Phone stuck in boot screen
Warranty knox void 0 (0x0000)
What does it mean
I got a replacement phone coming
Will they charge me
After they receive mine
Or can I fix it
If knox is 0x0 then your warrenty is all good. If it's 0x1 then they may charge you. I had to claim mine in the insurance as I'd tripped knox cos Samsung repair said they would charge me if I went through them. Have you used doing to flash custom recovery or anything that isn't stock? If so that will trip knox. If not then you'll be fine.
Secure Download :Enbled
Knox Warranty Void: 0(0X0000)
RP swrev :B:4 K:1
please explain my Samsung note 5 come like this
Related
Hi,
I have a samsung S4 in Australia.
I have been having issues whenever I download or update any app on the phone through the google store. I have spoke to samsung and they are going to take my phone into get repaired. I have rooted my phone using SUPERSU. Did a factory reset once it started playing up.
My question is how do I tell if my phone is KNOW void. I have red allot of the forums and they all show you what your phone looks like when it is void. 0x1 and when it is not 0x0.
But my phone when I go into download mode does not even have the KNOX lines.
The lines are as below, there is no mention of KNOX.
------
ODIN MODE
PRODUCT : GT-19505
SYSTEM STATYS: Official
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLED
---
However there is a KNOX icon in my applications through the settings of my phone.
How do I check to see if they are going to return it and say I have jail breaked it. If it is not KNOX-VOID then what else do I have to do to ensure they cant tell.
Regards,
Hello,
Looking online for answers, I keep running into this thread. So I'll post here as well.
I have SGH-T999L [T-Mobile USA]
ODIN MODE
PRODUCT NAME: SGH-T999L
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 0
BOOTLOADER RP SWREV: 1
Notice on this display I also lack the KNOX WARRANTY COUNTER: 0x0 or 0x1
I have Triangle Away and that shows Binary Counter = 0.
I also did a factory reset after rooting and everything is ok. I had issues once I rooted getting apps from Google Play. Simple reboot worked ok and phone has been stellar since. I just would like to know the full details of checking for a phone like the OP or mine.
I'll assume since mine has Warranty Bit = 0 I'm safe but confirmation would be nice.
Thank you,
Kent C.
lahhh said:
Hi,
I have a samsung S4 in Australia.
I have been having issues whenever I download or update any app on the phone through the google store. I have spoke to samsung and they are going to take my phone into get repaired. I have rooted my phone using SUPERSU. Did a factory reset once it started playing up.
My question is how do I tell if my phone is KNOW void. I have red allot of the forums and they all show you what your phone looks like when it is void. 0x1 and when it is not 0x0.
But my phone when I go into download mode does not even have the KNOX lines.
The lines are as below, there is no mention of KNOX.
------
ODIN MODE
PRODUCT : GT-19505
SYSTEM STATYS: Official
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: ENABLED
---
However there is a KNOX icon in my applications through the settings of my phone.
How do I check to see if they are going to return it and say I have jail breaked it. If it is not KNOX-VOID then what else do I have to do to ensure they cant tell.
Regards,
Click to expand...
Click to collapse
You can be relaxed. Your phone is using one old bootloader (android 4.2.2), this means KNOX free. You have full warranty . You have to know that are 2 types of KNOX:
1. Knox bootloader -> Appears in DOWNLOAD MODE (KNOX:0X0 or KNOX:0X1).
- 0x0: Full warranty
- 0x1: Void warranty
2. Knox app -> Appears close to ur apps. This is an application for protect the phone
---------- Post added at 01:05 AM ---------- Previous post was at 12:58 AM ----------
KentC. said:
Hello,
Looking online for answers, I keep running into this thread. So I'll post here as well.
I have SGH-T999L [T-Mobile USA]
ODIN MODE
PRODUCT NAME: SGH-T999L
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECUREBOOT: ENABLE
Warranty Bit: 0
BOOTLOADER RP SWREV: 1
Notice on this display I also lack the KNOX WARRANTY COUNTER: 0x0 or 0x1
I have Triangle Away and that shows Binary Counter = 0.
I also did a factory reset after rooting and everything is ok. I had issues once I rooted getting apps from Google Play. Simple reboot worked ok and phone has been stellar since. I just would like to know the full details of checking for a phone like the OP or mine.
I'll assume since mine has Warranty Bit = 0 I'm safe but confirmation would be nice.
Thank you,
Kent C.
Click to expand...
Click to collapse
In your case you have different model of phone. But is more or less same:
- Warranty Bit: 0 -> Full warranty
- Warranty Bit: 1 -> Void warranty
Sir,
Thank you very much! Your input is appreciated, scary at this is, this maybe the first thread online with this simple layout of information.
V.4.3 - Rooted using MrW0lf Root Vid on Youtube [If anyone wants the easy free way with Windows 8]
I know my Verizon S5 has been rooted before, but now it is no longer rooted and I would like to check my Knox status. How am I able to do this? I did the Vol. down, home and power button and that didnt tell me the KNOX WARRANTY VOID.
It says "Knox Warranty Void:" If it shows 0x0 you are fine and knox is not tripped, however, if it shows something other than 0x0, it is tripped...
Just download "phone info" from the app store and it should tell you whether you tripped knox or not.
Sent from my SM-G900V using Tapatalk
Any one know what mean this?In download mode apear knox 0x1 (2) . I try to flash official but the same.
I believe mine is the same, the previous owner said this is because the device has been rooted.
That happened wen you flash a costum firmware,kernel or recovery!!!that flag you Knox counter(samsung warranty void)!!!!
Also check this out:
http://www.kingoapp.com/help/samsung-knox-counter.htm
I apologize if this is already here, I could not find it using mobile app search. I have a Verizon Note 3 that says SM-N900V both in Odin mode and in settings. However, in Odin mode it doesn't say anything at all about KNOX. No version or warranty or anything similar. The only place it mentions KNOX is also in the settings, and it aayd version 2.3. Every image I've seen pertaining to the Verizon model shows that it has this. I'm curious if mine has the KNOX firmware or just the software?
knox is implemented on the kernel. you can check the status of it if you download knox checker at the play store or going to bootloader. but other than that those are just software check's. to my knowledge
I'm referring to the line in Odin mode that says "KNOX WARRANTY VOID 0x0"(or 0x1 if tampered with). This is absent from mine. There is no mention of KNOX at all in Odin mode, this confused me because I was under the assumption the Verizon model had this.
Pretty sure you don't use Odin for Knox check. Its either volume up power and home button or volume down can't remember. Download mode or something. Some one will chime in I'm sure.
Sent from my SM-N900V using XDA Free mobile app
I would post pics or links if it would let me. To the best of my knowledge, in Odin (download) mode on the phone, most Samsung phones list whether Knox is implemented in the kernel as well as if the phone has been tampered with. The line I have seen in most pics says either "KNOX WARRANTY VOID" or "WARRANTY BIT" followed by a number showing whether the phone has been rooted or tampered with. It shows 0x0 or 0 for phones that haven't been rooted and 0x1 or 1 for phones that have. I am only trying to figure out why it is absent on mine, while I've read that the N900V has this. I'm trying to figure this out because I want to root the device and it makes it difficult when everything but the model number is different from the how-to methods
EDIT: The firmware mine is running is N900VVRUEOF1. And download mode looks like this:
ODIN MODE
PRODUCT NAME: SM-N900V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE (CSB )
RP SWREV: S1, T1, R1, A4, P1
SECURE DOWNLOAD: ENABLE
UDC START
Hello.
Recently i bought a new s7 edge.
First thing i did was install the stock firmware from my country (since the phone i bought was from spain).
Then i noticed this:
SWREV: b:1 k:0 s:0
Is that normal? Can someone who never rooted confirm that b:1 is the normal state of the phone?
Besides that... is it possible to reset that same counter to 0 without tripping knox?
yes, that is normal every time, you flash the phone the binary counter increases.
No it is not possible to reset counter without tripping knox.