I am sure that I would not even know this except I have the Edge Panel "My Places" which I really like because I can set up a profile for work and have my phone go to vibrate when I pull in the parking lot and can get to the apps easily that I use most.
Well every now and then I have noticed that the profile has switched off of work and to home while I am at work, sitting at my desk and not moving. This has become more frequent in the last week. So when I hear the profile change I have looked at Google Maps and sure enough my GPS lock is showing that I am home. After about 30 seconds this all of the sudden updates back to my work location and the My Places profile updates right away.
I am sure if I did not have the My Places profiles set-up I would never know, but has anyone else ran in to this issue, and if so is there a way to fix this? Thanks
Similar issue here, except mine shows I'm home or wherever my last location was when I had my gps on when I'm trying to check for a route to somewhere, only fix that seems to work is closing and reopening google maps, thought it was a google maps issue, guess not.
Related
Hi Guys,
This has sorta been covered in the Google Mobile forum but I have yet to see anyone that has tested the Google Latitude in their HTC HD2.
The thing is, Latitude works but with 2 serious practical flaws:
1. Phone must be on, no standby so only can do minimum backlight.
2. Latitude does not work when Mobile Google Maps is minimised, ie. if you lock the device and although the phone is on, Latitude won't update.
What the Latitude suppose to do:
1. Still update location even if Google Maps minimised (phone must be on)
2. Still update location even if Google Maps has exited, but you check the "Yes" option for background updating (phone must be on)
So in real terms, you can't even put the phone in your pocket as the screen is not locked and it could start dialling someone in your contact list, let alone change settings for other programs.
It would be nice if Latidude can do its 2 main features above properly with the phone turned off, ie. you can still receive a call when the phone is off, weather still updates when the phone is off.
Anyone with similar issues I would appreciate any comments you may have.
Hi, I have this problem, too.
Mine does update the position when GM are closed nad 'yes' is choosen. Every 20 minutes, as it is supposed to do. It also uses only fast BTS fix, not GPS.
GM use notification (low-level alarm) to wake the phone up after 20 minutes and update the position. You can you for example FDC task manager to check if the notification exists after closing GM. It has page with notifications. You should see something with 'google' there, with time set 20 minutes after the GM exit.
http://www.dotfred.net/TaskMgr.htm
I'm not sure how it works with GM only minimized. Will report later.
It seems to update the location once per 20 minutes also when minimized (and not asleep (in charger).
Works every 20 minutes with application minimized and device asleep.
Btw. my version is 3.3.1
Latitude updates work or not.
Maybe my experiences helps.
I've been using the HD2 for a few weeks now. During initial startup several questions are asked. One of them seems to be if you want to allow location updates to be send from your phone.
Out of the box I had some time and answered all these questions. Next few weeks my friends tell me my Latitude position was being updated. I never started Google Maps though. Not once.
After a few weeks I had to upgrade the ROM (SMS bug). This time I did not take the time to answer all the questions (next next skip skip). In my opinion I would be able to set these settings in several menu's later on. As from this point on Latitude behaves like reported on this thread. Only updates when Maps is active.
Sorry to wake this topic but it seems still unresolved and I have some input.
Given that you have accepted the terms and conditions, especially location updates to be sent from your phone, Google Maps should update your position every 20 minutes, regardless whether it is running or not.
Once we have program settings out of the way as a reason, I think the problem is not related to Google Maps at all, but is actually an internet connection issue. In other words, I think GM is correctly updating your position every 20 minutes, it just cannot send it over the Internet for other people (and yourself) to use it.
Why do I think so? Because I have exactly the same problem as you guys describe, but only while at home. As strange as it sounds, the moment I go to my office, my position is perfectly updated every 20 minutes (I can see it on my Google account), but when I leave the office, my location stops updating. Mind it I never change any settings when I enter my office so this cannot be related to any activity I did. The only way I can explain this is that when I leave the office, my phone fails to connect and transmit my position, while it succeeds while I'm in the office.
As a next step I am trying to troubleshoot internet connections. I think the phone is using wifi to transmit location information. If it was using the GSM network, it wouldn't behave differently when I am on different places (the mobile operator is always the same and the Internet settings are always the same).
So this is sort of a multipurpose post, just saying some of the issue I have had with my Vibrant, and some of the possible solutions or at least information that I believe will help toward finding a solution.
About the GPS, this is what I have noticed:
I am pretty sure this is a software issue and this is why- I've noticed that I only have a problem when I am using the actual GPS and the network based location. I started to notice this first in Foursquare. Even when I could get a lock in Maps (albeit with a blue circle indicating it wasn't terribly accurate) Foursquare would always show where I last checked in... then I realized it wasn't showing where I last checked in, it was showing where I last was located using the GPS. I found that if I turned off the "Use GPS satellites" option, and only used the network location option, Foursquare (and indeed any other GPS program) got my location near instantly. Similarly, when I had only the satellite option checked (and not the network location) as long as I was outside I got a pretty quick and steady lock. When I put both options back on... everything all crappy again. So I've been keeping the actual GPS off unless I'm using navigation, in which case I switch, and I haven't had an issue yet. So I think this is something that they can fix in an update. Any other thoughts would be appreciated.
In regard to Social Network Sync:
It was driving me nuts that half the time I looked in the settings menu it would show that Facebook, Myspace, and Twitter (the Samsung variants) had "errors." Then I realized that for whatever stupid reason, they seem to only run into these errors on wifi. If I turned wifi off and synced... it worked. Turned it back on... didn't work. I tried this a few times. However, that said, the Social Network Sync is kind of broken. For example, even if you have it set to download all of your Facebook friends, after the first time it won't. To add them, you have to go into "Link contact, Get Friends, Facebook" and then check who you want to add .This is kind of annoying, and hopefully will also be fixed with a software update. Again, any thoughts would be appreciated.
About Flash:
This is honestly my biggest issue with the device. If you look in the applications it does have Flash lite. It just doesn't work. Coming from an almost flawless Flash experience on the MyTouch Slide to this is really not fun. The reason this annoys me so much though is because in apps that utilize the browser (for example NewsRob) whenever they load a page that has flash on it, you are kicked into the browser and get an error message (webkit error, file not found or some such.) When I'm browsing through articles in NewsRob it's incredibly annoying to have this stupid error message (which opens the browser, then an error, so it takes three back presses to get back to the article, all of which have a little delay.) Again, this is something that 2.2 should fix, but it's still frustrating. If anyone knows of any possible solution to this it'd be greatly appreciated.
Screen burn in I discovered today.
Much to my dismay, I noticed today that the clock digits were burnt into the screen, much like how the notifications were burnt into the screen on my Nexus One. The difference is that this took awhile to happen on my N1. Not three weeks like I've had the Vibrant. I don't know if this is permanent or just temporary, I have a pure white background open full screen right now, and will run like a color flashing thing next, hopefully this will get rid of it. If not... that's just excessively disappointing. I love love love having what is literally the most advanced screen technology in existence, and having a literally perfect black level, but screen burn in on a few week old device (that has been set at low or auto brightness since day one) is just not acceptable. I will post again after a day or so of white screen/colors and let ya'll know the results. But it's frustrating. Has any one else noticed this yet? Or have any other possible solutions?
Lastly, lag.
I've noticed that the ONLY lag on the device comes from stupid TouchWiz and the Buddies and Feeds widgets. With them disabled the device FLIES. With them on, it's slow and occasionally has to be force closed. For now I have the widgets in question disabled, but this is vastly annoying, and really makes me wish I had my MyTouch Slide back (except with this screen and processor lol.)
So, in conclusion, I generally love this device. But the second T-Mobile announces The MT3GHD, it'll be on eBay faster than you can say Android 2.2 with Espresso lol.
Quick update, jscreenfix app from market fixes the burn in, I let it run for about an hour. I'm going to do that every week just to be safe.
Sent from my SGH-T959 using XDA App
Would you like some cheese with your wine?
Sent from my SGH-T959 using XDA App
c0wb0ycliche said:
About the GPS, this is what I have noticed:
I am pretty sure this is a software issue and this is why- I've noticed that I only have a problem when I am using the actual GPS and the network based location. I started to notice this first in Foursquare. Even when I could get a lock in Maps (albeit with a blue circle indicating it wasn't terribly accurate) Foursquare would always show where I last checked in... then I realized it wasn't showing where I last checked in, it was showing where I last was located using the GPS. I found that if I turned off the "Use GPS satellites" option, and only used the network location option, Foursquare (and indeed any other GPS program) got my location near instantly. Similarly, when I had only the satellite option checked (and not the network location) as long as I was outside I got a pretty quick and steady lock. When I put both options back on... everything all crappy again. So I've been keeping the actual GPS off unless I'm using navigation, in which case I switch, and I haven't had an issue yet. So I think this is something that they can fix in an update. Any other thoughts would be appreciated.
Click to expand...
Click to collapse
Even though I personally believe the gps is a firmware/driver issue, your explanation above does nothing to narrow it to that... You say the GPS doesnt work right when it is turned on...
well... yeah.
blink55184 said:
Even though I personally believe the gps is a firmware/driver issue, your explanation above does nothing to narrow it to that... You say the GPS doesnt work right when it is turned on...
well... yeah.
Click to expand...
Click to collapse
In Location settings, there are two options, Use wireless network and Use GPS satellites. What I am saying is that if BOTH of these options are turned on, it doesn't seem to work properly. If I only use wireless networks, it works (even indoors) but isn't terribly accurate. If I use GPS only, and I am outside, it works, accurately. So I am just saying there seems to be some disconnect between the wireless network location and GPS location working in sync like they normally do.
And (@lemarg) I don't see how my post is whining, I'm just pointing out some observations about the issues I (and other people) been having with the phone. Maybe I misunderstand the point of a forum.
Hi,
I have some problems with finding my location, and I think it started since the 4.3 update, but I'm not sure.
I see it mostly with Tasker. I have some profiles for different locations (like home and college..) triggered by "net" without GPS, that is ment to turn Wifi on and off.
I noticed today when I left college, I opened the screen on the way home and I saw for a brief moment that the WiFi is still ON and my "college" profile was still activated, and immediately after that, the profile went off and also the WiFi. The Net location only triggered when I opened the screen, and it seems it thought my location was still in college until I did so.
When I got home, I opened the screen to see if it activated my "home" profile and turned on the WiFi, and nope, nada, even when opened the screen it still didn't know my location, only after I turned on the WiFi manually it knew where I am and activated the "home" profile (which in that case was already pointless)..
My guess is that on the way back from college it found my location when I opened the screen cause the WiFi was still on, and when I came back home the WiFi was off so it didn't find my location without it.
But if that's the case, then there is simply no point in those "wifi on / off" profiles if it can only find my location with WiFi.
I posted a similar thread on Tasker support group, but honestly I think it's a problem with the google's new location services.
What's that point? now we can get a good location fix only with WiFi or GPS?
and also why I must turn on the screen to "refresh" the location? isn't "net location" works on the 3g network? which is always on, so what's the problem.
By the way these network delays doesn't only happen with location, it happens alot with messaging apps, that sometimes I get the messages only when I turn on the screen. Is there a fix for that?
Sorry for throwing out so many questions without order
Thanks in advanced
same issue
Yah, I'm experiancing the same issues.
Hi everyone,
I'm not sure if this is a common problem or not but thought I'd make a thread as I've searched the net with mixed results but not specific to the Note 3.
The stock weather widget which comes with TouchWiz seems to be acting strange for me. I live in the UK and I have it set to update every 6 hours, but every day without doubt for a while the time will be completely different and also the location.
The location comes up as some place called "Bekasi" and the time changes to wherever that is. Sometimes when clicking on refresh nothing will happen and then other times it will change back to UK time and my area.
I've looked under settings and locations services and everything in that menu is enabled (Access to my location, Use GPS Satellites, Use wireless networks).
I even tried adding my home area under "My Places" but that doesn't seem to help.
I can't quite put my finger on why this is happening, have any of you had this problem or something similar?
It seems like trusted locations don't work for some people. I have found a workaround, and it works in two different locations that I tried.
Add a new trusted location, but instead of picking a suggested by maps address, move the location pointer on maps to somewhere very near your location that gives gps coordinates instead of an address. A new trusted location with gps coordinates should work now.
nabbed said:
It seems like trusted locations don't work for some people. I have found a workaround, and it works in two different locations that I tried.
Add a new trusted location, but instead of picking a suggested by maps address, move the location pointer on maps to somewhere very near your location that gives gps coordinates instead of an address. A new trusted location with gps coordinates should work now.
Click to expand...
Click to collapse
This did not work for me. It was weird, my first trusted location worked great but my second one was actually my home location and I have tried dropping the pin everywhere around my house and it refuses to work. I am fixing to try it at work to see if that will work.
Yes I noticed this bug as well. I added "Home" which took from maps, but once I just added a new location (I didn't have to move the pin anywhere) while at home, it started working just fine.
Codiusprime said:
This did not work for me. It was weird, my first trusted location worked great but my second one was actually my home location and I have tried dropping the pin everywhere around my house and it refuses to work. I am fixing to try it at work to see if that will work.
Click to expand...
Click to collapse
Try a pick a different location right next to where the map says you are. The instructions for Smart Lock says that it has to be within 80 feet of your actual location.
wsoldier said:
Yes I noticed this bug as well. I added "Home" which took from maps, but once I just added a new location (I didn't have to move the pin anywhere) while at home, it started working just fine.
Click to expand...
Click to collapse
Make sure that it sticks after a reboot. I had some problems with that when using addresses instead of gps coords.
Pretty lame, Milhouse. All the delay in getting Lollipop out and a major feature like this doesn't work?
When I turned on Smart Lock it already showed my house as a trusted location. When I tried to add a second pin at home it showed the map of my house with a circle around the whole properly and said "this place is already trusted". So it obviously knows that I am home. Location is in high accuracy mode as it suggested. Yet when I power off the screen and back on it still wants my fingerprint each time.
nabbed said:
Try a pick a different location right next to where the map says you are. The instructions for Smart Lock says that it has to be within 80 feet of your actual location.
Click to expand...
Click to collapse
Tried that multiple times. It's weird, it works at every location I've set except home or around my home.
So now I have it working... here is what I did:
1) Turn off the default "Home" value it had for me
2) Add a new pin here at my house, showed the GPS coords on the map, etc
3) Waited a little bit and it started to work
The waiting part was key, as it did not start working immediately after setting it up. I thought perhaps this was the original problem so I removed my new pin and re-enabled the original home and then once again waited. This time it never started working. So I reverted all the steps and waited a bit more and it's working now with my new pin and the original home disabled.
Once I added a second location and let G Maps find me (which happens to be the exact spot I typed in under Home) it's now working. Go figure. Not sure if I should go back and delete the other location or not. If it isn't affecting battery, I see no point.
I've added a second location near home from Google Maps and, for the time being at least, it's working.
Now that it's working, I went ahead and removed the second location that I created and it still works fine back on the original address I used to set it up. Odd.
And now today I wake up and it's not working. Location still enabled, even tried rebooting the phone. Just doesn't work. Quite frustrating.
Funny thing is on my wifes note4 it was the exact opposite to get it working. It first selected gps coordinates and that didnt work so i had it suggest an actual address and it worked.
bbeelzebub said:
Now that it's working, I went ahead and removed the second location that I created and it still works fine back on the original address I used to set it up. Odd.
Click to expand...
Click to collapse
I did that also. And it didn't work. But then it started working! Tomorrow is another day. ?
the best work work around for me was to add the houses to the left and right of my house.. once i did that and had 3 locations including mine it worked perfect
sfld said:
the best work work around for me was to add the houses to the left and right of my house.. once i did that and had 3 locations including mine it worked perfect
Click to expand...
Click to collapse
Sound like you had to cover a much larger area than an 80-foot radius.
Perhaps the Google bug is in that it cannot get a good location lock on our current location.