Related
I tried downloading 2.3.1 through rom manager, but it failed for some reason. So I accidentally downloaded it through the phone, and as soon as it began installing, I got a little Android image with a triangle that has an ! in it...How can i please fix this?
edit:i tried holding down the up and power keys with no luck...someone please help
monkeytuner said:
I tried downloading 2.3.1 through rom manager, but it failed for some reason. So I accidentally downloaded it through the phone, and as soon as it began installing, I got a little Android image with a triangle that has an ! in it...How can i please fix this?
edit:i tried holding down the up and power keys with no luck...someone please help
Click to expand...
Click to collapse
You might get more help if you rename your topic title to something more descriptive.
Second, try searching the forum; this has been discussed in numerous threads on both this forum and the developer's section, along with how to fix it.
Try the threads about the update, or dialing a certain code to force it manually (that's where I learned the timing trick to get into stock recovery on the NS). On the screen you're at, try pressing and holding power, then pressing/holding volume up, that should get you into stock recovery.
Also, if you can get into fastboot, you can fastboot flash the CWM recovery back to the device. If you made an nandroid before doing anything, you can at least go back to the device's state before you tried the update.
i could not find anything on this issue on google or here
i tried doing vol up and power, but its still at the screen, and my computer doesnt recognize my phone
use the instruction on the topic to ROOT the phone
http://forum.xda-developers.com/showthread.php?t=875875
and in one of the steps you can use the ADB to push a good ROM back into the phone to be re-flashed
Try just pulling the battery.
If not, you'll have to use fast boot from the SDK. Just follow the howto at the top of this forum to flash original images.
thank you so much!
i locked my bootloader again, and i've been trying to get the 2.3.1 update, but everytime i do try, it freezes at the android warning sign. i also tried installing it via rommanager when i was rooted...whats going on?
any ideas what could be wrong?
monkeytuner said:
i could not find anything on this issue on google or here
i tried doing vol up and power, but its still at the screen, and my computer doesnt recognize my phone
Click to expand...
Click to collapse
monkeytuner said:
any ideas what could be wrong?
Click to expand...
Click to collapse
Are you able to get into Fastboot?
I wonder if part of your problem is that you relocked the bootloader. (Why'd you do that anyways? No advantage, imo.)
Fastboot oem unlock will completely wipe your phone, I mean WIPE EVERYTHING, including the sdcard (photos, music, some apps' data, etc), but such a wipe might get you back to stock firmware and stock recovery, then at least you could boot up. You could also then reflash CWM.
Before doing that, let's try this if you haven't:
Turn off phone.
Hold vol-up, then press/hold power.
You should then be in fastboot mode.
The timing's critical (on my phone anyways) for this step: Select recovery, and have your hands on the power button and volume button ready to push.
Watch the screen very closely, for a bout a half second or so, the screen will flash a box with an arrow dumping out onto the android dude. While that screen is showing, press/hold the power button, then press/hold the vol up button. Important to do the power button FIRST this time (at least it is on my phone).
You should then be able to get into the stock recovery.
Once there, maybe we can figure out where to go, but we need to know how messed up your phone is at this point.
Once in Recovery, you could try wiping cache if it's an option, then trying to reboot. Worth a shot, but not likely to work.
You could also do the factory reset wipe in there, this one shouldn't wipe your sdcard if there's anything critical/valuable on it. It will reset all your settings and logins and wipe the apps you've installed, though. Again, might let you boot up normally.
Alright so this is what Im looking for,
i was on a phone call last night and my phone screen just went blank, the touch button are glowing but screen is just blank dark. So i went into recovery and it gave me bunch of error, so i thought to hard reset it.
Ive been searching every where its tell me to hold the vol down and press the power and when the logo comes up release it, and a few other ways but nothing is working.. phone boots fine, goes thru that samsung animation and then then the black screen. Please help.
Almost...
Hold:
Volume UP
Middle button
Power button
that takes me to recovery man,,,,it only has wipe option and that aint working..
junooni.1980 said:
that takes me to recovery man,,,,it only has wipe option and that aint working..
Click to expand...
Click to collapse
Vol down power and home key for download
junooni.1980 said:
that takes me to recovery man,,,,it only has wipe option and that aint working..
Click to expand...
Click to collapse
Well, that is the menu that your looking for if you want to do a hard reset (WIPE). If it not working, then your phone is toast. Unless you want to try flashing it with another ROM using Odin. Which may work. (but very doubtful) There are tons and tons of threads here for you to researh your problem, but it sounds to me like the SD card has gone tits up. Wen u try to do a hard reset (wipe) what comes up on the screen after you select wipe??
But Vol up, middle button, and pwr is in fact the menu your looking for to do a Hard reset. (wipe)
If in fact your SD card is having issues, there is a thread floating around here somewhere, where some people have had sucess reviving their phone (and SD) using a series of flashes or something that may work.
Grashoper said:
Well, that is the menu that your looking for if you want to do a hard reset (WIPE). If it not working, then your phone is toast. Unless you want to try flashing it with another ROM using Odin. Which may work. (but very doubtful) There are tons and tons of threads here for you to researh your problem, but it sounds to me like the SD card has gone tits up. Wen u try to do a hard reset (wipe) what comes up on the screen after you select wipe??
But Vol up, middle button, and pwr is in fact the menu your looking for to do a Hard reset. (wipe)
If in fact your SD card is having issues, there is a thread floating around here somewhere, where some people have had sucess reviving their phone (and SD) using a series of flashes or something that may work.
Click to expand...
Click to collapse
Ok so i tired flashing with Odin, and it was success but after rebooting it still the same thing...button are lighting up but black screen. Can any one guide me to the right direction please??
Your phone is dead.
You will have to bring it to a store for an exchange for a new one.
urfase said:
Your phone is dead.
You will have to bring it to a store for an exchange for a new one.
Click to expand...
Click to collapse
I agree, go exchange. you should see the common unable to mount error in the recovery to confirm it's toast
junooni.1980 said:
Ok so i tired flashing with Odin, and it was success but after rebooting it still the same thing...button are lighting up but black screen. Can any one guide me to the right direction please??
Click to expand...
Click to collapse
Just flash your phone with odin to a 2.1 firmware (stock firmware, http://forum.xda-developers.com/showthread.php?t=846913 ) it should do the trick, if it's entering recovery and then let's you install a new firmware you're ok, but before installing a new firmware just take the battery out for 15-20 sec so the phone has no power to keep residual info from your previouse firmware.
Hi Folks
My tab only stuck Android logo, ask for password. i enter password then again comes android logo and nothing
I tried hard reset combination. but none worked for me. is there any solution to this problem ?
a solid hard reset combination ? or a rom which will recover my device from this state ?
Any help would be greatly appreciated.
Thanks & regards
subr4t4 said:
Hi Folks
My tab only stuck Android logo, ask for password. i enter password then again comes android logo and nothing
I tried hard reset combination. but none worked for me. is there any solution to this problem ?
a solid hard reset combination ? or a rom which will recover my device from this state ?
Any help would be greatly appreciated.
Thanks & regards
Click to expand...
Click to collapse
Sounds like you'll need to try to do a factory wipe from recovery and then flash a zip of the stock rom (which you'll need to copy to your SD card)
Did forget your own password or buy this one hot?
dottat said:
Sounds like you'll need to try to do a factory wipe from recovery and then flash a zip of the stock rom (which you'll need to copy to your SD card)
Did forget your own password or buy this one hot?
Click to expand...
Click to collapse
Probably not a good idea for him to answer that if it's the latter.
dottat said:
Sounds like you'll need to try to do a factory wipe from recovery and then flash a zip of the stock rom (which you'll need to copy to your SD card)
Did forget your own password or buy this one hot?
Click to expand...
Click to collapse
Thanks for reply
Trying to factory wipe by following some hard reset manual but none worked for me.
No, password i know still i can enter.
Trying to restore with Update or Full package.
Acer_A500_0.000.00_4.017.07_EMEA_CUS7_1311771237783_253e5e46.zip
Acer_A500_0.000.00_4.010.42_EMEA_GEN3_1311244577711_036d89ae New.zip
Tried with this 2 files, but none worked yet.
which file i ve to try from here ?
http://forum.xda-developers.com/showthread.php?t=1113878
??
anyone else ? i m still stuck
Did you try a full wipe of the tablet? Hold down the volume up key and the power button until the tablet vibrates. Release the power button while still holding the volume up key, and slide the screen lock button (next to the volume up key) to the right and then back to the left.
The screen should display 'Erasing Userdata', you can then release the volume key. It should then erase the cache, Acer says it can take 5-10 minutes to complete. The tablet should then reboot, and you may be able to get in from the stock settings.
If the tablets hangs at 'Erasing Cache' for more than 15 minutes, force a power down by holding in the power key. The try the power/volume/lock routine again.
subr4t4 said:
Tried with this 2 files, but none worked yet.
Click to expand...
Click to collapse
What doesn't work exactly? Did you get an error during installation? Or was installation successful but the problem still exists?
ThatGeekGuy said:
Did you try a full wipe of the tablet? Hold down the volume up key and the power button until the tablet vibrates. Release the power button while still holding the volume up key, and slide the screen lock button (next to the volume up key) to the right and then back to the left.
The screen should display 'Erasing Userdata', you can then release the volume key. It should then erase the cache, Acer says it can take 5-10 minutes to complete. The tablet should then reboot, and you may be able to get in from the stock settings.
If the tablets hangs at 'Erasing Cache' for more than 15 minutes, force a power down by holding in the power key. The try the power/volume/lock routine again.
Click to expand...
Click to collapse
Tried exactly same as u said, it shows "Erasing cach before sd update" then it brings recovery icon. nothing........
sc2k said:
What doesn't work exactly? Did you get an error during installation? Or was installation successful but the problem still exists?
Click to expand...
Click to collapse
Installation was 80% but not success........ stuck @ Recovery logo
anyone else with any other idea? m still stuck......
I have the same issues. I have tried installing new roms, and still get the same issues. Any ideas would be great
I once tried to use geno's partition resize, and after a reboot, it cannot boot into system anymore. Stuck at the huawei logo.
Since I'm quite familiar with linux, I tried this solution: http://forum.xda-developers.com/showthread.php?t=1971266
However, my linux installation didn't show any drives when it's in pink screen mode, so I'm pretty much stuck here.
In Windows 8 it did show two HUAWEI Technologies device (no drivers though) in pink screen mode.
I can't access recovery mode either, holding power + vol up only does normal boot for some strange reason. Anyone can help me out here?
ansarips said:
I once tried to use geno's partition resize, and after a reboot, it cannot boot into system anymore. Stuck at the huawei logo.
Since I'm quite familiar with linux, I tried this solution: http://forum.xda-developers.com/showthread.php?t=1971266
However, my linux installation didn't show any drives when it's in pink screen mode, so I'm pretty much stuck here.
In Windows 8 it did show two HUAWEI Technologies device (no drivers though) in pink screen mode.
I can't access recovery mode either, holding power + vol up only does normal boot for some strange reason. Anyone can help me out here?
Click to expand...
Click to collapse
try put official GB dload file on sd card, then put sd card in phone press power up+power down+power...
maybe it'll help you.
I tried that too, and it still bootloops. Not much luck.
Go to recovery and wipe everything. Then, reboot recovery, and then try partitioning again.
I can't get into recovery by pressing power + vol up. It just does normal boot (which bootloops).
If there would be any other way to get into recovery (such as via ADB or update.app) would be highly appreciated.
ansarips said:
I can't get into recovery by pressing power + vol up. It just does normal boot (which bootloops).
If there would be any other way to get into recovery (such as via ADB or update.app) would be highly appreciated.
Click to expand...
Click to collapse
Yes, you can boot into recovery via adb:
Code:
adb reboot recovery
But, you cannot use that until your phone is booted up.
If that doesn't work, you can follow these instructions to hard reset your phone:
http://www.hard-reset.com/huawei-u8800-ideos-x5-hard-reset.html
Good Luck.
I can't get it to do the hard reset either. It just boots normally, aside from the bootloop.
I believe I need to fix the partition first before I try to reinstall stock. I hear that stock doesn't work with custom partitions. Which is why I'd prefer to at least get some access to the device via USB in order to fix it.
Ah well. It's a failing device anyway. Even before the brick the camera doesn't work anymore, regardless of which ROM I choose. Maybe it's time to move on for me.
ansarips said:
I can't get it to do the hard reset either. It just boots normally, aside from the bootloop.
I believe I need to fix the partition first before I try to reinstall stock. I hear that stock doesn't work with custom partitions. Which is why I'd prefer to at least get some access to the device via USB in order to fix it.
Ah well. It's a failing device anyway. Even before the brick the camera doesn't work anymore, regardless of which ROM I choose. Maybe it's time to move on for me.
Click to expand...
Click to collapse
I have found someone who has solved this problem.
Go to this link. In the first post, the OP has shared the solution with us.
Try it, and Good Luck!
rqmok said:
I have found someone who has solved this problem.
Go to this link. In the first post, the OP has shared the solution with us.
Try it, and Good Luck!
Click to expand...
Click to collapse
Well, I tried this too (in fact I stated it in the first post) but pink screen mode isn't showing any device (I typed in "dmesg" in the Linux Terminal, none is found).
I appreciate your help, though. If I can solve the detection problem, I should be able to recover my phone using this method. I'd be happy to share some logs if it helps.
I got your back buddy
ansarips said:
Well, I tried this too (in fact I stated it in the first post) but pink screen mode isn't showing any device (I typed in "dmesg" in the Linux Terminal, none is found).
I appreciate your help, though. If I can solve the detection problem, I should be able to recover my phone using this method. I'd be happy to share some logs if it helps.
Click to expand...
Click to collapse
Hey, this is my first post well here it goes
Step 1 :- Format the sd card and put dload folder in it ( you'll get it from the official rom zip file)
Step 2 :- press and hold vol+ & vol- and then power button, it'll start upgrading
Step 3 :- now here is the tricky part!!! i was stuck here too and gone half mad well, let it reboot it will format cache etc and then bootloops, now turn off the device and then turn on pressing vol+ and power button, or u can try by pressing home, vol+ and power button, u'll b in recovery mode i.e in official rom builtin i guess.
Step 4 :- once in recovery, select reset factory default and clear partition cache, and then reboot!!!! Voila u will b able to finally boot successfully...
Now listen very carefully, u got only one chance here, cause if u reboot ur device again then bootloops will start again so in the first go, root the device by superoneclick and then install recovery i guess u knw all that and then u will be able to return to stock rom by flashing... once u've installed CWM then u r good to go bootloop wont effect ya SORRY FOR MY BAD ENGLISH THOUGH
I know that there are loads of threads on XDA regarding bricked G2s (and how to fix them), and believe me, I have scoured every one I could find. None of them had the same situation as me. Here it is:
- tried upgrading rooted G2 (d802) to KitKat through PC suite
- on reboot, phone gives repeated "Unfortunately, com.android.systemui has stopped" messages
- this prevents me from doing anything - cannot start developer tools/USB debugging; cannot software factory reset; may as well have a broken screen
- tried booting into recovery - there seems to be no recovery
- I have booted into recovery before the update; I tried using the same method - nothing
- I googled for alternate methods, none of them worked either
- has download mode - what does this enable me to do?
- tried using a 'restore to stock' flashing tutorial on XDA - didn't work
- it is here if anyone was curious
- cannot access through ADB
- TWRP gone
- have no idea how to access through fastboot
Any other options available? Is there any other way to enable USB debugging, trigger fastboot, access the phone through ADB, or factory reset it?
rtswan1211 said:
I know that there are loads of threads on XDA regarding bricked G2s (and how to fix them), and believe me, I have scoured every one I could find. None of them had the same situation as me. Here it is:
- tried upgrading rooted G2 (d802) to KitKat through PC suite
- on reboot, phone gives repeated "Unfortunately, com.android.systemui has stopped" messages
- this prevents me from doing anything - cannot start developer tools/USB debugging; cannot software factory reset; may as well have a broken screen
- tried booting into recovery - there seems to be no recovery
- I have booted into recovery before the update; I tried using the same method - nothing
- I googled for alternate methods, none of them worked either
- has download mode - what does this enable me to do?
- tried using a 'restore to stock' flashing tutorial on XDA - didn't work
- it is here if anyone was curious
- cannot access through ADB
- TWRP gone
- have no idea how to access through fastboot
Any other options available? Is there any other way to enable USB debugging, trigger fastboot, access the phone through ADB, or factory reset it?
Click to expand...
Click to collapse
ok well first entering factory reset(or custom recovery)
-before d80220d the key combination to enter factory reset is with phone fully powered off hold volume down+power and when lg logo pops up let go and hold volume down+power
-after d80220d(or any update that includes knock code) the combination was changed(pretty sure it had to do with the fact that on kitkat we used stock recovery to install root and everyone who couldn't get in via adb just had to use button combination which everyone knew) and the new combination with phone fully powered off is to hold volume down+power and when lg logo pops up let go and hold onto volume up+down don't touch power, if you have tried these then you should mention it
XxZombiePikachu said:
ok well first entering factory reset(or custom recovery)
-before d80220d the key combination to enter factory reset is with phone fully powered off hold volume down+power and when lg logo pops up let go and hold volume down+power
-after d80220d(or any update that includes knock code) the combination was changed(pretty sure it had to do with the fact that on kitkat we used stock recovery to install root and everyone who couldn't get in via adb just had to use button combination which everyone knew) and the new combination with phone fully powered off is to hold volume down+power and when lg logo pops up let go and hold onto volume up+down don't touch power, if you have tried these then you should mention it
Click to expand...
Click to collapse
You are an absolutely beautiful person. I think I have fallen in love with you. THANK YOU SOOOO MUCH! I swear I found at least 5 different tutorials and none mentioned this.
If your name doesn't go down in history, the world is cruel and unjust.
Sorry. But thanks. SO MUCH.
Im facing the same problem, wanted to go back stock and had CloudFlexy 2.3 installed. Did the firmware flashing, got stuck with procesesses stopping and couldn't boot into factory reset.
Found this thread and got to factory reset, tried factory reset but now my phone only has android figure with spinning thingy inside of it going on in my screen. ADB wont recognize the phone.. I think i need to flash stock rom or something but not sure how to. Please help, how did you proceed rtswan1211 after getting the factory reset screen?
Edit:
After waiting for 'bout 10mins for something to happen i just tried to reboot the phone and still the same spinning android logo came on. Finally plugged in the USB cable and phone booted up with working software. Had me really worried.
bakufu said:
Im facing the same problem, wanted to go back stock and had CloudFlexy 2.3 installed. Did the firmware flashing, got stuck with procesesses stopping and couldn't boot into factory reset.
Found this thread and got to factory reset, tried factory reset but now my phone only has android figure with spinning thingy inside of it going on in my screen. ADB wont recognize the phone.. I think i need to flash stock rom or something but not sure how to. Please help, how did you proceed rtswan1211 after getting the factory reset screen?
Edit:
After waiting for 'bout 10mins for something to happen i just tried to reboot the phone and still the same spinning android logo came on. Finally plugged in the USB cable and phone booted up with working software. Had me really worried.
Click to expand...
Click to collapse
after tried several times, FACTORY RESET successfully done.
Previously, I updated the 20G through custom recovery and forgot to wipe clean. After completely installed the 20G, error shows blocking the screen and the custom recovery was gone. after several attempted, I succesfully done by:
- turn off the phone completely
- press vol down and power
- release immediately, upon LG logo pop up, and
- press vol up and vol down
- Factory reset menu pop up
Seems now is harder than before, I need couple times to try before succeed