Related
My DHD is running RcMix 3d v3.392 , I tried factory reset by go to setting->storage->factory reset . It complete and the phone restart but after htc screen my device was stuck on android black screen . I tried remove the battery, put it in after few seconds, hold vol- and press power to get into bootloader but it start and stuck at android screen again . I tried many time but can't get to bootloader . Was the vol- button died ??? I used it normal before . If the vol- button die how to get into bootloader ( . Anybody save me with problem . Thanks you very much
I stuck at screen like this
Hello, i had this problem before and asked someone in these forums. Apparently when you do a factory reset this way it removes some of the custom rom's essential files and that is why you get this error. This is the way to do it. Do a Data wipe/cache wipe/dav wipe using either 4ext/cwm/etc.... and flash rom. That's it. Don't do a factory reset in the rom or else you will get this problem. What i do is i keep the rom and superwipe in my memory card and follow that process above if i ever need to reset the phone.
You need to pull battery out>put it back in>power on+vol down. Not too sure how you can test if the volume down button is broken sorry about that.
dragon884 said:
Hello, i had this problem before and asked someone in these forums. Apparently when you do a factory reset this way it removes some of the custom rom's essential files and that is why you get this error. This is the way to do it. Do a Data wipe/cache wipe/dav wipe using either 4ext/cwm/etc.... and flash rom. That's it. Don't do a factory reset in the rom or else you will get this problem. What i do is i keep the rom and superwipe in my memory card and follow that process above if i ever need to reset the phone.
You need to pull battery out>put it back in>power on+vol down. Not too sure how you can test if the volume down button is broken sorry about that.
Click to expand...
Click to collapse
Thankxxx for your share . I tried with button not success . Then I connect my device with power off to PC . Start cmd and run "adb reboot bootloader" and very happy it work . I'm running on coredroid rom .
Ok, I flashed Trinity kernel with no issues, phone booted up ran great. Then I pushed PA to my phone to flash using the Nexus Root Toolkit and when it rebooted me into TWRP, I proceeded to wipe sys and dalvik and try to flash the zip. It failed. No big deal, some of my flashes have failed before on this N7. Not sure why, but I usually just reboot and press on. This time however, as it starts to boot I get a msg saying "unfortunately Setup Wizard has stopped" with an "ok" button, but when I press the "ok" button it just cycles back to the same button. I have tried powering down, but the Ok button sits on top of the power off confirmation button and so I can't even turn it off to reboot into recovery mode. Anyone got any suggestions? The toolkit won't seem to reboot it into recovery either, not sure why unless the ok button is overriding everything. Help?
UPDATE: I managed to get the trick of hitting the ok button fast enough to get to the power confirm button behind it, but when I boot it into recovery mode, I get the droid with the red ! mark and can't seem to get it to do anything else. I have tried booting into recovery from Toolkit, but it says I need to put it into USB debugging mode, which of course I can't do because I can't get past the failed setup...
UPDATE: Ok, I have managed to finagle it into resetting to factory stock ROM. So I have it up and running again and just have to start from scratch. But at least I am able to.
How'd ya do that
Lazarus416 said:
Ok, I flashed Trinity kernel with no issues, phone booted up ran great. Then I pushed PA to my phone to flash using the Nexus Root Toolkit and when it rebooted me into TWRP, I proceeded to wipe sys and dalvik and try to flash the zip. It failed. No big deal, some of my flashes have failed before on this N7. Not sure why, but I usually just reboot and press on. This time however, as it starts to boot I get a msg saying "unfortunately Setup Wizard has stopped" with an "ok" button, but when I press the "ok" button it just cycles back to the same button. I have tried powering down, but the Ok button sits on top of the power off confirmation button and so I can't even turn it off to reboot into recovery mode. Anyone got any suggestions? The toolkit won't seem to reboot it into recovery either, not sure why unless the ok button is overriding everything. Help?
UPDATE: I managed to get the trick of hitting the ok button fast enough to get to the power confirm button behind it, but when I boot it into recovery mode, I get the droid with the red ! mark and can't seem to get it to do anything else. I have tried booting into recovery from Toolkit, but it says I need to put it into USB debugging mode, which of course I can't do because I can't get past the failed setup...
UPDATE: Ok, I have managed to finagle it into resetting to factory stock ROM. So I have it up and running again and just have to start from scratch. But at least I am able to.
Click to expand...
Click to collapse
May I ask how you finagled it into resetting to factory stock ROM? I am having the same issue but not able to get out of the loop
jasonmrouse said:
May I ask how you finagled it into resetting to factory stock ROM? I am having the same issue but not able to get out of the loop
Click to expand...
Click to collapse
Hold all three hardware buttons for 30 seconds and the device reboots to the bootloader. Then, fastboot flash the stock image.
jasonmrouse said:
May I ask how you finagled it into resetting to factory stock ROM? I am having the same issue but not able to get out of the loop
Click to expand...
Click to collapse
You can get to the bootloader (fastboot mode) FROM ANY STATE.
Read that again - from any state.
See "bootloader interrupt" in this thread:
[REF] Nexus 7 Button Combinations
cheers
I know that there are loads of threads on XDA regarding bricked G2s (and how to fix them), and believe me, I have scoured every one I could find. None of them had the same situation as me. Here it is:
- tried upgrading rooted G2 (d802) to KitKat through PC suite
- on reboot, phone gives repeated "Unfortunately, com.android.systemui has stopped" messages
- this prevents me from doing anything - cannot start developer tools/USB debugging; cannot software factory reset; may as well have a broken screen
- tried booting into recovery - there seems to be no recovery
- I have booted into recovery before the update; I tried using the same method - nothing
- I googled for alternate methods, none of them worked either
- has download mode - what does this enable me to do?
- tried using a 'restore to stock' flashing tutorial on XDA - didn't work
- it is here if anyone was curious
- cannot access through ADB
- TWRP gone
- have no idea how to access through fastboot
Any other options available? Is there any other way to enable USB debugging, trigger fastboot, access the phone through ADB, or factory reset it?
rtswan1211 said:
I know that there are loads of threads on XDA regarding bricked G2s (and how to fix them), and believe me, I have scoured every one I could find. None of them had the same situation as me. Here it is:
- tried upgrading rooted G2 (d802) to KitKat through PC suite
- on reboot, phone gives repeated "Unfortunately, com.android.systemui has stopped" messages
- this prevents me from doing anything - cannot start developer tools/USB debugging; cannot software factory reset; may as well have a broken screen
- tried booting into recovery - there seems to be no recovery
- I have booted into recovery before the update; I tried using the same method - nothing
- I googled for alternate methods, none of them worked either
- has download mode - what does this enable me to do?
- tried using a 'restore to stock' flashing tutorial on XDA - didn't work
- it is here if anyone was curious
- cannot access through ADB
- TWRP gone
- have no idea how to access through fastboot
Any other options available? Is there any other way to enable USB debugging, trigger fastboot, access the phone through ADB, or factory reset it?
Click to expand...
Click to collapse
ok well first entering factory reset(or custom recovery)
-before d80220d the key combination to enter factory reset is with phone fully powered off hold volume down+power and when lg logo pops up let go and hold volume down+power
-after d80220d(or any update that includes knock code) the combination was changed(pretty sure it had to do with the fact that on kitkat we used stock recovery to install root and everyone who couldn't get in via adb just had to use button combination which everyone knew) and the new combination with phone fully powered off is to hold volume down+power and when lg logo pops up let go and hold onto volume up+down don't touch power, if you have tried these then you should mention it
XxZombiePikachu said:
ok well first entering factory reset(or custom recovery)
-before d80220d the key combination to enter factory reset is with phone fully powered off hold volume down+power and when lg logo pops up let go and hold volume down+power
-after d80220d(or any update that includes knock code) the combination was changed(pretty sure it had to do with the fact that on kitkat we used stock recovery to install root and everyone who couldn't get in via adb just had to use button combination which everyone knew) and the new combination with phone fully powered off is to hold volume down+power and when lg logo pops up let go and hold onto volume up+down don't touch power, if you have tried these then you should mention it
Click to expand...
Click to collapse
You are an absolutely beautiful person. I think I have fallen in love with you. THANK YOU SOOOO MUCH! I swear I found at least 5 different tutorials and none mentioned this.
If your name doesn't go down in history, the world is cruel and unjust.
Sorry. But thanks. SO MUCH.
Im facing the same problem, wanted to go back stock and had CloudFlexy 2.3 installed. Did the firmware flashing, got stuck with procesesses stopping and couldn't boot into factory reset.
Found this thread and got to factory reset, tried factory reset but now my phone only has android figure with spinning thingy inside of it going on in my screen. ADB wont recognize the phone.. I think i need to flash stock rom or something but not sure how to. Please help, how did you proceed rtswan1211 after getting the factory reset screen?
Edit:
After waiting for 'bout 10mins for something to happen i just tried to reboot the phone and still the same spinning android logo came on. Finally plugged in the USB cable and phone booted up with working software. Had me really worried.
bakufu said:
Im facing the same problem, wanted to go back stock and had CloudFlexy 2.3 installed. Did the firmware flashing, got stuck with procesesses stopping and couldn't boot into factory reset.
Found this thread and got to factory reset, tried factory reset but now my phone only has android figure with spinning thingy inside of it going on in my screen. ADB wont recognize the phone.. I think i need to flash stock rom or something but not sure how to. Please help, how did you proceed rtswan1211 after getting the factory reset screen?
Edit:
After waiting for 'bout 10mins for something to happen i just tried to reboot the phone and still the same spinning android logo came on. Finally plugged in the USB cable and phone booted up with working software. Had me really worried.
Click to expand...
Click to collapse
after tried several times, FACTORY RESET successfully done.
Previously, I updated the 20G through custom recovery and forgot to wipe clean. After completely installed the 20G, error shows blocking the screen and the custom recovery was gone. after several attempted, I succesfully done by:
- turn off the phone completely
- press vol down and power
- release immediately, upon LG logo pop up, and
- press vol up and vol down
- Factory reset menu pop up
Seems now is harder than before, I need couple times to try before succeed
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
triby said:
Dear XDA friends,
i always hoped not to be one of those guys, who f****d up their phones to the point of no return. I really screwed up this time. Well, here I'am writing you about my screw up.
I unlocked, rooted, flashed and repaired all kinds of android phones in the past years, never without problems, but I could always fix it somehow. Not so much this time.
Now I'm stuck at Bootscreen with the Zuk logo. I even have problems pinging the phone via ADB.
Sorry for my noobish question guys. Any help would be much appreciated.
Click to expand...
Click to collapse
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Life Engineer said:
I got this translated from a chinese website:
For fastboot mode:
The phone turned off; keep the connection turned off the data cable to the computer, press: [volume down key] [Power Key] waiting to enter the fastboot mode.
For recovery:
Turn off the device
Press and hold Power key
When vibrates Volume UP key + Volume Down key about 10 seconds
Release all key when Android logo appear then you will see Android System Recovery
Use Volume key to select Menu
Use Power key to Confirm
Can you enter any of these 2 modes?
Click to expand...
Click to collapse
thank you life engineer! No luck . I'll try to send it back. Thanks again for you're help. Much appreciated!
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
rusty96379 said:
hi xda, i am facing thesame problem with my lenovo zuk z1 phone. its on a bootloop. i can enter the recovery by pressing both up and down vol. keys, i have wiped data/factory reset and wiped cache partition and rebooted but it doesnt fix.. I tried to reboot to bootloader but is stuck on fastboot mode screen. ive tried to search a solution but none have helped. The connection between phone via usb to computer only lasts like 2 secs. during boot then it disconnects again beacuse of the bootloop. Can anyone pls. help.
Click to expand...
Click to collapse
How does the bootloop look like?
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
The bootloop is just showing the ''ZUK logo'' in the middle of screen and "'powered by Android logo'' below,and the phone vibrates everytime it flashes these logos. I tried QFIL but it can only detects the unit on the first boot or first flash that is 2 secs. only from the time i press the power button, and then it disconnects and not detect the unit again. Does anyone know where can i find the scatter file , MTK ROM for zuk z1, i would like to try the SP flasher tool. Or if anyone have any idea how to solve this issue on lenovo zuk z1,pls. help.tnx
Can y get to fastboot ?
im facing the same problem after i had the stupid idea to lock the bootloader again, before that i flashed the phone successfully with the cm mod recovery and cm 13.
Has anyone found a solution to this ? or do i have to send it back ?
What i did exactly :
I locked the bootloader again and just to test it i tried flashing the recovery again , ofcourse it didn't work which was what i wanted.
Afterwards i rebootet the bootloader with sudo fastboot -i 0x2b4c reboot
now im stuck in a bootloop that i cant even stop , in other words i cant turn my phone off nor can i access the recovery or fastboot
Im feeling so stupid that i locked it again .... i will try to get into recovery after my phone ran out of battery but so far it looks quite bad...does anyone know if i will get a replacement even though it was my fault ? ( i don't need to say that it was my fault ..and the bootloader is now locked again )
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
CPP11 said:
UPDATE::
I found a promising thread about this problem, i will report back here if i was successful.
-> forum.cyanogenmod.org/topic/121913-after-nighty-update-to-20160212-the-zuk-is-bricked-without-salvation/
Click to expand...
Click to collapse
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Need some help
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Any solution?!
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
---------- Post added at 01:20 AM ---------- Previous post was at 01:08 AM ----------
Amen Ghazy said:
And after that what to do I can get it to recovery and the fastboot mod but after that what to do my phone like this for a month now
Click to expand...
Click to collapse
did you solve it i have exactly the same problem for a month now as well (Exactly same situation) Please help
Please help , same problem
I am facing same issue too from 2 days. I didnt even try to flash custom roms or play with boot loader or recovery or anything. All of a sudden my phone entered boot loop. After two three bootloops phone is entering "12 apps optimized of 230 apps" mode, completing optimizing all apps and then failing to start apps, entering boot loop again.
Effort made so far to fix -
1) Went to recovery and cleared cache - didnt work
2) Went to recovery and did factory reset - factory reset did happen but boot loop didnt stop, I realized that factory reset happened because now its saying optimizing 120 apps instead of my 230 apps during the bootloop.
3) Went to recovery, Entered fast boot mode but not able to connect to PC. Fastboot devices is not showing anything. I made sure proper driver is installed after researching on XDA.
4) Went to recovery, Tried "Install update". Didnt install anything but browsed through folder structure and realized my data is intact
It will be great if someone can help me atleast recover my data before I handover phone to service center for fixing boot loop issue.
Same problem
crian said:
How does the bootloop look like?
Click to expand...
Click to collapse
i have same problwm what to do plz help mme
Abhishekjain31291 said:
i have same problwm what to do plz help mme
Click to expand...
Click to collapse
Explain in detail
errecez1 said:
pressing Vol + & Vol - the connecting the USB cable entered bootloader mode. YEAH!!!!
Click to expand...
Click to collapse
The link is not accessible now. Can you let me know what you have done. My phone is in a boot loop now and showing only Logo and 'powered by Android' message. It keeps turning on and off again and again.
Guys when u are in fast boot mode .. pls install Twrp ... After insatlling that press power button abd vibration comes hold volum doen+volume up button at the same time ..
Then u will be getting recovery Twrp mode .. then connect it to pc and u will see internal srorage in pc...now u have to copy any rom to the phone and install it via Twrp ... Thats all
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press POWER KEY only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
EDITED:
While connecting to pc and by pressing Volume key you also need to press Power key for 1 sec or 2 sec until it gets detected. Thanks addicted777 (for tip)
rajendra0072 said:
Sorry For Re-posting Here. This is Solution
Why this is happening ?
Due to Dirty Flash from Zui or from COS/CMOD but suddenly Bootloader gets locked
May be Due to Some Custom Rom which only works with Old Bootloader ( And you are on latest 2.5 Zui QPST Flash)
Reasons are many. I also did same mistake. I flashed ZUI 2.5 using QPST then unlock bootloader using official site installed twrp after wiping cache system and data , Installed Lineage 0S JAN Build then without rebooting installed Lineage Nightly build (Latest) with Gapps After rebooting Phone goes into Restart endless loop on ZUK Logo. Blink and Vibrate .. After 1hr I figured it out but its 5am So slept.
HOW TO FIX ENDLESS REBOOT ON ZUK Logo ?
-> Identity vibrate patterns (Press Power Key I count 6- 7 Vibration pattern ) After long Vibrate immediately remove finger from power key.
->Once its Done (Phone completely off)
Download QPST and Official COS QPST from this Link https://goo.gl/InWQji OR https://goo.gl/iqrnlI (I am personally Very Thankful to D tech Terminal for posting Wonderful video on Youtube https://www.youtube.com/watch?v=4Dl6JkAVpuM
<- please install all drivers and software.->) @ankurpandeyvns Thanks bro.
Main Task is here and Lots of Patience is required and You also need to be very Blazing fast to achieve this.
-Once you download and install Qpst open Qfil
-Now press Volume Up only and connect USB (Just press only for 1 sec It will vibrate and connect)
-Without waiting hit Download button.
-Voila It will start flashing your phone again and Hence Your phone is now Revive..
-Once Revive You can use it to again flash custom Rom or stick to stock Rom if you want.
Keep Flashing !!!
Patience is Key here. And Don't lose hope.
:good:
Click to expand...
Click to collapse
I'm happy that my videos were helpful. Enjoy.
keeps vibrating showing logo again and again, neither won't turn off neither turn on till for so many hour until the charge is empty....
how to stop boot loop ??????
can you provide videos how to stop boot loop ??????
i have a lg spirit H440F
I might have delete some files in the root folder , result is a blank screen
I cannot enter the phone
It s possible to see the download mode when i push volume
factory reset doesnt work
What can i do ? or is the phone dead?
thanks a lot
papilonaa said:
i have a lg spirit H440F
I might have delete some files in the root folder , result is a blank screen
I cannot enter the phone
It s possible to see the download mode when i push volume
factory reset doesnt work
What can i do ? or is the phone dead?
thanks a lot
Click to expand...
Click to collapse
Turn off the phone. Plug the PC end of the USB cable in the PC. Press and hold volume up and plug in the USB cable in the phone. Hold it like that. After a couple of seconds, you should be in download mode. Then use LG Flashtool/LGUP to flash Lolipop/Marshmallow.
now stuck on logo
Fobos531 said:
Turn off the phone. Plug the PC end of the USB cable in the PC. Press and hold volume up and plug in the USB cable in the phone. Hold it like that. After a couple of seconds, you should be in download mode. Then use LG Flashtool/LGUP to flash Lolipop/Marshmallow.
Click to expand...
Click to collapse
Helo thanks a lot to you for helping me
since that day i could le't the LG recognize on the xp and flash it with the usual tool.
Now after the process finished, i reboot and it stay stuck on the logo, some time come for a second the green android who say erasing process, then again the logo
That s it
please what next can i try?
thanks
papilonaa said:
Helo thanks a lot to you for helping me
since that day i could le't the LG recognize on the xp and flash it with the usual tool.
Now after the process finished, i reboot and it stay stuck on the logo, some time come for a second the green android who say erasing process, then again the logo
That s it
please what next can i try?
thanks
Click to expand...
Click to collapse
what frimware did you flash? can you try performing a factory reset? to do so:
1) turn off the phone
2) press and hold volume down + power keys until the lg logo appears
3) let go of the both keys for 1 second
4) immediately press and hold them again (both keys) until you get to a factory reset screen. Follow the onscreen instrucitons.
Fobos531 said:
what frimware did you flash? can you try performing a factory reset? to do so:
1) turn off the phone
2) press and hold volume down + power keys until the lg logo appears
3) let go of the both keys for 1 second
4) immediately press and hold them again (both keys) until you get to a factory reset screen. Follow the onscreen instrucitons.
Click to expand...
Click to collapse
Thanks a lot
i could factory reset, but after many try , i got to download mode, and i could flash ... i had realy to use the country rom, where i bought the phone, in my case , it work only whith the Colombien one....none other works, Now shall i try to flash with a cyanogène or a mui? would it works?
papilonaa said:
Thanks a lot
i could factory reset, but after many try , i got to download mode, and i could flash ... i had realy to use the country rom, where i bought the phone, in my case , it work only whith the Colombien one....none other works, Now shall i try to flash with a cyanogène or a mui? would it works?
Click to expand...
Click to collapse
There's no custom roms for Qualcomm Spirit. At least not yet.