hello
i appreciate all your hard work you do .
i do have this problem at hand if you could help:
phone :GT-I9500
was on android 5.0
the phone would boot tonormal and give me the (apps updating -android is upgrading )messeges then i get the samsung logo again and it loops like this
tried flashing android 5.0 with 4 files but it always gave the sboot.bin flash failed error
then after a couple tries with different versions of odin i'm getting the repartition operation failed problem when using odin 3.10
and stuck at pit mapping when on odin 3.07
couldn't flash recovery too and won't boot to stock recovery> only download mod is accessable
can you please give me any ideas you got on a solution
Try a different usb port / different usb cable.
hey guys im sorry if i post this on the wrong section but i followed this tutorial: droidviews(dot)com/root-galaxy-s6-and-s6-edge-on-android-6-0-1-marshmallow-update/ to root my s6 edge+ and it went black... after some research i found out the tutorial wasnt for my device(SM-G2928F) so i flashed it with cf-autoroot and then it boot looped for like an hour. I downloaded the original greek firmware from sammobile but it brings me up this error: SECURE CHECK FAIL : (BOOTLOADER).. any help?
UPDATE: changed the port and run Odin as admin now it says: SECURE CHECK FAIL : (RADIO) Odin log: pastebin(dot)com/4w1943HF
UPDATE: now when I exit recovery mode it doesnt start and tells me: An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.(I can still go into recovery mode)
Let me check you have flashed a firmware not for your device with odin or just a zip? First I would try flashing the most recent firmware you can find for your device with odin, some bootloaders can't be downgraded. If that doesn't work then the emergency firmware recovery will work, I've used kies emergency firmware a few times.
Hopefully someone with your device will point you in the right direction if you are stuck
I flashed a firmware not for my device but I found a solution on another XDA post thank you
somebody can tell me step by step what to do? I'm stuck in a bootloop and i tried to install the stock firmware with odin but it keeps failing Odin says that after i started it, everything is ok and i get a "pass" in Odin but it just keeps rebooting i only can get into download mode, not into recovery mode And when the phone starts to boot, i just get this black screen with the samsung galaxy S5 on it and in the top corner in blue letters "recovery booting ..." and then it goes black and restart ...
Can anybody help me i'm kinda desperate
Hi, try with pit file check your pm´s
israelicky said:
Hi, try with pit file check your pm´s
Click to expand...
Click to collapse
Whatdo i do with the file? Flash it with odin and then? Do i flash a new rom after it?
i tried to flash it again and used that PIT file but still the same result any other suggestions? Or is my phone ready for the recycle bin? :crying:
Flash it whit the rom
Does it say G900F in download mode?
Odin mode
Product Name : SM-G900F
Current binary : Samsung official
System status : Custom
Reactivation lock (KK) : Off
Knox waranty void : 0x1 (2)
Qualcomm secureboot : Enable (CSB)
Ap survey : S1, T1, A1, A1, P1
Secure download : Enable
UDC start
Thats what it says ...
Sounds like something in DATA is corrupted, which ODIN does not wipe
So flashing ROMs with ODIN won't fix it, you need to wipe the phone
Almost the same thing was happening with another member the other day, using ODIN option "Nand erase all" while flashing the ROM to wipe the phone, and then using KIES3 to recover the firmware was their fix
After Nand erase all, the phone would only enter download mode, KIES3 fixed that with the firmware recovery process
http://www.samsung.com/uk/support/usefulsoftware/KIES/
--
Or you could try flashing TWRP with ODIN, and see if you can get into TWRP recovery first, factory reset from there
I tried to put TWRP on my S5 with odin but that didn't work ...
Now i just flashed the phone with a new rom and with "Nand erase all" ticked and then do a firmware upgrade with "Kies" but unfortunately that didn't worked either :crying:
any other suggestions?
In ODIN, uncheck "Auto reboot"
Flash TWRP
When it completes disconnect USB and remove battery to power off
Replace battery and immediately boot into recovery
Volume Up & Home & Power
ANd you need to add more details other than "It didn't work" or we can't help
Ok i did what you suggested and at first it starts up with this on the screen :
Recovery booting .... (in blue letters)
Set warranty bit: recovery (in yellow letters)
then it just reboots without this text on it but it just keeps rebooting ... i dont get to see any thing else but the samsung galaxy s5 powered by android screen ...
And what does KIES firmware recovery say?
With the kies program i get thesame result ... it just stucks in the bootloop ...
No, what does KIES say when you run the firmware recovery?
I'm going to leave you to it, can't help you when you just keep repeating the same thing "Doesn't work"
Im not home at the moment,i will give it another go when im at home and tell you what it sayw
Ok, i opened Kies and searched for that emergency recovery firmware that you talked about but i don't see a option to select my phone??
Here is a printscreen from kies and my phone connected i download mode ...
http://i1360.photobucket.com/albums/r643/Tom_Mutsaerts/Naamloos2_zpskzwqrxly.jpg
Ok, you may close this topic, i brought the s5 to a repairshop and they are gonna check what the could do ... possible even necessary to replace the touchscreen and lcd according to the salesmen :s
Hello people, I'm just going to get straight into it... FRP blocked my custom binary on my Samsung Galaxy On5. I am new to FRP and I wasn't being careful when restoring a backup via TWRP. Now I can only boot into download mode and OEM Unlock is disabled from what i can tell. I've tried Odin i can kinda flash the AP file it doesn't work obviously but it does mark my system as official for some reason so FRP isn't triggered but then it tells me to use smart switch to restore it via emergency restore. I can also flash the CSC and CC back to get to square one. I've tried Smart Switch but i don't know my serial number to do the initialization i have an idea of what it might be since i do have a TWRP backup of my phone on my PC so shouldn't my serial be there? Any idea to fix my phone or is it fully bricked?
I tried to root my phone today but after reboot, it got stuck in the boot screen which says "Samsung Galaxy 8+". I can only go to the download mode. I tried downloading the stock firmware and tried to flash it using Odin but the flash always fails to give a Fail! (DeviceInfo) error.
I don't know what to do. I am afraid the phone is not charging as well, it the battery dries out my phone will be dead. What should I do?
Did you try and root the new AQG5 base? Flashing TWRP or CF Auto root will fail if you do so. If this is the case then follow the guide @Nameless provided https://forum.xda-developers.com/galaxy-s8/help/stuck-bootloop-flashing-aqg5-fix-t3636857 and throw him a thanks.
If you didn't do that and Odin still continues to fail when flashing stock you should give Smart Switch a try and go for an emergency recovery. You will need your device model number and S/N code ready. http://www.samsung.com/dk/smart-switch/
i have the equal problem my s8 stay in boot screen and in odin fail stock firmware! plz help me TT i can go the download mode but cant flash stock rom with odin