MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM.
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. Supersu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. GUI hangs if you press anything during flashing. So avoid touching anything once flash button pressed.{fixed in next update}
2. You tell :cyclops:
Features:
1. Flashing stock rom on any Motorola Device (Any model).
2. Root through superuse.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool v1.1, Tool/Utility for the Moto G
Contributors
hard91
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-12
Created 2016-06-12
Last Updated 2016-06-16
Downloads:
Go to this Link:
CLICK ON ME
Reserved for Tutorials
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
Reserved
screenshots
adb drivers download button not working.
celikbasm said:
adb drivers download button not working.
Click to expand...
Click to collapse
All the buttons are working
As repoted by other users
Sent from my CP8298_I00 using XDA-Developers mobile app
hard91 said:
All the buttons are working
As repoted by other users
Sent from my CP8298_I00 using XDA-Developers mobile app
Click to expand...
Click to collapse
i couldn't install adb/fastboot drivers with your tool. I've clicked button in Drivers section, but nothing happened. i don't know whats wrong with it. As a workaround, can you give me direct link of drivers and installation path? I will manually install drivers to program's needed path and try to make it work.
celikbasm said:
i couldn't install adb/fastboot drivers with your tool. I've clicked button in Drivers section, but nothing happened. i don't know whats wrong with it. As a workaround, can you give me direct link of drivers and installation path? I will manually install drivers to program's needed path and try to make it work.
Click to expand...
Click to collapse
which version of tool you are using
hard91 said:
which version of tool you are using
Click to expand...
Click to collapse
latest version (2016-06-16) v.1.1
celikbasm said:
latest version (2016-06-16) v.1.1
Click to expand...
Click to collapse
Hello my friend
I review my v1.1 code there is a bug and thanks for reporting.
I am uploading v1.1a wait 5 min
hard91 said:
Hello my friend
I review my v1.1 code there is a bug and thanks for reporting.
I am uploading v1.1a wait 5 min
Click to expand...
Click to collapse
yeah, it's working now. thanks for efforts.
celikbasm said:
yeah, it's working now. thanks for efforts.
Click to expand...
Click to collapse
Hit thanks on download section and support me
Plz hit thanks button to support my work
hard91 said:
Hit thanks on download section and support me
Plz hit thanks button to support my work
Click to expand...
Click to collapse
i was hit thank button your OP thread early .
Thank u
ismail0100 said:
Thank u
Click to expand...
Click to collapse
Also hit thanks button
Sent from my CP8298_I00 using XDA-Developers mobile app
I am having XT1033 Moto G (1st gen) . I unrooted my device successfully 4 months back and a couple of days ago my phone got restarted by itself and got stuck on the warning bootloader unlocked screen (as i did not remove it) . I was able to get into recovery mode and flashed 5.1 stock ROM with the help of you All in 1 tool but still after flashing successfully it is stuck on the same (warning bootloader unlocked ) screen. Any suggestions would be appreciated.
My phone is locked only the warning bootloader unlocked screen is there.
Thanks for the great tool .
madeel88 said:
I am having XT1033 Moto G (1st gen) . I unrooted my device successfully 4 months back and a couple of days ago my phone got restarted by itself and got stuck on the warning bootloader unlocked screen (as i did not remove it) . I was able to get into recovery mode and flashed 5.1 stock ROM with the help of you All in 1 tool but still after flashing successfully it is stuck on the same (warning bootloader unlocked ) screen. Any suggestions would be appreciated.
My phone is locked only the warning bootloader unlocked screen is there.
Thanks for the great tool .
Click to expand...
Click to collapse
Try either 1 or 2
1. Click on lock bootloader button while phone is connected.
2. Search and download logo.bin file from your respective thread and flash it with my tool
Sent from my CP8298_I00 using XDA-Developers mobile app
Sir help my phone Moto m xt1033
---------- Post added at 02:03 PM ---------- Previous post was at 02:03 PM ----------
How to root my whatts apps number add 03446940167
This toolkit so important for all of us. Must be open source if isnt..
Esto es una ROM?
Related
MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM.
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. Supersu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. GUI hangs if you press anything during flashing. So avoid touching anything once flash button pressed.{fixed in next update}
2. You tell :cyclops:
Features:
1. Flashing stock rom on any Motorola Device (Any model).
2. Root through superuse.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool v1.1, Tool/Utility for the Moto G 2014
Contributors
hard91
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-12
Created 2016-06-12
Last Updated 2016-06-16
Downloads:
Go to this Link:
CLICK ON ME
Reserved
Screenshots
Reserved
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
No guide on How-to?
I'm actually trying to use your tool with my untouched Moto G2 I can't do any because there's no instruction on how to use your software.
I already made USB debugging on and I am expecting that your software is able to recognize my device but unfortunately nothing happens. I tried hitting ADB and Mfastboot drivers but nothing happens.
Aciong.Aksaya said:
No guide on How-to?
I'm actually trying to use your tool with my untouched Moto G2 I can't do any because there's no instruction on how to use your software.
I already made USB debugging on and I am expecting that your software is able to recognize my device but unfortunately nothing happens. I tried hitting ADB and Mfastboot drivers but nothing happens.
Click to expand...
Click to collapse
Rite now I am busy
Soon I will add a guide on how to do anything with my tool
Please report me what happened when you click on adb&mfastboot driver in driver option is there any installer opened???
Plz disable your antivirus and install motorola driver also
Sent from my CP8298_I00 using XDA-Developers mobile app
Without installing adb&fastboot driver this tool don't work
Sent from my CP8298_I00 using XDA-Developers mobile app
hard91 said:
Rite now I am busy
Soon I will add a guide on how to do anything with my tool
Please report me what happened when you click on adb&mfastboot driver in driver option is there any installer opened???
Plz disable your antivirus and install motorola driver also
Sent from my CP8298_I00 using XDA-Developers mobile app
Click to expand...
Click to collapse
Motorola drivers and minimal adb &fastboot installed. When you hit the adb&fastboot button with deactivated antivirus the installer for minmal adb&fastboot appears. Device is not recognized.
A tutorial would be very welcome.
On XT1068, Turbo Rom,deciper kernel.
try this
Wolfcity said:
Motorola drivers and minimal adb &fastboot installed. When you hit the adb&fastboot button with deactivated antivirus the installer for minmal adb&fastboot appears. Device is not recognized.
A tutorial would be very welcome.
On XT1068, Turbo Rom,deciper kernel.
Click to expand...
Click to collapse
1.install adb&mfastboot (donot change install location)
2. check and report me adb install directory (c:\program(Program (x86) in case 64 bit window)).
3. enable usb debugging option on you phone and when you first time connect your phone to PC a message will appear
click on remember this and press ok
4.now check phone info button or adb devices button.
5.Last if still it is not working then install motorola driver by installing moto suit from motrola website.
and report me on which step it works
Cant you share commands for the lock and flash the bootloader and stock rom respectly?
atendedor_de_boludos said:
Cant you share commands for the lock and flash the bootloader and stock rom respectly?
Click to expand...
Click to collapse
Yes I will soon share adb commands used in each and every button and tutorial on {How to}
hard91 said:
Yes I will soon share adb commands used in each and every button and tutorial on {How to}
Click to expand...
Click to collapse
Many thanks, this tool works like a charm.
Aciong.Aksaya said:
No guide on How-to?
I'm actually trying to use your tool with my untouched Moto G2 I can't do any because there's no instruction on how to use your software.
I already made USB debugging on and I am expecting that your software is able to recognize my device but unfortunately nothing happens. I tried hitting ADB and Mfastboot drivers but nothing happens.
Click to expand...
Click to collapse
Guide on how to with updated tool is available
Hit thanks to support
Sent from my CP8298_I00 using XDA-Developers mobile app
will this tool help me to unbrick my moto g2 .. ?? Please reply asap
hard91 said:
Go to this Link:
CLICK ON ME
Click to expand...
Click to collapse
unable to boot. nothing happens when i press any combination..
raulshama said:
unable to boot. nothing happens when i press any combination..
Click to expand...
Click to collapse
First read FAQ section
Sent from my CP8298_I00 using XDA-Developers mobile app
hello OP.
I have moto E4 plus XT1772 mediatek variant (nicklaus) and i unlock the bootloader with the command <fastboot oem unlock> so i don't have "unlock keys".
I saw on your post NO. 4: " NOTE: There is no need of bootloader unlock key while locking bootloader" but my device is from 2017 and i want to ask kindly if your tool can relock the bootloader of my device?
or can you suggest that i can use the command <fastboot oem lock>?
thanks in advance for your comments.
MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM.
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. Supersu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. GUI hangs if you press anything during flashing. So avoid touching anything once flash button pressed.{fixed in next update}
2. You tell :cyclops:
Features:
1. Flashing stock rom on any Motorola Device (Any model).
2. Root through superuse.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool v1.1, Tool/Utility for the Moto G 2014 LTE
Contributors
hard91
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-12
Created 2016-06-12
Last Updated 2016-06-16
Downloads:
Go to this Link:
CLICK ON ME
Reserved
Screenshots
Reserved
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
Awesome I am sure this will help many people. Thanks for sharing.
@hard91 just downloaded it, Virus detected!!!
You can add this to false detected as it add mfastboot file into program files of c drive some antivirus show it virus
Sent from my CP8298_I00 using XDA-Developers mobile app
Not able to get phone info
@hard91 Nice job man! Always wanted an all-in-one tool like this. But I'm experiencing a small problem. I'm not able to get my phone info. My phone is Moto G 2nd gen 4G XT1079.
Please install adb&mfstboot driver under driver option and enable usb debugging option in your phone
If still stuck then install motorola driver
Hit thanks and also report me when it works and how???
Sent from my CP8298_I00 using XDA-Developers mobile app
Did everything :good: But it still doesn't work
Pratheek Poonachha said:
Did everything :good: But it still doesn't work
Click to expand...
Click to collapse
Try new v1. 1a
And install driver first
Plz hit thanks button to support my work
Pratheek Poonachha said:
Did everything :good: But it still doesn't work
Click to expand...
Click to collapse
Download latest v1.1a
Install driver first
Plz hit thanks button to support my work
Pratheek Poonachha said:
Did everything :good: But it still doesn't work
Click to expand...
Click to collapse
Download latest v1.1a
Install driver first
Plz hit thanks button to support my work
plz send me the download link of moto tool v1.0
mr shubham garg said:
plz send me the download link of moto tool v1.0
Click to expand...
Click to collapse
Try latest one....
MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM.
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. Supersu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. GUI hangs if you press anything during flashing. So avoid touching anything once flash button pressed.{fixed in next update}
2. You tell :cyclops:
Features:
1. Flashing stock rom on any Motorola Device (Any model).
2. Root through superuse.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool v1.1, Tool/Utility for the Moto E
Contributors
hard91
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-12
Created 2016-06-12
Last Updated 2016-06-16
Downloads:
Go to this Link:
CLICK ON ME
Reserved
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
Screenshots
hard91 said:
4Shared.com
ask me for mirrors
Click to expand...
Click to collapse
This script looks apt for new users. This will make it easier for them. But you shouldn't have posted it on 4shared since it asks for Google or Facebook credentials ie. It's not a direct download link.
You can provide the *main* link as Google drive and *one of the* mirrors as 4shared.
oky
drs22 said:
This script looks apt for new users. This will make it easier for them. But you shouldn't have posted it on 4shared since it asks for Google or Facebook credentials ie. It's not a direct download link.
You can provide the *main* link as Google drive and *one of the* mirrors as 4shared.
Click to expand...
Click to collapse
oky give me some time................
Can u post.on HOW TO
I mean how to flash the files.
Am I suppose to just download twrp3.0.2, supers from their website and moto key from website.
After downloading just place them in same folder and browse the specific files in the software??
CyberCaptainKaz said:
Can u post.on HOW TO
I mean how to flash the files.
Am I suppose to just download twrp3.0.2, supers from their website and moto key from website.
After downloading just place them in same folder and browse the specific files in the software??
Click to expand...
Click to collapse
Just download stock fstboot flashable rom and click on browse button and select that folder
For rooting you need supersu. Zip from any working rooting thread put that file at any location it will ask for it when you click button
Same for twrp
Sent from my CP8298_I00 using XDA-Developers mobile app
hard91 said:
Just download stock fstboot flashable rom and click on browse button and select that folder
For rooting you need supersu. Zip from any working rooting thread put that file at any location it will ask for it when you click button
Same for twrp
Sent from my CP8298_I00 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks for the info
A feature we would like is that the app has all stuffs inbuilt(by all stuff I mean the supersu, custom recovery). For example like the one for yureka has. I know I am asking a lot but that's the way I think is a true all-in-one-toolbox
This tool is not only for moto e you can use it for any motorola device on any model
All moto devices are not using same twrp, cwm etc custom recovery
Hence not possible
I can do what are you saying but I want to make it universal moto all in one tool
Sent from my CP8298_I00 using XDA-Developers mobile app
error: no device
what to do?
Install drivers first
can you help me please got this
first of all thanks for the tool!
so now I have installed the drivers and I cant get phone info.
couldn't insert picture since im new to the forums. its the same thing as the picture couple posts above only it says list of devices attached
help will be appreciated
regards,
kevin
Kevin you need to enable usb debugging option
Sent from my CP8298_I00 using XDA-Developers mobile app
hard91 said:
snip
Click to expand...
Click to collapse
This was the only tool that could successfully downgrade my Moto E 5.1 to 4.4.4 - it looks like you have the right binaries and scripts to work the magic - thank you for sharing this.
Only issue I am having is re-locking the device -- not too worried since I'll just end up flashing a proper boot logo to change that.
alvaradorocks said:
This was the only tool that could successfully downgrade my Moto E 5.1 to 4.4.4 - it looks like you have the right binaries and scripts to work the magic - thank you for sharing this.
Only issue I am having is re-locking the device -- not too worried since I'll just end up flashing a proper boot logo to change that.
Click to expand...
Click to collapse
What is the problem in relocking bootloader
Provide me how you execute relocking steps
Sent from my CP8298_I00 using XDA-Developers mobile app
No WPA_CLI in moto e
Faheem1234 said:
No WPA_CLI in moto e
Click to expand...
Click to collapse
Only selected phones have wps pin entry option
Else you can use rever
Sent from my CP8298_I00 using XDA-Developers mobile app
boost moto e XT1526
found that in order to flash custom recovery option, i must first go to flasher and hit the auto button( or click boot loader on phone info tab) once phone in that mode i could flash recovery.
Seems i am unable to flash a custom rom. going into twrp recovery, going advanced and starting adb sideload on the phone and starting the transfer in the motorola all-in-1 program. the program never actually transfers. on my phone it says starting adb sideload, but then it says it times out. is there anyway a log can be implimented into the program to see what commands it is executing?
drats666 said:
found that in order to flash custom recovery option, i must first go to flasher and hit the auto button( or click boot loader on phone info tab) once phone in that mode i could flash recovery.
Seems i am unable to flash a custom rom. going into twrp recovery, going advanced and starting adb sideload on the phone and starting the transfer in the motorola all-in-1 program. the program never actually transfers. on my phone it says starting adb sideload, but then it says it times out. is there anyway a log can be implimented into the program to see what commands it is executing?
Click to expand...
Click to collapse
Yes, in my next version i will definitely add log file on each and every click
So, when will I release next version
Ans. After 500+ thanks, because this tool downloaded 3,000 times and I don't get regard for my work
Sent from my CP8298_I00 using XDA-Developers mobile app
drats666 said:
found that in order to flash custom recovery option, i must first go to flasher and hit the auto button( or click boot loader on phone info tab) once phone in that mode i could flash recovery.
Seems i am unable to flash a custom rom. going into twrp recovery, going advanced and starting adb sideload on the phone and starting the transfer in the motorola all-in-1 program. the program never actually transfers. on my phone it says starting adb sideload, but then it says it times out. is there anyway a log can be implimented into the program to see what commands it is executing?
Click to expand...
Click to collapse
Log file added in v 2.5
MOTO All-In-one Tool
Supported Model:
Any moto device
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. Supersu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. GUI hangs if you press anything during flashing. So avoid touching anything once flash button pressed.{fixed in next update}
2. You tell :cyclops:
Features:
1. Flashing stock rom on any Motorola Device (Any model).
2. Root through superuse.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool v1.1, Tool/Utility for the Moto Z
Contributors
hard91
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-12
Created 2016-06-13
Last Updated 2016-06-16
Downloads
Go to this Link:
CLICK ON ME
Screenshots
Screenshots
FAQ
FAQ reserved
Guide
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
Version for Linux
ExaHamza said:
Version for Linux
Click to expand...
Click to collapse
Not available for linux
Sent from my CP8298_I00 using XDA-Developers mobile app
Do you have a link to the location of the custom recovery?
are the drivers included in the AIO Tool? For some reason I cant download the Tool from the provided link, my laptop hates mediafire, so I am having to hunt for it seperately. I found the MOTO AIO Tool, and another program for ADB called minimal ADB/Fastboot.
Has anyone tried this on a Moto Z? I assume the Verizon variant has a locked bootloader and the Motorola version will be unockable.
Sent from my XT1575 using Tapatalk
I tried it, didn't work and I have tried just about every root tool known to man... All, unsuccessful!
Sent from my XT1650 using Tapatalk
Verizon's bootloader is locked on both the Z and the Force. You can get to the dev options through the usual taps, but when you unlock the bootloader with the toggle, nothing happens. It's gonna take some cracking to get into it. There are 3 quadrooter exploits that someone better than me at coding might be able to get into, but knowing big red, it might not happen. I think the mods aspect of it may spur action, but the outlook is bleak on the force forum.
Dind't work for me, i've installed the drivers following the intructions but, the tool don't recognize my phone and i get this message "adb is not recognized as an internal or external command" same for fastboot , i already unlocked the bootloader following the intructions on motorola site.
nesgcmx said:
Dind't work for me, i've installed the drivers following the intructions but, the tool don't recognize my phone and i get this message "adb is not recognized as an internal or external command" same for fastboot , i already unlocked the bootloader following the intructions on motorola site.
Click to expand...
Click to collapse
Try updated v 2.0
Sent from my CP8298_I00 using XDA-Developers mobile app
I'm thinking about purchasing the moto z play, will this program be compatible?
Sent from my Nexus 6P using Tapatalk
blackrome0 said:
I'm thinking about purchasing the moto z play, will this program be compatible?
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
No one reported yet
Sent from my CP8298_I00 using XDA-Developers mobile app
hard91 said:
Try updated v 2.0
Sent from my CP8298_I00 using XDA-Developers mobile app
Click to expand...
Click to collapse
Still not working for me on V 2.0
nesgcmx said:
Still not working for me on V 2.0
Click to expand...
Click to collapse
Send me log file and screenshot
Sent from my CP8298_I00 using XDA-Developers mobile app
Hello again and apologize for the late reply, I have managed to make the program see my phone but now when trying to flash a rom stock gives me a message saying NULLmotoboot.img and does not allow me to flash the system, I have reviewed the rom files and .img file that does not come within the rom.
nesgcmx said:
Hello again and apologize for the late reply, I have managed to make the program see my phone but now when trying to flash a rom stock gives me a message saying NULLmotoboot.img and does not allow me to flash the system, I have reviewed the rom files and .img file that does not come within the rom.
Click to expand...
Click to collapse
Send me list of file in zip folder and your model detail
Sent from my CP8298_I00 using XDA-Developers mobile app
MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM ( except mtk chipset devices like moto e3)
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. SuperSu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. You tell :cyclops:
Features:
1. Flashing stock ROM on any Motorola Device (Any model).
2. Root through SuperSu.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool, Tool/Utility for all devices (see above for details)
Contributors
hard91
Version Information
Status: Stable
Stable Release Date: 2016-09-17
Created 2016-09-17
Last Updated 2016-11-02
Downloads:
Latest:
Link: MOTO ALL-IN-ONE v2.5
Downloaded: 40,300 times
Thanks for liking my work that much
change Note:
1. Flashing Stock ROM For moto Z model updated.
2. Links in log file for this post updated.
MOTO ALL-IN-ONE TOOL v 2.0
change Note:
1. Log File added.
2. while Flashing STOCK ROM, GUI will not hang.
3. For every button script used is added in log file.
4. windows tray icon with message popup added
5. Links for update and SuperSu.zip added.
Bugs:
1. GUI Hangs if you are loading a heavy zip in sideload process(will fix in next update.)
Previous Release:
1. MOTO ALL-IN-ONE TOOL v 2.0 Downloaded 4,400 times
2. MOTO ALL-IN-ONE TOOL v 1.1 a (Driver button Fix) Downloaded 10,280 times
3. MOTO ALL-IN-ONE TOOL v 1.0 Downloaded 1,000 times
Ask me for mirror on any website
Please don't mirror my work as I constantly monitoring my no of downloads which gives me energy to give you constant updates.
How to Section
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
F.A.Q Section
Frequently Asked Question
1. Why I am not Replying to your bug reported?
Ans. Because you Quote my whole thread which irritates me.
2. I have XYZ moto device with XYZ Model will your TOOL Unlock my bootloader?
Ans. Please read my how to section and my first post where in Prerequest section I have clearly written that for Unlocking bootloader You need a bootloader key and if your mobile is under any contract which donot let you unlock bootloader then this tool will not work. but if your bootloader can be unlocked then you can use my tool to get bootloader string to paste it in moto website to get 20 digit key.
3. I am not getting reply from Tool ?
Ans. 1. Check whether you have installed drivers.(from driver groupbox)
2.Check your usb-debugging option is enabled and you gave permission on your mobile to remember this PC.
3.Check whether path of the installed drivers is present in your environment variable under PATH, if not present then append it (followed by
4 How To report a bug?
Ans. First be polite,mention me in your comment via @hard91 and Give me detail like Mobile Name(MOTO E,E2015,G,G+ etc) and MODEL (XT 1022, XT 10XX etc), and in next line give your bug Details. and what is possible solution you want and you think.
5. WOW your Tool is great and it works for me how can I help you?
Ans. You can HIT thanks button on my this POST and other posts which helped you and PLEASE TELL ME YOUR MODEL(XT1022 ETC) AND MOBILE NAME(moto E,G,G+,X,PLAY ETC),YOUR COUNTRY AND STATE
Reserved For Bug update
Bugs and change note
Hi hard91
Did you test with moto Z xt1650 ? i am glad to see your reply, thanks.
hard91 said:
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
Click to expand...
Click to collapse
@smackzhao read FAQ point 1
I have the add free version of the G4 from Amazon. It is rooted bootloader unlocked and has TWRP installed. Can I use this to flash the OTA file from my device? If i can what steps do I need to take?
If not, do I need the full factory ROM to update?
Thanks
matt_man said:
I have the add free version of the G4 from Amazon. It is rooted bootloader unlocked and has TWRP installed. Can I use this to flash the OTA file from my device? If i can what steps do I need to take?
If not, do I need the full factory ROM to update?
Thanks
Click to expand...
Click to collapse
No, and you need full factory ROM
You saved my life, good sir. I was stuck in a very bad bootloop.
Thank you!
cloudfe said:
You saved my life, good sir. I was stuck in a very bad bootloop.
Thank you!
Click to expand...
Click to collapse
Good to know
Plz mention model and moto series
hard91 said:
Good to know
Plz mention model and moto series
Click to expand...
Click to collapse
Moto G 1st Gen, LTE XT1039 Peregrine.
cloudfe said:
Moto G 1st Gen, LTE XT1039 Peregrine.
Click to expand...
Click to collapse
Can you send me your log file
hard91 said:
Can you send me your log file
Click to expand...
Click to collapse
Where should I find it?
cloudfe said:
Where should I find it?
Click to expand...
Click to collapse
In log folder
hard91 said:
In log folder
Click to expand...
Click to collapse
I'm afraid I can't help you, I already installed a new Rom and factory-wiped the device
Development stopped till my exams
My phones already unlocked and twrp installed. Can i use this tool just to flash supersu/root and if so which version of supersu? thanks
I need to root my mobile moto g xt1033 root and unlock and upgrade a ROM can you help me brother? My what apps number 03446940167 help me plz sir add help group
trsix said:
My phones already unlocked and twrp installed. Can i use this tool just to flash supersu/root and if so which version of supersu? thanks
Click to expand...
Click to collapse
This tool just push super su.zip file to internal memory and reboot your phone into recovery