Related
This is a thread specially for the music lovers like me. Many of its have been wandering that how to make viper work on android lollipop, and today I finally found a way out and it will take just a couple of minutes to make viper work on your device.
**Procedure**
1. Install busy box on your device. (If installed skip this step)
2. Download 'SELinux Mode Changer' from playstore and give it root permissions.
3. Now change the SELinux mode to 'Permissive' .
4. Install viper(I used v2.3.3.0) and it's drivers.
Now reboot and enjoy the music.
Please hit thanks if it helped.
will this work on GPE ?
installation was successful , but it doesnt work in brazilian lollipop
the app runs , but enabling viper doesnt make any difference in audio quality
thestory101 said:
will this work on GPE ?
Click to expand...
Click to collapse
Yeah, i'm on gpe 5.0.1 and it working preety good!
l36320 said:
installation was successful , but it doesnt work in brazilian lollipop
the app runs , but enabling viper doesnt make any difference in audio quality
Click to expand...
Click to collapse
I used the aame process when I was in Brazilian soak test version and it worked perfectly not only for me but also for my couple if friends
l36320 said:
installation was successful , but it doesnt work in brazilian lollipop
the app runs , but enabling viper doesnt make any difference in audio quality
Click to expand...
Click to collapse
I had similar issue.
What worked for me was to change the SELinux policy as suggested in this post and then flashing LolliViPER_v2.3.3.0.zip from the below link..
Viper4Android
Do remove the drivers and application before flashing the zip..
l36320 said:
installation was successful , but it doesnt work in brazilian lollipop
the app runs , but enabling viper doesnt make any difference in audio quality
Click to expand...
Click to collapse
its solved , by turning mode to compatible
I followed your tutorial, but still can't install viper drivers. Can you help me? I'm using SuperSU 2.40 flashed from philz touch. And Android 5.0.1 GPE
This works, but it breaks phone volume for me. People can hear me, but I cannot hear them.
l36320 said:
installation was successful , but it doesnt work in brazilian lollipop
the app runs , but enabling viper doesnt make any difference in audio quality
Click to expand...
Click to collapse
Make it a system app
Tap-a-talked from the MOTOG
It working for me (xt1033)
I wonder, on lollipop viper only works with music app....
But on kitkat viper works not only with music player, but also with youtube, video player, even with phone call ringtone and keyboard sound...
Why is that ?
Sorry for my bad english
Maybe some audio related intents have been changed
Tap-a-talked from the MOTOG
Can anyone plz send me direct viper link
Hey can anyone confirm the process of viper working in moto g xt1033 5.0.2.???
PRAKASHPANDEY193 said:
Hey can anyone confirm the process of viper working in moto g xt1033 5.0.2.???
Click to expand...
Click to collapse
yes it's working for my XT1033 5.0.2
but I use tutorial from here http://forum.xda-developers.com/moto-g/themes-apps/material-t3016037
Make sure you had backup your stock 5.0.2 build.prop because after install viper you will lost your signal
so, restore your stock build.prop and reboot
yustindra said:
yes it's working for my XT1033 5.0.2
but I use tutorial from here http://forum.xda-developers.com/moto-g/themes-apps/material-t3016037
Make sure you had backup your stock 5.0.2 build.prop because after install viper you will lost your signal
so, restore your stock build.prop and reboot
Click to expand...
Click to collapse
Thanks buddy...working fine for me...after trying thousand of time and diffrent way, finally u make mah day...???
Have u find any problem after installing this?? And can u suggest some more root apps for lollipop...thanks nd Cheer's??
Hello everyone!
I want present fixes made and tested by me.
Torch fix.zip - Torch fix for CM 12.1 | New version don't need fix for torch.
Fix Calls & Torch 5.1.zip - Fix calls and torch on Android 5.1, confirmed on:
- AICP-9.0 by prangr8 ( Thanks ) | New version don't need any fixes.
- CM 12.1 by Mrcl1450 ( Thanks ) | New version don't need any fixes.
- Resurrection Remix by Furrydaus ( Thanks ) | New version don't need any fixes.
Fix Calls 5.0.2.zip - This fix calls on Android 5.0.2, confirmed on:
- VanirAOSP
Thanks trioset for found calls problem.
To reduce SPAM
This does't fix SIM ! To get SIM working - [GUIDE] RIL on Vanir/FXP CM12
I recomend:
0. "Do you have a SIM PIN set? If YES just continue reading. If NO, please set one BEFORE flashing a CM12 ROM."
1. Flash SuperSU - thanks Chainfire
2. Flash SIM Fix by MK99 ( Thanks )
Ps. Sorry for bad english
What about audio in mrcl 20150330 and vanir latest build.??
If audio is not working does ur fixes solve the audio bug?
jangid said:
What about audio in mrcl 20150330 and vanir latest build.??
If audio is not working does ur fixes solve the audio bug?
Click to expand...
Click to collapse
This fix repair calls without sound loss.
I don't test Vanir but should works. c: U can test and tell us.
But U must remember 5.1 is for 5.1 / 5.0.2 is for 5.0.2.
All i know is elevan player is bug in vanir builds and vanir is 5.0.2?
I don't think that it can fix elevan player, but U can try.
To check Android version just download ROM open zip go to system and open build.prop
Kordius said:
Hello everyone!
I want present fixes made and tested by me.
Fix Calls & Torch 5.1.zip - Fix calls and torch on CM12.1 ( Android 5.1 ) by Mrcl1450 ( Thanks ) | Tested on cm-12.1-20150330 build
Fix Calls 5.0.2.zip - This should fix calls on every 5.0.2. | Can someone confirm it ?
Thanks trioset for found calls problem.
To reduce SPAM
This does't fix SIM ! To get SIM working - [GUIDE] RIL on Vanir/FXP CM12
I recomend:
0. "Do you have a SIM PIN set? If YES just continue reading. If NO, please set one BEFORE flashing a CM12 ROM."
1. Flash SuperSU - thanks Chainfire
2. Flash SIM Fix by MK99 ( Thanks )
Ps. Sorry for bad english
Click to expand...
Click to collapse
From where is the torch fix? Call fix is still from z? Thanks
Torch fix is from Furrydaus RR v5.4.0.
Yes call fix still from Z.
Thank you friend, this works on the latest RR UBL build
Hey Kordius,
I've done the testing in CM12.1 04.02 build
Unfortunately I can't test the call because I can't even get SIM work at the build. Even though, I've applied the solution you refer in the OP.
I think the issue is on the build itself.
Anyway, the torch is fixed. It works normally
I'm gonna test it on the RR 5.4.0 build #3 (latest) tomorrow
artupazira said:
Hey Kordius,
I've done the testing in CM12.1 04.02 build
Unfortunately I can't test the call because I can't even get SIM work at the build. Even though, I've applied the solution you refer in the OP.
I think the issue is on the build itself.
Anyway, the torch is fixed. It works normally
I'm gonna test it on the RR 5.4.0 build #3 (latest) tomorrow
Click to expand...
Click to collapse
0402 can't recognize the Sim, build problem. RR5.4.0 Confirmed working... If u read the post right above you
Sent from my Xperia SP using XDA Free mobile app
For sim to work use the built in SELinux mode changer in Kernel Audietor under Misc. Of course you need to set a sim pin.
klacenas said:
For sim to work use the built in SELinux mode changer in Kernel Audietor under Misc. Of course you need to set a sim pin.
Click to expand...
Click to collapse
0402 build?
@Mrcl1450 RR have inbuilt Kernel Audit + Status Bar tweaks, so I think that it wasn't CM
TheAvengingTITAN said:
0402 can't recognize the Sim, build problem. RR5.4.0 Confirmed working... If u read the post right above you
Sent from my Xperia SP using XDA Free mobile app
Click to expand...
Click to collapse
17042015 build works gud with tangrine kernel no fix needed
Kordius said:
@Mrcl1450 RR have inbuilt Kernel Audit + Status Bar tweaks, so I think that it wasn't CM
Click to expand...
Click to collapse
AICP has it too
Sent from my Xperia SP running AICP LP5.1 with Tangerine kernel
OsGhaly said:
AICP has it too
Sent from my Xperia SP running AICP LP5.1 with Tangerine kernel
Click to expand...
Click to collapse
Do u have any idea how could i fix unresponsive touchscreen on aicp rom. I have this strange issue. Whenever i reboot i get stuck on lockscreen as it doesn't unlock. Screen becomes unresponsive
OsGhaly said:
AICP has it too
Click to expand...
Click to collapse
Yes, but I wrote this when we didn't have AICP.
kpr2897 said:
Do u have any idea how could i fix unresponsive touchscreen on aicp rom. I have this strange issue. Whenever i reboot i get stuck on lockscreen as it doesn't unlock. Screen becomes unresponsive
Click to expand...
Click to collapse
You can try Glove Xperia from Play Store. Maybe works with LP ; p
kpr2897 said:
Do u have any idea how could i fix unresponsive touchscreen on aicp rom. I have this strange issue. Whenever i reboot i get stuck on lockscreen as it doesn't unlock. Screen becomes unresponsive
Click to expand...
Click to collapse
Don't flash GApps posted at AICP OP.. instead of that flash CM 12.1 GApps from here:
http://wiki.cyanogenmod.org/w/Gapps#Downloads
Sent from my Xperia SP running AICP LP5.1 with Tangerine kernel
Does this fix SIM at bagyusz cm12.1?
Enviado desde mi Xperia SP mediante Tapatalk
@federicoroz no
Is there anyone who is using and successfully making calls through the Jio4gvoice/jio join app on the YU Yureka. If yes, please tell me the ROM and kernel you are using.
Yes I used with CM13
ram_Mourya said:
Yes I used with CM13
Click to expand...
Click to collapse
Which one...CM 13 nightly??
antim098 said:
Is there anyone who is using and successfully making calls through the Jio4gvoice/jio join app on the YU Yureka. If yes, please tell me the ROM and kernel you are using.
Click to expand...
Click to collapse
signals work fine with eve cm 12.1
MM as well nouget also work fine
i hav used DU rom , Bean Stalk, HExagon rom and in all jio signal are fine.
for voice calling u hav to download JIO4g voice from playstore and login to your jio account and works
sandyss18 said:
signals work fine with eve cm 12.1
MM as well nouget also work fine
i hav used DU rom , Bean Stalk, HExagon rom and in all jio signal are fine.
for voice calling u hav to download JIO4g voice from playstore and login to your jio account and works
Click to expand...
Click to collapse
Well the problem with me is a little different. I can use Jio data on my phone with each n every ROM that I flash in it but even after logging in and configuring the app I am not able to make the call(no matter which rom i use). I faced this issue in all the 3 ROMs I tried..Hexagon, COS 12.1 and CM 13.0 Snapshot...
antim098 said:
Well the problem with me is a little different. I can use Jio data on my phone with each n every ROM that I flash in it but even after logging in and configuring the app I am not able to make the call(no matter which rom i use). I faced this issue in all the 3 ROMs I tried..Hexagon, COS 12.1 and CM 13.0 Snapshot...
Click to expand...
Click to collapse
well that wierd. coz right now i am using the official cm 12.1 n the app is working absolutly grt.
no echo in the call over LTE.
try to clear cache etc may b it will work
sandyss18 said:
well that wierd. coz right now i am using the official cm 12.1 n the app is working absolutly grt.
no echo in the call over LTE.
try to clear cache etc may b it will work
Click to expand...
Click to collapse
I am too on the same ROM. I flashed the cm-12.1-YOG4PAS3JM-tomato-signed.zip through TWRP..and during the time of flashing did all the clearing of Cache/Dalvik....is your phone rooted?? Which recovery are you using?
sandyss18 said:
well that wierd. coz right now i am using the official cm 12.1 n the app is working absolutly grt.
no echo in the call over LTE.
try to clear cache etc may b it will work
Click to expand...
Click to collapse
Watch this and you will understand my problem
https://youtu.be/-xPXGLEZaWk
I am successfully making calls after 2 to 3 tries. Its working on both my CM 12.1 and 13
Sent from my YU Yureka using XDA Labs
phone reboots while calling on volte call... cant use stock rom as my device is 1Gb (it will lag) so custom rom is the only way to use volte services...
used lineage firmware for all custom roms...didnt try aex, reverted back to cm14.1 (was stable volte earlier) but now reboots..is it my device problem or firmware..?
AKHILR4J said:
phone reboots while calling on volte call... cant use stock rom as my device is 1Gb (it will lag) so custom rom is the only way to use volte services...
used lineage firmware for all custom roms...didnt try aex, reverted back to cm14.1 (was stable volte earlier) but now reboots..is it my device problem or firmware..?
Click to expand...
Click to collapse
firmware problem and due to increased frequency of jio
shyampandey said:
firmware problem and due to increased frequency of jio
Click to expand...
Click to collapse
is there any solution ? latest firmware or should i switch to stock(so hard for me as i've 1gb version)
jio problem . break it
AKHILR4J said:
is there any solution ? latest firmware or should i switch to stock(so hard for me as i've 1gb version)
Click to expand...
Click to collapse
simply switch if you really want to get rid of this
AKHILR4J said:
is there any solution ? latest firmware or should i switch to stock(so hard for me as i've 1gb version)
Click to expand...
Click to collapse
Try to be on full and strong network when you make call......
is there any custom rom that doesnt reboot...? mokee or ? lineage doesnt but heats up a lot
AKHILR4J said:
is there any custom rom that doesnt reboot...? mokee or ? lineage doesnt but heats up a lot
Click to expand...
Click to collapse
rr 18th march build
Cause of jio frequency problem
But you can fix this problem
Flash any custom ROM with VoLTE then go to play store and install NETWORK SIGNAL GURU
open the application> band lock> LTE> Choose BD40: TDD 2300 > Click OK
Then menu>stop forcing
Exit
jithuflynn said:
Cause of jio frequency problem
But you can fix this problem
Flash any custom ROM with VoLTE then go to play store and install NETWORK SIGNAL GURU
open the application> band lock> LTE> Choose BD40: TDD 2300 > Click OK
Then menu>stop forcing
Exit
Click to expand...
Click to collapse
Can't find those options in app , can you send link of that app
superking007 said:
Can't find those options in app , can you send link of that app
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.qtrun.QuickTest
AKHILR4J said:
is there any solution ? latest firmware or should i switch to stock(so hard for me as i've 1gb version)
Click to expand...
Click to collapse
try MultiRom. It offers more RAM.
jithuflynn said:
https://play.google.com/store/apps/details?id=com.qtrun.QuickTest
Click to expand...
Click to collapse
This is the app which I downloaded but there is no band option .
No band option
superking007 said:
This is the app which I downloaded but there is no band option .
Click to expand...
Click to collapse
Bro u need to be rooted in order to access those special permissions......1st root then try that band lock option...
hit thanks if i helped
Can confirm. All VoLTE calls are rebooting the phone.
This may be a fix..
use RR 5.8.3 15 April build... If you get any reboot while calling on volte ..do this
It Requires Root.
Go to ... system/vendor/libs/hw/
rename "power.msm8916.so" to "power.msm8916.so.bak"
I am using it since 2 week, no reboot during volte calls
and even better quality voice calls in low coverage of jio than MIUI stock
I have not tried with other roms.. it may work on other roms too..so try and reply
prxda said:
use RR 5.8.3 15 April build... If you get any reboot while calling on volte ..do this
It Requires Root.
Go to ... system/vendor/libs/hw/
rename "power.msm8916.so" to "power.msm8916.so.bak"
I am using it since 2 week, no reboot during volte calls
and even better quality voice calls in low coverage of jio than MIUI stock
I have not tried with other roms.. it may work on other roms too..so try and reply
Click to expand...
Click to collapse
thanks but what does it actually do ? never reboots ? even in miui signals lose
AKHILR4J said:
thanks but what does it actually do ? never reboots ? even in miui signals lose
Click to expand...
Click to collapse
By renaming that file doesn't affect any thing on as per I know, I have searched about this file a lot in forums, some of kernels delete this file while flashing, So I dont think It cause any harm to system stability.
NO this doesn't mean phone never reboots. It's reboot like same power button method as we want but its solved problem of rebooting the phone during VOLTE calls.
Just like in miui, during calls we lose network in both sim sometimes, in custom roms instead of losing network whole system gets reboot. This prevents those reboots, hence problem solved...
If anyone knows about this particular file and what it actually do please reply.
Did anyone find any solution?
AKHILR4J said:
phone reboots while calling on volte call... cant use stock rom as my device is 1Gb (it will lag) so custom rom is the only way to use volte services...
used lineage firmware for all custom roms...didnt try aex, reverted back to cm14.1 (was stable volte earlier) but now reboots..is it my device problem or firmware..?
Click to expand...
Click to collapse
I'm facing the same problem on my Redmi 2 Prime 2014818 even on stock as well as custom.
This thread is closed due to violation of protocol
I'm using it as a daily driver. Tom is smooth and give me really good baterry backup xD
Steps to install?
I've tried installing with pixel experience (treble), gave me a bootloop.
cichowlasp said:
I'm using it as a daily driver. Tom is smooth and give me really good baterry backup xD
Click to expand...
Click to collapse
Is it has any bugs??? Specifically volte working???
Pavan420 said:
Is it has any bugs??? Specifically volte working???
Click to expand...
Click to collapse
I don't have VoLTE in my country so I can't test it. And the only bug I noticed is that the fingerprint reader not working (button work and swipe right to recently also but fingerprint not)
Sent from my Pixel XL using Tapatalk
cichowlasp said:
I don't have VoLTE in my country so I can't test it. And the only bug I noticed is that the fingerprint reader not working (button work and swipe right to recently also but fingerprint not)
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
In India, I used Jio SIM and it works sometime perfectly and sometime it just show incoming calls but when you picked up call the call gets cancelled, and you cannot used Volte for outgoing calls normal calls can be made and jio4g app from playstore doesnt work because it recognize your phone as volte enabled
vvijayk1999 said:
ANDROID P DEVELOPER PREVIEW
Dear friends,
Since the unofficial Android P Dev preview ROM has been developed I'm posting the links below.
Note:
its a preview build, So high chances of instability.
I'm not responsible for any damage caused.
And its not a daily driver.
Steps to install:
Click to expand...
Click to collapse
Hey , vvijayk1999, correct me if I'm wrong but do we have Mokee ROM for Zuk z2 plus? or these are the general instructions ?
I searched for Mokee ROM for our device but what I found is this and it says, it's based on 6.0 .
Mokee link that I found is here : https://forum.xda-developers.com/lenovo-zuk-z2/how-to/mokee-romofficial-zuk-z2-t3539558
andromuks said:
Hey , vvijayk1999, correct me if I'm wrong but do we have Mokee ROM for Zuk z2 plus? or these are the general instructions ?
I searched for Mokee ROM for our device but what I found is this and it says, it's based on 6.0 .
Mokee link that I found is here : https://forum.xda-developers.com/lenovo-zuk-z2/how-to/mokee-romofficial-zuk-z2-t3539558
Click to expand...
Click to collapse
Bro use rr 6.1.0 treble
Way to early for some one with sigle Z2 Plus as primary phone to try out.
I shall wait till more of a device specific build is made available !!
I get an error error7 when installing incall2.zip. Do everyone alike?
EldarWap said:
I get an error error7 when installing incall2.zip. Do everyone alike?
Click to expand...
Click to collapse
Mount system and vendor
Noverity zip link?
guyz_ahead said:
Noverity zip link?
Click to expand...
Click to collapse
We don't need it for Z2.
OP actually copied the steps which were meant for OnePlus 5 users.
JashanjotSidhu said:
We don't need it for Z2.
OP actually copied the steps which were meant for OnePlus 5 users.
Click to expand...
Click to collapse
Thanks bro. To all of you wanting to enable Double Tap 2 Wake Dt2w, firstly please thank @optimumpro coz of whom I am aware of the mod kernel aduitor https://forum.xda-developers.com/attachment.php?attachmentid=4484977&d=1524581025 Thanks Optimumpro
? Goto to kernel aduitor grant root and head to wake. Then enable dt2w
how to remove this notice?
EldarWap said:
how to remove this notice?
Click to expand...
Click to collapse
Install magisk, download titanium, remove pixel setup.
EldarWap said:
how to remove this notice?
Click to expand...
Click to collapse
Long press on that notification then i option will come then click on it then tap disable...done
I flashed dp4 but it's lagging and freezing. Can anybody tell me the steps for smooth experience?
Tarunshrm864 said:
I flashed dp4 but it's lagging and freezing. Can anybody tell me the steps for smooth experience?
Click to expand...
Click to collapse
you installed via twrp p-lag-fix.zip? I installed it after aex 5.7 and now I have somehow shown that the version of DP3 is installed
guyz_ahead said:
Install magisk, download titanium, remove pixel setup.
Click to expand...
Click to collapse
Can't you just delete it with the TWRP built-in file manager? That's what I would have done.