Database Users

Download mode doesn't working, but system and recovery works fine.

Hi,
I went back to stock by using LG Mobile Support Tool application (Repair Software section). It flashed correctly (D802TR20c) and I started to use it.
After a while I wanted to install 20f kdz version via Flashtool. I booted phone to download mode, connected to PC. It starts upgrading but fails at %4. There was nothing moved on phone screen, it's still says samethings. COM port should wrote on phone screen when flashing started but it doesn't.
I tried repair software section on LG Mobile Support Tool, It downloaded right firmware for my phone and started to upgrading but it fails at %4 too.
I tried TOT flashing, I did it before succesfully. But now, when I press start button, it stucks at READY.
Then I downgraded bootloader and download mode via AutoREC application, but I have still same problem. I tried it other computers too.
I can still boot to recovery and system without any problem. I can boot to download mode too, but there's something blocking flash progress.
What I should do?
Thanks in advance.

I'm still stuck. It seems that nobody encountered with this problem.
If I'll solve this, I'll write the solution.

Problem Going back to stock !

HI There ! I own a LG F320L for sometime now. It came with Kitkat 4.4.2 installed and then i flashed it with CloudyG2 rom and have been using it ever since. For the past 1 month I have this strange touch screen issue with erratic behaviour and phantom touches. It has been addressed as software related issue and going back to stock has fixed some of the users problem.
Now to the main issue, I followed the tutorial of LG FLASH TOOL Method upto the point. Installed drivers and have downloaded the KDZ for stock kitkat but when I enter the download mode and LG flash tool begins to start it doesnt even verify my phone. It keeps stopping at 2% software extraction (sometimes 4%) and then a dialog appears saying Disconnect phone and remove battery and then again put the battery in and connect your phone and try. I have been trying it for many hours but it doesnt make any difference. I have used unrooter tool to unroot my phone for download mode. I have also tried the TOT method for going back to stock but no success. Whenever I plug in my device it appears in device manager but it is not recognized by FLash tool still. Please help me. I have TWRP 2.8.4.0 Recovery installed.
I am running windows 8.1 X64. The drivers install with no problem.
P.S I have searched all the threads regarding flash tool problems and download mode recognition. I didnt find anything helpful.

Mode download doesn't work

Hello,
I want upgrade my LG G2 with a new rom 5.xX
This phone have only the operator update. No custom, no trwp, nothing...
I installed drivers and when i want access to download mode. I can't. I use the good proccess with vol up then plug usb cable always with vol up presses.
follow this procces after a little moment my phone show me battery logo charging.
So i can't access to download mode.
I would use this process
t was NOT bricked. I finally tried playing around with the LG Mobile Support Tool (B2CAppSetup.exe). Of course it detected that my phone already had the latest firmware from T-Mobile, but then I clicked Options>Upgrade Recovery.
It downloaded for a while then I noticed it had put my phone into download mode (it said "Rooted" in red letters at the bottom). Then it flashed the same firmware over and I immediately tested, it entered download mode right away. But I didn't end up needing that as Stumproot was able to brute force it now after the recovery flash.
Anyway, I couldn't find an answer anywhere else. Most results also have a bricked phone, but that wasn't my issue. This solved my problem and maybe it could work for others.
but it's impossible for me to install B2appsetup on my pc the installation begin then stop after 5s then nothing.
I have Win 10.
Do you have a solution for me , please??

poupinej said:
Hello,
I want upgrade my LG G2 with a new rom 5.xX
This phone have only the operator update. No custom, no trwp, nothing...
I installed drivers and when i want access to download mode. I can't. I use the good proccess with vol up then plug usb cable always with vol up presses.
follow this procces after a little moment my phone show me battery logo charging.
So i can't access to download mode.
I would use this process
t was NOT bricked. I finally tried playing around with the LG Mobile Support Tool (B2CAppSetup.exe). Of course it detected that my phone already had the latest firmware from T-Mobile, but then I clicked Options>Upgrade Recovery.
It downloaded for a while then I noticed it had put my phone into download mode (it said "Rooted" in red letters at the bottom). Then it flashed the same firmware over and I immediately tested, it entered download mode right away. But I didn't end up needing that as Stumproot was able to brute force it now after the recovery flash.
Anyway, I couldn't find an answer anywhere else. Most results also have a bricked phone, but that wasn't my issue. This solved my problem and maybe it could work for others.
but it's impossible for me to install B2appsetup on my pc the installation begin then stop after 5s then nothing.
I have Win 10.
Do you have a solution for me , please??
Click to expand...
Click to collapse
so you have tmobile. right?
and only 5.0.2 lillipop is availabe stock.. if you go asop or cm the theres 5.1.1- 6.0
then do what the guide says to do here.
http://forum.xda-developers.com/showthread.php?t=2432476

I can't do that because I don't have the download mode

poupinej said:
I can't do that because I don't have the download mode
Click to expand...
Click to collapse
try the skr tools , with the nuke download . read as i havent used it but i read that might bring download. the other way is to short circuit the motherboard.. but ill go read skr tools if i was you.

Black screen, no DL mode, no boot, just a brick - device without root

Hello guys!
Unfortunately I have managed to full brick my phone which has worked without any issues for more then 3 years.
My story:
1. Phone started to have random restarts, basicaly, when phone lagged little bit - it restarted phone.
2. When I did manual restart, I got into bootloop and could not get out
3. With a heavy heart I did a factory reset. - Problem with random restarts ontinued together with random bootloops.
4. Did maybe 5 more factory resets, nothing happened.
5. Found a tutorial to flash new firmware.I was on 5.0.2 D802 30d so I used same. (PC suite could not find my phone and LG support tool always freezed on SW install)
6. I used LG Flash tool with normal flash. - used *.kdz which I have downloaded via LG support tool - checked size with dl from source from xda and they were same so i used it.)
7. All success, but device keep restarting - i think no bootloop anymore.
8. I did full flash again with LG flash tool so have a clean install and hopefully fix everything.
9. Suddenly mid-install my phone auto-disconnected from laptop and even with Retry attemps I wasnt able to get it running again. Then my phone restarted itself and that was it.
Now I cannot go to recovery mode, I cannot go to Download mode, all I see is black screen (turns some light on little bit underneath but no data visible).
Also when connect to my Windows 10 laptop multiple discs trying to load and trying to format disk. (one of them contains folder image with some files inside).
I dont have root, I dont have any other tools installed on my phone, just a normal user.
I tried to download adb but i dont understand it much, and also it cannot find my device.
Is there any way how to still fix my phone or is it completely lost
If so, I please you for a dummies step-by-step list .
Thank you so much in advance. :crying:

So good news,
I managed to load img back with dd application.
My Download mode together with factory reset is working.
I have tried to flash it with LGUP and even with some accused usb disconnections I probably managed to flash new lollipop to my phone.
Now it is optimalizing apps to load android correctly. Only issue I have is low battery, it always drains it too quickly so it cannot load properly.
Any idea how to charge the battery? Every time I connect phone with usb cable it starts up into boot, possible bootloop (cannot say if it is because of low battery or real bootloop)
Thanks

Dude try to install crdroid 7.1.2 nougat rom of d802 this will fix your battery problem
root it and install TWRP with srktools 2.0
this is best way to root G2 5.0.1 lolipop
you can also use LG One Click Root to obtain root then don't update su binary and install Autorec of you model to get twrp

nudget said:
Hello guys!
Unfortunately I have managed to full brick my phone which has worked without any issues for more then 3 years.
My story:
1. Phone started to have random restarts, basicaly, when phone lagged little bit - it restarted phone.
2. When I did manual restart, I got into bootloop and could not get out
3. With a heavy heart I did a factory reset. - Problem with random restarts ontinued together with random bootloops.
4. Did maybe 5 more factory resets, nothing happened.
5. Found a tutorial to flash new firmware.I was on 5.0.2 D802 30d so I used same. (PC suite could not find my phone and LG support tool always freezed on SW install)
6. I used LG Flash tool with normal flash. - used *.kdz which I have downloaded via LG support tool - checked size with dl from source from xda and they were same so i used it.)
7. All success, but device keep restarting - i think no bootloop anymore.
8. I did full flash again with LG flash tool so have a clean install and hopefully fix everything.
9. Suddenly mid-install my phone auto-disconnected from laptop and even with Retry attemps I wasnt able to get it running again. Then my phone restarted itself and that was it.
Now I cannot go to recovery mode, I cannot go to Download mode, all I see is black screen (turns some light on little bit underneath but no data visible).
Also when connect to my Windows 10 laptop multiple discs trying to load and trying to format disk. (one of them contains folder image with some files inside).
I dont have root, I dont have any other tools installed on my phone, just a normal user.
I tried to download adb but i dont understand it much, and also it cannot find my device.
Is there any way how to still fix my phone or is it completely lost
If so, I please you for a dummies step-by-step list .
Thank you so much in advance. :crying:
Click to expand...
Click to collapse
You can fix using qhslb 2.0
You can find video on YouTube.

Stuck in rescue mode after tried flashing stock firmware

Good evening! I hope you can help me.
I flashed LineageOS 14.1, but I wanted to go back to EMUI. I made all the wipes and tried to flash different stock firmwares through a forced update (volume buttons + power button), but it never worked. At that point, I read about a guy in this forum who suggested to create a flashable zip with Huawei Update Extractor: I followed the suggestion and tried to flash it with TWRP. No error was given, but when I tried to restart, TWRP told me I had no OS installed. I thought it was strange, so I tried to restart anyway. That's when I got in rescue mode. I can't get into the recovery and I can't use fastboot. What rescue mode shows me is:
RESCUE MODE
Attention!
Please update system again
Update User Guide:
*link*
*android avatar*
Error!
Func NO: 10 (boot image)
Error NO: 2 (load failed!)
Pressing the three buttons, I'm able to force an update. The problem is I can't find a firmware that doesn't get rejected. With Lollipop firmwares, it starts to install, but it fails at 12%. With Marshmallow ones, the installation process doesn't even start.
What can I do to make it work again? I'm very sad because this phone was gifted to me a couple of days ago and I already messed it up. I don't even know how to turn it off.
What can I do to get in fastboot mode? At that point, what should I do to flash the stock firmware? Or maybe do I need to find the first stock firmware ever installed into this phone to make the forced update work?
Please, I need help. Thank you in advance!
P.S. The phone's model is ALE-L21. I live in Italy, so I assume it's a European version.

Did you managed to fix this?

Jhon_Locke said:
Did you managed to fix this?
Click to expand...
Click to collapse
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㄰㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!

ErikChimello said:
Not yet, but I'm working on it. I found out that the device is recognized by my PC if I follow these steps:
1. Connect the phone to the PC and wait for it to go in rescue mode;
2. Wait until the notification LED stops to blink;
3. Disconnect the USB cable;
4. Press volume - and power button;
5. Reconnect the cable.
At that point, the screen turns black and the phone is recognized as "㄰㌲㔴㜶㤸". I installed the drivers and now it's recognized as "HUAWEI USB COM 1.0". I should be able to reflash the partitions and make my phone work again, but I'm still trying to understand how to do it correctly.
Any help is appreciated!
Click to expand...
Click to collapse
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).

Jhon_Locke said:
fastboot detects your device when you plug it into your computer?
I mean, if you run "fastboot devices" it shows your phone?
I've had this same problem but with an P8 Lite 2017, after flashing some ROM that supposedly was the stock one and trying to flash recovery I ended up with my phone bootlooping into rescue mode, I was able to "bypass" this thing rebooting my phone like crazy, seriously like after 20 reboot it finally booted into the damn ROM and I never touched the phone again. Sometimes when the phone ran out of battery and tried to power it on the phone booted into rescue mode and again after some reboots it booted to Android but now I want to install a custom ROM or at the very least root this damn phone so that's why I'm asking you if you have solved this, if you do then probably if I follow the same steps I would be able to fix that screen, hopefully.
If you are able to flash something start with flashing all recoveries your update.app has, maybe that's the problem (at least in my phone it is).
Click to expand...
Click to collapse
No, it doesn't show anything if I write that command...
I guess mine won't ever boot into the rom because it seems like there's no system installed. I made some researches and found out there are some softwares that let you reflash the partitions IF the phone is recognized as "HUAWEI USB COM 1.0". I'm still trying to figure out how to do it correctly though. I feel like if I do something wrong, then my phone won't probably turn on again.
In your case, you should be able to flash a custom rom without any issue. You just have to be very careful and inform you as much as you can: I don't want your phone to end up like mine?. Anyway, it seems pretty hard to go back to the stock rom, so think about it before you flash a custom rom. Also, make a Nandroid Backup is very important.