Related
This is what happens :
1. When I normally turn my N7 on , it goes throught the google logo and gets stuck on the ROM logo .
2. I can get into the bootloader when the USB is plugged off , but i cant get into recovery it just gets stuck on the google logo .
3.If I plug my USB in while in the bootloader the bootloader gets stucked and i cant move around in it or flash anything , but my PC recognize that an android device is connected . (if i get into the bootloader when the USB is allready connected it gets in the bootloader main screen but i cant move) .
So i cant flash , get into the rom or return to stock .
ANY IDEAS ?? please help me :crying::crying:
Bump
Definitely not bricked since of powers on. Fastboot flash the stock image and you should be good as new.
Sent from my Nexus 7 using Tapatalk 2
Strange, it shouldn't make a difference whether your USB is plugged or not when trying to get to the recovery.
If you get into the fast boot menu or "boot loader main screen" and you press the volume down button a few times you get no response? Sometimes it takes a few seconds for mine to switch to recovery,etc.
Also, what caused your tablet to get stuck in that state?
brGabriel said:
Strange, it shouldn't make a difference whether your USB is plugged or not when trying to get to the recovery.
If you get into the fast boot menu or "boot loader main screen" and you press the volume down button a few times you get no response? Sometimes it takes a few seconds for mine to switch to recovery,etc.
Also, what caused your tablet to get stuck in that state?
Click to expand...
Click to collapse
If I press the volum dowm bottom while on fast boot menu I can move around the menu if the usb is plugged off , but I can only shutdown or restart the fastboot since the start and recovery options just gets stuck on the google/rom logo if it is plugged in I just gets stuck in the menu and I cant even scroll . yea I waited about half an hour on the google logo trying to get to my recovery and nothing happened .
I JUST DONT KNOW WHAT I DID ! I really dont ! I am an experienced flahser and had been so for almost 2 years now ! I just left my N7 on the table and didnt touch it at all for a week and when I tried to turn it on after that I just got that prob . but I did nothing related to flashing or so - it just happened by staying at the table !
any help ?? PLEASE
I CANT RETURN TO STOCK , if i plugg in the usb fastboot gets stuck .
have you tried charging it on the wall charger to make sure the battery has got a full charge, don't know, just throwing out options
Hmmm, well at least you're able to boot the tablet and get to fastboot menu so its not a hard brick. Sounds like a corrupted partition of sorts if you can't get into ROM or recovery. Someone with more expertise might have a possible solution. I wouldn't lose hope yet.
yes , i did charged it to full batt .
i can get into fastboot but not rom or recovery and when i plugg in usb i have no fastboot , doesnt that mean i wont ever be able to flash ?
if i will make a vid of the prob it will help ?
Get to boot loader and do
fastboot flash recovery C:\File path to recovery on computer
Once you have a recovery installed you can push a ROM to your Nexus via adb.
Sent from my Nexus 7
Or you can always use wugfreshs toolkit and click flash back to stock option and check device won't boot, the same thing happened to me awhile ago and the bootloader problem is cause you have the old bootloader the knew 4.13 bootloader fixed that
Sent from my Nexus 7 using Tapatalk HD
i've had good luck with mskip's toolkit in a similar situation
veeman said:
Get to boot loader and do
fastboot flash recovery C:\File path to recovery on computer
Once you have a recovery installed you can push a ROM to your Nexus via adb.
Sent from my Nexus 7
Click to expand...
Click to collapse
xfrancis14 said:
Or you can always use wugfreshs toolkit and click flash back to stock option and check device won't boot, the same thing happened to me awhile ago and the bootloader problem is cause you have the old bootloader the knew 4.13 bootloader fixed that
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Guys , I told you that my bootloader gets stuck when I connect the usb - so how can I possibly flash anything ? please read the whole post
rkiller51 said:
Guys , I told you that my bootloader gets stuck when I connect the usb - so how can I possibly flash anything ? please read the whole post
Click to expand...
Click to collapse
It says you can get to the boot loader with the cable unplugged. So get to the boot loader and then plug in the USB.
Sent from my Nexus 7
Stop... MUFFIN TIME!!!
veeman said:
It says you can get to the boot loader with the cable unplugged. So get to the boot loader and then plug in the USB.
Sent from my Nexus 7
Stop... MUFFIN TIME!!!
Click to expand...
Click to collapse
Are you kidding ? "3.If I plug my USB in while in the bootloader the bootloader gets stucked and i cant move around in it or flash anything , but my PC recognize that an android device is connected ."
I really appreciate any kind of help, but why even write and answer when you didnt even fully read the question ?
rkiller51 said:
Are you kidding ? "3.If I plug my USB in while in the bootloader the bootloader gets stucked and i cant move around in it or flash anything , but my PC recognize that an android device is connected ."
I really appreciate any kind of help, but why even write and answer when you didnt even fully read the question ?
Click to expand...
Click to collapse
Lol just calm down man we're all just trying to help you!
Now, you need to get your N7 into the bootloader, it does not matter if you can't navigate the bootloader on your N7. Once in the bootloader, connect the N7 to your computer with the USB cable.
Once you're connected, make sure you've downloaded the Android SDK and open a command prompt. Navigate your command prompt (make sure you ran that command prompt as administrator) to the "platform-tools" directory.
Once in the platform-tools directory run the following command without quotes:
"fastboot devices"
It should return the serial number for your device, indicating that fastboot sees your N7 and can work with it.
After that type
"fastboot flash recovery *.img"
You'll need to head to clockworkmod.com to download the N7 recovery image. Place the downloaded image in the platform-tools directory and replace "*.img" with the filename of the recovery image you downloaded.
That's it! Unplug your N7 and go into recovery, and sideload whatever ROM you want!
Let us know how it goes!
PS: If fastboot devices shows nothing, we have a bigger problem...
TMan459 said:
Lol just calm down man we're all just trying to help you!
Now, you need to get your N7 into the bootloader, it does not matter if you can't navigate the bootloader on your N7. Once in the bootloader, connect the N7 to your computer with the USB cable.
Once you're connected, make sure you've downloaded the Android SDK and open a command prompt. Navigate your command prompt (make sure you ran that command prompt as administrator) to the "platform-tools" directory.
Once in the platform-tools directory run the following command without quotes:
"fastboot devices"
It should return the serial number for your device, indicating that fastboot sees your N7 and can work with it.
After that type
"fastboot flash recovery *.img"
You'll need to head to clockworkmod.com to download the N7 recovery image. Place the downloaded image in the platform-tools directory and replace "*.img" with the filename of the recovery image you downloaded.
That's it! Unplug your N7 and go into recovery, and sideload whatever ROM you want!
Let us know how it goes!
PS: If fastboot devices shows nothing, we have a bigger problem...
Click to expand...
Click to collapse
Its hard to be calm then you new N7 is dying :/
somthing like this ? (pic attached)
If i did everything like you said it means i do have the bigger prob help me!
OK. Next thing is to ensure your N7 is properly detected in Windows.
Just head to the device manager. You should see Original Android Interface or something along those lines.
Report back with a screenshot, those are very helpful!
TMan459 said:
OK. Next thing is to ensure your N7 is properly detected in Windows.
Just head to the device manager. You should see Original Android Interface or something along those lines.
Report back with a screenshot, those are very helpful!
Click to expand...
Click to collapse
Here you go (attached) ! you have everything you need mate ?
I really appreciate the help ! :good::good:
I had similar issues and was able to get back to stock using WugFresh's Nexus Root Toolkit. Highly recommended!
From the same command Window, in the same platform - tools directory, does adb devices show your device?
I'm not the lowest of the low, but I am the slowest of the slow.
Alrighty then. I have Zte Blade 3. Lovely phone. I rooted it and I really loved it. Everything worked perfectly. I even connected my phone to my ADSL 2+ modem. I loved it! And then and ugly motherfu***r like me had to do this. BRICK IT. I tried installing a new mod unsuccesfully. Installation process gave me error so I clicked reboot now in recovery mode.So it turned off. And then it showed me android logo as it always shows when its booting up. And I thought Imma give a rest to the mods I will enjoy my phone as it is. But the problem appeared. My phone DID NOT PASS the green android logo.Just sitting there.Can't enter recovery mode via key combination(never could I actually used RootBlade3 program to enter recovery mode). But now I cant boot,enter recovery mode or get recognized by my pc. Cuz the phone wont boot up. Before you asked I did update all my drivers. This phone cost me some good money and since Im 15 Im dead if I dont get this right. Imma make you a rich man If you fix it(lying cuz Im broke) Thanks in advance.:laugh:
I Love The Register Video said:
Alrighty then. I have Zte Blade 3. Lovely phone. I rooted it and I really loved it. Everything worked perfectly. I even connected my phone to my ADSL 2+ modem. I loved it! And then and ugly motherfu***r like me had to do this. BRICK IT. I tried installing a new mod unsuccesfully. Installation process gave me error so I clicked reboot now in recovery mode.So it turned off. And then it showed me android logo as it always shows when its booting up. And I thought Imma give a rest to the mods I will enjoy my phone as it is. But the problem appeared. My phone DID NOT PASS the green android logo.Just sitting there.Can't enter recovery mode via key combination(never could I actually used RootBlade3 program to enter recovery mode). But now I cant boot,enter recovery mode or get recognized by my pc. Cuz the phone wont boot up. Before you asked I did update all my drivers. This phone cost me some good money and since Im 15 Im dead if I dont get this right. Imma make you a rich man If you fix it(lying cuz Im broke) Thanks in advance.:laugh:
Click to expand...
Click to collapse
Download the official update.zip from official ZTE website for your phone!
It contains a recovery.img .
First copy the whole update.zip to your sdcard.
Then fastboot the stock recovery.img ..
Now it wont boot full , you are only able to get in recovery.
So go in recovery , apply update ; choose the update.zip and let the update.zip install.
Your phone should work fully normally now.
Thanks need more help
kevinrus123 said:
Download the official update.zip from official ZTE website for your phone!
It contains a recovery.img .
First copy the whole update.zip to your sdcard.
Then fastboot the stock recovery.img ..
Now it wont boot full , you are only able to get in recovery.
So go in recovery , apply update ; choose the update.zip and let the update.zip install.
Your phone should work fully normally now.
Click to expand...
Click to collapse
Im so happy you replied. Now here comes the deal-all the flashing and struff not good at it. If you could explain step by step I would be grateful. Slap a link of drivers and I thought you cant flash when your phone cant be recognized. Cuz when I enter fastboot it says waiting for device and then it says device not found. I tried almost every solution via modaco-tpt and many others...please help me bro
I Love The Register Video said:
Im so happy you replied. Now here comes the deal-all the flashing and struff not good at it. If you could explain step by step I would be grateful. Slap a link of drivers and I thought you cant flash when your phone cant be recognized. Cuz when I enter fastboot it says waiting for device and then it says device not found. I tried almost every solution via modaco-tpt and many others...please help me bro
Click to expand...
Click to collapse
You said you tried the recovery.img to fastboot , so : do you got the fastboot drivers for Blade III installed?
When you ain't installed them , it is normal that devices won't be found.
Click here to get to drivers
Hi there, can somebody GUIDE How to unbrick ONEPLUS 5?
My OP5 is dead, black screen, just can be recognized to PC via qualcomm drivers, but i have searching some guide to do this, no found.
I think could be some easy do this, because there is a way for OP3T, via msm tool.
Thank you abot the support.
you have fast boot access and are you able to get into bootloader
#3
dalepothen said:
you have fast boot access and are you able to get into bootloader
Click to expand...
Click to collapse
hI there,
No, i cant full black screen!!!
i dont know if there is a way to have fasboot acces , full black screen,
let me tell you, when i conected the phone to pc, was recognized via qualcoom drivers
Thank you
How did you end up bricking it?
dalepothen said:
you have fast boot access and are you able to get into bootloader
Click to expand...
Click to collapse
mahoro.san said:
how did you end up bricking it?
Click to expand...
Click to collapse
hi, i did it trying to change a rom via twrp, when finished flashing gone black screen!!
Connect phone to computer
Type
adb devices
See anything?
If not try fastboot devices
If you see anything, try typing
adb reboot recovery
If you can get here, you can try flashing the stock room over your current ROM. Make sure to wipe cache
Binary Assault said:
Connect phone to computer
Type
adb devices
See anything?
If not try fastboot devices
If you see anything, try typing
adb reboot recovery
If you can get here, you can try flashing the stock room over your current ROM. Make sure to wipe cache
Click to expand...
Click to collapse
Hi !!! i did it!!! but .... bad news , nothing good!!!
...fastboot devices .... still dead
........adb devices .... still dead!!!!
black screen!!!
Hello guys, how are you today ?
I will do my best to write properly (french, sad)
So, i unlocked my phone with no problem. I tried to install a working TWRP. The ADB command to install was easy, but impossible to boot in twrp with the boot command on ADB.
I understood that i just needed to press up and power to open TWRP.
I putted on my OTG USB KEY the xiaomi.eu weekly ROM for my phone.
I formated only DATA, and i began the installation.
I had an error, and after my OTG was not recognize.
I just putted up and power to reboot the phone and try again.
But i dont know what happened, black screen, impossible to boot on something, i tryed to hold power 15 sec and nothing work, impossible to go to fastboot mode.
The phone is recognized on windows but nothing more.
I searched on the net and my phone is bricked. I need to open it to press ELD.
I found someone who has ELD permission for 12$.
Now i just want to know if someone can explain me how to open without damage the phone and how to be in ELD mode.
Thanks you and have a nice day.
I guess you could try to buy an EDL cable instead.
How you see phone in device manager?
newhope81 said:
Hello guys, how are you today ?
I will do my best to write properly (french, sad)
So, i unlocked my phone with no problem. I tried to install a working TWRP. The ADB command to install was easy, but impossible to boot in twrp with the boot command on ADB.
I understood that i just needed to press up and power to open TWRP.
I putted on my OTG USB KEY the xiaomi.eu weekly ROM for my phone.
I formated only DATA, and i began the installation.
I had an error, and after my OTG was not recognize.
I just putted up and power to reboot the phone and try again.
But i dont know what happened, black screen, impossible to boot on something, i tryed to hold power 15 sec and nothing work, impossible to go to fastboot mode.
The phone is recognized on windows but nothing more.
I searched on the net and my phone is bricked. I need to open it to press ELD.
I found someone who has ELD permission for 12$.
Now i just want to know if someone can explain me how to open without damage the phone and how to be in ELD mode.
Thanks you and have a nice day.
Click to expand...
Click to collapse
Can you get into fastboot
My phone was completely stuck in black screen impossible to go on fastboot mode.
Luckely, i dont know how but my phone was recognized like if i was in EDL mode.
I contacted an asian man on WhatsApp, he putted his logs on miflash to allowed EDL flash.
My phone is Alive now!
Where Can i buy an EDL cable if i need it ? It replace the open of the phone?
Hi
My phone stopped working a couple of days ago, I had been running a custom rom for 2 mths. I tried to restart and boot to recovery TWRP as I was going to reflash the rom. It charegs with no lights, for a day I couldnt boot to TWRP if it did it stayed on the start screen with no options. Today I can get options in TWRP so I tried to start fresh install but intstallation stops at step 1 ?
I have no idea what happened to the phone or why it just died, but dont understand why I can get into TWRP but cant flash rom etc. Also sometimes it say system destroyed message? but still can get into TWRP ?
Any ideas or help will much appreciated really would like to fix this rather than write the phone off.
Thanks
i think flashing firmware is the only option
ranjodhricky said:
i think flashing firmware is the only option
Click to expand...
Click to collapse
Hi, yeah I think thats what I try, is this flashing stock rom via MI flash or a different process?
try miflash if doesn't work try QFil
update
ranjodhricky said:
try miflash if doesn't work try QFil
Click to expand...
Click to collapse
Hi, been playing with this when i have time over the last few weeks.
I have been trying to flash firmware, I dont seem to be able to get QFIL to work for me, it wont reconsise the port. However MIFlash does but I get errors, sometimes it flashes but doesnt end? other times i have had error flashing modem_a or error flashing modem_b (maybe device is locked).
In ADB it says already unlocked. Also I can only boot into fastboot, not recovery so i cant intall anything from adb sideload, it wont boot into bootloader just powers off if i try this. I guess theres no recovery on it now as I cannot boot into it.
Any ideas on where to go from here , EDL? I really didnt want to attempt to open the phone.
Thanks
Try miflash 2019 with stock rom pie latest with edl mode
if bootloader unlocked You can enter edl mode via fastboot with the command 'fastboot oem edl'
Yincen said:
Try miflash 2019 with stock rom pie latest with edl mode
if bootloader unlocked You can enter edl mode via fastboot with the command 'fastboot oem edl'
Click to expand...
Click to collapse
Thanks, tried this, says success then just carries on , so i have to disconnect. However when then trying to boot the device it shows Android one logo and if im lucky after a few attempts it goes to the screeen saying Hi There, where you choose your language to set up the phone. However it nows seem to be unresponsve and frozen on that screen.
Im beginning to think its could be hardware issue and phone is just faulty, i really dont want to bin it as its imacculate condition seems a real shame, but it is 3 years old i guess.
Any further help or ideas much appreciated.
healy2k said:
Thanks, tried this, says success then just carries on , so i have to disconnect. However when then trying to boot the device it shows Android one logo and if im lucky after a few attempts it goes to the screeen saying Hi There, where you choose your language to set up the phone. However it nows seem to be unresponsve and frozen on that screen.
Im beginning to think its could be hardware issue and phone is just faulty, i really dont want to bin it as its imacculate condition seems a real shame, but it is 3 years old i guess.
Any further help or ideas much appreciated.
Click to expand...
Click to collapse
try doing a factory reset from Recovery , good luck