Hi, everybody, I'm a note 4 user from Malaysia, had been using it since it first came to the market. When I bought the 1st note 4 of mine, it's black, and from Malaysia Samsung shop. Later my girl friend got a pink one, from a neighboring country, Singapore. Then we both swap it and using it in Malaysia, with Malaysia's telco Sim cards. Recently, my girl friend note 4 (from Malaysia), got some official update for the OS, by OTA, from 5.0.1 to 5.1.1, and the newest is 6.0.1. She did update to 5.1.1, but stay at it and didn't up to 6.0.1 due to a lot of negative comments about it. On the other hand, the note 4 that I'm using(from Singapore), still stuck with 5.0.1, since the day we swapped. I did on the OTA, but I didn't get any notification about update for my phone. I tried to do manual update checking, by going into setting > system > about device > software update > update now, in case I might have miss the notification while I ran out of range of data, but yet I still a get nothing on it,it just show that the firmware had been update to the latest. At first this doesn't bother me much. But nowadays, my phone started to get wacky, and started to get randomly reboot. I was thinking an update to the firmware might help solve the problem. I did went to samfirmware and check out the newest firmware for my phone and I found that there is an update to 5.1.1 for it, so I try using OTA again to try to update but it failed, the result still say my phone is on the latest update, whereas my phone was still on 5.0.1. I wonder what went wrong with it. Here's my question :
1. Why can't my note 4(from Singapore) do an OTA update? Do I really need a Singapore Sim card to do the update?
2. I know how to flash using Odin, but I heard that many people do a factory reset after flashing new firmware, is this really needed? Cause in the old days, I just do simple flashing and straight forward using the phone(android before note 4) with out doing any factory reset after it.
3. How is the newest 6.0.1 getting along with note 4, need some expert opinions on it.
Sorry for the long story and bad English, I'm trying to keep it short and clear so that you can read them clearly and understand my question, thank you for any answer in advance.
Related
Since I received my N7000 on November 17, 2011 from Mobilecityonline my Galaxy Note won't update. It's running UBKK2 - the CSC is TTT - which a Brazilian CSC.
I've searched every thread and correctly followed every step of the process I've found unsuccessfully, I've tried the manual update and receive "no update available" every time I read about a new firmware release. The CSC is listing only 3 codes; VNO, TTT, and TDR - I installed each one of these CSC codes in an attempt to prompt a software update to no avail. I haven't even gotten the update from January that provided the addition of the Torch & everything that came with it!
Short of rooting my Note is there anything I can do to either change the CSC Code to one that receives updates regularly or manually update the firmware? I thought I'd wait until ICS became available hoping that would correct these issues but I'm slowly getting PO'd that I may not be even to receive ICS.
Plus I didn't/don't see the reason to have rooted by now - I've rooted all of my Android devices from HTC EVO 4G's & 3D's, Nook Color, to Asus Transformers. Is there anything I can do without rooting this beast and will I even receive Ice Cream Sandwich?
I'm begging for help please. I'd sincerely appreciate ANY help and I'm willing to donate to anyone that will help achieve everything I'm missing out on to date.
Thank you in advance,
Jim G.
If keeping it stock is all you want, just download one of the stock firmwares and flash it with odin.
You may have to be a member to see this link but.....
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-N7000&r=6#regiona
^^^
They are the South Amercian firmwares currently out, but the European ones are newer if you want to try those.
Wow that was fast!
Wow! Thank you for the super fast reply. Can I D/L and use any stock firmware, I was hoping to use either the UK or German versions cuz they look like they get updates more often than the rest. If I'm wrong I stand corrected - could you please point out a version to use or am I stuck using the BZ version forever?
Oh Lord I hope not! * Forgive me - I saw you suggested the EU versions after I hurried to reply, my fault! *
Again, Thank You in advance,
Jim G.
Brazil Note.
I too have a Note with a ROM from Brazil. Since this is my first Android phone and I'm a noob so far, what will it take to get mine over to a euro one. Will this brick my phone? What region do you recommend for a US user? I understand that you meant Europe, but there a lot of choices like open, open euro or open germany or europ or german. Any directions or advice is greatly appreciated. Thanks.
flshing a firmware for another region is fine... I offen just update to whereever has the newest update
But if i update to a stock rom from another country without changing csc, will i be able to update via kies whenever a newer csc update gets release online for my country? I got this ideia it wont be possible and will still need to change it again via Odin. It bother me if it wipes my phone each time i update. Still in kka/5 here with unlocked phone...
Sent from my GT-N7000 using XDA
William Haven said:
But if i update to a stock rom from another country without changing csc, will i be able to update via kies whenever a newer csc update gets release online for my country? I got this ideia it wont be possible and will still need to change it again via Odin. It bother me if it wipes my phone each time i update. Still in kka/5 here with unlocked phone...
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
After updating to another regions ROM, You can just Odin back to the original stock ROM if you really wanted to, to restore KIES function for the original configuration.
But to be honest, the only time I ever have, is just for warranty purposes, I don't touch kies in any shape or form, there really is no need.
The way I work is, I like to use the stock ROMs, but rooted etc... So, when I got the phone, I rooted it, put the ClockWorkMod Recovery (CWM) on and now I just update my ROM with the repacked stock versions made to be flashed with CWM. They are exactly the same ROMs but rooted and deodexed, some I "believe" are multi CSC too.
Swyped from my finger, to your face on my Samsung Galaxy Note, using Tapatalk!
Thank you for all the help! I'm choosing to use the open-Germany (DBT) stock ROM cuz I've been keeping track of the ROM that was updated the most. I found it to be the German and UK versions but it seems the open-German edges it out.
I've got it all D/L'd and am actually waiting to get my notebook up and running after a CPU upgrade. Once I receive the thermal paste updating my Beast is the 1st order of business!
It sucks that the UBKK2 firmware never allowed any kind of an update, it makes me wonder if I'd even get the ICS update when it's released on March 15 or shortly thereafter. Of course that's according to the rumor mill and I'm simply referring to that since the SGSII's received their ICS earlier today according to SanFirnware.
So who knows? Again, I thank everyone fir their help and input.
Jim G.
Direct from my Samsung Galaxy Note GT-N7000
Update for Galaxy Note 8.0 LTE (GT-N5120) are out today
Model: GT-N5120
Country: United Kingdom
Version: Android 4.2.2
Changelist: 1210063
Build date: Thu, 01 Aug 2013 12:21:19 +0000
Product Code: BTU
PDA: N5120XXCMH1
CSC: N5120BTUCMH1
MODEM: N5120XXCMG7
Get it Here
Changelist is the same as the former UK 4.2.2 release, so no idea what changed really.
Will download, update and report back
Slipurson said:
Update for Galaxy Note 8.0 LTE (GT-N5120) are out today
Model: GT-N5120
Country: United Kingdom
Version: Android 4.2.2
Changelist: 1210063
Build date: Thu, 01 Aug 2013 12:21:19 +0000
Product Code: BTU
PDA: N5120XXCMH1
CSC: N5120BTUCMH1
MODEM: N5120XXCMG7
Get it Here
Changelist is the same as the former UK 4.2.2 release, so no idea what changed really.
Will download, update and report back
Click to expand...
Click to collapse
Any update on what the differance is over the previous release?
If this ROM causes the S-Pen to have an offset, please let us know here:
4.2.2 Update S-Pen Inaccuracy Thread
KTM690 said:
Any update on what the differance is over the previous release?
Click to expand...
Click to collapse
I cant find any differences at all actually, the offset for the S-Pen is there still and everything else works just as it did with the previous 4.2.2
CafeKampuchia said:
If this ROM causes the S-Pen to have an offset, please let us know here:
4.2.2 Update S-Pen Inaccuracy Thread
Click to expand...
Click to collapse
Ill post my findings in the thread.
I am assuming you are talking about the browser bug? That was an issue with chrome's zoom being inaccurate on, frankly, every Galaxy Note up until now. They fixed it recently.
Sent from my SAMSUNG-SGH-I467 using xda premium
'H+' vs 'H' Icon
Hi
Just flashed this ROM on my HK Note N5120 LTE (CSC Was TGY). The device came from Panamoz.com as I was struggling to buy the LTE version sim free in the UK for reasonable money, and Kies was not offering to upgrade the stock 4.1.2 firmware to 4.2.2.
Used this method: http://forum.xda-developers.com/showpost.php?p=44241666&postcount=4
All worked fine, Answered 'No' when asked about making CWM recovery permanent. The CSC became BTU (UK) after the flash. CWM recovery was replaced with stock during the flash.
Since I am in the UK, I flashed the modem files that came with the ROM, and still get 4G. I have the same issue as everyone else regarding the S-Pen offset - probably not bad enough to flash back to 4.1.2 for me, but hopefully Samsung will fix.
My main issue is that compared to 4.1.2, I hardly ever see the device show 'H+', only 'H'. I travel the same route on the train daily, and now, I see 'H+' 10% of the time rather than 90% of the time. My other device on the same network still shows H+.
Maybe others have seen my 'H' vs 'H+' issue?
Does this device support DC-HSPA?? I recall that with the S3 and Note2, one gained DC-HSPA+42 (so called 3.75G theoretical max 42Mbps), when one bought the LTE version of the phone. The non LTE versions only had HSPA+21. Reason I am asking is I am wondering if the 'H+' now only shows for DC-HSPA rather than for HSPA+21 ??
Tempted to flash the old modem files again, see if my H+ returns to normal operation - and of course to see if its any faster.
My device is still rooted with the flash counter == 2, and It does still appear to be recognized by kies when connected to the PC. Time will tell whether I will get updates via Kies still. If not then maybe I will need to use Triangle to reset the flash counter, and then do a full unroot.
Nigel
veletron said:
Hi
Just flashed this ROM on my HK Note N5120 LTE (CSC Was TGY). The device came from Panamoz.com as I was struggling to buy the LTE version sim free in the UK for reasonable money, and Kies was not offering to upgrade the stock 4.1.2 firmware to 4.2.2.
Used this method: http://forum.xda-developers.com/showpost.php?p=44241666&postcount=4
All worked fine, Answered 'No' when asked about making CWM recovery permanent. The CSC became BTU (UK) after the flash. CWM recovery was replaced with stock during the flash.
Since I am in the UK, I flashed the modem files that came with the ROM, and still get 4G. I have the same issue as everyone else regarding the S-Pen offset - probably not bad enough to flash back to 4.1.2 for me, but hopefully Samsung will fix.
My main issue is that compared to 4.1.2, I hardly ever see the device show 'H+', only 'H'. I travel the same route on the train daily, and now, I see 'H+' 10% of the time rather than 90% of the time. My other device on the same network still shows H+.
Maybe others have seen my 'H' vs 'H+' issue?
Does this device support DC-HSPA?? I recall that with the S3 and Note2, one gained DC-HSPA+42 (so called 3.75G theoretical max 42Mbps), when one bought the LTE version of the phone. The non LTE versions only had HSPA+21. Reason I am asking is I am wondering if the 'H+' now only shows for DC-HSPA rather than for HSPA+21 ??
Tempted to flash the old modem files again, see if my H+ returns to normal operation - and of course to see if its any faster.
My device is still rooted with the flash counter == 2, and It does still appear to be recognized by kies when connected to the PC. Time will tell whether I will get updates via Kies still. If not then maybe I will need to use Triangle to reset the flash counter, and then do a full unroot.
Nigel
Click to expand...
Click to collapse
Just got mine from the same place. Your post has helped me with some questions I had. Thanks.:good:
No OTA For me
So, the next stage was to run Triangle away, which worked fine (counter reset to 'No'). Just be brave and accept the big red warning.
Following on from that, I unrooted using the unroot option in Super User app that was installed by chainfire's 'auto root'.
This worked too, and I confirmed root gone. After a reboot, I reconnected to Kies, to check that it recognized the firmware on the device as the 'latest'. It was.
I then tried the 'Software Update' option under Settings->about device, unfortunately, this no longer works it just says 'connecting to server' forever and eventually comes up with a message: 'your device has been modified, software updates are not available'. So No OTA for me.
Any idea how to get OTA working again??
Here is the screenshot from the downloading screen, showing 'official' for all the firmwares on the device. Could it have something to do with the CSC? (TGY on 4.1.2 and BTU on 4.2.2) ?
http://photos.veletron.com/index.php/album151/P1070688
If I goto Settings-->About Device-->Status, and wait an age while the 'Device Status' field updates, it reports 'custom'. I guess this is why, but how come given that the 'download' screen reports as per the above screen shot?!
Prior to running Triangle Away, and unrooting, the OTA check on the device, span for a while before reporting no new updates available.
Nigel
veletron said:
Hi
Just flashed this ROM on my HK Note N5120 LTE (CSC Was TGY). The device came from Panamoz.com as I was struggling to buy the LTE version sim free in the UK for reasonable money, and Kies was not offering to upgrade the stock 4.1.2 firmware to 4.2.2.
Used this method: http://forum.xda-developers.com/showpost.php?p=44241666&postcount=4
All worked fine, Answered 'No' when asked about making CWM recovery permanent. The CSC became BTU (UK) after the flash. CWM recovery was replaced with stock during the flash.
Since I am in the UK, I flashed the modem files that came with the ROM, and still get 4G. I have the same issue as everyone else regarding the S-Pen offset - probably not bad enough to flash back to 4.1.2 for me, but hopefully Samsung will fix.
My main issue is that compared to 4.1.2, I hardly ever see the device show 'H+', only 'H'. I travel the same route on the train daily, and now, I see 'H+' 10% of the time rather than 90% of the time. My other device on the same network still shows H+.
Maybe others have seen my 'H' vs 'H+' issue?
Does this device support DC-HSPA?? I recall that with the S3 and Note2, one gained DC-HSPA+42 (so called 3.75G theoretical max 42Mbps), when one bought the LTE version of the phone. The non LTE versions only had HSPA+21. Reason I am asking is I am wondering if the 'H+' now only shows for DC-HSPA rather than for HSPA+21 ??
Tempted to flash the old modem files again, see if my H+ returns to normal operation - and of course to see if its any faster.
My device is still rooted with the flash counter == 2, and It does still appear to be recognized by kies when connected to the PC. Time will tell whether I will get updates via Kies still. If not then maybe I will need to use Triangle to reset the flash counter, and then do a full unroot.
Nigel
Click to expand...
Click to collapse
I can not say anything about the OTAupdates since I never use Kies to update, but as for the modem, I am running the "old" 4.1.2 modem and it is working well for me, tho I have not compared my note now and before in regards to how ofteni see H+ or just H, most often I see the 4G icon where I usually hang out.
But I would try the 4.1.2 modem for your region and see if it changes anything.
Sent from Galaxy no. N5120 via the LTE-network
Got mine updated to 4.2.2 yesterday.
Not sure why but my battery life seemed to have taken a hit since upgrading.
On 4.1.2 i used to be able to last a day easily with about 30 - 40% left each day (7am till 9pm). after updating to 4.2.2 I am down to 30% in 5 hrs. Tab gets hotter too. Anyone experience the same issue?
I am back on 4.1.2 for now. Everything's good again.
thanks man for update.
Just for info
After the update to 4.2.2 Mh1 by flashing the firmware here, I never got OTA again (says device status custom). Stock rom and flash counter zero. I was however able to update to MH2 via kies. I am still told device status custom!
No difference for me re pen pointer offset on MH1/MH2 not sure Samsung will ever bother to fix this.
My device now BTU but it started as Hong Kong. I suspect this is why it reckons it's "custom".
Nigel
veletron said:
Just for info
After the update to 4.2.2 Mh1 by flashing the firmware here, I never got OTA again (says device status custom). Stock rom and flash counter zero. I was however able to update to MH2 via kies. I am still told device status custom!
No difference for me re pen pointer offset on MH1/MH2 not sure Samsung will ever bother to fix this.
My device now BTU but it started as Hong Kong. I suspect this is why it reckons it's "custom".
Nigel
Click to expand...
Click to collapse
I have the same device but not the same problem. I also updated to MH2 via Odin and my status is normal. The offset for me is much better than previous, and I have no problem with the battery lasting more than a day using WiFi and push mail along with the normal use. However although recognized by Kies it would not update, I recon because of the CSC.
craylim said:
Not sure why but my battery life seemed to have taken a hit since upgrading.
On 4.1.2 i used to be able to last a day easily with about 30 - 40% left each day (7am till 9pm). after updating to 4.2.2 I am down to 30% in 5 hrs. Tab gets hotter too. Anyone experience the same issue?
I am back on 4.1.2 for now. Everything's good again.
Click to expand...
Click to collapse
Sent from my GT-N5120 using XDA Premium HD app
Battery seem to drain faster since I upgraded to 4.2.2
Multi Window
Hey,
I've update my rom on my 5120 to the MH2 and still having problem with multi window greyed out in the setting>display
Has anybody else have this problem?
Is they any way to fix it?
I upgraded the rom using the odin version 1.85 had the tick in auto reboot and F. Rest time and I ticked PDA and put the md5 file on the pda line where I placed the tick is that all correct or should I've used a different version?
Please can anybody help me.
Thanks
Gigino
THANK YOU! THANK YOU! THAAAAAAAANK YOOOOOOOU! (if it didn't look and/or feel weird, I'd kiss you! *LOL* I wouldn't it was a joke)
BUT you saved my stupid self from self pity. You see, I didn't realize - until too late - that there were 3 versions of this device, and attempted to install a 5110 ROM. That caused me 5 DAYS of hell until I cam across this, and voila! I got my tablet back. So again - TANK YOU THANK YOU THANK YOU!
One Note: Baseband I467MVLAMG2 and Build Number: JDQ39.N5120XXCMH2 (not 1)
_Allan_ said:
THANK YOU! THANK YOU! THAAAAAAAANK YOOOOOOOU! (if it didn't look and/or feel weird, I'd kiss you! *LOL* I wouldn't it was a joke)
BUT you saved my stupid self from self pity. You see, I didn't realize - until too late - that there were 3 versions of this device, and attempted to install a 5110 ROM. That caused me 5 DAYS of hell until I cam across this, and voila! I got my tablet back. So again - TANK YOU THANK YOU THANK YOU!
One Note: Baseband I467MVLAMG2 and Build Number: JDQ39.N5120XXCMH2 (not 1)
Click to expand...
Click to collapse
Great post. I feel your joy
THere is a newer version. Does anyone know how we can go from JDQ39.N5120XXCMH2 to the new JDQ39.N5120XXCMI2 version?
My phone also says custom like Nigels problem above, I am having same problem that he was having when he first went to 4.2.2 from 4.2.1... I'm currently on 4.2.2 trying to go to the new CMI2.
CCJ22 said:
THere is a newer version. Does anyone know how we can go from JDQ39.N5120XXCMH2 to the new JDQ39.N5120XXCMI2 version?
My phone also says custom like Nigels problem above, I am having same problem.
Click to expand...
Click to collapse
I downloaded the CMI2 version from samsmobile site. It was a KIES file extracted the file and using mobile odin flashed it to my device. All working fine.:good:
Hi
Picked up an S5 after years of iPhones, Which i bought from the three store in the UK.
After installing a few apps i started to get error 24 installing netflix. I didnt fancy doing a factory reset so i routed my phone to use a root browser to remove the temp files which resolved my issue (but of course i still had to do a factory reset) However i didn't realise that android confirms if its official or not and then doesn't receive OTA updates.
I'm not much into messing with releases these days so i downloaded the stock UK firmware (NCE) from sammobile and it now says official after flashing it.
However i notice that there is an OTA update out today (NC2) which i'm not getting when i check for updates (the message says latest update installed).
Is this simply a case of the update not having rolled out to everyone yet or does the update checker use the serial number of my phone to check that it should be on the H3G UK firmware rather than the stock UK firmware? Kies also states the firmware is up to date.
Thanks for any advice
Scottw1975 said:
Hi
Picked up an S5 after years of iPhones, Which i bought from the three store in the UK.
After installing a few apps i started to get error 24 installing netflix. I didnt fancy doing a factory reset so i routed my phone to use a root browser to remove the temp files which resolved my issue (but of course i still had to do a factory reset) However i didn't realise that android confirms if its official or not and then doesn't receive OTA updates.
I'm not much into messing with releases these days so i downloaded the stock UK firmware (NCE) from sammobile and it now says official after flashing it.
However i notice that there is an OTA update out today (NC2) which i'm not getting when i check for updates (the message says latest update installed).
Is this simply a case of the update not having rolled out to everyone yet or does the update checker use the serial number of my phone to check that it should be on the H3G UK firmware rather than the stock UK firmware? Kies also states the firmware is up to date.
Thanks for any advice
Click to expand...
Click to collapse
Rather than waiting for ota would I just be as well flashing the new stock uk firmware through Odin?
Just for the purpose of tracking the rolling out process in the north America region, let's try collecting some date information when you receive the rollout. The process of this upgrade could become a helpful guideline for future upgrade events in the region! Models L04 and L14 might be involved. Let's also comment on your state, wireless service provider, if you are in the beta group and when you got the phone to see if anything is correlated. Please take a minute to fill out the form:https://docs.google.com/spreadsheets/d/1XULbGwxpO0s_RH9EzbvWjLP48MNCz7vkolbT0TiMf7s/edit?usp=sharing
Thank you!
Now, on the official Honor_USA social account, https://twitter.com/Honor_USA, N is coming on Feb 11th. Period.
Update: from Rox_honor, it's officially released on Feb 10th in the US. Some people have had this update already.
To force the update, you can check the method posted on Page 2, #16: https://forum.xda-developers.com/showpost.php?p=70992090&postcount=16.
Reserve for updating statistics, if possible. Again, the Google Spreadsheet to fill out is https://docs.google.com/spreadsheets/d/1XULbGwxpO0s_RH9EzbvWjLP48MNCz7vkolbT0TiMf7s/edit?usp=sharing
Feel free to add more columns if you think they are helpful.
So far it seems that only T-Mobile users are getting the update. Just tried to update my Mom's phone, we are on Cricket (AT&T) and there was no update for her. Tried putting it on airplane and restarting but still nothing. I'll probably try again tomorrow.
chris23445 said:
So far it seems that only T-Mobile users are getting the update. Just tried to update my Mom's phone, we are on Cricket (AT&T) and there was no update for her. Tried putting it on airplane and restarting but still nothing. I'll probably try again tomorrow.
Click to expand...
Click to collapse
There is one entry reporting received the update while on Straight Talk. We need to have more data in order to figure out the rollout sequence. GOOD LUCK!
i purchased the Unlocked Honor 8 from US (amazon). But I'm an indian user and I'm using it with an indian carrier . will i get the update as the other north american devices or do i have to wait longer
Did not get the update (FRD - L04)
But I forgot whether or not the L04 is international or US (i live in the US though)
yeah i havent gotten it either still says no updates available
I haven't received the update either on L04. I read on the other thread that it rolls out in small batches.
Edit: Here's the post: https://forum.xda-developers.com/showpost.php?p=70964112&postcount=392
Nothing on L04 AT&T yet. Purchased from NewEgg and first activated in December.
Got it 3 weeks ago. L04 from b&h.
Bought it unlocked at Frys a week ago and received the update yesterday. I just want to caution all rooted and unlocked users! I received the update yesterday and upgraded it like a fool. I cant get into twrp recovery and the stock recovery seems to be broken. I even installed a newer twrp thru fastboot but im still not able to go into recovery. Im looking through all the forums but no one seems to have this problems yet. Im still waiting on some help if anyone has a solution. So please be aware before updating. Hopefully Im the only one with this problem.
yomomsbigpimp said:
Bought it unlocked at Frys a week ago and received the update yesterday. I just want to caution all rooted and unlocked users! I received the update yesterday and upgraded it like a fool. I cant get into twrp recovery and the stock recovery seems to be broken. I even installed a newer twrp thru fastboot but im still not able to go into recovery. Im looking through all the forums but no one seems to have this problems yet. Im still waiting on some help if anyone has a solution. So please be aware before updating. Hopefully Im the only one with this problem.
Click to expand...
Click to collapse
Ahh, I was an idiot and had the same thing.
What happened is that I was rooted, and installed via Charles app, and it bugged out.
The reason for that is that TWRP can't install the stock ROM.
You need to get into fastboot, and reflash the stock recovery, and use it to dload the emui 4.1 file. Make sure you get the full package version.
After that it will be all wiped. You might run into a few errors but let the recovery do its thing.
You'll eventually be able to boot into the OS and then run the update normally.
I want to root my honor 8 on nougat, but I'm waiting for a patch from Huawei first because of all the bugs, just because of this.
Also I don't think rooting the honour 8 on nougat works that we'll yet, hopefully someone comes up with a method that doesn't suck so hard.
Hopefully they'll do it quickly.
Do you mind pointing me to the right direction to find those files? stock recovery and the 4.1.
Ive seen the rollback files... is that what you're talking about?
yomomsbigpimp said:
Do you mind pointing me to the right direction to find those files? stock recovery and the 4.1.
Ive seen the rollback files... is that what you're talking about?
Click to expand...
Click to collapse
I used the firmware finder tool for it. You can get it for Windows. It's somewhere around the forum, but you can probably Google it.
Once you get the full package you can extract the recovery.img from it.
Unlocked FRD-L04 bought from Amazon. Living in Argentina. Got update yesterday. Really happy with it.
Folks, if you are impatient, you can use the Firmware Finder to send the Firmware B360 (I am using the Jan 3 one) to your Updater for a full package update. More information can be found at https://forum.xda-developers.com/honor-8/how-to/news-huawei-firmware-finder-team-mt-t3550882
A few notes here from my personal experience:
1. Once you set up the proxy from the Finder's proxy app which should be downloaded after you enabled the "send firmware to updater" (check notification afterward), you then click on the latest firmware # and "send firmware to updater".
2. On the Setting/Updater, click the menu and use "Download full update package", which should direct you to a 2.27Gb package (not the 1.28Gb package, or you will not be able to login!) and click on the "Quick update" button. You may need to wait for a while to see this option. Up to now, you may not be able to download anything yet.
3. Go back to the wifi setting and turn on proxy setting to "None" again and reconnect with the wifi network. Now you should pause the Updater and then resume it. You should now be able to download the full package and install it.
4. After all the update process, it could be helpful to charge your phone without the screen turning on. This is told to be useful to optimize the battery performance immediately after the update. The phone might be slow in a couple of hours as optimizations are going on in the background. But everything will become normal afterward
Good luck!
bought L04 from newegg using it in Pakistan no update for me as of yet
This is all bulls*it. Same update we got in january, and by the way, it's buggy.
L04 here, bought from Amazon about a month ago. Running on T-Mobile US. Still no update yet.
Is there any way to change the white notification background? I prefer the old color scheme, Mich easier on the eyes at night.
Sent from my BTV-W09 using Tapatalk
Edit: Received update on US single SIM L04 on Straight Talk, ATT towers.
Hi All
Hoping you can help as i am struggling to understand how this all works with this manufacturer. I got this tablet yesterday and love it so far ... upon starting the tablet i was greeted with an update notification that i initially figured was for 7.0 - turns out this was a patch for 6.0.
This is all great except i noticed in another thread that someone with the same version and based in the uk received the update. Mine wont find it. I tried the PC software to see if this would work as it used to on other manufacturers (Sony for example) but it said i was up to date.
I would prefer to update the official way if possible (not my first BBQ, have had more android tablets than you can poke a stick at - have resorted to all sorts of ways to get the next software before)
Any ideas anyone ? least possible effort as i don't want to corrupt this awesome piece of kit !
From what I can tell they roll it out in waves based on the device's IMEI. I also haven't received it in Italy when some people in neighbouring countries have. I guess all you can do is wait. By the way, corrupting the device is not that easy, if you want to test Nougat right now, you can get it using Firmware Finder, then you can roll back to the regular version using a rollback package you can find on Huawei's website. Worst case scenario, you will have to factory reset, but it won't be a big deal I guess since you just got it. I was able to roll back from a failed flash of Nougat just fine, then reflashed the correct version of Nougat and used it for a while, then rolled back again because I heard the official ota is coming, and it always worked just fine.
Ok great thanks for confirming. i almost went for the galaxytab s2 again (my wife swindled me out of my old one ! ) but glad i didn't - this one runs better on 6.0 than the s2 on 7.0 i noticed.