Database Users

Samsung Galaxy Note 4 SM-N9109W (China) Bootloop - No Access to Recovery

Hello everyone, I'd like to start off by saying I am a complete newcomer to all this so please explain literally all of the terminology/jargon you intend to use and correct me when I use it wrong.
I have a Chinese version of the Samsung Galaxy Note 4 SM-N9109W and up until yesterday it was running out of the box on android 4.4.4. I care not for any of the data on the phone nor the warranty as there was none to begin with when it was gifted to me.
I attempted to "root" it as I didn't want any of the Chinese apps/restrictions on it but have failed miserably and now my phone is stuck in a bootloop.
I was following this guide if it helps: http://forum.xda-developers.com/note-4/general/root-note-4-sm-n910c-t2977948 and downloaded the appropriate Snapdragon version (SM-N9109W).
I cannot enter recovery mode by holding down *power+vol up+home* as it just keeps on rebooting. I can, however, get into the downloader by holding down *power+vol down+home*.
I have tried for the entirety of today to find a specific guide for the Chinese note 4 on xda, youtube and google but to no avail - nothing that I can find is identical to my situation and I am hesitant to do anything further to it by following a similar guide in case I make it worse.
I have repeatedly seen suggestions to "flash" stock rom and as I can get into the downloader I believe this would be a great starting point, but once again I am afraid to do anything without a specific guide for the N9109W.
A few people have referred to SamMobile to download stock rom, but a search for SM-N9109W lists 8 files for 4.4.4 and I believe I have no way of working out my PDA or CSC, yet again I don't know what these even are and they might not be relevant?
Any assistance in getting my phone's software back to "out of the box" conditions would be GREATLY appreciated.
Thank you for your time and patience,
Ryan

If you can enter Download mode then you can flash that firmware you found matching your device's exact model no. via Odin. Just put the ROM in AP/PDA tab (PDA for older Odin versions, AP for new) and hit start.

ithehappy said:
If you can enter Download mode then you can flash that firmware you found matching your device's exact model no. via Odin. Just put the ROM in AP/PDA tab (PDA for older Odin versions, AP for new) and hit start.
Click to expand...
Click to collapse
Thank you ithehappy for the reply,
When I search for the stock firmware on SamMobile, I type in my exact model number (SM-N9109W). This search returns with a list of multiple different versions for my phone, of which 8 are 4.4.4 (my initial version).
Does it matter which version I download and install?
To my knowledge, I have no way of finding my CSC or PDA unless you know of a database I can use to search the information that is physically on my phone? Once again, does it matter that I know what these are or can I simply download, for example, version 5.1.1 and flash that on instead of my original 4.4.4? Or, will this just cause further possibly unfixable problems?
Thank you for your help

Anyone?

No, you can download any one you want.

Thank you for the help, ithehappy. I now have a working phone!
For future readers, I downloaded the latest version of 4.4.4 that SamMobile had (2015-03-27) for my model (SM-N9109W):
PDA: N9109WKEU1ANL3
CSC: N9109WCTC1ANL3
It failed the first time I tried flashing with Odin 3.10.7, but whilst I was hastily taking screenshots of my problem to post here I accidentally started the transfer again and it successfully installed that time.
I followed the instructions on SamMobile for the installation.
This version of the firmware I installed does not have any google services (thank China for that), so keep that in mind.
Thank you

[Q] G930V to G930U Conversion (Explain please)

Hello, All!
I have a G930V (Verizon S7) Non-EDGE, and I wan't to convert it to a G930U Unbranded (Or at least bloat free).
## BY THE WAY ##
Yes, I have seen other threads on this topic. Doesn't answer my confusions though.
Threads by:
tvm2487 (G930U Firmware)
James.Markham0757 (Can someone send me in the right direction...)
DeathAngel66669 (Using SamFirm to download SM-G930U-G930UUEU2APG9...)
## BY THE WAY ##
So anyways here are my questions.
##
1. Looking through Sammobile or Updato I see that a the newest version is
(G930UUEU2APEH) on (XAA), Would that work for the VZW Variant if not, What can i use?
2. Regarding my phone's below details would i be able to convert it to any of the 'U' Firmwares?
3. I don't wan't to trip any security features or mess with KNOX, really don't want to root.
Really just wan't to keep my warranty. Granted I will probably lose that by not using VZW firmware.
4. I thought flashing firmwares not similar to your phone will brick it permenantly. Why does the 'U' firmware run on the 'V'?
5. If i can flash the firmware (Odin?), What should i tick in the boxes for it to flash perfectly fine without errors?
Given this would be my first Samsung Tweaking.
6. Besides the Verizon bloat, What other cons are in the 'U' firmware that I should know about before doing the procedure?
7. Chances of bricking the phone? Would it be reversible?
##
My current S7 VZW Details:
Model: SM-G930V
Ver: 6.0.1
Patch Level: October, 1, 2016
Baseband Ver: G930VVRU4API3
I appreciate the help and your time. Thanks !

1. Looking through Sammobile or Updato I see that a the newest version is
(G930UUEU2APEH) on (XAA), Would that work for the VZW Variant if not, What can i use?
I don’t think it would flash as it is bootloader 2(5th character from right) latest firmware is 4!
2. Regarding my phone's below details would i be able to convert it to any of the 'U' Firmwares?
From what I understand all the USA variants of the Galaxy S7's are the same hardware
3. I don't wan't to trip any security features or mess with KNOX, really don't want to root.
Really just wan't to keep my warranty. Granted I will probably lose that by not using VZW firmware.
I have an AT&T branded S7 SM-G930A and have flashed the U firmware and used it for a while. I have now switched carriers to T-Mobile used the U firmware without issues and now flashed the T-Mobile firmware and it works fine. KNOW IS NOT TRIPPED.
4. I thought flashing firmwares not similar to your phone will brick it permenantly. Why does the 'U' firmware run on the 'V'?
Not sure, Odin may just fail to complete install?
5. If i can flash the firmware (Odin?), What should i tick in the boxes for it to flash perfectly fine without errors?
Given this would be my first Samsung Tweaking.
I never had luck flashing the HOME-CSC file, had to use straight CSC.
6. Besides the Verizon bloat, What other cons are in the 'U' firmware that I should know about before doing the procedure?
One thing I did notice is the visual voicemail app tends to work better when using the specific carrier firmware(both AT&T & T-Mobile).
I'm using T-Mobile and I don't see a need to go back to U at this time as their is not much bloat on the T-Mobile firmware.
7. Chances of bricking the phone? Would it be reversible?
##
I just installed T-Mobile Nougat on my phone and got the error on phone and it was stuck on “You will need to use Smart Switch Recovery” to fix phone! SCARY!!! I managed to finally get firmware installed and running!

Understood.
When I get home today I'll try to install a newer version from SamMobile.
Updato has older versions. Sammobile has the latest which is.
G930U with code (VZW) on
G930UOYM4APL2
(https://www.sammobile.com/firmwares/download/118975/G930UUEU4APL2_G930UOYM4APL2_VZW/)
Would this be compatible?

G930UUEU4APL2 is the latest U-firmware. Everything flashes correctly, it won't trip KNOX, and it is super easy to go back to G930V firmware if you decide you want to send it back for warranty. You can't brick the phone by flashing signed files with Odin. The bootloader won't allow Odin to flash anything that could brick it.
I had already started replying before you posted above me. I'd recommend using my link to the firmware, as Sammobile downloads take FOREVER.

I see, I'm glad.
So, What would i need to make sure to do and not do in Odin 3.11.1?
AP/BL/CP/CSC from your zip? Just flash everything or only certain things?
Re-partition tick box? yes or no?

Flash all four of those files and DON'T CHANGE ANY Odin settings.

Okay. I just flashed it and now my phone repeatedly keeps booting into recovery.
The recovery logs and the red text at the bottom says:
dm-verity verification failed
Need to check DRK first...
Any ideas?

##PREVIOUS##
I think it might have to be because I used HOME_CSC rather than CSC.
What's the difference between both? Can i revert later?
##PREVIOUS##
@CVertigo1
I reflashed with the CSC file rather than the HOME_CSC file as according to your instructions in your thread (Latest G930U Firmware) and it worked perfectly fine!
KNOX is still at 0x0 and warranty void is fine.
( https://forum.xda-developers.com/verizon-galaxy-s7/how-to/g930u-firmware-pl2-g930v-success-t3558214 )
No bloat, amazingly fast, and some features i like are present. I'll report back to your thread on the battery life when i get more time with it.
I appreciate your patience.
(Will post screenshots later).

Home_CSC doesn't wipe user data, which causes issues when swapping firmware. That's what caused your bootloop.

Followed this, today, was sick and tired of the damn Verizon bloat slowing the phone down.
The phone runs faster - notably faster.
After installing the SIM, the phone returns, "Your device will restart to configure features supported by the new SIM card."
And then" It's useless. If I hard-power reset it, and take out the SIM, it's viable - it's just useless otherwise.
Phone is a G930V, flashed to G930U.
Any Suggestions? The phone is *NOT* rooted, so I can't easily take out or rename the AutoPreconfig.apk package.. Argh.

Will I get the android nougat update on this ROM?

Just converted G930V to G930U, all 100% working here in the UK. Fully debranded and no verizon warning about sim change. perfect

Mind telling me what thread you used to find the latest firmware? This forum for the phone is so rarely used anymore, it's hard to tell what info to go even go on anymore.
Is PL2 the latest for 930U? I'm VZW but US, not UK

Guide to unroot and install Nougat on Galaxy S7

Note - this is for the SM-G930A AKA AT&T model only. Unrooting and flashing firmware works the same way for other carriers, but with different files.
Hi everyone, I just thought I should share how I went about unrooting my S7. I initially rooted it while it was running Nougat already, and I liked the extra customization options. However, I found after several months of using it that the only real feature that I personally liked about having a rooted S7 was the ability to "try" paid apps for free using Lucky Patcher.
The downside of rooting, for me anyway, was severely slow laggy touch inputs and general phone performance. Sometimes - especially after a reboot - I experienced slightly better performance, but overall it just got too annoying. The app that gave me the most trouble was Google Maps. That's why I decided to cut my losses and unroot; I'd figured out which apps I actually wanted to buy since I'd already used them for a while (I will miss free in-app purchases though ).
So after some Googling and reading up, I decided to try for myself. I was already running baseband version G930AUCU4BQA4 before I rooted, so I thought maybe I could just flash stock Nougat and be done. However, all the guides I read say to flash a stock firmware, so that's what I did to be safe.
So first I downloaded the stock firmware for my phone from a website called rootmygalaxy, on the Download Stock ROM For AT&T Galaxy S7/S7 Edge (SM-G930A/SM-G935A) page (being a new user sucks).
After that, I used the stock, unpatched version of Odin v3.12.3, (from Odin's website) to flash the stock firmware onto my phone. It should be noted that the steps you take to flash a firmware to download mode should be 1. Open Odin, 2. Put phone in download mode, 3. plug the phone in. I had some failures in Odin because I was doing that wrong. Steps one and two are probably interchangeable, but just make sure plugging in the phone is the last thing you do. Also, make sure you have ticked USB Debugging and OEM Unlock under developer options before you do any flashing.
Once that was complete, I rebooted my phone and set up Android 6.0.1 on the phone. After a full 24 hours, I still couldn't get any OTA updates, so I decided to manually flash Nougat because it is so much better than Marshmallow.
This guide on the website droidviews called Install Android 7.0 Nougat on AT&T Galaxy S7/ S7 Edge (SM-G930A/ G935A) was very helpful.
Take note of the fact that the guide references baseband versions by the last 4 characters, i.e. G930AUCU4BQA4 becomes just BQA4. I checked my baseband version, which ended in APJ4. According to that guide, all I had to do was flash APK1 and then I'd be set to update to Nougat, so that's exactly what I did.
After again flashing via the 4-file method with Odin, I set up the phone again so I was back at the home screen. I downloaded both the APK1 and the .zip file containing Nougat while my phone was charging (from 90%, my phone was at ~50% by the time I had Nougat up and running), and I placed the .zip Nougat update onto an SD card that I usually keep in the phone. Once APK1 was set up, I put the SD card back in, rebooted into Recovery Mode, and waited until the manual screen came up. Then I simply chose update from SD card, chose the .zip file I'd placed in there, and waited. After a while, I was greeted by a new setup screen. I set up Nougat and now it's running just fine.
The only issue I'm seeing is that I'm still not getting any OTA updates. I hope that doesn't continue, but if it does I can just update via .zip or something.
Thanks for reading!

where did you get the nougat.zip?

Custom binary blocked by frp lock

need urgent help really.
my phone has been rooted and has twrp installed for months now with no issues, all of a sudden my phone rebooted to the samsung logo screen with the mentioned error message. i have no idea how and why this error has occured but my phone wont boot to system. i really dont want flash stock firmware as i havent backed things up, is there a way to fix this issue with out doing a full wipe?

you might have accidentally disable oem unlock. so phone is bricked , and you need to flash stock firmware with odin , no other choices . and as you know knox counter will stay 0x1 , root or no root, once you break knox its permanent as knox is hardware, once you root it break an electronic fuse so once you flash stock firmware I really suggest you to install custom rom and twrp again as many things will be blocked if you stay on stock firmware as your device will stay marked as " rooted "

robhug said:
you might have accidentally disable oem unlock. so phone is bricked , and you need to flash stock firmware with odin , no other choices . and as you know knox counter will stay 0x1 , root or no root, once you break knox its permanent as knox is hardware, once you root it break an electronic fuse so once you flash stock firmware I really suggest you to install custom rom and twrp again as many things will be blocked if you stay on stock firmware as your device will stay marked as " rooted "
Click to expand...
Click to collapse
Yeah I had to do firmware install in the end. It's just crazy though. I very rarely go into dev options, I had noto kernel installed and everything on stock aqh3, rooted with magisk and everything worked great, so annoying as this happened at 3am and I have slow internet connection and took me 2 hours to download the 3.5gb firmware file. Urgh o was on the verge of installing a custom rom too, ah well good job I had a lot of stuff saved in Samsung cloud.

sofir786 said:
Yeah I had to do firmware install in the end. It's just crazy though. I very rarely go into dev options, I had noto kernel installed and everything on stock aqh3, rooted with magisk and everything worked great, so annoying as this happened at 3am and I have slow internet connection and took me 2 hours to download the 3.5gb firmware file. Urgh o was on the verge of installing a custom rom too, ah well good job I had a lot of stuff saved in Samsung cloud.
Click to expand...
Click to collapse
yes hopefully cloud is our new god ^^ yes its annoying I agree but its also a great feeling to begin with a clean phone like new after a reset , and I have also a crappy download speed so yes its a pain to download 4gb , and even better when its corrupted and need to download agin good luck with your device

Hey guys I need help.
My phone got bricked as you said (I accidentally turned off OEM unlock on my rooted phone) so I tried to flash stock firmware, but odin fails and on my phone it says (sw rev. check fail. device:3 binary:2). Plz help!
My phone: S8+
FIRMWARE: CRF7
FRP LOCK: ON
OEM LOCK: ON

Just had the very same problem meself ?
Thank god for Odin and https://updato.com/
Bt like previous posters says its like havin a new phone apart from samsung pay not working

Can someone help??
I got the "FRP lock" on my Samsung S8 (Exynos) and tried to flash Stock Oreo but Odin fails and the device shows "KERNEL REV. CHECK FAIL. DEVICE:3 BINARY:2".
This stock Samsung Rom worked earlier today so it should be the right Rom for my phone.
Also tried to flash TWRP recovery via AP in Odin which failed with "RFP lock" message showing on the device..
I tried to add a snapshot here but couldn't.
Anyone please, I'm helpless..

nattyniz said:
Can someone help??
I got the "FRP lock" on my Samsung S8 (Exynos) and tried to flash Stock Oreo but Odin fails and the device shows "KERNEL REV. CHECK FAIL. DEVICE:3 BINARY:2".
This stock Samsung Rom worked earlier today so it should be the right Rom for my phone.
Also tried to flash TWRP recovery via AP in Odin which failed with "RFP lock" message showing on the device..
I tried to add a snapshot here but couldn't.
Anyone please, I'm helpless..
Click to expand...
Click to collapse
Your issue is trying to flash older firmware than what is on your phone. You will need to download firmware with bootloader ver. 3 or higher ( bl ver no. is 5th number from right of firmware name )
Flashing twrp failed because of locked bootloader.

spawnlives said:
Your issue is trying to flash older firmware than what is on your phone. You will need to download firmware with bootloader ver. 3 or higher ( bl ver no. is 5th number from right of firmware name )
Flashing twrp failed because of locked bootloader.
Click to expand...
Click to collapse
That helped. Flashing the right version worked just fine.
Thanks!!

FRP lock
Hi people,
I got the "FRP lock" on my Samsung S8 SM-G950F(Exynos) and tried to flash Stock Oreo but when I press start Odin say PASS but recovery won't start.
please help

i flashed my S8 SM-G9500 variant however the phone has been locked and it is saying that i need to see the samsung service provider for the device has been locked. how can i solve this problem

Mark Nyombi said:
i flashed my S8 SM-G9500 variant however the phone has been locked and it is saying that i need to see the samsung service provider for the device has been locked. how can i solve this problem
Click to expand...
Click to collapse
can you get a pic of the screen youre talking about?

Hello guys i rooted my S8+ G-955F and i turned off usb debugging and ome lock
And i have android 9 installed on my device, i tried all the way but for nothink , any help please

S7 SM-G930P ~ Boot Loader Issues? SW REV CHECK FAIL : [ABOOT]FUSED 5 > BINARY 4

Hi All.
Thank you for any help you might give me in advance with this issue...
Last week, I tried to root the phone with the SM-G930P CF-Autoroot heroqltespr files with Odin found in this forum. I have rooted a few other phones but am no expert. The root after a few attempts failed (verified a few ways), however, some files must have been affected because the phone "identifies" as heroqltespr. Identifies as when I could plug into my PC heroqltespr would be the name. It was not set this way in the obvious name your device areas. I ended up doing a hard reset to clear the phone and other than the ghost naming everything was working fine.
A day or 2 ago Sprint rolled out a new OTA update which the phone installed. Since then the phone was draining battery life. After uninstalling and reinstalling the SD card today, it seems to have tripped a "Security Notice: Unauthorized Actions". That is when the trouble started. The phone started running hot, basically leaking battery power, and was all lagging. I'm assuming the CPU going Ludicrous speed.
Now, I am in a Samsung Splash screen loop, or or a recovery loop. The only thing it does is go into download mode.
I have tried flashing stock firmware, it fails. I've tried flashing with and without the SD or Sim card. Not really sure what I should be doing. The "P" version of my phone seems to be the bastard child of S7s. Any help you guys cold give me would be great. THANK YOU!
The Download Screen Reads:
Odin Mode (High Speed)
Current Binary: Samsung Official
System Status: Custom
FAP Lock: Off
Warranty Void: 8x8
Qualcomm Secure Boot: Enabled
AP SWREV: 85(2,1,1,1,1) K1 S4
I get this error when I try to flash back to stock SW REV CHECK FAIL : [ABOOT]FUSED 5 > BINARY 4

Stupid question but is your phone in a case?

Sw rev check fail : [aboot]fused 5 > binary 4
freakboysays said:
Stupid question but is your phone in a case?
Click to expand...
Click to collapse
No it isn't.
I get this error message on the download screen. SW REV CHECK FAIL : [ABOOT]FUSED 5 > BINARY 4

I fixed it.
5 > BINARY 4 error, has to do with a Version 5 bootloader Sprint came out with in 2018. The fact that this is only affected by the SM-G390P further complicates things for the average user. Users on version 5 bootloader will need to wait until/If a version 5 universal bootloader for the SM-G930U to get unbloated firmware. Information on restoring your S7 SM-G930P to where you left off before you started trying to root your phone can be found below. More info on Sprint F'n us and BL Version 5 can be found here
https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/. There was a post on XDA (which I can't find) which gave the idea that Sprint came out with this version 5 bootloader to prevent people from flashing the phones to the U version and going overseas with them.
The stock files for the first version of Sprint Version 5 bootloader firmware dated 1-1-18 can be found here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930P/SPR/download/G930PVPS5BRA1/206876/
Unzip. Only have auto reboot and Re-partition checked as options in Odin.

If you dont mind me asking, did you ever find a way to root the G930P with the 5th bootloader updates? Is it even possible at this point in time? Im new when it comes to rooting but with the amount of time Ive spent browsing the web it seems as if there is nothing. Thanks.

tonysak said:
I fixed it.
5 > BINARY 4 error, has to do with a Version 5 bootloader Sprint came out with in 2018. The fact that this is only affected by the SM-G390P further complicates things for the average user. Users on version 5 bootloader will need to wait until/If a version 5 universal bootloader for the SM-G930U to get unbloated firmware. Information on restoring your S7 SM-G930P to where you left off before you started trying to root your phone can be found below. More info on Sprint F'n us and BL Version 5 can be found here
https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/. There was a post on XDA (which I can't find) which gave the idea that Sprint came out with this version 5 bootloader to prevent people from flashing the phones to the U version and going overseas with them.
The stock files for the first version of Sprint Version 5 bootloader firmware dated 1-1-18 can be found here:
https://www.sammobile.com/firmwares/galaxy-s7/SM-G930P/SPR/download/G930PVPS5BRA1/206876/
Unzip. Only have auto reboot and Re-partition checked as options in Odin.
Click to expand...
Click to collapse
I got screwed by this, I accidentally installed the P firmware, and now I cannot load U firmware because of this 5 > 4 error. I went to the blog you posted (arencambre), and I am only able to install the U firmware modem (CP package in Odin), everything else has to be P. And because of the P firmware, I am unable to edit APN settings to enable my native Hotspot. Is there anything I can do, besides wait for U firmware to come out with a Version 5 bootloader?

Chanman said:
I got screwed by this, I accidentally installed the P firmware, and now I cannot load U firmware because of this 5 > 4 error. I went to the blog you posted (arencambre), and I am only able to install the U firmware modem (CP package in Odin), everything else has to be P. And because of the P firmware, I am unable to edit APN settings to enable my native Hotspot. Is there anything I can do, besides wait for U firmware to come out with a Version 5 bootloader?
Click to expand...
Click to collapse
EDIT: Nevermind...sounds like you aren't on sprint.

lvpre said:
EDIT: Nevermind...sounds like you aren't on sprint.
Click to expand...
Click to collapse
Actually, I am on Sprint, and your directions were awesome, thank you so much! The only thing I had to do was change the line to:
settings put global tether_dun_apn "APNDUN,n.ispsn,,,,,,http://mms.sprintpcs.com,68.28.31.7,80,310,120,,default,dun,mms,supl"
I'm going to put a link to the thread so others can refer to it. https://forum.xda-developers.com/sprint-s7-edge/how-to/hotspot-bypass-nougat-ok-t3563446

Hi all,
EDIT: I posted this in another thread that was about two years old, where I followed the instructions that caused this: https://forum.xda-developers.com/sp...msung-galaxy-s7-sm-g930p-root-xposed-t3503599
That thread seems dead-ish and if you managed to fix this issue maybe you can help me also. Also what was lvpre's original post before he edited it, and would it apply here?
So the worst has happened - got a new (used) phone from Boost Mobile, tried this guide, and now I can only boot to the "An error has occured while updating the device software. Use the Emergency Recovery function in the Smart Switch PC software." screen. Sometimes it does take me to the original "Download mode" screen.
Now, I should be able to resolve this by flashing the original firmware correct? (As in, the firmware that was installed when it came)? Or does it just need to be firmware from the same date range that has the same bootloader? ODIN will still let me attempt flashing on this screen, but I still get the same error when I try again, which on the Download mode screen showed "SW REV CHECK FAIL : [system]Fused 4 > Binary 1"
Any advice here? My S6 bricked when somehow OEM unlock enabled itself and I can't get around the FRP lock, I will be VERY annoyed if the same thing happens with a NEW phone. If I can't fix this I am never buying Samsung again. Any advice on this is very welcome! I emailed Boost to ask them which firmware is installed (because I'm an idiot and didn't write it down but have never had flashing go this wrong before).
EDIT: Booting to recovery just shows a blue "RECOVERY BOOTING...." for a second in the corner and gives a recovery bootloop, just keeps flashing that.
EDIT: I apparently tried to flash an earlier bootloader/etc through ODIN according to the directions in the post I linked above, and after that I now have this problem. Nobody else in the thread seems to have had this problem, and your post is the closest to anything I can find on this issue. I would be in your eternal debt if you could help me out here.
PLEASE HELP!
EDIT: Theoretically if I can find the original firmware it was on I should be fine, right? Everywhere I read if flashing goes wrong you just flash the original stock on it. I guess worst case scenario I download gigs upon gigs of firmwares for Sprint 930P over the last year and find the one that sticks? Or is the fact my recovery is bootlooping and I can only go into download mode mean I'm bricked?

Hello all,
To follow up on my last post, I found success restoring to stock via this firmware:
G930PVPU4BQH1_G930PSPT4BQH1_SPR_7.0.zip
https://www.androidfilehost.com/?fid=817550096634799807
I left my original post just in case anyone messes this up the way I did. I still need root, but now I know how to reset to stock in the event this happens again.
For the record I bought a used Samsung Galaxy S7 off the Boost website.
IF YOU FOLLOW THIS GUIDE, OR ANY, MAKE SURE TO GO INTO "SETTINGS -> ABOUT PHONE" AND MARK DOWN WHAT FIRMWARE THE PHONE IS CURRENTLY ON AS STOCK. THIS WILL SAVE YOU A HEADACHE TRYING TO FIGURE OUT WHICH FIRMWARE YOU NEED TO DOWNLOAD IF THINGS GO WRONG. DO NOT PAY FOR A FIRMWARE DOWNLOAD OR USE FILESHARE SITES, GO HERE: https://simunlockremote.com/galaxy-s-series-firmware/ AND FIND THE VERSION YOU ARE ON AND IT WILL DIRECT YOU TO A FAST GOOGLE DRIVE LINK.
Thanks to all the hard work all the devs have done that have gotten use. I still need root soooooooooo if anyone knows how to do that let me know!
CHEERS! I am so happy right now

slvmecha said:
Hello all,
To follow up on my last post, I found success restoring to stock via this firmware:
G930PVPU4BQH1_G930PSPT4BQH1_SPR_7.0.zip
https://www.androidfilehost.com/?fid=817550096634799807
I left my original post just in case anyone messes this up the way I did. I still need root, but now I know how to reset to stock in the event this happens again.
For the record I bought a used Samsung Galaxy S7 off the Boost website.
IF YOU FOLLOW THIS GUIDE, OR ANY, MAKE SURE TO GO INTO "SETTINGS -> ABOUT PHONE" AND MARK DOWN WHAT FIRMWARE THE PHONE IS CURRENTLY ON AS STOCK. THIS WILL SAVE YOU A HEADACHE TRYING TO FIGURE OUT WHICH FIRMWARE YOU NEED TO DOWNLOAD IF THINGS GO WRONG. DO NOT PAY FOR A FIRMWARE DOWNLOAD OR USE FILESHARE SITES, GO HERE: https://simunlockremote.com/galaxy-s-series-firmware/ AND FIND THE VERSION YOU ARE ON AND IT WILL DIRECT YOU TO A FAST GOOGLE DRIVE LINK.
Thanks to all the hard work all the devs have done that have gotten use. I still need root soooooooooo if anyone knows how to do that let me know!
CHEERS! I am so happy right now
Click to expand...
Click to collapse
Don't take any updates. My edited post was on how to get hotspot working. There is a thread here about it, but I changed a line of code.

Switched from Sprint to T-Mobile. Am I out of luck?
lvpre said:
Don't take any updates. My edited post was on how to get hotspot working. There is a thread here about it, but I changed a line of code.
Click to expand...
Click to collapse
I've got a Galaxy S7 G930P from Sprint. I just switched to T-Mobile a couple months ago and brought my S7 phone with me. I was hoping to flash my rom to either the G930U or the G930T (T-Mobile) version, but both are still bootloader v4 and I hit the same error that everyone else on this thread was hitting.
My main problem is that my S7 phone can't send/receive MMS messages on T-Mobile, even after updating the APN settings, and, even worse for me personally - my phone gets below average reception everywhere I go, presumably because my Sprint G930P rom has locked down some of the bands that T-Mobile uses.
Aside from getting a new phone, do I have any options? Or am I stuck waiting for either a G930T or a G930U update based on bootloader 5?

jbuck2 said:
I've got a Galaxy S7 G930P from Sprint. I just switched to T-Mobile a couple months ago and brought my S7 phone with me. I was hoping to flash my rom to either the G930U or the G930T (T-Mobile) version, but both are still bootloader v4 and I hit the same error that everyone else on this thread was hitting.
My main problem is that my S7 phone can't send/receive MMS messages on T-Mobile, even after updating the APN settings, and, even worse for me personally - my phone gets below average reception everywhere I go, presumably because my Sprint G930P rom has locked down some of the bands that T-Mobile uses.
Aside from getting a new phone, do I have any options? Or am I stuck waiting for either a G930T or a G930U update based on bootloader 5?
Click to expand...
Click to collapse
If your phone is uicc [sim] unlocked from sprint... you can try the following.
1. Odin a dec/Jan firmware...like QJ3. But replace the cp slot with the file from the latest u firmware. This is the modem file.
2. When your phone starts, you will receive a pop up message, just hit cancel.
3. Install a package disabler like sabs, bk, adhell2. Disable securitylogagent . This should remove the annoying message. Sabs takes a little effort to setup, but you may need it for the disabler part. Restart after disabling.
4. Pop in sim. See if the additional bands are unlocked.
If you fail, you can always just odin back to a v5 sprint firmware. But don't try it unless you are stuck on the current firmware and your phone is doing nothing. It won't brick your phone.
While the firmware is not downloadable, modem files can downgrade one major update.
This worked for me, but I only have sprint and haven't tried it elsewhere.
Here is an article https://www.arencambre.com/blog/2018/01/01/fused-firmware-version-locks-samsung-s7/comment-page-1/

Is this triggers the knox counter ?