Database Users

[GUIDE]Remove baseband restrictions

EDIT:
@devilsshadow has done a more useful guide in this thread based on the discussion here so this thread will be closed!
http://forum.xda-developers.com/oneplus-one/general/guide-unlock-aditional-bands-qualcomm-t2877031
Hi all,
seems that some guys where able to remove software based baseband restrictions from SnapDragon modem chips so it is possible that you use your phone in every band that is supported by your hardware. In that post a driver for OnePlus is linked too For worldwide travellers this seems to be quite comfortable.
In the quoted post you'll find the necessary drivers for our OPO and in the first post you'll find the whole procedure.
http://forum.xda-developers.com/showpost.php?p=55395908&postcount=153
BE CAREFUL!
BRICKING OF DEVICE IS POSSIBLE!

So, what bands are available after doing this? Are there any unmentioned bands?

Dusty Rhodes said:
So, what bands are available after doing this? Are there any unmentioned bands?
Click to expand...
Click to collapse
Just take a look at the first post in the thread. Some bands are restricted through software. There is a screenshot before & after unlocking. There are a lot of LTE frequencies which are unlocked etc. It depends on the modem of your phone.

I believe this is only worthwhile for the Chinese OPO to unlock the worldwide LTE bands to be able to use it in the US.

Dzhedaj said:
I believe this is only worthwhile for the Chinese OPO to unlock the worldwide LTE bands to be able to use it in the US.
Click to expand...
Click to collapse
Possible, I can't prove that because I've got the international version. But as far as I know many here in the forum are using the chinese version of the OPO so perhaps it could be useful.

Added to OnePlus index thread
[INDEX] OnePlus One Resources Compilation Roll-Up

timmaaa said:
Added to OnePlus index thread
[INDEX] OnePlus One Resources Compilation Roll-Up
Click to expand...
Click to collapse
Thank you, a good idea!

Glatzi said:
Thank you, a good idea!
Click to expand...
Click to collapse
No, worries. I add all important threads to my index.

Did anybody succeed enabling 800 MHz LTE for Europe?

Thanks for posting this I travel all over the world and this will be very helpful to me. I will try this out after work and see what bands I am able to access.

This doesn't matter for OnePlus One , we don't have restrictions in the baseband. You can use it worldwide without doing this thing.

SergioTeddy said:
This doesn't matter for OnePlus One , we don't have restrictions in the baseband. You can use it worldwide without doing this thing.
Click to expand...
Click to collapse
If you have the Chinese OPO, you do have restrictions (aka those who bought the phone without a invite)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INT: International
CHI: Chinese

how do you get into the relevant diagnostic/debugging mode with the 1+1 .
Download mode is easy, +vol and power with usb connected, or +/- with usb connected but not diagnostic, the process described doesn't work in download mode.

*#*#4636#*#*

That's not diagnostic mode though is it ? That's just the test app.
Sent from my A0001 using Tapatalk

SergioTeddy said:
This doesn't matter for OnePlus One , we don't have restrictions in the baseband. You can use it worldwide without doing this thing.
Click to expand...
Click to collapse
But would this allow to have the extra LTE channels? Some say it doesn't have the antennas for it but not sure and it might be licensing stuff.

fards said:
That's not diagnostic mode though is it ? That's just the test app.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
From what I've read diagnostic mode is ROM dependent. Can anyone with a stock CM11 S try the following from phone:
*#*#8778#*#*
On my crdroid variant this magix sequence does not work. Regarding orgingal thread the phone should just go off screen without any error after typing this numbers.

Glatzi said:
From what I've read diagnostic mode is ROM dependent. Can anyone with a stock CM11 S try the following from phone:
*#*#8778#*#*
On my crdroid variant this magix sequence does not work. Regarding orgingal thread the phone should just go off screen without any error after typing this numbers.
Click to expand...
Click to collapse
Seems to do nothing on my CM11s.

None of the existing short codes work. We have download mode by pressing both vol buttons while the device is powered off and connected. This mode is close but it's not quite the same.
Which is why I asked, I've tried all the other published ones. Someone in the other thread said they'd got the devices showing up in device manager, but not how.
Sent from my A0001 using Tapatalk

fards said:
None of the existing short codes work. We have download mode by pressing both vol buttons while the device is powered off and connected. This mode is close but it's not quite the same.
Which is why I asked, I've tried all the other published ones. Someone in the other thread said they'd got the devices showing up in device manager, but not how.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Yeah, I can't get past the 3rd step either. And step 3.5 is a bit confusing as I don't understand what I'm supposed to use to enable the diagnostics port. Any help would be appreciated.

Xperia Z5 -> Three UK VOLTE

Now that Three UK has officially declared support for 800Mhz VOLTE on the Xperia Z5 I was wondering if anybody tried connecting to 800Mhz frequency.
I have got a EE sourced Z5 and I wonder whether it will connect to 800Mhz if I fash it with Three software.

If you flash it, possibly. There's no harm in flashing to find out and flashing back if you aren't satisfied.

sovanyio said:
If you flash it, possibly. There's no harm in flashing to find out and flashing back if you aren't satisfied.
Click to expand...
Click to collapse
no change..
It keeps connecting to H+ and occasionallt 0 to 1 bar of 4G.

olisun39 said:
no change..
It keeps connecting to H+ and occasionallt 0 to 1 bar of 4G.
Click to expand...
Click to collapse
Sounds like you're just in a bad coverage area, but there might be a certificate required for VoLTE on 3 that isn't on the EE firmware, not sure how its implemented outside of the US

sovanyio said:
Sounds like you're just in a bad coverage area, but there might be a certificate required for VoLTE on 3 that isn't on the EE firmware, not sure how its implemented outside of the US
Click to expand...
Click to collapse
I installed the Three firmware but I haven't done a factory reset as yet.

olisun39 said:
I installed the Three firmware but I haven't done a factory reset as yet.
Click to expand...
Click to collapse
I don't know why you would need a factory data reset. But if you want to go ahead

Your phone should connect to the best band provided by your network by default, I don't think it's going to matter what European firmware you use. If you are on Three I would flash the Three firmware anyway so you can use VOLTE when it comes out.

jeremy_inc said:
Your phone should connect to the best band provided by your network by default, I don't think it's going to matter what European firmware you use. If you are on Three I would flash the Three firmware anyway so you can use VOLTE when it comes out.
Click to expand...
Click to collapse
Looks like the update is arriving in mid December even though the website says otherwise.

olisun39 said:
Looks like the update is arriving in mid December even though the website says otherwise.
Click to expand...
Click to collapse
I did a reset of my phone last night and today I noticed I can connect to the 800Mhz and actually use it.
I don't have VOLTE but it works as a data network
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

You got a link of the three firmware?

Im after flashing this 3 firmware i have flashed a z3 before but that was a tff file and real easy to do. I have downloaded the flashtool and firmware but struggling with this

chrisully said:
Im after flashing this 3 firmware i have flashed a z3 before but that was a tff file and real easy to do. I have downloaded the flashtool and firmware but struggling with this
Click to expand...
Click to collapse
Use the flashtool to automatically download the firmware for you.
It downloads and prepares the files for you to flash your Z5.

olisun39 said:
Use the flashtool to automatically download the firmware for you.
It downloads and prepares the files for you to flash your Z5.
Click to expand...
Click to collapse
I'm on Windows 10 and says drivers and not installed for fastboot grr

chrisully said:
I'm on Windows 10 and says drivers and not installed for fastboot grr
Click to expand...
Click to collapse
Search for Flashtool-drivers-1.5-20140318.exe.
I think it's available in this forum somewhere.

olisun39 said:
Search for Flashtool-drivers-1.5-20140318.exe.
I think it's available in this forum somewhere.
Click to expand...
Click to collapse
just realised needed to disable driver signature on windows 10 duu my bad flashing now. Thanks for the help though

Flashed now and working fine not factory reset. Updates will be from three now?

chrisully said:
Updates will be from three now?
Click to expand...
Click to collapse
That's the gist of it, yeah. You've just flashed your phone with the 3 customisation so that's who updates need to come through.

Cool thanks again ?

chrisully said:
Flashed now and working fine not factory reset. Updates will be from three now?
Click to expand...
Click to collapse
You will have to factory reset your phone because you will get a small system update from Three, which I think enables the 800Mhz network.
Not sure if it supports VOLTE but my phone doesn't show the VOLTE arrows but I have made calls while on 4G.
Or you can try to connect to the 800Mhz 4G network by going to a area where the 1800Mhz 4G signal is weaker.

I have factory reset now but got no update as of yet
---------- Post added at 12:02 PM ---------- Previous post was at 11:51 AM ----------
olisun39 said:
You will have to factory reset your phone because you will get a small system update from Three, which I think enables the 800Mhz network.
Not sure if it supports VOLTE but my phone doesn't show the VOLTE arrows but I have made calls while on 4G.
Or you can try to connect to the 800Mhz 4G network by going to a area where the 1800Mhz 4G signal is weaker.
Click to expand...
Click to collapse
https://onedrive.live.com/redir?resid=43164BBA4C2CE0BE!2704&authkey=!APEROTP7hRm2yjw&v=3&ithint=photo%2cpng

Band 12 after OTA Update!!!

Hopefully read it on the Android Authority Review
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my LG-H901 using XDA-Developers mobile app

Not trying to be mean, but everyone already knows this. It says it right on the Amazon listing.

I didnt know that lol
Sent from my LG-H901 using XDA-Developers mobile app

Sorry, but what's the big deal with band 12?

simoninseattle said:
Sorry, but what's the big deal with band 12?
Click to expand...
Click to collapse
Better T-Mobile LTE coverage in areas that utilize, and it is a pre-req for VoLTE

ariesgodofwar said:
Better T-Mobile LTE coverage in areas that utilize, and it is a pre-req for VoLTE
Click to expand...
Click to collapse
Thank you for contacting BLU Products. We are happy to help you!
We apologize ;however, at this time the R1 HD does not have Volte and no plan is in works to offer that option.
Should you have any additional questions please contact us at 1-877-602-8762 (Monday-Friday 9:30am-5:30pm EST).
Thank you for choosing BLU!

yaconsult said:
Thank you for contacting BLU Products. We are happy to help you!
We apologize ;however, at this time the R1 HD does not have Volte and no plan is in works to offer that option.
Should you have any additional questions please contact us at 1-877-602-8762 (Monday-Friday 9:30am-5:30pm EST).
Thank you for choosing BLU!
Click to expand...
Click to collapse
Which is in direct conflict with BLU's own Press Release: http://www.prnewswire.com/news-rele...smartphone-in-the-market-today-300291993.html
Connectivity: Wi-Fi b/g/n, GPS, Bluetooth v4.0, Hotspot, FM Radio, VoLTE support will be added via Over-the-Air Update (OTA)
Perhaps send a note to Carmen Gonzalez, Sr. Marketing Manager [email protected] and ask?

ariesgodofwar said:
Better T-Mobile LTE coverage in areas that utilize, and it is a pre-req for VoLTE
Click to expand...
Click to collapse
Band 12 is not a prereq for VoLTE. VoLTE works fine on band 4 too. VoLTE is a prereq for band 12 (officially speaking, you can enable it without it) so T-Mobile can comply with 911 regulations.
---------- Post added at 07:33 PM ---------- Previous post was at 07:32 PM ----------
ariesgodofwar said:
Which is in direct conflict with BLU's own Press Release: http://www.prnewswire.com/news-rele...smartphone-in-the-market-today-300291993.html
Connectivity: Wi-Fi b/g/n, GPS, Bluetooth v4.0, Hotspot, FM Radio, VoLTE support will be added via Over-the-Air Update (OTA)
Perhaps send a note to Carmen Gonzalez, Sr. Marketing Manager [email protected] and ask?
Click to expand...
Click to collapse
Uh-oh... That doesn't sound good...
---------- Post added at 07:33 PM ---------- Previous post was at 07:33 PM ----------
ariesgodofwar said:
Which is in direct conflict with BLU's own Press Release: http://www.prnewswire.com/news-rele...smartphone-in-the-market-today-300291993.html
Connectivity: Wi-Fi b/g/n, GPS, Bluetooth v4.0, Hotspot, FM Radio, VoLTE support will be added via Over-the-Air Update (OTA)
Perhaps send a note to Carmen Gonzalez, Sr. Marketing Manager [email protected] and ask?
Click to expand...
Click to collapse
Uh-oh... That doesn't sound good...

I just downloaded "MTK engineering mode start" from playstore and enabled band 12. seems to be working great on my stock oem build
BLU_R0011UU_V12_GENERIC
MTK engineering mode start does not require root. (it might require developer mode, not sure though that is the only thing I have done to the new stock rom I installed. and yes my phone is a amazon variant that I changed to stock variant by installing the stock rom.)

oponewbie said:
I just downloaded "MTK engineering mode start" from playstore and enabled band 12. seems to be working great on my stock oem build
BLU_R0011UU_V12_GENERIC
MTK engineering mode start does not require root. (it might require developer mode, not sure though that is the only thing I have done to the new stock rom I installed. and yes my phone is a amazon variant that I changed to stock variant by installing the stock rom.)
Click to expand...
Click to collapse
VoLTE(voice over LTE) is what people want, but there's a lot more to it than just enabling band 12. It also requires software and certification that Blu hasn't completed yet. So, while you may have band 12, you don't have voLTE. Blu says on their web site that a voLTE update will be available "shortly after launch".
There is a way to activate B12 on BLU R1 HD before the official update comes out. Please note that you will not have access to VoLTE services while you are on B12 with this device until the official support of B12 is enabled. This might affect your ability to receive and make calls and limit your access to E911 services if no GSM/UMTS coverage is available in the area. Only data services will be provided when there is no GSM/UMTS coverage available.​

Can you please tell which bands were also available to be enabled except 12 ?
Thanks

maczpiku said:
Can you please tell which bands were also available to be enabled except 12 ?
Thanks
Click to expand...
Click to collapse
Just band 12, everything else that phone was supposed to have enabled is.
Sent from my BLU R1 HD using XDA Labs

yaconsult said:
There is a way to activate B12 on BLU R1 HD before the official update comes out.
Click to expand...
Click to collapse
How is this done? Is there a walkthrough or anything yet?

fierogt42 said:
How is this done? Is there a walkthrough or anything yet?
Click to expand...
Click to collapse
Just download an app from the play store that starts engineering mode and go to bands
Sent from my BLU R1 HD using XDA Labs

Band 12 after enabling it with the engineering app
Sent from my R1 HD using XDA-Developers mobile app

omariscal1019 said:
Band 12 after enabling it with the engineering appView attachment 3843070
View attachment 3843071
Sent from my R1 HD using XDA-Developers mobile app
Click to expand...
Click to collapse
Does your phone keep the band 12 after a reboot though? I've also gone into engineering mode via Gravity Box (Xposed module) and it enables the band 12 that way but after reboot it does not stay enabled.
I tried searching for a tasker command that could automatically run on bootup to enable band 12 but no luck yet..

ken1645 said:
Does your phone keep the band 12 after a reboot though? I've also gone into engineering mode via Gravity Box (Xposed module) and it enables the band 12 that way but after reboot it does not stay enabled.
I tried searching for a tasker command that could automatically run on bootup to enable band 12 but no luck yet..
Click to expand...
Click to collapse
yes it does i just have enable it daily lol... but couldnt a way to keep it enable after reboot...
Sent from my R1 HD using XDA-Developers mobile app

If we got band12 with the OTA why isn't it enabled? Sorry, new to this. I'm not rooted because I made the mistake up updating when I got this phone in the mail yesterday.

JynxRD said:
If we got band12 with the OTA why isn't it enabled? Sorry, new to this. I'm not rooted because I made the mistake up updating when I got this phone in the mail yesterday.
Click to expand...
Click to collapse
We did NOT get a band 12 update with the OTA. That's why everyone was cautioned not to take the OTA because it locks up the phone and disables use of SP Flash Tools. So at this time, there is no way to root or flash a phone that took the 6.6 update.

There is apparently an update
Apparently it is happening. Though, my phone says, up to date, when I check (so, may be not for everyone). (I am new, so it does not let me post a link, but, just google "r1 hd volte" and look in news)

Volte / Volwifi notwork thailand!

I come from thailand and use carrier "AIS" and my mobile number can use volte/volwifi (before come to use op5 i use samsung s8 volte and volwifi it worked.
My phone op5 / oos 4.5.5 / rooted
My setting show volte/volwifi i enabled. but my statusbar has not show icon volte and i test call. Icon 4g+ has change to h+
Please guide me to do. I need to use it so much!
Thank you very much!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ONEPLUS A5000 using Tapatalk

thailand use lte brand 1/3/8 i think oos not set lte use brand 1/3/8 right? i can fix by self ? please guide me!!
Sent from my ONEPLUS A5000 using Tapatalk

My carrier avaliable brand 1/3/8. Why oos can use 3/8. I can enable?
Sent from my ONEPLUS A5000 using Tapatalk

Like for a lot of people here the Oneplus 5 doesn't have the profiles for our ISP
For now the only ISP that have the VoLTE profiles included in OOS 4.5.6 are :
China: CMCC
UK: EE
US: TMO
India: RJIO
We need to wait for the next updates in order to have full VoLTE support in another countries

Pouic said:
Like for a lot of people here the Oneplus 5 doesn't have the profiles for our ISP
For now the only ISP that have the VoLTE profiles included in OOS 4.5.6 are :
China: CMCC
UK: EE
US: TMO
India: RJIO
We need to wait for the next updates in order to have full VoLTE support in another countries
Click to expand...
Click to collapse
How i can check my isp profile?
Sent from my ONEPLUS A5000 using Tapatalk

This is data from s8 work volte in thailand!
Sent from my ONEPLUS A5000 using Tapatalk

This is data from op5! Enable volte but not work!
Sent from my ONEPLUS A5000 using Tapatalk

TONGEXHISPEED said:
How i can check my isp profile?
Sent from my ONEPLUS A5000 using Tapatalk
Click to expand...
Click to collapse
Profiles are stored in the following folder (you need to be root to access it) :
/system/rfs/apq/gnss/readonly/firmware/image/modem_pr/mcfg/configs/mcfg_sw/generic
In my 4.5.6 update I have the following isp supported
Reliance
Cmcc
Ct
Cu
Ee
H3g
Telefoni
At&t
Tmo
Ytl

Pouic said:
Profiles are stored in the following folder (you need to be root to access it) :
/system/rfs/apq/gnss/readonly/firmware/image/modem_pr/mcfg/configs/mcfg_sw/generic
In my 4.5.6 update I have the following isp supported
Reliance
Cmcc
Ct
Cu
Ee
H3g
Telefoni
At&t
Tmo
Ytl
Click to expand...
Click to collapse
I have samsung s6 it work volte on my carrier. I can root and check from this part.and i copy from s6 to op5 it will work?. S6 exynos version.
Sent from my ONEPLUS A5000 using Tapatalk

Exynos and Qualcomm chipsets don't have the same LTE modem, so it won't work probably. But thanks anyway

Pouic said:
Exynos and Qualcomm chipsets don't have the same LTE modem, so it won't work probably. But thanks anyway
Click to expand...
Click to collapse
sony xz premium use snap 835. it will use same modem like op5 ?

There is a GitHub site for extracting these let me see if I can dig it out.
---------- Post added at 02:32 PM ---------- Previous post was at 02:16 PM ----------
https://forum.xda-developers.com/oneplus-3/how-to/how-to-getting-vowifi-volte-poland-t3595940
Big risk with doing this (cannot find the GitHub link but this should be sufficient)

daleski75 said:
There is a GitHub site for extracting these let me see if I can dig it out.
---------- Post added at 02:32 PM ---------- Previous post was at 02:16 PM ----------
https://forum.xda-developers.com/oneplus-3/how-to/how-to-getting-vowifi-volte-poland-t3595940
Big risk with doing this (cannot find the GitHub link but this should be sufficient)
Click to expand...
Click to collapse
It xz to op3.
I need xzp to op5.
But am can not do. Because am newbie!
Sent from my ONEPLUS A5000 using Tapatalk

TONGEXHISPEED said:
It xz to op3.
I need xzp to op5.
But am can not do. Because am newbie!
Click to expand...
Click to collapse
Yes it's definitely not for newbies

Interband LTE CA

I'm not sure whether someone has done this before me, but I have successfully enabled B3+B7 CA on my ZUK Z2 through modifying RF LTE values in QXDM. For those who live in area outside China and have 4G+ interband coverage (of course your phone has to first support the bands for CA in your area), this is good news for you. If someone else needs it, I can release a guide here.
EDIT: Guide released in 3rd post.

hereitbegins said:
I'm not sure whether someone has done this before me, but I have successfully enabled B3+B7 CA on my ZUK Z2 through modifying RF LTE values in QXDM. For those who live in area outside China and have 4G+ interband coverage (of course your phone has to first support the bands for CA in your area), this is good news for you. If someone else needs it, I can release a guide here.
Click to expand...
Click to collapse
Please release guide.
Sent from my Z2 Plus using Tapatalk

Guide
First, make sure your phone is rooted and you have QPST and QXDM installed with all the necessary drivers. Enter your phone into diag mode through adb shell. If you don't know how to do this, a simple Google search will always help you.
Next, make sure your phone is detected in QPST & QXDM (refer to Google too if you don't know how to do it).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Afterwards, go to NV Browser in QXDM and select RF LTE from the category filter. Scroll down until you find a description with the content RFNV LTE B3 CA BC CONFIG.
Finally, after clicking on it, click read down in the bottom. Click multiple times on the Input Column in Fields and enter the value 524484. Click write and reboot your phone. You can also change the value of RFNV LTE B7 CA BC CONFIG if you wish to get B7+B3, B7+B7 & B7+B8 CA, still depends on support from your carrier though.

Interesting! Will try the procedure this weekend.
Thanks!

Can you give a list of all the bands which can be combined for CA using this?

blueman24 said:
Can you give a list of all the bands which can be combined for CA using this?
Click to expand...
Click to collapse
Theoretically all bands which ZUK Z2 support can be combined provided your carrier supports it.

So, even TDD and FDD bands can be combined? For example FDD Band 3 + TDD Band 40.

blueman24 said:
So, even TDD and FDD bands can be combined? For example FDD Band 3 + TDD Band 40.
Click to expand...
Click to collapse
Technically speaking yes, in QXDM there are indeed values to combine B1+B41/B39 initially entered, so you will have to figure out the number you want using a decimal to binary converter instead of the current one I gave. I did modify the values for FDD+TDD for my own setup but I can't test it since carriers in my country has yet to launch it.

thanks for the reply.
Do you know why the phone does not support carrier aggregation out of the box? the x12 lte modem supports 3x20mhz CA so why do we need to do this tweaking for it to work? I tried on a nexus 5x and CA was working without any additional tweaking. I guess it is something that the OEM decides to enable/disable?

blueman24 said:
thanks for the reply.
Do you know why the phone does not support carrier aggregation out of the box? the x12 lte modem supports 3x20mhz CA so why do we need to do this tweaking for it to work? I tried on a nexus 5x and CA was working without any additional tweaking. I guess it is something that the OEM decides to enable/disable?
Click to expand...
Click to collapse
Yes exactly. ZUK only enabled CA for bands used in China because this phone was aimed for the China market anyway, so for CA on other bands we have to unlock it ourselves.

Its possible to revert to orginal settings?

lolnwl said:
Its possible to revert to orginal settings?
Click to expand...
Click to collapse
Yes. Just change it back to original values, or restore your backed up QCN file before making this change.

Is it possible to enable B20 (800MHz)?
If someone can try it, please tell me!

ale467 said:
Is it possible to enable B20 (800MHz)?
If someone can try it, please tell me!
Click to expand...
Click to collapse
No. Nothing is mentioned about B20 in this thread. This thread isn't meant to enabled unsupported LTE bands.

hey man, could you share your phone's qcn file? I only need lte related nvids, you can use qrct to export them.

[little off topic]
Would someone kindly share you QCN (the stock one)?
My Zuk Z2 got the signal loss error months ago and I revert it, but now it came back and I try all the things (there is a topic about this error) and nothing I do working.
I will use my own backuped IMEI, MEID and MAC, but I need to try a non modified QCN first.
Thanks!

My QPST Configuration State Only Showing Green Bar Progress. Not Enable like yours. Any advise please
Ok, Manage to make it Enable.
Device Manager Show Qualcomm HS-USB Diagnostics 9025 (COM XX)
How to...
adb shell
su
setprop sys.usb.config diag,rmnet,adb
Am i Correct?
But...
On QXDM --> NV Browser --> No RF LTE
Try to scroll by sorting via description to find RFNV also can't find...
Please advise...

teatea said:
My QPST Configuration State Only Showing Green Bar Progress. Not Enable like yours. Any advise please
Ok, Manage to make it Enable.
Device Manager Show Qualcomm HS-USB Diagnostics 9025 (COM XX)
How to...
adb shell
su
setprop sys.usb.config diag,rmnet,adb
Am i Correct?
But...
On QXDM --> NV Browser --> No RF LTE
Try to scroll by sorting via description to find RFNV also can't find...
Please advise...
Click to expand...
Click to collapse
Please provide screenshots

hereitbegins said:
Please provide screenshots
Click to expand...
Click to collapse
PFA for Screenshot as attachment.
Hope you can help what went wrong. Is it because of the QXDM version? I try to find the latest version, but i don't have the license.
Last, the NV ID that show on my QXDM up to 65673 only.
Update: Change QXDM Version, manage to make it 4G+
Thanks. A day and two, i realized battery drain a bit faster then normally does. It is normal, as Modem work on both B3 and B7.

kirtikhurana said:
@hereitbegins
All 3-4 screenshots are same in your guide... & how did you calculate B3+B7 value?
how to find the values of B5+B3 , B5+40 & B3+40 ?
Click to expand...
Click to collapse
You just need to calculate the ones you like to CA for that band, there's an app on play store for that. For example for B5, calculate B3 and B40 support together. The values are same because I set the same supported bands for them.