help! i have flashed UL-Z00L-WW-1.17.40.1234-user but im stock on android optimizing always reboot endless reboot
now i downloaded UL-Z00L-WW-20.40.1220.1708-user, but im only stock on verifying package and sometimes aborted status : error 7 please hep!
ehl.ey14 said:
help! i have flashed UL-Z00L-WW-1.17.40.1234-user but im stock on android optimizing always reboot endless reboot
now i downloaded UL-Z00L-WW-20.40.1220.1708-user, but im only stock on verifying package and sometimes aborted status : error 7 please hep!
Click to expand...
Click to collapse
Did you wipe cache/factory reset after flashing?
abhi007.john said:
Did you wipe cache/factory reset after flashing?
Click to expand...
Click to collapse
yes i did :3 after i flash 1.17 firmware its okay for 3 hours now its random bootloop again
i have flashed UL-Z00L-WW-1.17.40.1234-user but im stock on android optimizing always reboot endless reboot
now i downloaded UL-Z00L-WW-20.40.1220.1708-user, but im only stock on verifying package and sometimes aborted status : error 7 please hep!
I have the same problem.....my phone is working properly but i get stuck on lollipop.....not flashing any rom.....even flashing of gapps shows error 7 too....pls help......i dont want to get stuck on lollipop
you may need to flash the MM baseband
Related
My I9505 is in a boot loop after rooting it today.
The problem occurred when I was trying to NAND backup through CWM. When the process got to "/system" a very generic error appeared, just letting me know there was an error.
After that I decided to reboot from recovery and it was stuck on the Samsung logo
I can still get into recovery but I don't have the stock ROM.
Any help is appreciated.
savl0n said:
My I9505 is in a boot loop after rooting it today.
The problem occurred when I was trying to NAND backup through CWM. When the process got to "/system" a very generic error appeared, just letting me know there was an error.
After that I decided to reboot from recovery and it was stuck on the Samsung logo
I can still get into recovery but I don't have the stock ROM.
Any help is appreciated.
Click to expand...
Click to collapse
did you try wiping data and cache then reboot?
You can download stock firmwares from sammobile.com
Sent from my GT-I9505 using Tapatalk 4 Beta
samersh72 said:
did you try wiping data and cache then reboot?
Click to expand...
Click to collapse
I haven't tried that, I'll try that now.
A very strange issue has happened since the boot loop. It actually booted but the status bar was the only thing to show. no apps were avaliable and the background was just black.
samersh72 said:
did you try wiping data and cache then reboot?
Click to expand...
Click to collapse
EDIT: on reboot after wiping data and cache it asks for root, then when you select yes or no nothing happens
the splash screen now freezes
well guys help me out i am stuck in jeopardy
my device got soft brick i can boot into recovery but it is stuck on Google logo
what i did is tried to install flashable zip of 4.4.2 on 4.4 device nexus 7 wifi via CWM Recovery
it gave me Status 7 error
so when i restarted the device i got the message device not rooted click Yes to get root access so i selected that and since after that it got stuck on GOOGLE LOGO
so i restarted the device and tried flashing 4.4 kit zip it also gave the same error STATUS 7
even tried clearing DALVIK cache and wipe data / factory reset
couldnt get it Booted to OS
So Kindly give me the solution so i can Upgrade to 4.4.2 and get unbricked from this
Thanks in advance
Regards
SM-N9005 is soft bricked, owner probably went OTA and interrupted the update now when you turn on the phone it goes to the Samsung Galaxy Note 3 logo then loops from there. I tried to flash official stock firmware downloaded from Sammobile (N9005XXUEND6_N9005OLBEND1_XTC) and it passed the flash in ODIN 3.09 then the phone automatically reboots into stock recovery and tries to update package but from I keep getting:
E: Unable to verify whole file signature
E: Signature verification failed
Installation aborted
I have been flashing firmwares on older Samsung via ODIN and as far as I know after flashing via ODIN the firmware is already written in the phone and it doesn't need to reboot into recovery and flash the update again but in NOTE3 it does this and now I'm stuck.
I tried flashing PhilZ custom recovery and disabled signature verification but when I flash the stock firmware via ODIN it overwrites the custom recovery back to stock recovery and then gets stuck again in the verifying signature thing.
Any help and inputs would be greatly appreciated.
re: factory data reset
bcsiy said:
SM-N9005 is soft bricked, owner probably went OTA and interrupted the update now when you turn on the phone it goes to the Samsung Galaxy Note 3 logo then loops from there. I tried to flash official stock firmware downloaded from Sammobile (N9005XXUEND6_N9005OLBEND1_XTC) and it passed the flash in ODIN 3.09 then the phone automatically reboots into stock recovery and tries to update package but from I keep getting:
E: Unable to verify whole file signature
E: Signature verification failed
Installation aborted
I have been flashing firmwares on older Samsung via ODIN and as far as I know after flashing via ODIN the firmware is already written in the phone and it doesn't need to reboot into recovery and flash the update again but in NOTE3 it does this and now I'm stuck.
I tried flashing PhilZ custom recovery and disabled signature verification but when I flash the stock firmware via ODIN it overwrites the custom recovery back to stock recovery and then gets stuck again in the verifying signature thing.
Any help and inputs would be greatly appreciated.
Click to expand...
Click to collapse
If you can get into recovery why not try to do a
"Factory Reset", it may solve your problems.
Good luck!
Misterjunky said:
If you can get into recovery why not try to do a
"Factory Reset", it may solve your problems.
Good luck!
Click to expand...
Click to collapse
I tried to do a factory reset in stock recovery, tried wiping the Dalvik cache as well but the problem is still there it just stays on the Samsung Galaxy Note 3 screen then turns off then turns back on and loops over and over.
bcsiy said:
I tried to do a factory reset in stock recovery, tried wiping the Dalvik cache as well but the problem is still there it just stays on the Samsung Galaxy Note 3 screen then turns off then turns back on and loops over and over.
Click to expand...
Click to collapse
Either nuke the phone via a totally fresh ODIN update or flash Philz recovery, when it loops on you, take out the battery, put it back in then go to recovery mode, wipe the usual dalvik/cache etc then boot up (it should in theory work) (and/or flash a custom ROM just to get it to boot properly)
radicalisto said:
Either nuke the phone via a totally fresh ODIN update or flash Philz recovery, when it loops on you, take out the battery, put it back in then go to recovery mode, wipe the usual dalvik/cache etc then boot up (it should in theory work) (and/or flash a custom ROM just to get it to boot properly)
Click to expand...
Click to collapse
Thanks for the input, the main issue why I need to flash the stock rom is because the phone doesn't boot and is looping in the Samsung Galaxy Note 3 screen then vibrates as if it turns on again and goes into a loop...
Question is can I flash a custom rom over it for example there's no firnware loaded on the phone or the firmware loaded is corrupted?
You can flash a custom ROM yes, so long as you boot Into your custom recovery, do the wipes. Then installing a custom fw should work OK, once you've done that you can go back to stock or change custom fw without issues
I'm UBER Paranoid
bcsiy said:
SM-N9005 is soft bricked, owner probably went OTA and interrupted the update now when you turn on the phone it goes to the Samsung Galaxy Note 3 logo then loops from there. I tried to flash official stock firmware downloaded from Sammobile (N9005XXUEND6_N9005OLBEND1_XTC) and it passed the flash in ODIN 3.09 then the phone automatically reboots into stock recovery and tries to update package but from I keep getting:
E: Unable to verify whole file signature
E: Signature verification failed
Installation aborted
I have been flashing firmwares on older Samsung via ODIN and as far as I know after flashing via ODIN the firmware is already written in the phone and it doesn't need to reboot into recovery and flash the update again but in NOTE3 it does this and now I'm stuck.
I tried flashing PhilZ custom recovery and disabled signature verification but when I flash the stock firmware via ODIN it overwrites the custom recovery back to stock recovery and then gets stuck again in the verifying signature thing.
Any help and inputs would be greatly appreciated.
Click to expand...
Click to collapse
The reason it wants to boot into recovery is to flash the csc. Make sure you get the correct firmware for your device and region from sammobile.com and odin again, let it do its thing. It sounds like the csc wasn't valid.
Sent from my leanKernel 2.5 powered stock 4.4.2 SM-N900T
So, even after I flash the stock rom with odin, it starts then at setup a bunch of "this app has stopped working" errors and cant access the system, I even tried flashing a bunch of custom roms(through TWRP since I can use odin no problem) and they all get stuck on the logo(waited for an hour before flashing a different one) Dont know what to do.
After flashing the stock rom and accesing the stock recovery i get a "Unable to mount /efs Invalid comand" error
Has anyone faced a similar problem
EDIT: after about 20 mins, the boot logo animation gets really slow (for any custom rom) but it never gets passed that
aaronus23 said:
So, even after I flash the stock rom with odin, it starts then at setup a bunch of "this app has stopped working" errors and cant access the system, I even tried flashing a bunch of custom roms(through TWRP since I can use odin no problem) and they all get stuck on the logo(waited for an hour before flashing a different one) Dont know what to do.
After flashing the stock rom and accesing the stock recovery i get a "Unable to mount /efs Invalid comand" error
Has anyone faced a similar problem
EDIT: after about 20 mins, the boot logo animation gets really slow (for any custom rom) but it never gets passed that
Click to expand...
Click to collapse
What is the model of your phone?
aaronus23 said:
So, even after I flash the stock rom with odin, it starts then at setup a bunch of "this app has stopped working" errors and cant access the system, I even tried flashing a bunch of custom roms(through TWRP since I can use odin no problem) and they all get stuck on the logo(waited for an hour before flashing a different one) Dont know what to do.
After flashing the stock rom and accesing the stock recovery i get a "Unable to mount /efs Invalid comand" error
Has anyone faced a similar problem
EDIT: after about 20 mins, the boot logo animation gets really slow (for any custom rom) but it never gets passed that
Click to expand...
Click to collapse
Flash official frimware through odin them open recovery (official recovery) wipe cache then wipe data / factory reset then restart the phone
tasnim_tamim said:
What is the model of your phone?
Click to expand...
Click to collapse
Hi!, its a SM-G531h
ealam said:
Flash official frimware through odin them open recovery (official recovery) wipe cache then wipe data / factory reset then restart the phone
Click to expand...
Click to collapse
Tried, still same results
aaronus23 said:
Hi!, its a SM-G531h
Click to expand...
Click to collapse
I think you did some changes to your device that made the efs partition corrupt. I think the only thing you can do is take your device to Samsung to get it fixed. I am sure that the efs partition is causing the issues.
tasnim_tamim said:
I think you did some changes to your device that made the efs partition corrupt. I think the only thing you can do is take your device to Samsung to get it fixed. I am sure that the efs partition is causing the issues.
Click to expand...
Click to collapse
yeah, I figured as much
Hey, look
Install the official firmware (stock firmware) via Odin, then turn off your phone
Then, go to the stock recovery and wipe cash and data
And finally, turn on youe phone
If it doesn't boot up (stuck at bootloader)
Remove your battery and try again
You're welcome
Hi iam a bad guy i tried to do use aosp extended rom
So i tryed to get on my moto g5pluse i root it installed twrp installed magisk then i stared to install aosp extended procces in twrp recovery mode i wipe up the data,chace,then i start to install the zip throuh twrp in recovery mode i click the file an swipe to start the installation an :laugh:i shows the error 255 :cyclops: ok it get error i tryed to install the zip again but it stucked again error255 ok i wont happed no problen but when i tryed to start the phone it stucked on rooted window it not starting too iam stuck
Plz if u can help plz help
Update twrp to the latest. Format data partition. Try flashing some other rom if aosp doesn't flash.