Odin3 Error | Note 4 - Galaxy Note 4 Q&A, Help & Troubleshooting

Hi,
I am trying to go back android 5 from 6. So I download the custom 5.1.1 rom. But odin keeps failing. ( Usb driver is fine. )
Galaxy Note 4 SM-910CQ - 32GB
HTML:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!

I have the same problem. Mine stops at system.ext4 write.

we both need help pls guys

I need help too,
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!

Hi friends, I just figured it out....
What you need to do is Download the Stock 6.0.1 Rom from SamMobile and flash it thru Odin, and that's it !!
Hope this works for you as worked for me!

5
Thank you for respond but I am not asking for 6.0.1 Rom
I want to go back to Android 5 from 6.

You cannot flash a custom ROM with ODIN . Use TWRP for that. And for going back to Lollipop, you need to flash a suitable Bootloader and Modem first.

looks like I need to google it...
what about cyanogenmode ? anyone of you used it before (note4)

opticon107 said:
I need help too,
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
I just f,gured it by myself.
dont flash the 1st file from odin only flash the file

Related

My note 3 failed during odin firmware update to KitKat 4.4.2

Now I can’t install firmware or go into recovery mode but I can still get to download screen.
okizen said:
Now I can’t install firmware or go into recovery mode but I can still get to download screen.
Click to expand...
Click to collapse
Cant you go to the download screen and set ODIN away again?
Thats how I did it.
trubster said:
Cant you go to the download screen and set ODIN away again?
Thats how I did it.
Click to expand...
Click to collapse
Hi trubster, I've reset odin and my phone into download mode several times. The odin update process starts off ok but always fails when it reaches 'SYSTEM'.
okizen said:
Hi trubster, I've reset odin and my phone into download mode several times. The odin update process starts off ok but always fails when it reaches 'SYSTEM'.
Click to expand...
Click to collapse
What message is ODIN giving in the white text box?
have you tried re-downloading the ROM? I used the MEGA link and it worked fine.
N9005XXUENA6_N9005OXXENA5_XEO.zip is the one you need if it is for the N9005, you need the stock 4.4.2 FW before you can put CFW on
trubster said:
What message is ODIN giving in the white text box?
have you tried re-downloading the ROM? I used the MEGA link and it worked fine.
N9005XXUENA6_N9005OXXENA5_XEO.zip is the one you need if it is for the N9005, you need the stock 4.4.2 FW before you can put CFW on
Click to expand...
Click to collapse
These are the messages I get from odin (from the beginning).
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
I should also mention that I has tripped my Knox to 0x1as I've always got on without one but I doubt if that would be the cause.
That file seems to be different, are you using a N9005?
https://mega.co.nz/#!jZYkyY5a!HfiJlXRgp_ZGWoQncFNWeEn5FnY_0i9iFb23EGfg2Nk
Thats the file I used first, put it in the PDA or AP box on odin and click start.
Should have no problems with it as it is an "Official" Sammy Rom
If you have a Hong Kong note you need to have a read around, If not, grab XEO firmware flash via odin 1.85 or 3.07
trubster said:
That file seems to be different, are you using a N9005?
https://mega.co.nz/#!jZYkyY5a!HfiJlXRgp_ZGWoQncFNWeEn5FnY_0i9iFb23EGfg2Nk
Thats the file I used first, put it in the PDA or AP box on odin and click start.
Should have no problems with it as it is an "Official" Sammy Rom
Click to expand...
Click to collapse
Sorry trubster, I missed out a part of the message in odin.
This is the FULL message in it's entirety.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
I've also tried the firmware from your link but unfortunately the results were the same.
I didn't experience this on my N9005 while updating, but I experienced this before on my S3, it was due to corrupted firmware file.
Please help me!!! Please!!!
okizen said:
sorry trubster, i missed out a part of the message in odin.
This is the full message in it's entirety.
<osm> enter cs for md5..
<osm> check md5.. Do not unplug the cable..
<osm> please wait..
<osm> n9005xxuena6_n9005oxxena5_n9005xxuena2_home.tar.md5 is valid.
<osm> checking md5 finished sucessfully..
<osm> leave cs..
<id:0/003> added!!
<id:0/003> odin v.3 engine (id:3)..
<id:0/003> file analysis..
<id:0/003> setupconnection..
<id:0/003> initialzation..
<id:0/003> get pit for mapping..
<id:0/003> firmware update start..
<id:0/003> aboot.mbn
<id:0/003> nand write start!!
<id:0/003> sbl1.mbn
<id:0/003> rpm.mbn
<id:0/003> tz.mbn
<id:0/003> sdi.mbn
<id:0/003> non-hlos.bin
<id:0/003> boot.img
<id:0/003> recovery.img
<id:0/003> system.img.ext4
<id:0/003> complete(write) operation failed.
<osm> all threads completed. (succeed 0 / failed 1)
<id:0/003> removed!!
<id:0/003> added!!
<id:0/003> removed!!
I've also tried the firmware from your link but unfortunately the results were the same.
Click to expand...
Click to collapse
i am also having this problem
it seems i cant flash other firmware other than poland fw...
I want ro revert back to ksa firmware or anygood fw since poland svoice isnt working fine<< sorry for bag english
please help me
i have flash my fw with kk italy, and spain but to luck,,, still having the same result... Failed!!!
Please please
u have to download hungry firmwar from sammobiles.com..it will b ok.and tick update boot loader must
clowrid1128 said:
i am also having this problem
it seems i cant flash other firmware other than poland fw...
Click to expand...
Click to collapse
I had the same problem... Just try to flash with this version of ODIN:
https://mega.co.nz/#!RVVXSYiY!6lynzTh-II8o8rvfYkdZzrYa_7m2F-CKgtItMZA66v4
I had the same problem today.The solution is here http://www.cultofandroid.com/53963/save-galaxy-note-3-failed-kitkat-update-odin-tip/
Now i am with german kit kat (DBT) and everything is ok !!!!!! :good::good::good:
Help me (SAM SM-N900S)
<ID:0/023> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N900SKSU0GPI1_CL9178490_QB10835717_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N900SKSU0GPI1_CL9178490_QB10835717_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_SKT_N900SSKT0GPI1_CL9178490_QB10835717_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N900SKSU0GPI1_CL9178490_QB10835717_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/023> Removed!!
<ID:0/028> Added!!
<ID:0/028> Odin engine v(ID:3.1005)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Set PIT file..
<ID:0/028> DO NOT TURN OFF TARGET!!
<ID:0/028> FAIL!
<ID:0/028>
<ID:0/028> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/028> Removed!!
<ID:0/028> Added!!
<ID:0/028> Odin engine v(ID:3.1005)..
<ID:0/028> File analysis..
<ID:0/028> SetupConnection..
<ID:0/028> Initialzation..
<ID:0/028> Set PIT file..
<ID:0/028> DO NOT TURN OFF TARGET!!
<ID:0/028> FAIL!
<ID:0/028>
<ID:0/028> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/028> Removed!!
:crying:
Why are you flashing Kitkat ??
What phone have you got and what have you done before .
PIT showing as no partition fail .

SGH-i337M Virgin Mobile

1. Rooted via Towelroot on 4.3, then when new OTA update came up i just clicked on install and it went through fine, another update came up 4.4.2 and i clicked on update went through fine, now 5.0.1 came out when i clicked on update went through up to 28% and then said failed,
Now stuck on Firmware having issue connect to Kies which i did but indicated failed
Then i connected via Odin,
Files i got was ( MF3 TARs )
Placed the phone on downloading mode
Tried didn't go through asking for PIT so i found a file loaded
still no go
Log from Odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PLATFORM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_I337UCUAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I337ATTAMF3_812098_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Removed!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Removed!!
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Removed!!
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse

Help soft bricked my wives phone. Odin fails

I originally put on Cyanogenmod but tried to change it back to stock. I tried up use Odin to put stock on but i think i may have put on a wrong version.
I am from the UK and have the 505 version. I9505XXUFNC4.
Odin now says.
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_I9505OXAHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin engine v(ID:3.1005)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Set PIT file..
<ID:0/016> DO NOT TURN OFF TARGET!!
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> SingleDownload.
<ID:0/016> aboot.mbn
<ID:0/016> NAND Write Start!!
<ID:0/016> sbl1.mbn
<ID:0/016> sbl2.mbn
<ID:0/016> sbl3.mbn
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/016> Removed!!
<ID:0/016> Added!!
This is the log from a new PDA file
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_I535VRUCML1_I535VZWCML1_2198062_REV09_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> sbl1.mbn
<ID:0/016> NAND Write Start!!
<ID:0/016> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_I535VRUCNC1_I535VZWCNC1_2198062_REV09_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/016> Removed!!
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> sbl1.mbn
<ID:0/016> NAND Write Start!!
<ID:0/016> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/016> Removed!!
<ID:0/016> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOB7_I9505BTUHOB4_I9505XXUHOB7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> sbl1.mbn
<ID:0/016> NAND Write Start!!
<ID:0/016> sbl2.mbn
<ID:0/016> sbl3.mbn
<ID:0/016> rpm.mbn
<ID:0/016> aboot.mbn
<ID:0/016> tz.mbn
<ID:0/016> boot.img
<ID:0/016> recovery.img
<ID:0/016> system.img.ext4
<ID:0/016> modem.bin
<ID:0/016> NON-HLOS.bin
<ID:0/016> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/016> Removed!!
<ID:0/016> Added!!
Went further but still failed.
I changed the usb hub and the file went through but the screen is black with only a wifi symbol and the battery logo.
applelolk said:
I changed the usb hub and the file went through but the screen is black with only a wifi symbol and the battery logo.
Click to expand...
Click to collapse
You flashed a wrong firmware version for your device.
1. You have to flash this firmware now: HERE via ODIN but unmarking "Auto Reboot".
2. Let the process finish and pull off the battery.
3. Pull it in again, boot in Stock Recovery and Wipe data/Factory reset.
4. Reboot your device normally.

[HELP][HELP] SM-A510FD Unable to flash stock

I'm unable to restore stock rom in SM-A510FD.
Earlier i was able to restore stock using the same file but suddenly what happened. Please Help!!
When tried using odin this error come up ->
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> cache.img
<ID:0/005> cm.bin
<ID:0/005> hidden.img
<ID:0/005> modem.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
HELP!!HELP!!HELP!!HELP!!
@TheMadScientist Can yo please close this thread. Since no one helped me. lol
Although the problem is solved.
bunnyy95 said:
@TheMadScientist Can yo please close this thread. Since no one helped me. lol
Although the problem is solved.
Click to expand...
Click to collapse
Thread closed per OPs request:good:

Downgrade from stock Pie to Oreo using Odin failed

Hi all,
after a long wait Samsung released the first update to Pie for Tab S3 SM-T825 on december 2019 (ITV-T825XXU3CSK2-20191226114137); I hoped it would fix most issues I experienced since I had upgraded from Oreo, but it's still sluggish, battery life is much worse and I don't find anything better than Oreo in this release... the worst Android build I've ever seen!
I finally decided to downgrade, so I downloaded the latest Oreo version available for my region (ITV-T825XXU3BSD1-20190510143544) and Odin v3.13.3.
AFAIK everything should work fine because the bootloader for both ROMs is the same version (XXU3); I followed the standard instructions available on Sammobile: launched Odin, selected BL, AP, CP, CSC and hit Start.
The flashing process starts without problems but it fails after a few minutes while the device is downloading system.img. Tried several times but to no avail.
The device had usb debug on, in download mode I see FRP lock on, OEM lock on.
Can anyone please help? Below you can find the Odin log.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1303)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 5116 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!!
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> xbl.elf
<ID:0/005> tz.mbn
<ID:0/005> hyp.mbn
<ID:0/005> devcfg.mbn
<ID:0/005> pmic.elf
<ID:0/005> rpm.mbn
<ID:0/005> cmnlib.mbn
<ID:0/005> keymaster.mbn
<ID:0/005> apdp.mbn
<ID:0/005> msadp.mbn
<ID:0/005> cmnlib64.mbn
<ID:0/005> sec.dat
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Never mind, it finally worked!
I put the device in recovery mode, wiped cache and user data, then repeated the flash process with Odin and everything went fine.
Hello , can you please share the firmware , it will be a a good will as it takes ages to download from sam firmware.com , you can give me a google drive link , god bless !

Categories

Resources