click to expand...
Click to collapse
anyone at all? im stuck. Bump!
was having a similar problem on nexus 4 but safe mode helped there.
dind't help on my new n3. shouldn't have rooted before encrypting.
tried pressing encrypt about 10 times.
tried boot into recovery + wipe . also tried safe mode. also tried unroot + factory reset (pretty sure recovery + wipe /data is the same as reset user data from settings).
waiting for the firmware image to download - decided to try a firmware reflash
and then before flashing it I tried rebooting to recovery and powering off and encrypting and it worked. or maybe it was that random 12th time it worked because of an unrelated reason.
and after trying to root it again it just booted to a black screen after cf-root and enter encryption password screen.
*sigh*
My Work-Around
svyr said:
and then before flashing it I tried rebooting to recovery and powering off and encrypting and it worked. or maybe it was that random 12th time it worked because of an unrelated reason.
and after trying to root it again it just booted to a black screen after cf-root and enter encryption password screen.
*sigh*
Click to expand...
Click to collapse
I'm an AT&T customer, but I bought a T Mobile Note 3 off of Craigslist, unlocked it, rooted using Chainfire's ODIN thread, and then used the RegionFree Lock Away app. I was unable to encrypt just like you guys until I did the following. Flashed TWRP tar file from the TWRP site using ODIN. Rebooted into recovery and made an image, backup up everything, just in case. Rebooted and went in the SU Superuser application that Chainfire originally installed and uninstalled through the settings in the program. Once I rebooted I was able to encrypt the device (without fast method), I already had my SD Card encrypted. Once I encrypted the device I downloaded Kingo Root at the advice of DesignGears and used the one click root application from the Kingo Root site (google it.) After I did that, I now have full root access back, encryption, and never had to uninstall the region lock, so I didn't lose phone connectivity, applications, or anything else during the process. I recommend using TitaniumBackup and syncing via Google Drive or Dropbox before you start the process so you can restore your apps and data, once again, just in case.
encrypted ATT Note 3 not able to root
I was able to unroot my ATT Note 3 and then encrypted it. But Kingo Root failed to root the device. (I used it to root the phone once previously)
Now I stuck in a status with encrypted phone not able to root anymore.
Any suggestions please?
GHolbrook4 said:
I'm an AT&T customer, but I bought a T Mobile Note 3 off of Craigslist, unlocked it, rooted using Chainfire's ODIN thread, and then used the RegionFree Lock Away app. I was unable to encrypt just like you guys until I did the following. Flashed TWRP tar file from the TWRP site using ODIN. Rebooted into recovery and made an image, backup up everything, just in case. Rebooted and went in the SU Superuser application that Chainfire originally installed and uninstalled through the settings in the program. Once I rebooted I was able to encrypt the device (without fast method), I already had my SD Card encrypted. Once I encrypted the device I downloaded Kingo Root at the advice of DesignGears and used the one click root application from the Kingo Root site (google it.) After I did that, I now have full root access back, encryption, and never had to uninstall the region lock, so I didn't lose phone connectivity, applications, or anything else during the process. I recommend using TitaniumBackup and syncing via Google Drive or Dropbox before you start the process so you can restore your apps and data, once again, just in case.
Click to expand...
Click to collapse
I was able to get mine to encrypt after killing the bloat apps. All Google sync, amazon, and Verizon services. I can't say which one was killing it since it stopped pretty much every app or service that wasn't critical to the device.
Can anyone confirm that Encryption will never work once we root our phone ?
nlatifolia said:
Can anyone confirm that Encryption will never work once we root our phone ?
Click to expand...
Click to collapse
Same question here... Anyone was able to encrypt after being rooted???
Same question, rooted can't encrypt.
Just got a note 3 and this is an old thread. So wanted to update this question.
To encrypt device after root all that is needed to do is run the following command from terminal or adb shell as root. You must have the latest busybox installed.
pkill -KILL daemonsu
After running this command you should be back at the "$" prompt and out of root. Do not run su again.
Then encrypt your device. Encryption should work fine. Once rebooted you will have root again.
I had to repeat the above steps because I ran su again. Running su restarts daemonsu.
Good luck
Hi,
I was able to root and encrypt my sm-n900 note3 using the steps mentioned on this post:
http://forum.xda-developers.com/showthread.php?t=2791587
Just make sure that you have your backups ready case something goes wrong
I've installed the bloatwares after rooting and encrypt.
Alright,
I'm running the MF9 stock firmware. this is my second S4 both were L720's. I rooted my first s4 in my sleep with the auto root/stock recovery, with Odin and the .tar file. I kept the files on my computer, since i have vast amounts of space and partially lazy; i didn't delete them. When i got my second s4 the firmware was MF9. So i flashed the tar with Odin, everything seem to work fine. no errors or hangs, when it booted back up to main menu it didn't have super user..
I downloaded the super user app, from the app store, said my binaries are out dated and needed update
okay, go for it.. everything was smooth/green other then the out dated version of superuser. but when it tried to get root access it failed
I used Odin to install openrecovery-twrp-2.6.3.0-jfltespr.tar everything was smooth
used adb to boot to recovery, worked great twrp booted up
i installed the superuser.zip from there
everything was smooth no errors /cleared the cache
rebooted still no super on my desktop/app drawer
I'm trying to avoid flashing stock rom then trying to re-root if any other possible way to root my device
would greatly help.
for all the people that say"google is ur friend" ever link is purple that starts or has the words "root" "superuser" "L720"
it is my friend but people are smarter and more dynamic then Google "my friend"
Thanks,
-L
Solved!! L720 cant install su superuser in recovery twrp/ cant gain root
Ive been working on this for the last two days, seems like all i needed was to post, i work in a support desk. Oddly alot of people have issues when they have been trying to fix, yet when they ask for help, there either figure it out. or it simply fixes its self
Well, i fix this issue my self
i used file manager and went to the /system/apps folder
my plan was to erase all traces of super user and re-install
when i got to super user
it wasn't like the normal icons, this one was different from the ones ive personally installed from the app store
so i installed it
it uninstalled the"app store" super users and installed this one.
(i have uninstalled super user previously before this and tried to flash with no success, hence the deeper clean)
It went about installing, and BAM!! asked me to grant super user control, i agreed to the prompt and opened up busy box
it finally loaded up correctly asked for super user access. I granted it
Issue resolved> idk why this was harder then before, but it works that's what matters, I know no one posted here, but hope this helps at lest one other person then me, Thanks XDA and all the programmers/theme'rs/developers
Does towel root method work on AN12 update. I have read the root methods for under AN12 but since this update has been out for a while now i thought maybe they got towel root to work.
Thank you in advance.
Sent from my GT-N5110 using XDA Premium HD app
Short answer is yes, however, you will need to ODIN your kernel first then gain root with towel root. Read this thread http://forum.xda-developers.com/showthread.php?t=2784860
Towelroot v3 refuses to install on Galaxy S5 from Verizon.
I'm having problems getting Towelroot v3 installed on my Verizon Wireless, Samsung Galaxy S5 16mb phone.
We were running fine while being rooted under V4.4.4 and Rom *NHA*.
We removed SuperSU, and uninstalled. it.
We installed the update, with no problems.
We rebooted, into Download mode, and flashed Kernel *NCG* .
We copied Towelrootv3 over and attempted to install it... (This is where the problem begins...)
We attempt to install TowelrootV3.apk. We get the popup that gives us the warning, along with the checkbox, we select the checkbox, which allows us to go ahead with the installation... the install begins but then suddenly says, "App not installed". (??????)
I have ensured that we are booted up under the NCG Kernel, and that we have selected:
Settings ->Security->Unknown Sources [ck'd]
Settings->Security->Verify Apps [Ck'd']
Developer Options->USB Debugging [not Ckk'd]
Developer Options->Allow Mock Locations [Chk'd]
No matter how many times that we try to install it, with different settings etc.... it fails with "App not installed!"
What could possibly be the reason that it refuses to install when we are using the *NCG* kernel?
I removed the NCG kernel and put the NK2 Kernel back in, and rebooted for the time being. It's working well, I just cannot get TowelrootV3 installed so that I can install SuperSU.
I've rooted another S5, using the very same procedure, and had absolutely no problems.
What am I doing wrong on this phone? It's driving me crazy, and I don' t have too far to go...:silly:
Thanks in Advance!
Please Help.
Stone.
stonecoldxlh said:
I'm having problems getting Towelroot v3 installed on my Verizon Wireless, Samsung Galaxy S5 16mb phone.
We were running fine while being rooted under V4.4.4 and Rom *NHA*.
We removed SuperSU, and uninstalled. it.
We installed the update, with no problems.
We rebooted, into Download mode, and flashed Kernel *NCG* .
We copied Towelrootv3 over and attempted to install it... (This is where the problem begins...)
We attempt to install TowelrootV3.apk. We get the popup that gives us the warning, along with the checkbox, we select the checkbox, which allows us to go ahead with the installation... the install begins but then suddenly says, "App not installed". (??????)
I have ensured that we are booted up under the NCG Kernel, and that we have selected:
Settings ->Security->Unknown Sources [ck'd]
Settings->Security->Verify Apps [Ck'd']
Developer Options->USB Debugging [not Ckk'd]
Developer Options->Allow Mock Locations [Chk'd]
No matter how many times that we try to install it, with different settings etc.... it fails with "App not installed!"
What could possibly be the reason that it refuses to install when we are using the *NCG* kernel?
I removed the NCG kernel and put the NK2 Kernel back in, and rebooted for the time being. It's working well, I just cannot get TowelrootV3 installed so that I can install SuperSU.
I've rooted another S5, using the very same procedure, and had absolutely no problems.
What am I doing wrong on this phone? It's driving me crazy, and I don' t have too far to go...:silly:
Thanks in Advance!
Please Help.
Stone.
Click to expand...
Click to collapse
Check enable USB debugging and see if it works.
stonecoldxlh said:
I'm having problems getting Towelroot v3 installed on my Verizon Wireless, Samsung Galaxy S5 16mb phone.
We were running fine while being rooted under V4.4.4 and Rom *NHA*.
We removed SuperSU, and uninstalled. it.
We installed the update, with no problems.
We rebooted, into Download mode, and flashed Kernel *NCG* .
We copied Towelrootv3 over and attempted to install it... (This is where the problem begins...)
We attempt to install TowelrootV3.apk. We get the popup that gives us the warning, along with the checkbox, we select the checkbox, which allows us to go ahead with the installation... the install begins but then suddenly says, "App not installed". (??????)
I have ensured that we are booted up under the NCG Kernel, and that we have selected:
Settings ->Security->Unknown Sources [ck'd]
Settings->Security->Verify Apps [Ck'd']
Developer Options->USB Debugging [not Ckk'd]
Developer Options->Allow Mock Locations [Chk'd]
No matter how many times that we try to install it, with different settings etc.... it fails with "App not installed!"
What could possibly be the reason that it refuses to install when we are using the *NCG* kernel?
I removed the NCG kernel and put the NK2 Kernel back in, and rebooted for the time being. It's working well, I just cannot get TowelrootV3 installed so that I can install SuperSU.
I've rooted another S5, using the very same procedure, and had absolutely no problems.
What am I doing wrong on this phone? It's driving me crazy, and I don' t have too far to go...:silly:
Thanks in Advance!
Please Help.
Stone.
Click to expand...
Click to collapse
Uncheck verify apps.
Sent from my SM-G900A using Tapatalk
Problem fixed... working now, successfully Rooted
Well,
I found that if you do not copy the towelroot.apk to your internal memory, it will not allow you to install towelroot.
Instead of Downloading towelroot.apk from the website from the phone itself, I downloaded it onto my PC. Then connected my phone to my pc, and placed it into "Access Picture" mode so that you can upload and download pictures into the phone's internal memory. I used that mode to copy towelroot from my pc to the phone.
I used Odin3 to load up NGC Kernel.
Then I disconnected from my pc, rebooted the phone, and was able to install towelroot with no further warnings.
Once that was done, I was able to use Odin3 again to load back up the NK2 original Kernel. I then rebooted again,
and then I could "Make it Rain". After a nice summer rainstorm, I was able to install SuperSU from Google Playstore and install it.
I sure hope that when 5.0 comes to our Verizon Android S5 phones, it's equally as easy to get root access as it has been for 4.4.4. I would surely be hindered without it as my phone relies upon a lot of apps that require root access. Unless Verizon changes their ways, this will be the last Samsung Galaxy I will ever purchase, so that I can move over to a Nexus device.
Thanks to everyone who has stepped up and helped us keep our phones productive and rooted.
Cheers,
-Stone
:good:
Hello.
My Galaxy S4 was dying so T-Mobile just replaced it with an S5. It came with:
LMY47X.G900TUVS1FOJ4
I clicked on Software updates in About device and it did whatever updates, but the version stayed the same. Then I went to autoroot [dot] chainfire [dot] eu and downloaded the correct file to root. I unzipped the file and ran Odin 3.10.6 that came with it. I was able to root the device no problem.
What seemed like a problem afterward was that I couldn't find SuperSU in the Application list. I know the phone was rooted though because I could launch Titanium Backup to restore all my stuff from the S4. I went to the Play Store to download SuperSU. It kept complaining that I needed a new binary, but it would fail every time to update. I even tried downloading the latest SuperSU zip to install in the recovery mode, but that failed too. I really wasn't too worried about this.
While looking up how to root the S5, I saw some posts where people mentioned their root access stopped after 24 hours. I just experienced this when I launched Titanium Backup to begin uninstalling bloatware. I was informed that I didn't have root access anymore.
I figured I'd try to reflash the auto-root through Odin. According to Odin, everything passed, but looking at the device, it said it's already patched and the restore failed, so it aborted.
Now the device is stuck in an infinite reboot loop. I can access both the download and recovery modes, but that's it.
I'd really really like to not have to do a factory wipe as it was a pain to get everything copied over from the S4.
Can I flash it with something else?
Once I can get back in the device, how do I keep the device rooted? Do I have to flash TWRP or CWM?
The only root program I use is Titanium Backup and would really really like to keep using it to makr regular backups.
Thanks a lot.
Try booting into recovery and wiping the CACHES
If it still won't boot, grab a stock ROM from sammobile .com for your model S5 (G900T by the looks of the ROM name) and flash it with ODIN from download mode
That won't wipe your data or anything you've restored, as long as you don't reset
If it still won't boot, you might have to suck it up and factory reset after flashing stock
Was the TiBu backup you restored, rooted? Maybe restoring the backup restored an old version of SuperSU and broke the CF AR version
Might need to go down the TWRP and SuperSU from TWRP recovery route to get it rooted properly if CF AR isn't woprking 100%, which it doesn't for a fair few people
I tried clearing the cache, but that didn't work.
Is there a way to download the stock ROM without having to create an account on the download site?
The Titanium Backup I restored was rooted. Everything was totally fine, until I went back to TB and it suddenly told me I wasn't rooted anymore.
I did try TWRP after I made the original post. I think messed up the device, but I can get in now. I flashed the latest version and booted into Recovery Mode. I clicked on Fix Permissions and possibly one other thing. It let booted farther before the infinite bootloop. It'd show my lock screen and give me 1-2 seconds before rebooting. If I swiped quickly, I could see the home screen with most of my icons gone. Clicked on Apps shows most of the apps are gone. When I removed the SIM card, I stopped getting the infinite bootloop. Here are the list of important programs I have left:
Contacts (all cleared out), Gallery (all present), Messages (all present), My Files (shows files from previously installed programs that I can no longer access), Phone (works when I put the SIM card back in), Settings
Unfortunately, TB and the Play Store are both gone. I might be able to install stuff using adb or by copying files over. I haven't tried, but it doesn't look good. I tried reflashing the CF ROM. It didn't change anything. I suspect I may be looking at a factory reset at this point. I'm happy to try any other suggestions.
Thank you.
whynoteel said:
Is there a way to download the stock ROM without having to create an account on the download site?
Click to expand...
Click to collapse
Wut? lol, just make one, it's free...
XDA does not spoon feed
I created an account and downloaded the stock ROM. I flashed the device and got most of the programs to appear again though the Play Store was still missing. I decided to cut my losses and just do a factory reset. I rooted again and put everything back in place. Now I'm experiencing the problem where I lost root after a day or so of use. I'll start a new thread.
Thanks for your help.
I've tried various root methods without success, last one worked BUT was unable to access the play store, "my files" section or the basic package installer, making it imposible to disable the knox security log for the notification issue and everytime I successfuly root it I can install busybox, supersu and root checker but beyond that I am unable to proceed further. When I restarted the phone it stays stuck in the att boot logo while vibrating from 2-3 times on a loop.
From that point on I have to wipe memory/cache and start all over again...
I Started up the phone without supersu but even that it has factory reset, there is lag from the phone.
anyone help?
I'll post device info
there's also a problem I found myself trying to fix the first problems after rooting it was a "dm-vareity verification" problem, son't know if I spelled correctly but that was basically what it said
Thanks In Advanced. :laugh: