hard reset my phone via twrp recovery and i accidentally wiped the system too. now when i try to reboot my device, it's just stuck on google logo. bootloader is still unlocked. fastboot and twrp are working perfectly too. i just can't figure out a way to push zip file to my phone. i trie using a couple of toolkits and all of them were stuck on device not found. any help would be greatly appreciated.
Boot into twrp, connect phone to the computer, copy rom to the phone, and flash from twrp.
audit13 said:
Boot into twrp, connect phone to the computer, copy rom to the phone, and flash from twrp.
Click to expand...
Click to collapse
i'm a windows user & my laptop doesn't recognize my device when i connect it. probably because it requires usb debugging to br turned on which i can't do because no os.
Related
Delete
Nikolay15 said:
I tried to install twrp on my d802 and the first method didnt work ,so i tried the second and it looked like it had worked but when I rebooted in recovery it said :
boot certification verify
secure booting eror
couse: boot certifiction verify
and after that it goes to a black screen.
I also tried to boot into bootloader and it just booted up normaly. The phone works normaly it can boot. I am on kitkat stock rooted I also tried instaling other recoverys like cwm philz and other versions of twrp and it didnt work.
Shoud i try doing this http://forum.xda-developers.com/showthread.php?t=2582142 , or there's some easiar way
Click to expand...
Click to collapse
If you can get your PC to recognize your phone with the phone's drivers installed, then you have hope. If you can still get into android itself, install twrp installer from the Play Store. Update to the latest recovery from there (assuming your rooted).
If you cannot get into android, but when pressing volume up while plugging a usb cable connected to a PC in, your phone is recognized by the PC, you have to flash the stock KDZ file using the R&D test tool that floats around on these forums. It will unroot your device, but it will give you the chance to start clean and unharmed.
For me, I have to send mine in under warranty because now my G2 doesn't even pop up on Windows or Linux.
MDA400 said:
If you can get your PC to recognize your phone with the phone's drivers installed, then you have hope. If you can still get into android itself, install twrp installer from the Play Store. Update to the latest recovery from there (assuming your rooted).
If you cannot get into android, but when pressing volume up while plugging a usb cable connected to a PC in, your phone is recognized by the PC, you have to flash the stock KDZ file using the R&D test tool that floats around on these forums. It will unroot your device, but it will give you the chance to start clean and unharmed.
For me, I have to send mine in under warranty because now my G2 doesn't even pop up on Windows or Linux.
Click to expand...
Click to collapse
I can boot in android and i am rooted. I instaled twrp manager and it says that there's no compatble recovery with my device samo goes for goomaneger.
I tried to install stock recovery and it got me stuck on lg logo .
I instaled it with this comand dd if=/data/local/tmp/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
I wanted to completely reformat my phone as my phone was buggy with Cyanogen Mod 12, so I formated everything.
The problem is that my PC was not detecting the drivers when in recovery mode, so I couldn't side-load with ADB, and I have no way of getting a .zip on to it.
I tried re-installing the clockwork mod using ODIN but it would just crash the application. I then tried heimdall and that said it installed it (I was hoping that it would fix adb)
Now I can't boot in to the clockwork mode recovery as it just instantly turns the phone off, however I can just boot normally in to the Galaxy S4 logo screen.
When I'm in the logo screen I do have access to ADB, however my phone is unathorised and I have no way to authorise it.
How can I A) fix clockwork recovery so it works again and B) put a zip on the phone or fix ADB detecting my device in recovery?
If you can get into download mode, flash a full stock ROM via Odin and start again
DSA said:
If you can get into download mode, flash a full stock ROM via Odin and start again
Click to expand...
Click to collapse
That worked great, thanks.
no probs, i find it to be a pretty good fall back in case of issues (just annoying reinstalling games etc..)
Hi there! I have a unlocked Nexus 7 that used to be rooted. I did a wipe on it while it was rooted using TWRP and accidentally deleted the OS. Now when I turn my N7 on it just stays on the Google screen with the unlocked logo. I have tried using the Unroot + Flash Stock on Nexus Root Toolkit but I can't find the right driver as it can't connect to fastboot (And i am using the softbricked option). When I try to normally flash something it just goes to the google screen again and stays stuck. I need help with this!
If you can get into TWRP, you can mount a USB thumb drive which has an op system zip file on it. This way you can install a ROM. This worked for me.
Hi,
I was flashing twrp with flashify when I just rebooted in recovery and since that moment my phone is stuch on an infinite bootloop showing me the:
"Recovery booting (recovery is not seandroid enforcing...)"
I'm plugging off the battery for some hours, but when plugged in nothing changed.
My phone has the usb port broken, so I can use it only to charge the battery, but no pc will recognize it.
Since the fact that I can't access download mode, or recovery mode to restore a nandroid backup, It's insane to buy a usb port to change it on the phone and try to link to a pc?
I mean, is there a way to access download mode?
Does JIG usb work in this situation of hard brick?
Any advice?
Thanks for answering.
whychange said:
Hi,
I was flashing twrp with flashify when I just rebooted in recovery and since that moment my phone is stuch on an infinite bootloop showing me the:
"Recovery booting (recovery is not seandroid enforcing...)"
I'm plugging off the battery for some hours, but when plugged in nothing changed.
My phone has the usb port broken, so I can use it only to charge the battery, but no pc will recognize it.
Since the fact that I can't access download mode, or recovery mode to restore a nandroid backup, It's insane to buy a usb port to change it on the phone and try to link to a pc?
I mean, is there a way to access download mode?
Does JIG usb work in this situation of hard brick?
Any advice?
Thanks for answering.
Click to expand...
Click to collapse
You need a working usb to flash a custom recovery or an offical fw. I thought flashify needs root access to work?. Or if you already have root, you could adb to flash twrp but it's too late now.
Try getting into download mode. When it asks to proceed or cancel, choose cancel. Some people are lucky that the phone boot into system again but they need to fix the broken recovery later.
Sent from my SM-G925F
Rosli59564 said:
You need a working usb to flash a custom recovery or an offical fw. I thought flashify needs root access to work?. Or if you already have root, you could adb to flash twrp but it's too late now.
Try getting into download mode. When it asks to proceed or cancel, choose cancel. Some people are lucky that the phone boot into system again but they need to fix the broken recovery later.
Sent from my SM-G925F
Click to expand...
Click to collapse
After 2 months of battery out, finally I got download mode to work, and pressing cancel my phone started.
Thanks.
But now it seems that there is no custom recovery installed, so when i go in custom recovery, the loop starts again.
How may I install again a custom recovery, knowing that:
1) I can't connect to pc, cm 12.1 has a bug, no pc recognizes my phone;
2) rom manager doesn't install any custom recovery on my phone;
3) flashify made my phone in boot loop, and I can't understand what I was wrong 2 months ago.
Thank you, man.
See your other post man .
Flash the tar version of TWRP using Odin. If there is no tar version, you can use Cygwin to convert an img file to a tar file.
hello,
as the title says, my phone bricked while trying to go back to stock rom. this is what i did: i had a well working meticulus custom rom + the meticulus twrp recovery on my phone. thing is i need the google apps and they are not supported on meticulus roms. so i tried to go back to rom, downloaded a stock rom and tried to flash it with dragging it onto my sdcard and installing it from there. so this is when it bricked, the huawei logo appears at the start but it stays and nothing will install.
i tried to reinstall the adb drivers, no success. i can only use the bootloader but i can only flash a recovery, after trying to boot into the recovery via fastboot boot recovery.img it won´t do a thing. also the recovery is stock recovery all of a sudden (erecovery). and there i only have the option to "download latest version and recovery" but that gives an error aswell.
i´ve tried to reinstall drivers, no luck. when i do a fastboot devices it shows my device but when i do adb devices it doesn´t show up anything. so the usb driver is somewhat corrupted. my computer detects the phone when in fastboot only.
i´ve tried to reinstall the drivers a hundred times, i can´t get the phone to work anymore.
i would really appreciate it if someone helps me out.