Related
I noticed today when I was outside that it was hard to see my screen because I always keep it at the lowest brightness level.
I bumped it up to the max so I can see easier.
I tried out auto brightness immediately after and it was much brighter than the brightest stock setting.
TMYK
That's odd, so you're saying if you put it on the highest setting with manually configured brightness, it still won't go as high as auto brightness in a situation where its needed (like direct sunlight)?
I personally use the auto brightness anyway but that's interesting to know...
sj_martin said:
I noticed today when I was outside that it was hard to see my screen because I always keep it at the lowest brightness level.
I bumped it up to the max so I can see easier.
I tried out auto brightness immediately after and it was much brighter than the brightest stock setting.
TMYK
Click to expand...
Click to collapse
That's weird as hell lmao. I'll test it tomorrow with sun. Will be SO upset if its true. YOU BETTER HOPE UR WRONG lol.
sj_martin said:
I noticed today when I was outside that it was hard to see my screen because I always keep it at the lowest brightness level.
I bumped it up to the max so I can see easier.
I tried out auto brightness immediately after and it was much brighter than the brightest stock setting.
TMYK
Click to expand...
Click to collapse
yeah i noticed that too. auto bright seems to go higher than the regular brightest setting.
If that's true, is there a way to manually increase the brightness to max?,
you know, similar to increasing the volume values?
Maybe someone can try it
gsvnet said:
That's odd, so you're saying if you put it on the highest setting with manually configured brightness, it still won't go as high as auto brightness in a situation where its needed (like direct sunlight)?
I personally use the auto brightness anyway but that's interesting to know...
Click to expand...
Click to collapse
yes, exactly.
the auto brightness probably kicks into outdoor visibility level.
Dose your phone say at the lowest light level. Because mine, even after I set it to the lowest level, moves to a brighter level.
Sent from my SGH-T959 using XDA App
Ditto, mine always finds a way to creep back up to higher brightness levels.
I think I'll just use auto from now on
Sent from my SGH-T959 using XDA App
I'm not real sure but the lowest manual level seems still too bright to me. I've seen lower with Auto on, but maybe its my eyes playing tricks again.
It is probably Power Savings in the Display settings that is STILL automatically dimming the display, so ot merely seems like auto brightness is brighter than manual max adjustment. Turning Power Savings off keeps the screen at 100% all the time --the browser and other apps will not dim the display anymore.
Sent from my GT-I9000M using XDA App
silverwolf0 said:
I'm not real sure but the lowest manual level seems still too bright to me. I've seen lower with Auto on, but maybe its my eyes playing tricks again.
Click to expand...
Click to collapse
This is one thing that drives me nuts with this phone. I use the "dimmer" widget to drop the thing down to 10 brightness, but even that's way too bright and I haven't yet found an app that makes the display dimmer than 10 (I know that requires root, but none of the ones in the market seem to work with the Vibrant).
applebook said:
It is probably Power Savings in the Display settings that is STILL automatically dimming the display, so ot merely seems like auto brightness is brighter than manual max adjustment. Turning Power Savings off keeps the screen at 100% all the time --the browser and other apps will not dim the display anymore.
Sent from my GT-I9000M using XDA App
Click to expand...
Click to collapse
Maybe I'm missing something here, but I have power savings off and auto brightness off, and the screen still dims when I go into the browser.
I got my GT 10.1 this past Monday and I have noticed auto brightness changes quite frequently. I can't figure out why. I don't think I am blocking the sensor but I don't know where it is...
Has anyone else had this issue? It's making me dizzy so I just turned off the auto setting but it seems like it should work.
Yes, mine does the same. I assume the sensor is next to the front camera, which I'm not obstructing. But the brightness level will change rapidly. I had to disable the feature. Found it default to a level too dark most of the time anyway.
I agree with it being too dark. At least I know I'm not the only one with the issue.
Same issue with me. Turned it off. I read that auto brightness burns more battery than full brightness cause it's constantly asking the CPU to make a decision regarding brightness.
Sent from my Galaxy Tab 10.1 using Tapatalk.
Interesting. I always thought that one if the purposes of auto brightness was to conserve the battery.
Sent from my DROIDX using XDA App
I had this problem too. It would constantly change so i had to disable it.
Maybe samsung can put a fix out for it.
I imagine the algorithm included is very simple and uses very few cpu cycles, so I doubt it has an impact on battery life. Especially since it probably doesn't (shouldn't) run when the screen is off, so it shouldn't prevent the device from sleeping.
I agree the levels they have set are much too dim and make auto-brightness just about useless. I had the opposite problem with my Captivate, where the auto-brightness as too bright. Fortunately CM7 allows you to adjust the levels for auto-brightness. I hope we see something similar show up in a custom rom for the Galaxy Tab 10.1
Anyway, I keep mine set at 20% and that seems to work pretty well for me.
Where do you see the brightness percentage? I have a slider but don't see a percentage anywhere.
It's an approximation on my behalf.
I notice the same problem especially when holding the device vertically with my right hand on the front facing camera. I guess the ambient sensor is located somewhere where my hand is and thinks that I'm in dark room and automatically lowers the brightness. I also noticed that the brigthness change whenever I touch the screen so i guess its listening every time you touch the screen unlike the ipad where it refreshes evertytime it wakes up.
Sent from my GT-P7510 using XDA Premium App
mesasone said:
It's an approximation on my behalf.
Click to expand...
Click to collapse
Ok. I thought I was missing something somewhere...
Sent from my DROIDX using XDA App
Is very anoying, i was moving my head while the screen increase the brightness and move my head and decrease... over and over. So i switch to a custom brightness.
What's best for battery life, automatic brightness on ? Or set to a certain % ? Like at home if at 40%-50% that's good enough, but outside, or in bright area, hard to tell, much higher, or even auto.
Some phones do better or worse on auto brightness. Some phones can adjust quickly and actually do auto brightness very good, other phones I've had suck at adjusting the light level on auto.
What do you recommend ? And which is easier on battery life ?
Sent from my Nexus 4 using xda premium
Try lux. It can give you the best of both.
Zorachus said:
What's best for battery life, automatic brightness on ? Or set to a certain % ? Like at home if at 40%-50% that's good enough, but outside, or in bright area, hard to tell, much higher, or even auto.
Some phones do better or worse on auto brightness. Some phones can adjust quickly and actually do auto brightness very good, other phones I've had suck at adjusting the light level on auto.
What do you recommend ? And which is easier on battery life ?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Personally, I never put my brightness on auto. I always put it at a certain percentage up to the point where I can see the icons on my phone and such. Putting it on auto will make the phone fluctuate between low and high brightness setting according to the lighting of the environment. When I'm home, I always set my brightness level at the very lowest. Also another thing I notice is that when I'm outside I need to turn up the lighting to about 10-20 percent and I good to go. When I'm indoors, the screen is quite bright and so I just turn it back down. (You get the point.)
I don't think there are phones that perform better or worse on auto-brightness. I don't even think it has any effect on performance. Anyways, to answer your question about battery life. If you can't see the phone while you're outdoors then you need to turn it up and thus it will use more power. Personally, I suggest that you set it at a fixed percentage rather than auto.
Was looking into this question myself. What I was able to turn up amounts to the following.
Setting the brightness manually or through the use of the auto brightness makes no difference if its the same percentage/ brightness setting.
The difference comes down to using auto brightness will cause the cpu execute to make the setting changed according to the polled data from the light sensor. The will cause minimal additional battery drain I suspect, but the exact number I haven't been able to identify. So this is the downside. The upside is that if the brightness settings are compatible for you, its very convenient.
As for the manual, you may gain a little due to the lower cpu use. More importantly, you can tune the brightness to what you want. If the auto setting for a certain outdoor environment is too high, if the manual setting is lower that the user prefers this could also save battery. Of course the opposite is also true. Same for indoors, etc... Being manual it requires you to change it, but using certain ROMs, quick setting tile or apps make this a lot quicker.
I'm personally running Xylon + Nova Prime + Brightness widget
Set the gesture swipe up, to execute the widget
Set 0,20,45,80,auto percent brightness in the widget
Swipe up to cycle through when indoor or out, home...
Zorachus said:
What's best for battery life, automatic brightness on ? Or set to a certain % ? Like at home if at 40%-50% that's good enough, but outside, or in bright area, hard to tell, much higher, or even auto.
Some phones do better or worse on auto brightness. Some phones can adjust quickly and actually do auto brightness very good, other phones I've had suck at adjusting the light level on auto.
What do you recommend ? And which is easier on battery life ?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I too am running Xylon + Nova. Where do I get this brightness app ? I'll look on Play.
Sent from my Nexus 4 using xda premium
Free in the play store
Zorachus said:
I too am running Xylon + Nova. Where do I get this brightness app ? I'll look on Play.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
If you really need to conserve the battery I don't recommend having your screen brightness
at more than than 10%, most of the time I run at around 5%.
Asking others about their Auto Brightness experience is not very useful because a user
in Brazil will have a different result than a user in Norway.
If you charge your phone often and can read the screen at auto brightness just run it at that.
Otherwise you should always manually adjust your brightness for your own threshold of
readability.
A curious thing about LCD screens is that blacks and whites draw similar amount of power.
(As opposed to other technologies such as OLED). So ROMs with high contrast text that are
easier to read can actually help you save battery if you manually adjust brightness for readability.
I agree with using Lux, once setup and you have linked several light readings to screen brightness settings and set to dynamically adjust its great. The paid version allows you to dim the screen alot more then you can do normally and makes reading in bed very easy on your eyes.
estallings15 said:
Try lux. It can give you the best of both.
Click to expand...
Click to collapse
if I put the manual slider on 100%, and then tick the "automatic brightness", it stays at 100%, even in a fully darkened room.
if I put the manual slider on 0%, and then tick the "automatic brightness", it stays at 0%, even under direct sunlight.
What gives ? LG forgot to program this feature ?
Noam23 said:
if I put the manual slider on 100%, and then tick the "automatic brightness", it stays at 100%, even in a fully darkened room.
if I put the manual slider on 0%, and then tick the "automatic brightness", it stays at 0%, even under direct sunlight.
What gives ? LG forgot to program this feature ?
Click to expand...
Click to collapse
I am not certain on this but my understanding of how the auto brightness works is that it adjusts within a certain % up or down of where you set the slider.
I am sure someone with a bit more knowledge will be along shortly to advise exactly how it works though
It appears to me that the 100% and 0% always do full on or full dimmed, whether you set auto brightness or not. Anywhere in between it does work with auto brightness, but the screen reacts quite slowly.
Auto brightness on this device is rubbish. Period. It doesn't work at all when you're set on 100 or 0 percent, and if you're in between, it works, but only buy using very slight changes to the manual setting that you chose. Why on earth did they base the auto brightness on the manual brightness???
Sent from my LG-D802 using XDA Premium 4 mobile app
auto brightness works quite well for me. I have it set as a 55% baseline and it always changes in more or less light. It takes a second but it will do it and works great. The slider does not show the change though.
Download Lux Auto Brightness.
bova80 said:
auto brightness works quite well for me. I have it set as a 55% baseline and it always changes in more or less light. It takes a second but it will do it and works great. The slider does not show the change though.
Click to expand...
Click to collapse
No, it doesn't work well for you at all. If you put it at 55%, and go to direct sunlight, it will never come close to 100% brightness (I would say only about 60-70%). Moreover, if you go to a pitch black room, you will not get 1-2% brightness, rather ~30-40%. I would say the automatic brightness control of the G2, can only play with ~10% above/below what you set your manual settings. Who does automatic brightness like this ? pathetic and useless.
sacredsoul said:
Download Lux Auto Brightness.
Click to expand...
Click to collapse
I also use a 3rd party program to control brightness. My phone would just randomly uncheck auto brightness on its own. Not sure why it sucks so bad on this phone. So, check out Velis Auto Brightness in the play store. It disables system management of brightness, takes over the job.
Sent from my VS980 4G using xda app-developers app
D-meist said:
I also use a 3rd party program to control brightness. My phone would just randomly uncheck auto brightness on its own. Not sure why it sucks so bad on this phone. So, check out Velis Auto Brightness in the play store. It disables system management of brightness, takes over the job.
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
I used to use Velis too but it was a bit too cluttered for me. Lux was a whole lot more userfriendly. Plus it can reduce brightness below minimum levels and has a built in night mode that activates automatically. Found it best for my use.
Noam23 said:
No, it doesn't work well for you at all. If you put it at 55%, and go to direct sunlight, it will never come close to 100% brightness (I would say only about 60-70%). Moreover, if you go to a pitch black room, you will not get 1-2% brightness, rather ~30-40%. I would say the automatic brightness control of the G2, can only play with ~10% above/below what you set your manual settings. Who does automatic brightness like this ? pathetic and useless.
Click to expand...
Click to collapse
whether it goes to 100% brightness or not it brightens up enough that I can see it clear as day. So why do I care if it doesn't get to 100%?
bova80 said:
auto brightness works quite well for me. I have it set as a 55% baseline and it always changes in more or less light. It takes a second but it will do it and works great. The slider does not show the change though.
Click to expand...
Click to collapse
You have no clue how are the brightness works.
Sent from my LG-D801 using xda app-developers app
shook187 said:
You have no clue how are the brightness works.
Sent from my LG-D801 using xda app-developers app
Click to expand...
Click to collapse
and like I said, why do I care if it is changing brightness to levels I can see for the given light I'm in what does it matter? Apparently it is doing something right.
Have seen a lot of varied answers on this topic but having owned an iPhone in the past LG has set up their brightness controls to work in much the same way. You basically have two independent controls that can be combined to work together.
For example, I have my brightness on 85% and Auto is checked to ON. This means brightness will adjust automatically but never exceed 85%. You are setting a ceiling and it will NEVER go to 100% bright if set this way. If I turn Auto OFF, its always 85% regardless of ambient light. Hope this helps some peeps understand this better. I actually prefer their implementation but it's familiar to me.
Sent from my VS980 4G using Tapatalk
nateinva said:
Have seen a lot of varied answers on this topic but having owned an iPhone in the past LG has set up their brightness controls to work in much the same way. You basically have two independent controls that can be combined to work together.
For example, I have my brightness on 85% and Auto is checked to ON. This means brightness will adjust automatically but never exceed 85%. You are setting a ceiling and it will NEVER go to 100% bright if set this way. If I turn Auto OFF, its always 85% regardless of ambient light. Hope this helps some peeps understand this better. I actually prefer their implementation but it's familiar to me.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
now this makes sense, if only someone explained it like that before, rather than saying you don't know what you are talking about.
nateinva said:
Have seen a lot of varied answers on this topic but having owned an iPhone in the past LG has set up their brightness controls to work in much the same way. You basically have two independent controls that can be combined to work together.
For example, I have my brightness on 85% and Auto is checked to ON. This means brightness will adjust automatically but never exceed 85%. You are setting a ceiling and it will NEVER go to 100% bright if set this way. If I turn Auto OFF, its always 85% regardless of ambient light. Hope this helps some peeps understand this better. I actually prefer their implementation but it's familiar to me.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
This explanation contains logic, while LG's automatic brightness control, contains none. If you set brightness at 85%, and turn automatic brightness ON, assuming 85% set the top ceiling, then going into a pitch black room will still allow the LG to turn brightness to something like 5%. In reality, it doesn't happen, even in pitch black rooms, the LG is still close to 85% (maybe 65%), which is totally blinding. If you want to see how a working automatic brightness control behave, install lux brightness control.
Noam23 said:
This explanation contains logic, while LG's automatic brightness control, contains none. If you set brightness at 85%, and turn automatic brightness ON, assuming 85% set the top ceiling, then going into a pitch black room will still allow the LG to turn brightness to something like 5%. In reality, it doesn't happen, even in pitch black rooms, the LG is still close to 85% (maybe 65%), which is totally blinding. If you want to see how a working automatic brightness control behave, install lux brightness control.
Click to expand...
Click to collapse
I don't disagree with this at all....I'm still observing some odd/unexpected behavior and you're right.....it doesn't seem like there is enough 'travel range' when using auto in very dark environments. 85% in regular/full light should scale down dramatically in a dark room...one would think?
I actually prefer my screen brighter though so this hasn't bothered me, but that is personal preference and definitely not one size fits all. I have used the built-in controls on CM based ROMs on a few of my other devices before the G2 and you get much more fine-grained control there. I will say though that as far as the stock brightness controls go, the G2 behaves identically to the 2 iPhones I've used. If anyone reading is interested and has a friend with an iPhone, hop into the settings and look at the brightness controls. I think you'll see where LG drew some inspiration.
Loving this phone overall....best I've owned so far! I purchased off contract and sold my Droid RAZR MAXX HD on Swappa....couldn't be happier.
Noam23 said:
This explanation contains logic, while LG's automatic brightness control, contains none. If you set brightness at 85%, and turn automatic brightness ON, assuming 85% set the top ceiling, then going into a pitch black room will still allow the LG to turn brightness to something like 5%. In reality, it doesn't happen, even in pitch black rooms, the LG is still close to 85% (maybe 65%), which is totally blinding. If you want to see how a working automatic brightness control behave, install lux brightness control.
Click to expand...
Click to collapse
Did you use any android phone before the G2?they all work the same way,sony Samsung,lg....
You are right that the auto brightness should go from zero to 100% depends on the available light but all the brands i used have the same auto brightness.
I think it's something related to android.
Sent from my LG-D802 using xda premium
Noam23 said:
No, it doesn't work well for you at all. If you put it at 55%, and go to direct sunlight, it will never come close to 100% brightness (I would say only about 60-70%). Moreover, if you go to a pitch black room, you will not get 1-2% brightness, rather ~30-40%. I would say the automatic brightness control of the G2, can only play with ~10% above/below what you set your manual settings. Who does automatic brightness like this ? pathetic and useless.
Click to expand...
Click to collapse
if you set it at 55% or any other, then that's your max even when you go into sunlight.
Sent from my LG-D800 using xda app-developers app
gm007 said:
Did you use any android phone before the G2?they all work the same way,sony Samsung,lg....
You are right that the auto brightness should go from zero to 100% depends on the available light but all the brands i used have the same auto brightness.
I think it's something related to android.
Sent from my LG-D802 using xda premium
Click to expand...
Click to collapse
It wasn't like this with my Galaxy s2.
Sent from my LG-D802 using XDA Premium 4 mobile app
Noam23 said:
It wasn't like this with my Galaxy s2.
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes because there was not any slider to tweak the auto brightness settings.
Sent from my LG-D802 using xda premium
Is everyone here satisfied with the screen brightness? It looks somewhat nice when the brightness is at 100% but then that drains the battery faster.
I have never used the 100% brightness - outside I'm not using the G Pad, inside I'm somewhere near 50-65% brightness, and for night reading 10-20% brightness. About battery draining, I haven't keeping an eye on it. When the battery goes near 30%, I automatically put in on the charger (I got one sexy thin 4m. USB cable here so I can keep using the tablet anywhere in my room)
Zarrick19 said:
I have never used the 100% brightness - outside I'm not using the G Pad, inside I'm somewhere near 50-65% brightness, and for night reading 10-20% brightness. About battery draining, I haven't keeping an eye on it. When the battery goes near 30%, I automatically put in on the charger (I got one sexy thin 4m. USB cable here so I can keep using the tablet anywhere in my room)
Click to expand...
Click to collapse
50-65% for me seems somewhat dim, almost too dim to enjoy the HD screen. Are there any additional settings other than the main brightness setting? I do not have auto brightness turned on at all
Indoors i hardly ever raise brightness over 40% i have no complaints. In fact 100% brightness is damn near blinding.
Faded_329 said:
Indoors i hardly ever raise brightness over 40% i have no complaints. In fact 100% brightness is damn near blinding.
Click to expand...
Click to collapse
Agreed. Brightness isn't an issue. The problem is that the gamma is too high resulting in darks being too dark.
Sent from my LG-V500 using Tapatalk 4
dalingrin said:
Agreed. Brightness isn't an issue. The problem is that the gamma is too high resulting in darks being too dark.
Click to expand...
Click to collapse
That's an interesting observation. I think there are apps to adjust the gamma. Does anybody have any tips on that?
dalingrin said:
Agreed. Brightness isn't an issue. The problem is that the gamma is too high resulting in darks being too dark.
Sent from my LG-V500 using Tapatalk 4
Click to expand...
Click to collapse
So can we change the gamma in the kernel ?
yes, I find the ugly screen (very dark) with the brightness below 60%.
by 100% against beautiful. But ouch battery !!
No, you can change the gamma (and saturation, and brightness and stuff) in an app, someone mentioned it here on xda, but I can't remember it's name. Take a look around
Zarrick19 said:
No, you can change the gamma (and saturation, and brightness and stuff) in an app, someone mentioned it here on xda, but I can't remember it's name. Take a look around
Click to expand...
Click to collapse
Screen adjuster
Faded_329 said:
Screen adjuster
Click to expand...
Click to collapse
I downloaded screen adjuster but it does not have any gamma or saturation settings. Only red, green, blue, brightness, and contrast. By the way, does anyone know how to take screenshots on this tablet?
hold Unlock + Volume down
I recommend using the app LUX. It does a terrific job of managing auto brightness. Way better than the built in logic. https://play.google.com/store/apps/details?id=com.vito.lux
Sent from my LG-V500 using Tapatalk 4
I'm slightly ahead with this advice because I haven't even looked into rooting yet. But I can tell you if Franco kernel comes out for this baby that's what you want. It fixed the gamma settings and the color settings on my Nexus 4 completely. Made it like a brand new device with beautiful accurate colors and amazing battery life to boot. I will be keeping my eyes out for Franco kernel.
Sent from my Nexus 7 using xda app-developers app