"Custom binary blocked by FRP, SECURE FAIL: KERNEL"
I've went through a few videos to fix this but they don't work for some strange reason.
(Kies- youtube.com/watch?v=XKJy9VGV1oM )
Using Kies just dosent allow me to click the Start Upgrade button and Odin3 brings up a error,
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
*Presses start*
<OSM> All threads completed. (succeed 0 / failed 0)
Model : SM-G530W
Also, This is not my phone its my cousin's, I have no idea if its rooted or whatever
Related
Hi,
I tried to root my I9500 device but the device left on "downloading" mode.
After a while I reboot it manually and there's no root installed.
Any ideas what did I do wrong?
this is the Odin log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/016> Added!!
thanks
anstriam also
nirfun said:
Hi,
I tried to root my I9500 device but the device left on "downloading" mode.
After a while I reboot it manually and there's no root installed.
Any ideas what did I do wrong?
this is the Odin log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/016> Added!!
thanks
Click to expand...
Click to collapse
Which andriod version you are using, 4.2.2?
If yes, you need Odin 1.85.
Android 4.2.2
I don't know if it is related but I turned off developer options and tried again and it worked like a charm
BTW, I used Odin3-v3.07.exe
nirfun said:
Android 4.2.2
I don't know if it is related but I turned off developer options and tried again and it worked like a charm
BTW, I used Odin3-v3.07.exe
Click to expand...
Click to collapse
I also have no idea what is related.
Anyway, good to know you could make it
Hi, any help would be appreciated.
I'm trying to root my s4 and I'm lost at this point..
I've open odin3 v3.07 selected the pda file and put my phone into odin mode. I then connect my phone to the computer and hit start on odin and instantly after hitting start i get this message <OSM> All threads completed. (succeed 0 / failed 0)
full message is..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
I'm new to rooting and would appreciate any help I can get.
Thanks
odinalmighty said:
Hi, any help would be appreciated.
I'm trying to root my s4 and I'm lost at this point..
I've open odin3 v3.07 selected the pda file and put my phone into odin mode. I then connect my phone to the computer and hit start on odin and instantly after hitting start i get this message <OSM> All threads completed. (succeed 0 / failed 0)
full message is..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltecan-jfltevl-sghi337m.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
I'm new to rooting and would appreciate any help I can get.
Thanks
Click to expand...
Click to collapse
Can you first give us more information about your phone?
Model? I337, or I337m
Baseband? MDK, MDL, MF3, MK2, NB1, NC1?
Also it seems you may be missing the drivers for Odin to function.
*****EDIT*****
I kept at it and decided to restart my computer. The attempt using PrinceComsy and VZW_G930VVRU2APE1 failed. However, using Odin 3.12.3 and G930VVRU4API3_G930VVZW4API3_VZW, I had success!!! I guess the old adage of always restart your computer paid off this time. Thanks.
*****END EDIT*****
Hello all,
I'm newer to this forum. I used the GUIDE: ROOT, install XPOSED, and UNROOT/returning to stock a Galaxy S7 or S7 Edge post (https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039) to root my Verizon Samsung Galaxy S7 in an attempt to recover lost photos and videos (the files just disappeared when the phone got full). I was able to root without issue, including following the recommended next steps and installing xposed. However, now that that adventure is done, I am attempting to unroot to the Verizon stock firmware, all attempts so far have failed.
The original Verizon stock for the S7 was 6.0.1. My first attempt to unroot was using the suggested firmware VZW_G930VVRU2APE1 using Odin3_v3.12_PrinceComsy. I loaded the proper AP, CP, and CSC files in Download mode (ID:COM was blue and showed as 0:[COM6]). After running this, it failed (see log results below). At this point, I was unable to boot the phone (nor could I shut it down) and got a system update failure error screen. I was able to get back to Downloading... and attemped to unroot to G930VVRU4API3_G930VVZW4API3_VZW using Oden 3.12.3. Same errors. I will admit, I attempted adding the BL file on a second try based on another site's recommendations. That failed, too. So now, I'm at a total loss as to what to do, and do not know how to fix this.
Does anyone have any ideas? Thanks much!
Unroot Using Odin 3.12 PrinceComsy to VZW_G930VVRU2APE1 (AP, CP, CSC)
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Unroot Using Odin 3.12.3 to G930VVRU4API3_G930VVZW4API3_VZW (AP, CP, CSC)
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin engine v(ID:3.1203)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Message on Phone Downloading Screen
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G930V
CURRENT BINARY: Samsung Official
SYSTEMSTATUS: Custom
FAP LOCK: ON
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B4(2, 1, 1, 1, 1) K1 S3
SECURE DOWNLOAD : ENABLE
SW REV CHECK FAIL : [system]Fused 3 > Binary 1
Running on Windows 7 64-bit
Did you do anything else differently after restarting your computer? I keep failing trying to unroot -- I've restarted multiple times but still no cigar
One question about your root, did you root when you had 6.0 or 7.0?
I am used to rooting my older phones. Just got this Samsung Galaxy S8 today.
However it is loaded with bloatware from T-mobile. I really want to get rid of it..
Any links to how I can remove this, or add another ROM / Stock Firmware without all the bloatware.
Any advice helps.
Thanks again..
Flash the unlocked U1 firmware. Go to updato.com and search for G950U1. There's TMobile versions that have carrier settings but no bloat. There's tons of guides around so I'm not topping one of those out.
Same thing..
So I did flash firmware from the site you listed, found my T-Mobile firmware..
Still has T-Mobile bloatware and tons more of Samsung apps then before....
Which version would have 0 bloatware??? I just want a clean version with no T-Mobile crap.. =[
Did you wipe it afterwards? Did you flash the G950U1 or G950U firmware? Unlocked FW should have no carrier bloat, but will have removable Samsung apps...
Odin Flash, it will restart in Recovery and apply update. Watch for it to restart. Hold Bixby and Volume Up. Wait for the recovery screen to show up, chose Wipe Data/Reset. Then restart
You should be flashing this one: http://updato.com/firmware-archive-select-model?record=2FE5DAF5D55111E7A5F9FA163EE8F90B
Update & FW
I have downloaded SM-G950U1 XAA Firmware, however when I load it into Odin, It gives me 'Wrong Model' or it fails.
I had to download SM-G950U T-MOBILE Firmware, seemed to be the only one that would work for me. Yet still has all the apps, etc.
Im usually pretty tech savy with this stuff, but this is picking my brain. Not sure why its so difficult to have a 'lite' or 'debloated' version.
theSWARM said:
I have downloaded SM-G950U1 XAA Firmware, however when I load it into Odin, It gives me 'Wrong Model' or it fails.
I had to download SM-G950U T-MOBILE Firmware, seemed to be the only one that would work for me. Yet still has all the apps, etc.
Im usually pretty tech savy with this stuff, but this is picking my brain. Not sure why its so difficult to have a 'lite' or 'debloated' version.
Click to expand...
Click to collapse
1.Which CSC are you using? Home? You should be using Non-Home
2.Use this Odin: https://androidfilehost.com/?fid=24591023225177749 Wipe data/factory reset in recovery after
Not using Home
joe3681 said:
1.Which CSC are you using? Home? You should be using Non-Home
2.Use this Odin: https://androidfilehost.com/?fid=24591023225177749 Wipe data/factory reset in recovery after
Click to expand...
Click to collapse
I downloaded the other Odin you had recommended. This is what I got, I did not use the Home.
Additional Note: The lady at T-Mobile store did the upgrade, so would it be because my Android version is more new than the one I am trying to flash? If so, how could I revert this?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Disreguard
I reseated the phone, and rebooted to download mode, Seems like its writing through Odin now!!!!!
Dude THANKS SOO MUCH! Ill let you know if it worked! YOUR THE MAN!!!
theSWARM said:
I downloaded the other Odin you had recommended. This is what I got, I did not use the Home.
Additional Note: The lady at T-Mobile store did the upgrade, so would it be because my Android version is more new than the one I am trying to flash? If so, how could I revert this?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
theSWARM said:
I reseated the phone, and rebooted to download mode, Seems like its writing through Odin now!!!!!
Dude THANKS SOO MUCH! Ill let you know if it worked! YOUR THE MAN!!!
Click to expand...
Click to collapse
Sometimes you just gotta try different cables or ports. That Odin has never not work for me. Hopefully you got it now!
I have a factory unlocked S8 purchased directly from samsung (XAA FW) and am trying to flash the XM (CCT) FW. I cannot get this to work.
S8 log:
CARRIER: XAA
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
System Status: Official
FRP LOCK: OFF
Warranty Void: 0x0
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B3(1.1.1.1.1) K2 S3
SECURE DOWNLOAD: ENABLE
DID: shows up but don't wish to share
S8 current FW: G950U1UES3CRE2
XM FW i am trying to flash: G950USQU4CRE9
Odin v 3.13.1 (also tried patched version) log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 6752 M
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Following steps from: https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
tritonofg said:
I have a factory unlocked S8 purchased directly from samsung (XAA FW) and am trying to flash the XM (CCT) FW. I cannot get this to work.
S8 log:
CARRIER: XAA
RPMB fuse blown
RPMB PROVISIONED
CURRENT BINARY: Samsung Official
System Status: Official
FRP LOCK: OFF
Warranty Void: 0x0
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: B3(1.1.1.1.1) K2 S3
SECURE DOWNLOAD: ENABLE
DID: shows up but don't wish to share
S8 current FW: G950U1UES3CRE2
XM FW i am trying to flash: G950USQU4CRE9
Odin v 3.13.1 (also tried patched version) log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 6752 M
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Following steps from: https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
Click to expand...
Click to collapse
Thanks for all the info :good: Btw Your thread is being moved to Q&A
But I am XM CCT user:good: It appears your U1 s8 is on the revision 3 bootloader
So you have to goto sam mobile and flash this firmware here https://www.sammobile.com/firmwares/galaxy-s8/SM-G950U/CCT/download/G950USQS3CRE2/220596
which is also bootloader 3 and flash in odin
Now sam mobile is horribly slow so it will take several hours to get it but once you get to this point hollar at me and i will help you out....
TheMadScientist said:
Thanks for all the info :good: Btw Your thread is being moved to Q&A
But I am XM CCT user:good: It appears your U1 s8 is on the revision 3 bootloader
So you have to goto sam mobile and flash this firmware here https://www.sammobile.com/firmwares/galaxy-s8/SM-G950U/CCT/download/G950USQS3CRE2/220596
which is also bootloader 3 and flash in odin
Now sam mobile is horribly slow so it will take several hours to get it but once you get to this point hollar at me and i will help you out....
Click to expand...
Click to collapse
I tried another computer and it worked flawlessly. I was doing everything correctly with the correct binaries just that my Surface Pro 4 was not correctly executing where my old core i3 Samsung laptop (series 5) did the job. Both are on windows 10 don't know what the issue was.
tritonofg said:
I tried another computer and it worked flawlessly. I was doing everything correctly with the correct binaries just that my Surface Pro 4 was not correctly executing where my old core i3 Samsung laptop (series 5) did the job. Both are on windows 10 don't know what the issue was.
Click to expand...
Click to collapse
keep in mind usb 3.0s do not play well with s8 and firmware flashing either so could been part of it