Help with emmaus modified flyme rom and flyme recovery - Meizu MX

Hello. I had installed carbon rom in my MX4 for 3 months with no problems, but i decided to install 5.1.5.0 G emmaus rom, and when i finished to install it, i saw that it changed my twrp to flyme recovery. I mean, i got 5.1.5.0 G modified flyme rom but whith flyme recovery instead twrp. What should i do to flash twrp? I dont know if i have locked or unlocked bootloader.
If is is locked and try to flash twrp whith fastboot, i will brick my mx4?
How can i check if my bl is locked or unlocked?
Thanks in advance

I had exactly the same situation. I did flash twrp recovery by fastboot. Everything works good.
Wysłane z mojego MX4

Ok, thanks for your help! I will flash twrp by fastboot.

wojted said:
I had exactly the same situation. I did flash twrp recovery by fastboot. Everything works good.
Wysłane z mojego MX4
Click to expand...
Click to collapse
Done!i flashed twrp by fastboot and all was fine. Thanks
Enviado desde mi MX4 mediante Tapatalk

juancargarcia84 said:
Done!i flashed twrp by fastboot and all was fine. Thanks
Enviado desde mi MX4 mediante Tapatalk
Click to expand...
Click to collapse
Hello, what is exactly the emmaus modified flyme. Where can I find it?

Related

From Custom Rom to Flyme Official?

Hey guys,
so just in case I would sell my phone in future .. I would know how to get back to full official Flyme Rom with locked bootloader and meizu stock recovery. In the cm12.1 thread is one tutorial in the headpost but I've read the comments in the thread and now I do not know what is right and what is wrong to get back official Flyme Rom. Please, can someone tell me how I get this done, PLEASE
You have to flash patched recovery flyme, and then flash original flyme rom by normal way( recovery mode or choosing the rom with a file explorer)
Enviado desde mi MX4 mediante Tapatalk
And that is the safest way?
As i know, is the only way, if we are talking about andriod mx4. I did it and no problems.
The safest way to flash patched rechovery is via fastboot.
Enviado desde mi MX4 mediante Tapatalk
move offical rom to root direc. and flash patced recovery. turn off phone. press volume up + power button. select update and clean data.
OK thanks guys
LemonJuls said:
OK thanks guys
Click to expand...
Click to collapse
Wait you can brick your phone. Some people have tested it:
- Back to Flyme 4.2.8.2 patched
- Reflash Flyme 4.2.8.2 official
- Full Re-Lock
IF YOU FLASH ANOTHER FLYME (NOT 4.2.8.2) OFFICIAL IS FULL BRICK.
Naphtha said:
Wait you can brick your phone. Some people have tested it:
- Back to Flyme 4.2.8.2 patched
- Reflash Flyme 4.2.8.2 official
- Full Re-Lock
IF YOU FLASH ANOTHER FLYME (NOT 4.2.8.2) OFFICIAL IS FULL BRICK.
Click to expand...
Click to collapse
Ok, first flash patched recovery, then 4.2.8.2 ( I or A?) and then I can flash any official Rom without brick?
LemonJuls said:
Ok, first flash patched recovery, then 4.2.8.2 ( I or A?) and then I can flash any official Rom without brick?
Click to expand...
Click to collapse
Some people have tested it! But i'm not sure! You coming from an A or I? What you have patched for unlock?
Coming from 4.2.8.2A but phone is actually a international model...
LemonJuls said:
Coming from 4.2.8.2A but phone is actually a international model...
Click to expand...
Click to collapse
You can try, but why? Just sell it unlocked
Dear friends,
You all say that the first step should be flashing the custom recovery, but how? With flashify?
Thanks.
@juancargarcia84 did your coming back to flyme work ? how did you do it ? ?
Mulic said:
Dear friends,
You all say that the first step should be flashing the custom recovery, but how? With flashify?
Thanks.
Click to expand...
Click to collapse
You can do it via fastboot :)
Inviato dal mio MX4 utilizzando Tapatalk
Naphtha said:
You can do it via fastboot :)
Inviato dal mio MX4 utilizzando Tapatalk
Click to expand...
Click to collapse
Thanks man. How do one does it via fastboot?
Mulic said:
Thanks man. How do one does it via fastboot?
Click to expand...
Click to collapse
Volume Down + Power = Fastboot mode
In a Prompt of comand do: fastboot flash recovery "recovery.img" (and move recovery file on window and do enter)
An example: https://www.youtube.com/watch?v=CtYNtT07QrM
Naphtha said:
Volume Down + Power = Fastboot mode
In a Prompt of comand do: fastboot flash recovery "recovery.img" (and move recovery file on window and do enter)
An example: https://www.youtube.com/watch?v=CtYNtT07QrM
Click to expand...
Click to collapse
Thanks so much! Is it safer than flashing with flashify?
After I do it, and after I go back to the official 4.2.8.2, can I update it normally to 4.5.7i, or even to flyme 5 when it comes out, or will I risk brick?
Thanks again.
Naphtha said:
Some people have tested it! But i'm not sure! You coming from an A or I? What you have patched for unlock?
Click to expand...
Click to collapse
I flashed 4.2.8.2 with patched recovery and patched ROM with patched uboot (same as what got me "unlocked")
After that flashed full unmodified 4.2.8.2, let boot, rebooted for good measure then flashed latest flyme 5
Sent from my MX4 using XDA Free mobile app
FrAsErTaG said:
I flashed 4.2.8.2 with patched recovery and patched ROM with patched uboot (same as what got me "unlocked")
After that flashed full unmodified 4.2.8.2, let boot, rebooted for good measure then flashed latest flyme 5
Sent from my MX4 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for sharing from your experience! Did you flashed the flyme 5 normally, the standard way, by just putting it on root and openning? Where did you get it? So many different versions. How do you like it?
Thanks again.
Naphtha said:
Wait you can brick your phone. Some people have tested it:
- Back to Flyme 4.2.8.2 patched
- Reflash Flyme 4.2.8.2 official
- Full Re-Lock
IF YOU FLASH ANOTHER FLYME (NOT 4.2.8.2) OFFICIAL IS FULL BRICK.
Click to expand...
Click to collapse
"Flyme 4.2.8.2 patched" - You say that I must flash patched Flyme 4.2.8.2 or flash a stock Flyme 4.2.8.2i by patched recovery and than by stock?? On this I can install Flyme 4.5.7 and update it with OTA?

[Firmware] 4.0.2 Firmware flashable update zip

Just grabbed the firmware files from the latest 4.0.2 release (same pack as someone else uploaded for 4.0.1, I just replaced the files with the newer versions.
Here is the 4.0.2 :
https://www.androidfilehost.com/?fid=673368273298924614
Here is the 4.0.1 if you decide to go back:
https://www.androidfilehost.com/?fid=529152257862696316
So far I've noticed a marked improvement in GPS satellite detection, it's almost instant (I'm on official RR and it had been mentioned so folks on RR might want to try it for that reason).
Wow this is great. Cause gps is kinda bad....
Can i flash this thru TWRP? Im on oos 4.0.1.
binopech said:
Can i flash this thru TWRP? Im on oos 4.0.1.
Click to expand...
Click to collapse
If you're already on OOS, why not just update the ROM to OOS 4.0.2 instead of only updating the firmware?
jbw716 said:
If you're already on OOS, why not just update the ROM to OOS 4.0.2 instead of only updating the firmware?
Click to expand...
Click to collapse
Will dirty flash later the full rom. ?
I Just can flash it over RR ?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
djsubterrain said:
Just grabbed the firmware files from the latest 4.0.2 release (same pack as someone else uploaded for 4.0.1, I just replaced the files with the newer versions.
Here is the 4.0.2 :
https://www.androidfilehost.com/?fid=673368273298924614
Here is the 4.0.1 if you decide to go back:
https://www.androidfilehost.com/?fid=529152257862696316
So far I've noticed a marked improvement in GPS satellite detection, it's almost instant (I'm on official RR and it had been mentioned so folks on RR might want to try it for that reason).
Click to expand...
Click to collapse
it same with full oos 4.0.2download ??
t0pstar said:
I Just can flash it over RR ?
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Click to expand...
Click to collapse
Yes, that's what I did
After flash 4.0.2 firmware i have dm-verity error.
Wysłane z mojego ONEPLUS A3003 przy użyciu Tapatalka
sledziupb said:
After flash 4.0.2 firmware i have dm-verity error.
Wysłane z mojego ONEPLUS A3003 przy użyciu Tapatalka
Click to expand...
Click to collapse
That's a common issue and not related to the firmware, try installing the latest version of TWRP from their website, it was just updated yesterday, there's plenty of posts about dm-verity.
djsubterrain said:
That's a common issue and not related to the firmware, try installing the latest version of TWRP from their website, it was just updated yesterday, there's plenty of posts about dm-verity.
Click to expand...
Click to collapse
My twrp version is 3.0.3-1 release from twrp.me site.
Error showed up after flash firmware not before. I flashed in twrp 3.0.3-1.
I have RR remix Rom.
Wysłane z mojego ONEPLUS A3003 przy użyciu Tapatalka
sledziupb said:
My twrp version is 3.0.3-1 release from twrp.me site.
Error showed up after flash firmware not before. I flashed in twrp 3.0.3-1.
I have RR remix Rom.
Wysłane z mojego ONEPLUS A3003 przy użyciu Tapatalka
Click to expand...
Click to collapse
You must have made a mistake while unlocking your bootloader then, I'm not getting any issue and I'm on the same platform as you (3.0.3-1 and RR), no one else has made any similar comment either (It's been downloaded and presumably installed 72 times). Did you follow the guide in the TWRP thread? (Wipe data partition, etc)
Does this latest firmware still trip the DM-Verity error on boot?
djsubterrain said:
You must have made a mistake while unlocking your bootloader then, I'm not getting any issue and I'm on the same platform as you (3.0.3-1 and RR), no one else has made any similar comment either (It's been downloaded and presumably installed 72 times). Did you follow the guide in the TWRP thread? (Wipe data partition, etc)
Click to expand...
Click to collapse
What mistake? Fastboot OEM unlock that's all. After Than fastboot flash recovery twrp.img. Previously i was do adb sideload Because dm-verity Was show on Oxygen 4.0 when I rooted Rom. When dm-verity gone i flashed RR remix on twrp 3.0.3-0. Everything Was ok. Yesterday a flashed twrp 3.0.3-1 and newest RR remix. Today i flashed 4.0.2 firmware and wrrr dm-verity error showed up. . I will backup this Rom Than i will try flash Oxygen 4.0.2 full an twrp 3.0.3-1 or adb sideload.
Wysłane z mojego ONEPLUS A3003 przy użyciu Tapatalka
A Sad Napkin said:
Does this latest firmware still trip the DM-Verity error on boot?
Click to expand...
Click to collapse
Not for me although I had managed to get rid of it on 4.0.1 so I couldn't promise anything.
After sideload full 4.0.2 dm-verity error gone.
Wysłane z mojego ONEPLUS A3003 przy użyciu Tapatalka
@djsubterrain in twrp is says 4.01 when I flash it so is it 4.01 or 4.02 ?
CroW_D said:
@djsubterrain in twrp is says 4.01 when I flash it so is it 4.01 or 4.02 ?
Click to expand...
Click to collapse
It should be 4.0.2 cos it's the files from that release, did you get any errors when flashing? Remember, it's not the full 4.0.2 rom so if you're running the OOS 4.0.1 you should really just run the official update, to be honest these files were just for when it first came out, any more recent custom roms should now include this new firmware in them, if you're running a custom rom.
djsubterrain said:
It should be 4.0.2 cos it's the files from that release, did you get any errors when flashing? Remember, it's not the full 4.0.2 rom so if you're running the OOS 4.0.1 you should really just run the official update, to be honest these files were just for when it first came out, any more recent custom roms should now include this new firmware in them, if you're running a custom rom.
Click to expand...
Click to collapse
Yeah running aosip now don't know if its included allready. Just want to make sure I am on the latest cause I have some touch latency issues and I heard its better with the latest firmware and modem.

Need help restoring stock backup image in Magisk,error "stock backup does not exist!"

Need help restoring stock backup image in Magisk,error "stock backup does not exist!"
I'm trying to get the newest January update for my Magisk rooted A1. But as im trying to restore my original backup i encounter the "stock backup image does not exist!" error in the Magisk Manager app. Please help me solve this problem thoroughly as i am an amateur. Thanks!
You have to download and flash the stock boot of December or the version you are.
Enviado desde mi Mi A1 mediante Tapatalk
AridaneAM said:
You have to download and flash the stock boot of December or the version you are.
Enviado desde mi Mi A1 mediante Tapatalk
Click to expand...
Click to collapse
Where do i download the december boot.img and how do i flash it? Can i put it in magisk's backup boot.img directory and if so where do i put it exactly?
arief0303 said:
Where do i download the december boot.img and how do i flash it? Can i put it in magisk's backup boot.img directory and if so where do i put it exactly?
Click to expand...
Click to collapse
You can search in forums or download your complete ROM. I think that is easier flash complete January ROM keeping userdata and you will directly with update and without root.
Enviado desde mi Mi A1 mediante Tapatalk
...

Which twrp to install?

I found at least 3 twrp for mi a1 (tissot)
https://forum.xda-developers.com/mi-a1/development/recovery-twrp-3-1-1-0-touch-recovery-t3688472
https://forum.xda-developers.com/mi-a1/development/rom-lineage-16-0-t3831780
https://twrp.me/xiaomi/xiaomimia1.html
This one https://www.google.co.il/amp/s/foru...e-twrp-installer-treble-manager-t3793637/amp/ I know it isn't in the list but it's the best one
CosmicDans twrp!
Deriquest said:
I found at least 3 twrp for mi a1 (tissot)
https://forum.xda-developers.com/mi-a1/development/recovery-twrp-3-1-1-0-touch-recovery-t3688472
https://forum.xda-developers.com/mi-a1/development/rom-lineage-16-0-t3831780
https://twrp.me/xiaomi/xiaomimia1.html
Click to expand...
Click to collapse
Dont need to install twrp only to boot it
kutulu32 said:
Dont need to install twrp only to boot it
Click to expand...
Click to collapse
but why not install it? also cosmicdan's features dont stay if u dont flash it

How to remove Bootloader Warning Logo on G975F S10Plus

Hi. I rooted my Samsung S10 plus G975F and now want to remove bootloader/root warning logo at start. I was unable to find the BL file for S10 plus on this forum hence requesting help. I'm not a super user hence will really appreciate if steps could be shared on how to do it. Thanks
It's not my work.. it's from SoldieR9312, works good, found this solution here on xda., flash in twrpView attachment G97X_Splash_Screen_Changer_by_SoLdieR9312_splash.zip
Enviado desde mi SM-G975F mediante Tapatalk
hleo114312 said:
It's not my work.. it's from SoldieR9312, works good, found this solution here on xda., flash in twrpView attachment 4983141
Enviado desde mi SM-G975F mediante Tapatalk
Click to expand...
Click to collapse
When I installed LineageOS I followed the instructions on the LineageOS website and so I ended up with the LineageOS recovery instead of TWRP.
Is there any way to flash this with the LineageOS recovery instead of TWRP?

Categories

Resources