Hi friends, as i see people complaining about temperature but they dont know the actual cpu temperature (and the people like me who wants to do extensive monitoring on top of all apps) , i decided to write an easy to follow guide on how to monitor these temperatures in statusbar.
You need cooltool from playstore installed, no root or xposed is needed for this operation.
i configured my statusbar to show as less as possible in cooltool, so only CPU usage, CPU0, CPU1 and GPU temperatures will be displayed after following these steps.
These steps may apply for other devices too, but please note that the sysfs paths may differ from device to device and even from android version to another.
1. Open up cooltool and swipe to the second tab ''labels''.
2. Make sure CPU usage, Custom Label 1, Custom Label 2, and Custom Label 3 are ticked and the rest is unticked.
3. Hit ''Fine Tuning'' below
4. Hit ''Custom Label 1'' and configure like this:
Code:
Prefix: G1:
Postfix:
Path: /sys/devices/virtual/thermal/thermal_zone12/temp
Regex: (\d+)
Replacement Pattern: $1
5. Hit ''Custom Label 2'' and configure like this:
Code:
Prefix: C1
Postfix:
Path: /sys/devices/virtual/thermal/thermal_zone7/temp
Regex: (\d+)
Replacement Pattern: $1
6. Hit ''Custom Label 3'' and configure like this:
Code:
Prefix: C2
Postfix:
Path: /sys/devices/virtual/thermal/thermal_zone13/temp
Regex: (\d+)
Replacement Pattern: $1
7. Hit ''OK''
Now it should show in statusbar, if not, hit ''Show Panel''.
You can theme it to your likings and align it in the spot that suits u best via the various sliders and settings, just play with it.
Additionally, u can disable notification via settings>apps>cooltool>notifications
If all done, things should look like attached screenshots.
G1 = GPU temperature
C1 = CPU0 temperature
C2 = CPU1 temperature
Thank you!
Xperia Z5 E6653 w/ Tapatalk
how about cpu freq avg ?
Thermal engine table detail
RyTekk said:
Thermal engine table detail
Click to expand...
Click to collapse
I found something online for our 810 dragon sensor mapping. I think OP's mapping is correct here.
See the link below, there is a link to our 810 mapping.
https://developer.qualcomm.com/forum/qdn-forums/software/snapdragon-profiler/29435
viperc said:
I found something online for our 810 dragon sensor mapping. I think OP's mapping is correct here.
See the link below, there is a link to our 810 mapping.
https://developer.qualcomm.com/forum/qdn-forums/software/snapdragon-profiler/29435
Click to expand...
Click to collapse
Yah, I didn't tell OP was wrong, I just post the detail for who are interested in it
RyTekk said:
Yah, I didn't tell OP was wrong, I just post the detail for who are interested in it
Click to expand...
Click to collapse
:good: there's a lot of sensor information in that link also. Sharing it so maybe someone will find them useful
RyTekk said:
Thermal engine table detail
Click to expand...
Click to collapse
Yeah there's some information in /sys/module/msm_thermal/sensor_info too but I asked @Tommy-Geenexus for confirmation and I trust him.
Sent from my E6653 using XDA-Developers mobile app
langeveld024 said:
Yeah there's some information in /sys/module/msm_thermal/sensor_info too but I asked @Tommy-Geenexus for confirmation and I trust him.
Sent from my E6653 using XDA-Developers mobile app
Click to expand...
Click to collapse
I took from sonydevxperia's github so it should be right, and the link to CAF above also point out exactly as mine.
RyTekk said:
I took from sonydevxperia's github so it should be right, and the link to CAF above also point out exactly as mine.
Click to expand...
Click to collapse
You should not trust the Open-Source Sony AOSP more than Qualcomm Engineers (in general you should not trust anyone involved in the Sony AOSP project too much )
Tommy-Geenexus said:
You should not trust the Open-Source Sony AOSP more than Qualcomm Engineers (in general you should not trust anyone involved in the Sony AOSP project too much )
Click to expand...
Click to collapse
LOL thanks for your words :laugh:. Btw, do you know how to fix "make [1] nothing to be done for "dtbs""? Maybe we'll talking via PM or something that I can contact with you for not to off-topic
RyTekk said:
LOL thanks for your words :laugh:. Btw, do you know how to fix "make [1] nothing to be done for "dtbs""? Maybe we'll talking via PM or something that I can contact with you for not to off-topic
Click to expand...
Click to collapse
Nothing to be fixed there, it works properly. No changes to dtb's, no recompilation needed.
You try to getting into Kernel hacking?
If you need assistance, mail me or drop me a pm.
RyTekk said:
for not to off-topic
Click to expand...
Click to collapse
I don't mind a bit off-topic in my threads
Sent from my E6653 using XDA-Developers mobile app
langeveld024 said:
I don't mind a bit off-topic in my threads
Sent from my E6653 using XDA-Developers mobile app
Click to expand...
Click to collapse
Bro, help me, one of them didnt work. I tried to used your guide on my z5 premium.
Oohhlala said:
Bro, help me, one of them didnt work. I tried to used your guide on my z5 premium.
Click to expand...
Click to collapse
Which one doesn't work?
Sent from my E6653 using XDA-Developers mobile app
langeveld024 said:
Which one doesn't work?
Sent from my E6653 using XDA-Developers mobile app
Click to expand...
Click to collapse
C1 didnt show the temp
Oohhlala said:
C1 didnt show the temp
Click to expand...
Click to collapse
Can u be a bit more specific? What did it show then?
Sent from my E6653 using XDA-Developers mobile app
langeveld024 said:
I don't mind a bit off-topic in my threads
Sent from my E6653 using XDA-Developers mobile app
Click to expand...
Click to collapse
langeveld024 said:
Can u be a bit more specific? What did it show then?
Sent from my E6653 using XDA-Developers mobile app
Click to expand...
Click to collapse
C1 show !IO. Z5 and z5 premium have 4 cores cpu. How to show temp of all. Thanks
Oohhlala said:
C1 show !IO. Z5 and z5 premium have 4 cores cpu. How to show temp of all. Thanks
Click to expand...
Click to collapse
Then u didn't fill in the regex field. (\d+)
U have to fill in exactly as mentioned in OP.
Also, since COOLTOOL only allows for setting 3 custom labels, we can't set up temperature per core. But does it matter? No. Important thing is to check cpu0 and cpu0 and GPU.
Sent from my E6653 using XDA-Developers mobile app
Perfect! Thank you
Related
Hi everyone,
Im here to share my stweaks settings with perseus kernel and get some opinions.
Objectives:
- Get full performance when i need (with 1600mHz and gpu at 733mHz)
- Average battery duration (more than 1 day with regular use, like games, xmbc, web surfing, listen music and do some calls)
- Fluid usage
To make that profile i have used this guide to understand better the configuration @ link
BE CAREFULL WITH UV
internal_iosched=row
sd_iosched=row
internal_read_ahead_kb=2048
sd_read_ahead_kb=2048
CONFIG_BOOTED=true
CONTROLSWITCH_CPU=off
scaling_max_freq=1600000
scaling_min_freq=200000
CPU_VOLT_1800=1400000
CPU_VOLT_1704=1400000
CPU_VOLT_1600=1262500
CPU_VOLT_1500=1200000
CPU_VOLT_1400=1162500
CPU_VOLT_1300=1125000
CPU_VOLT_1200=1062500
CPU_VOLT_1100=1012500
CPU_VOLT_1000=962500
CPU_VOLT_900=912500
CPU_VOLT_800=862500
CPU_VOLT_700=850000
CPU_VOLT_600=837500
CPU_VOLT_500=812500
CPU_VOLT_400=800000
CPU_VOLT_300=787500
CPU_VOLT_200=787500
scaling_governor=pegasusq
sampling_rate=15000
sampling_down_factor=1
up_threshold=80
down_differential=15
freq_for_responsiveness=1000000
up_threshold_at_min_freq=60
freq_for_fast_down=1400000
up_threshold_at_fast_down=80
freq_step=50
up_threshold_diff=5
freq_step_dec=10
flexrate_enable=on
flexrate_max_freq=800000
flexrate_forcerate=0
cpu_up_rate=8
cpu_down_rate=15
up_nr_cpus=1
hotplug_lock=0
max_cpu_lock=0
min_cpu_lock=0
hotplug_freq_1_1=400000
hotplug_freq_2_0=200000
hotplug_freq_2_1=500000
hotplug_freq_3_0=300000
hotplug_freq_3_1=600000
hotplug_freq_4_0=400000
hotplug_rq_1_1=150
hotplug_rq_2_0=150
hotplug_rq_2_1=250
hotplug_rq_3_0=250
hotplug_rq_3_1=340
hotplug_rq_4_0=340
cpu_online_bias_count=2
cpu_online_bias_up_threshold=50
cpu_online_bias_down_threshold=30
CONTROLSWITCH_BUS=off
BUS_sampling_rate=70000
BUS_load_history_size=5
BUS_dmc_max_threshold=25
BUS_idle_threshold=4
BUS_max_cpu_threshold=15
BUS_up_cpu_threshold=10
BUS_cpu_slope_size=5
BUS_INT_VOLT_100=850000
BUS_INT_VOLT_133=887500
BUS_INT_VOLT_160=925000
BUS_INT_VOLT_200=1000000
BUS_MIF_VOLT_100=900000
BUS_MIF_VOLT_133=900000
BUS_MIF_VOLT_160=900000
BUS_MIF_VOLT_267=950000
BUS_MIF_VOLT_400=1000000
CONTROLSWITCH_GPU=off
max_freq=733
min_freq=160
GPU_UP=70
GPU_DIFF=5
utilization_timeout=25
GPU_VOLT_54=825
GPU_VOLT_108=850
GPU_VOLT_160=825
GPU_VOLT_266=850
GPU_VOLT_350=900
GPU_VOLT_440=950
GPU_VOLT_533=1000
GPU_VOLT_640=1050
GPU_VOLT_733=1125
GPU_VOLT_800=1200
Dyn_fsync_active=on
speaker_tuning=on
speaker_offset=2
headphone_amplifier_level=50
stereo_expansion=off
stereo_expansion_gain=16
eq_presets=shenanigans
eq_selection=1
eq_preset=5
digital_gain=0
eq_band1=4
eq_band2=3
eq_band3=2
eq_band4=2
eq_band5=3
fll_tuning=on
dac_osr128=on
dac_direct=on
mono_downmix=off
dcp_ac_input_curr=1200
dcp_ac_chrg_curr=1200
sdp_input_curr=475
sdp_chrg_curr=475
cdp_input_curr=1000
cdp_chrg_curr=1000
ignore_stable_margin=off
ignore_unstable_power=off
batt_chrg_hard_volt=2
batt_chrg_soft_volt=4300000
fb_delay=0
hook_intercept=off
sequence_intercept=on
s_digital_noise_reduction_mask_14=on
s_digital_noise_reduction_mask_16=on
s_factory_digital_noise_reduction=off
s_high_dynamic_range_mask_14=on
s_high_dynamic_range_mask_16=on
s_factory_high_dynamic_range=off
s_edge_enhancement_mask_1=on
s_edge_enhancement_mask_14=on
s_edge_enhancement_mask_16=on
s_edge_enhancement_mask_64=on
s_factory_edge_enhancement=off
de_positive_e=0
de_positive_f=0
de_min_ratio=0
de_max_ratio=0
s_chroma_saturation=on
s_factory_chroma_saturation=off
cs_weight=0
cs_red=0
cs_green=0
cs_blue=0
cs_yellow=0
cs_cyan=0
cs_magenta=0
s_MCM=on
mcm_temperature=0
s_channel_filters=on
scr_white_red=0
scr_white_green=0
scr_white_blue=0
scr_red_red=0
scr_red_green=0
scr_red_blue=0
scr_green_red=0
scr_green_green=0
scr_green_blue=0
scr_blue_red=0
scr_blue_blue=0
scr_blue_green=0
scr_yellow_red=0
scr_yellow_green=0
scr_yellow_blue=0
scr_cyan_red=0
scr_cyan_green=0
scr_cyan_blue=0
scr_magenta_red=0
scr_magenta_green=0
scr_magenta_blue=0
Click to expand...
Click to collapse
DOWNLOAD
Put file on "data/.perseus" and load with StweaksProfiles.
Thanks, I've been testing this for a while and getting great results. How can I make the colours slightly richer/more saturated? Just slightly...
untick master sequence on screen tab in stweaks
Sent from my GT-I9300 using xda premium
brenogbi said:
untick master sequence on screen tab in stweaks
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks I know about that.. I'm kinda looking for something between stock and Perseus default master sequence.. can't figure what to tweak for saturation though..
nice setup
Sent from my GT-I9300 using Tapatalk 2
quantumtraveler said:
Thanks I know about that.. I'm kinda looking for something between stock and Perseus default master sequence.. can't figure what to tweak for saturation though..
Click to expand...
Click to collapse
I think this is what you're looking for. I found a nice balance by setting all the color gains to a number higher than zero; all gains are the same number so an individual color isn't over or under saturated compared to the others. You can experiment with what you like. Personally, I've got all my gains set to 10.
RED GAIN=10
GREEN GAIN=10
BLUE GAIN=10
YELLOW GAIN=10
CYAN GAIN=10
MAGENTA GAIN=10
To my eyes, these numbers give a nice balance between Perseus "default" and the Samsung stock oversaturation, plus the annoying stock blue tint in whites is still gone. "Enable register hook" and "Enable master sequence" are both checked of course.
Dead link? Please reupload
Sent from my GT-I9500 using xda app-developers app
shahransani said:
Dead link? Please reupload
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
As far as i know Perseus kernel is no longer in development so I suggest that you move on to another kernel to get better support.
Also you're using an S4? So i think you posted on a wrong forum too.
And the OP here hasn't updated his thread since March so I deem that he is no longer active.
SignetSphere said:
As far as i know Perseus kernel is no longer in development so I suggest that you move on to another kernel to get better support.
Also you're using an S4? So i think you posted on a wrong forum too.
And the OP here hasn't updated his thread since March so I deem that he is no longer active.
Click to expand...
Click to collapse
Can you provide the correct forum for me. I'm newbies . Regards
Sent from my GT-I9500 using Tapatalk 2
shahransani said:
Can you provide the correct forum for me. I'm newbies . Regards
Sent from my GT-I9500 using Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=2162
Hi Guys..
My name is Geekynoob or Ankit.
I have been a big fan of Perseus Kernel like many and tonnes of others..!
I have been Messing around with s tweaks and loads of settings offlate and finally i have managed to reach a Certain level where my phone is perfectly stable.
Stable as in Voltage Wise
Stable as in Color Callibration.
Stable as in ROCKING PERSEUS STYLE.
Ofcourse you can try these settings with Devil kernel as well but ...
I AM NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR KIDNEY, LEVER, LUNGS, MANHOOD or YOUR PHONE..!
I Will now share my settings with you..!
All of You can share your settings as well..
The settings are very well tested by me on MY PHONE..!
Remember all the phone are NOT SAME..!
What applies for me.. MAY NOT work for YOU..!
Cheers Guys..
Suggestions and Changes.. MOST WELCOME..!
PS- Stweaks is what i use..! Devil Users should use tricksters mod i guess..!
Credits-
The kernel dev AndreiLux
My Facebook Frnd El Lee.. his profile was the one from where i begin this messing up journey lol..!
CPU Frequency And Settings..!
CPU_VOLT_1600=1125000
CPU_VOLT_1500=1100000
CPU_VOLT_1400=1062500
CPU_VOLT_1300=1025000
CPU_VOLT_1200=1000000
CPU_VOLT_1100=975000
CPU_VOLT_1000=962500
CPU_VOLT_900=937500
CPU_VOLT_800=912500
CPU_VOLT_700=887500
CPU_VOLT_600=862500
CPU_VOLT_500=837500
CPU_VOLT_400=812500
CPU_VOLT_300=787500
CPU_VOLT_200=775000
These settings..! Along with Thunderlite/Swift/Assassins rom and Now Pacific Rom have given me More thn 7hrs screen on with 2hrs+Calling..
wifi on ALL the time..
Music on my bluetooth headset..
Whatsapp
Emails etc on Sync..
gaming and more..!
occasional sync..
PS- I have the values applied at boot..
As they work fine for me..
You should not apply set on boot unless you are sure the values stick for you..
Try them. Out for a day.. And find it out..
GPU Voltages and Settings..!
max_freq=640
min_freq=160
GPU_UP=92
GPU_DIFF=4
utilization_timeout=75
GPU_VOLT_54=825
GPU_VOLT_108=850
GPU_VOLT_160=875
GPU_VOLT_266=925
GPU_VOLT_350=975
GPU_VOLT_440=1025
GPU_VOLT_533=1050
GPU_VOLT_640=1075
SCREEN Callibration SETTINGS..!
Register Hook- Enable
Master Seq- Enable
Brightness reduction-75
takeover point- 30
auto delta-20
Digital Noise Reduction,HDR,Edge,Edge - All Switched on..
Chroma saturation
5
8
17
8
3
-5
-1
white color temp
Tick On
400K
White color balance
-4
-4
-4
Primary
16
16
4
13
-40
-4
10
-26
-5
Secondary YCM
-10
16
-16
-8
-5
-3
-14
9
-10
Thats IT..!!
Try if u like it Just let me Know
No feedback.. no replies... Forever Alone lol..
geekynoob said:
No feedback.. no replies... Forever Alone lol..
Click to expand...
Click to collapse
:good: good job
Well, there's not much of text, you could put it in one post, but it's oke
Well nice but I find perseus kernel to be laggy. And my friend told me he read somewhere that undervolting can effect hardware in long run
Sent from my GT-N7100 using XDA Premium 4 mobile app
qube310 said:
Well, there's not much of text, you could put it in one post, but it's oke
Click to expand...
Click to collapse
i will do the needful.. I did this just to keep different posts.. so that i can write or change them later when i feel like..!
Mukhi11 said:
Well nice but I find perseus kernel to be laggy. And my friend told me he read somewhere that undervolting can effect hardware in long run
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I dont feel smallest of lag mate.. But then of course every note 2 is different..
Nobody uses the phone for more then a year or so.. I guess undervolting wont b an issue.. I
i have done loads of google too about it
This is the kind of thread I've been waiting for. All kernel tweaks at one place. Thanks 'bhai'.
thanks Ankit bro for sharing your setup. I have installed the thunder lite and perseus after trying PAC rom for some hours. gona try this..
ps missing pac too much, love its speed. wish perseus work on pac too
nukeman239 said:
This is the kind of thread I've been waiting for. All kernel tweaks at one place. Thanks 'bhai'.
Click to expand...
Click to collapse
Your welcome bhai..
I always try and help..
And I enjoy being here on xda..
Ps- Indian??
Sent from right here.. Using my Beast Note 2...!!
mani16985 said:
thanks Ankit bro for sharing your setup. I have installed the thunder lite and perseus after trying PAC rom for some hours. gona try this..
ps missing pac too much, love its speed. wish perseus work on pac too
Click to expand...
Click to collapse
Sure try it mani...
Thunderlite is also very smooth..
Well devil works on pac..
You can try these values on devil kernel as well..
Sent from right here.. Using my Beast Note 2...!!
i am on asv0
so i used 1175mv with 1600mhz
-25mv with -100mhz
Sent from my GT-N7100 using xda premium
geekynoob said:
Your welcome bhai..
I always try and help..
And I enjoy being here on xda..
Ps- Indian??
Sent from right here.. Using my Beast Note 2...!!
Click to expand...
Click to collapse
Yes bro. Me Indian. Loving your tweaks. Keep posting.
pageniao said:
i am on asv0
so i used 1175mv with 1600mhz
-25mv with -100mhz
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Hi mate..
Sorry for being a noob..
But what's asv0..
For you from my Be(a)st Note2...!!
geekynoob said:
Hi mate..
Sorry for being a noob..
But what's asv0..
For you from my Be(a)st Note2...!!
Click to expand...
Click to collapse
if you on perseus kernel .
open /sys/devices/system/abb/abb_info
as txt .
you can find your ASV values
I am on ASV 0
asv values from 0 to 13
the bigger the better. lower voltage can be used.
sorry my poor english.:banghead:
Sent from my GT-N7100 using xda premium
Awesome settings Thanks alot. Awesome dev as well.
Sent from my GT-N7100 using xda app-developers app
matttheman said:
Awesome settings Thanks alot. Awesome dev as well.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Your welcome mate...
I am no dev...
Learning..
For you from my Be(a)st Note2...!!
Andreilux has abandoned us.... Perseus kernel for the S3 and Note 2 are EOL with no further development under 4.3..
T_T
Here's what you need;
-A 4.4 ROM that supports Expanded Desktop
-NightMode Application ( https://play.google.com/store/apps/details?id=pt.bbarao.nightmode)
Here's what you do;
-Activate Expanded Desktop
-Activate NightMode to the brightness you prefer
-Done!
Here's what you do to revert;
-Deactivate NightMode
-Deactivate Expanded Desktop
Have fun in the dark!
Regards,
Furrydaus
a much needed feature! Nice one!
prabhav.3892 said:
a much needed feature! Nice one!
Click to expand...
Click to collapse
I didn't develop it so go and leave a good review to the develop of the night mode app. They deserve the credit
Sent from my Xperia SP using XDA Premium 4 mobile app
Have fun posting Howto's for every app in the Play store...
Gamm86 said:
Have fun posting Howto's for every app in the Play store...
Click to expand...
Click to collapse
Although that sounded rude, thanks
Sent from my Xperia SP using XDA Premium 4 mobile app
The above app uses battery and ram
For reducing screen brightness without third party apps I use script provided by mrsteve555 for cm11 in PA thread.
mn399 said:
The above app uses battery and ram
For reducing screen brightness without third party apps I use script provided by mrsteve555 for cm11 in PA thread.
Click to expand...
Click to collapse
Would it be alright if you post the script here? I would like to look at it. Thanks
If its too long, hide the post with the hide function and do remember to use the code function
Sent from my Xperia SP using XDA Premium 4 mobile app
Furrydaus said:
Would it be alright if you post the script here? I would like to look at it. Thanks
If its too long, hide the post with the hide function and do remember to use the code function
Sent from my Xperia SP using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=54876322&postcount=622
have you tried this app? Root Dim https://play.google.com/store/apps/...utm_medium=AndroidPIT&utm_campaign=AndroidPIT
le grande magnetto said:
have you tried this app? Root Dim https://play.google.com/store/apps/...utm_medium=AndroidPIT&utm_campaign=AndroidPIT
Click to expand...
Click to collapse
Does the same thing just with root. I generally use nightmode instead
Sent from my Xperia SP using XDA Premium 4 mobile app
The Camera app has just been updated on my Z5 .. unfortunately, I forgot to take a screenshot of the changelog (but mostly it seemed to be about the UI and Superior Auto seems to be improved). EDIT: see @schecter7's post directly below mine for the changelog!
Looking at it, the UI was changed the same as how it was supposed to look like based on the promo videos and demo units from before. Sadly, there is no manual shutter speed yet as far as I can see, manual focus, and still cannot change ISO when shooting at 20MP/23MP mode.
We all know thought that Sony tends to have 'hidden' changes to their algorithm whenever they have these kinds of updates as evidenced from updates before. I'm still waiting for the complete changelog from XperiaBlog but so haven't time yet to do any extensive testing.
Did you notice any significant changes in yours apart from the UI changes?
Changelog attached
Edit: Now we could swipe to change modes, added another (third) screenshot.
schecter7 said:
Changelog attached
Click to expand...
Click to collapse
is it just aesthetic changes or quality/improvement in terms of image processing?
schecter7 said:
Changelog attached
Click to expand...
Click to collapse
Huge help! Thanks!
CAn someone upload the APK file. Many thanks
OK I found !
jjwrongjj said:
CAn someone upload the APK file. Many thanks
OK I found !
Click to expand...
Click to collapse
Limitet manual , no iso at 20-23 mp
Low light photo blure decreased
Left blure rest with no change
I installed the update and I've noticed that the problem with noise in low-light... in fact ingeneral is a bit better. It's still not as good as the galaxy line as far as crispness / saturation, but I don't think that's Sony's goal. For real, if I could install the Samsung camera app and libraries on this phone, I'd be all over that. Anyway it does seem to have improved, noticeably.
Where can I change the GPS tag and save folder location in this new app? Can't find it. Thanks.
Sent from my E6653 using Tapatalk
cklow01 said:
Where can I change the GPS tag and save folder location in this new app? Can't find it. Thanks.
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
Sent from my Xperia z5 using Tapatalk
Trying not to speak too soon as I've not done anything near a comprehensive test but there do seem to be improvements in processing, though not as marked as I had expected. The one biggie is the zoom: to my eyes, the processing on the zoom is much better now; the sharpening fringing on edges is much smaller, which means that it's less of an oil painting mess when you crop the zoomed image. And that's in low indoor light.
8MP generally seems sharper.
More to follow.
On the interface, I note that they've hidden the exposure and colour adjustments on SA in a menu (boo!) but given a button to switch them off when you want to return to auto (yay!) swings and roundabouts but generally pleased.
EDIT: Yep, definitely better digital zoom. Good enough to piece together small text (Just about legibly) at 5x. Trust me: it was not doing that before!
Ben36 said:
Sent from my Xperia z5 using Tapatalk
Click to expand...
Click to collapse
Interesting. Mine is like this... I have even cleared the camera data.
Sent from my E6653 using Tapatalk
So still no manual shutter speed in this update?
I thought that this would be a given since the Z5 supports manual features now, or don't they?
Is it possible to control the shutter speed with 3rd party apps? What's the resolution and the shutter speed range? Is it actually working or does the system override the manual settings?
cklow01 said:
Interesting. Mine is like this... I have even cleared the camera data.
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
Is it because mine is set on manual?
Sent from my Xperia z5 using Tapatalk
Ben36 said:
Is it because mine is set on manual?
Sent from my Xperia z5 using Tapatalk
Click to expand...
Click to collapse
Same problem even on manual.
Sent from my E6653 using Tapatalk
cklow01 said:
Same problem even on manual.
Click to expand...
Click to collapse
You seem to be missing the "More" option. That's where the rest of the settings in the screenshots posted here are.
cklow01 said:
Same problem even on manual.
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
Did yours update over your phone or by the linked app file?
Sent from my Xperia z5 using Tapatalk
The fisheye effect at long focal lengths at the edges of pictures appears to have been corrected. Definite colour balance tweaks, spot on now for me.
Ben36 said:
Did yours update over your phone or by the linked app file?
Sent from my Xperia z5 using Tapatalk
Click to expand...
Click to collapse
Through auto update. Tried uninstalled and reinstalled but no luck. Don't really want to format the phone just because of the camera.
Sent from my E6653 using Tapatalk
cklow01 said:
Through auto update. Tried uninstalled and reinstalled but no luck. Don't really want to format the phone just because of the camera.
Sent from my E6653 using Tapatalk
Click to expand...
Click to collapse
Have you tried the ultimate fix for all problems ever? Turn it off and back on again. Lol
Sent from my Xperia z5 using Tapatalk
Ben36 said:
Have you tried the ultimate fix for all problems ever? Turn it off and back on again. Lol
Sent from my Xperia z5 using Tapatalk
Click to expand...
Click to collapse
No help...
Sent from my E6653 using Tapatalk
Can anyone please tell me which app is causing this and how do I get rid of it?
slayed.in.mayhem said:
Can anyone please tell me which app is causing this and how do I get rid of it?
Click to expand...
Click to collapse
What do you mean? Can you please post some more information about the problem and your device setup please?
strongst said:
What do you mean? Can you please post some more information about the problem and your device setup please?
Click to expand...
Click to collapse
Plz refer to the screenshot I've posted and notice the top it. I'm currently on Resurrection remix nougat rom.
slayed.in.mayhem said:
Plz refer to the screenshot I've posted and notice the top it. I'm currently on Resurrection remix nougat rom.
Click to expand...
Click to collapse
As it is noon now the head of my notification panel looks like this, in the afternoon it'll change. Why is this happening? I didn't install any particular app to get this function.
slayed.in.mayhem said:
As it is noon now the head of my notification panel looks like this, in the afternoon it'll change. Why is this happening? I didn't install any particular app to get this function.
Click to expand...
Click to collapse
Weather? It looks like this...
slayed.in.mayhem said:
As it is noon now the head of my notification panel looks like this, in the afternoon it'll change. Why is this happening? I didn't install any particular app to get this function.
Click to expand...
Click to collapse
Why you mess with settings when you don't understand them.
It is called dynamic header images and it is in rom setting , set it to none.
Sent from my Lenovo Zuk Z1 using XDA Labs
Sharma_Ji said:
Why you mess with settings when you don't understand them.
It is called dynamic header images and it is in rom setting , set it to none.[/QUOT
Thanks
Click to expand...
Click to collapse
slayed.in.mayhem said:
Sharma_Ji said:
Why you mess with settings when you don't understand them.
It is called dynamic header images and it is in rom setting , set it to none.[/QUOT
Thanks
Click to expand...
Click to collapse
Hit thanks, not write thanks.:silly:
Sent from my Lenovo Zuk Z1 using XDA Labs
Click to expand...
Click to collapse
Sharma_Ji said:
slayed.in.mayhem said:
Hit thanks, not write thanks.:silly:
I'm currently on Pixel Experience oreo rom. After root applying a font from typeface my lockscreen clock looks like this.:/
Sent from my Lenovo Zuk Z1 using XDA Labs
Click to expand...
Click to collapse
Click to expand...
Click to collapse