MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM.
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. Supersu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. GUI hangs if you press anything during flashing. So avoid touching anything once flash button pressed.{fixed in next update}
2. You tell :cyclops:
Features:
1. Flashing stock rom on any Motorola Device (Any model).
2. Root through superuse.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool v1.1, Tool/Utility for the Moto G 2014 LTE
Contributors
hard91
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-12
Created 2016-06-12
Last Updated 2016-06-16
Downloads:
Go to this Link:
CLICK ON ME
Reserved
Screenshots
Reserved
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
Awesome I am sure this will help many people. Thanks for sharing.
@hard91 just downloaded it, Virus detected!!!
You can add this to false detected as it add mfastboot file into program files of c drive some antivirus show it virus
Sent from my CP8298_I00 using XDA-Developers mobile app
Not able to get phone info
@hard91 Nice job man! Always wanted an all-in-one tool like this. But I'm experiencing a small problem. I'm not able to get my phone info. My phone is Moto G 2nd gen 4G XT1079.
Please install adb&mfstboot driver under driver option and enable usb debugging option in your phone
If still stuck then install motorola driver
Hit thanks and also report me when it works and how???
Sent from my CP8298_I00 using XDA-Developers mobile app
Did everything :good: But it still doesn't work
Pratheek Poonachha said:
Did everything :good: But it still doesn't work
Click to expand...
Click to collapse
Try new v1. 1a
And install driver first
Plz hit thanks button to support my work
Pratheek Poonachha said:
Did everything :good: But it still doesn't work
Click to expand...
Click to collapse
Download latest v1.1a
Install driver first
Plz hit thanks button to support my work
Pratheek Poonachha said:
Did everything :good: But it still doesn't work
Click to expand...
Click to collapse
Download latest v1.1a
Install driver first
Plz hit thanks button to support my work
plz send me the download link of moto tool v1.0
mr shubham garg said:
plz send me the download link of moto tool v1.0
Click to expand...
Click to collapse
Try latest one....
Related
MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM.
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. Supersu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. GUI hangs if you press anything during flashing. So avoid touching anything once flash button pressed.{fixed in next update}
2. You tell :cyclops:
Features:
1. Flashing stock rom on any Motorola Device (Any model).
2. Root through superuse.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool v1.1, Tool/Utility for the Moto G 2014
Contributors
hard91
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-12
Created 2016-06-12
Last Updated 2016-06-16
Downloads:
Go to this Link:
CLICK ON ME
Reserved
Screenshots
Reserved
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
No guide on How-to?
I'm actually trying to use your tool with my untouched Moto G2 I can't do any because there's no instruction on how to use your software.
I already made USB debugging on and I am expecting that your software is able to recognize my device but unfortunately nothing happens. I tried hitting ADB and Mfastboot drivers but nothing happens.
Aciong.Aksaya said:
No guide on How-to?
I'm actually trying to use your tool with my untouched Moto G2 I can't do any because there's no instruction on how to use your software.
I already made USB debugging on and I am expecting that your software is able to recognize my device but unfortunately nothing happens. I tried hitting ADB and Mfastboot drivers but nothing happens.
Click to expand...
Click to collapse
Rite now I am busy
Soon I will add a guide on how to do anything with my tool
Please report me what happened when you click on adb&mfastboot driver in driver option is there any installer opened???
Plz disable your antivirus and install motorola driver also
Sent from my CP8298_I00 using XDA-Developers mobile app
Without installing adb&fastboot driver this tool don't work
Sent from my CP8298_I00 using XDA-Developers mobile app
hard91 said:
Rite now I am busy
Soon I will add a guide on how to do anything with my tool
Please report me what happened when you click on adb&mfastboot driver in driver option is there any installer opened???
Plz disable your antivirus and install motorola driver also
Sent from my CP8298_I00 using XDA-Developers mobile app
Click to expand...
Click to collapse
Motorola drivers and minimal adb &fastboot installed. When you hit the adb&fastboot button with deactivated antivirus the installer for minmal adb&fastboot appears. Device is not recognized.
A tutorial would be very welcome.
On XT1068, Turbo Rom,deciper kernel.
try this
Wolfcity said:
Motorola drivers and minimal adb &fastboot installed. When you hit the adb&fastboot button with deactivated antivirus the installer for minmal adb&fastboot appears. Device is not recognized.
A tutorial would be very welcome.
On XT1068, Turbo Rom,deciper kernel.
Click to expand...
Click to collapse
1.install adb&mfastboot (donot change install location)
2. check and report me adb install directory (c:\program(Program (x86) in case 64 bit window)).
3. enable usb debugging option on you phone and when you first time connect your phone to PC a message will appear
click on remember this and press ok
4.now check phone info button or adb devices button.
5.Last if still it is not working then install motorola driver by installing moto suit from motrola website.
and report me on which step it works
Cant you share commands for the lock and flash the bootloader and stock rom respectly?
atendedor_de_boludos said:
Cant you share commands for the lock and flash the bootloader and stock rom respectly?
Click to expand...
Click to collapse
Yes I will soon share adb commands used in each and every button and tutorial on {How to}
hard91 said:
Yes I will soon share adb commands used in each and every button and tutorial on {How to}
Click to expand...
Click to collapse
Many thanks, this tool works like a charm.
Aciong.Aksaya said:
No guide on How-to?
I'm actually trying to use your tool with my untouched Moto G2 I can't do any because there's no instruction on how to use your software.
I already made USB debugging on and I am expecting that your software is able to recognize my device but unfortunately nothing happens. I tried hitting ADB and Mfastboot drivers but nothing happens.
Click to expand...
Click to collapse
Guide on how to with updated tool is available
Hit thanks to support
Sent from my CP8298_I00 using XDA-Developers mobile app
will this tool help me to unbrick my moto g2 .. ?? Please reply asap
hard91 said:
Go to this Link:
CLICK ON ME
Click to expand...
Click to collapse
unable to boot. nothing happens when i press any combination..
raulshama said:
unable to boot. nothing happens when i press any combination..
Click to expand...
Click to collapse
First read FAQ section
Sent from my CP8298_I00 using XDA-Developers mobile app
hello OP.
I have moto E4 plus XT1772 mediatek variant (nicklaus) and i unlock the bootloader with the command <fastboot oem unlock> so i don't have "unlock keys".
I saw on your post NO. 4: " NOTE: There is no need of bootloader unlock key while locking bootloader" but my device is from 2017 and i want to ask kindly if your tool can relock the bootloader of my device?
or can you suggest that i can use the command <fastboot oem lock>?
thanks in advance for your comments.
MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM.
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. Supersu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. GUI hangs if you press anything during flashing. So avoid touching anything once flash button pressed.{fixed in next update}
2. You tell :cyclops:
Features:
1. Flashing stock rom on any Motorola Device (Any model).
2. Root through superuse.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool v1.1, Tool/Utility for the Moto G 2015
Contributors
hard91
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-12
Created 2016-06-12
Last Updated 2016-06-16
Downloads:
Go to this Link:
CLICK ON ME
Reserved for Tutorials
Screenshots
Reserved
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
Dont work trying to lock bootloader
skooter32 said:
Dont work trying to lock bootloader
Click to expand...
Click to collapse
On which model?
Can you send me code to lock your bootloader
MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM.
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. Supersu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. GUI hangs if you press anything during flashing. So avoid touching anything once flash button pressed.{fixed in next update}
2. You tell :cyclops:
Features:
1. Flashing stock rom on any Motorola Device (Any model).
2. Root through superuse.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool v1.1, Tool/Utility for the Moto E 2015
Contributors
hard91
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-12
Created 2016-06-12
Last Updated 2016-06-16
Downloads:
Go to this Link:
CLICK ON ME
Reserved
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
Screenshots
Supports Verizon model since the Verizon model can't be rooted
This tool only push supersu.zip into sdcard and reboot into recovery from where you install supersu zip
Sent from my CP8298_I00 using XDA-Developers mobile app
hard91 said:
This tool only push supersu.zip into sdcard and reboot into recovery from where you install supersu zip
Sent from my CP8298_I00 using XDA-Developers mobile app
Click to expand...
Click to collapse
So it won't even work to root on Verizon model correct?
Yes
Sent from my CP8298_I00 using XDA-Developers mobile app
Hi,,Plz help me.. i am a beginner in rooting.. i have unlocked bootloaded for moto g3, flashed logo.bin to remove warning message,installed twrp , after that i have tried to root using supersu.zip ..Now my phone is stuck in bootloop...What should i do..Plz give suggestion..
i have used below files
twrp-osprey-3.0.2-r1_2
UPDATE-SuperSU-v2.65-20151226141550
logo.bin
all are downloaded from XDa forum itself
vedhavyga said:
Hi,,Plz help me.. i am a beginner in rooting.. i have unlocked bootloaded for moto g3, flashed logo.bin to remove warning message,installed twrp , after that i have tried to root using supersu.zip ..Now my phone is stuck in bootloop...What should i do..Plz give suggestion..
i have used below files
twrp-osprey-3.0.2-r1_2
UPDATE-SuperSU-v2.65-20151226141550
logo.bin
all are downloaded from XDa forum itself
Click to expand...
Click to collapse
You are doing it in wrong way
hard91 said:
You are doing it in wrong way
Click to expand...
Click to collapse
Could you please give ur email/whats app no ?
Promise won't disturb you much
hard91 said:
You are doing it in wrong way
Click to expand...
Click to collapse
I finally flashed stock ROM and rooted..I found the mistake I have done.. I have given read only permission for twrp...::
Anyway wished to install xposed frame work..
Could you please share any third for it
can this flash hard bricked moto e
MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM.
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. Supersu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. GUI hangs if you press anything during flashing. So avoid touching anything once flash button pressed.{fixed in next update}
2. You tell :cyclops:
Features:
1. Flashing stock rom on any Motorola Device (Any model).
2. Root through superuse.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool v1.1, Tool/Utility for the Moto X
Contributors
hard91
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-12
Created 2016-06-12
Last Updated 2016-06-16
Downloads:
Go to this Link:
CLICK ON ME
Reserved
Screenshots
reserved
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
can i down grade with this tool? with locked boot loader ?
Looks like this is a flashing tool. Does this do the work of softbricking phones the way CrashXXL's method does? Could it be used to install Xposed on a bootloader locked device?
Thanks for the tool. One minor problem. I have my screen set to 144 DPI to help my old eyes.
I have to reset it to normal 96 DPI to be able to read the markings on the buttons.
It looks like it will be a big help when I work up the courage to root my phone. Well done.
hohosanta said:
can i down grade with this tool? with locked boot loader ?
Click to expand...
Click to collapse
Yes someone reported working.....
Sent from my CP8298_I00 using XDA-Developers mobile app
lpjunior999 said:
Looks like this is a flashing tool. Does this do the work of softbricking phones the way CrashXXL's method does? Could it be used to install Xposed on a bootloader locked device?
Click to expand...
Click to collapse
I have no idea
Sent from my CP8298_I00 using XDA-Developers mobile app
MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM ( except mtk chipset devices like moto e3)
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. SuperSu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. You tell :cyclops:
Features:
1. Flashing stock ROM on any Motorola Device (Any model).
2. Root through SuperSu.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool, Tool/Utility for all devices (see above for details)
Contributors
hard91
Version Information
Status: Stable
Stable Release Date: 2016-09-17
Created 2016-09-17
Last Updated 2016-11-02
Downloads:
Latest:
Link: MOTO ALL-IN-ONE v2.5
Downloaded: 40,300 times
Thanks for liking my work that much
change Note:
1. Flashing Stock ROM For moto Z model updated.
2. Links in log file for this post updated.
MOTO ALL-IN-ONE TOOL v 2.0
change Note:
1. Log File added.
2. while Flashing STOCK ROM, GUI will not hang.
3. For every button script used is added in log file.
4. windows tray icon with message popup added
5. Links for update and SuperSu.zip added.
Bugs:
1. GUI Hangs if you are loading a heavy zip in sideload process(will fix in next update.)
Previous Release:
1. MOTO ALL-IN-ONE TOOL v 2.0 Downloaded 4,400 times
2. MOTO ALL-IN-ONE TOOL v 1.1 a (Driver button Fix) Downloaded 10,280 times
3. MOTO ALL-IN-ONE TOOL v 1.0 Downloaded 1,000 times
Ask me for mirror on any website
Please don't mirror my work as I constantly monitoring my no of downloads which gives me energy to give you constant updates.
How to Section
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
F.A.Q Section
Frequently Asked Question
1. Why I am not Replying to your bug reported?
Ans. Because you Quote my whole thread which irritates me.
2. I have XYZ moto device with XYZ Model will your TOOL Unlock my bootloader?
Ans. Please read my how to section and my first post where in Prerequest section I have clearly written that for Unlocking bootloader You need a bootloader key and if your mobile is under any contract which donot let you unlock bootloader then this tool will not work. but if your bootloader can be unlocked then you can use my tool to get bootloader string to paste it in moto website to get 20 digit key.
3. I am not getting reply from Tool ?
Ans. 1. Check whether you have installed drivers.(from driver groupbox)
2.Check your usb-debugging option is enabled and you gave permission on your mobile to remember this PC.
3.Check whether path of the installed drivers is present in your environment variable under PATH, if not present then append it (followed by
4 How To report a bug?
Ans. First be polite,mention me in your comment via @hard91 and Give me detail like Mobile Name(MOTO E,E2015,G,G+ etc) and MODEL (XT 1022, XT 10XX etc), and in next line give your bug Details. and what is possible solution you want and you think.
5. WOW your Tool is great and it works for me how can I help you?
Ans. You can HIT thanks button on my this POST and other posts which helped you and PLEASE TELL ME YOUR MODEL(XT1022 ETC) AND MOBILE NAME(moto E,G,G+,X,PLAY ETC),YOUR COUNTRY AND STATE
Reserved For Bug update
Bugs and change note
Hi hard91
Did you test with moto Z xt1650 ? i am glad to see your reply, thanks.
hard91 said:
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
Click to expand...
Click to collapse
@smackzhao read FAQ point 1
I have the add free version of the G4 from Amazon. It is rooted bootloader unlocked and has TWRP installed. Can I use this to flash the OTA file from my device? If i can what steps do I need to take?
If not, do I need the full factory ROM to update?
Thanks
matt_man said:
I have the add free version of the G4 from Amazon. It is rooted bootloader unlocked and has TWRP installed. Can I use this to flash the OTA file from my device? If i can what steps do I need to take?
If not, do I need the full factory ROM to update?
Thanks
Click to expand...
Click to collapse
No, and you need full factory ROM
You saved my life, good sir. I was stuck in a very bad bootloop.
Thank you!
cloudfe said:
You saved my life, good sir. I was stuck in a very bad bootloop.
Thank you!
Click to expand...
Click to collapse
Good to know
Plz mention model and moto series
hard91 said:
Good to know
Plz mention model and moto series
Click to expand...
Click to collapse
Moto G 1st Gen, LTE XT1039 Peregrine.
cloudfe said:
Moto G 1st Gen, LTE XT1039 Peregrine.
Click to expand...
Click to collapse
Can you send me your log file
hard91 said:
Can you send me your log file
Click to expand...
Click to collapse
Where should I find it?
cloudfe said:
Where should I find it?
Click to expand...
Click to collapse
In log folder
hard91 said:
In log folder
Click to expand...
Click to collapse
I'm afraid I can't help you, I already installed a new Rom and factory-wiped the device
Development stopped till my exams
My phones already unlocked and twrp installed. Can i use this tool just to flash supersu/root and if so which version of supersu? thanks
I need to root my mobile moto g xt1033 root and unlock and upgrade a ROM can you help me brother? My what apps number 03446940167 help me plz sir add help group
trsix said:
My phones already unlocked and twrp installed. Can i use this tool just to flash supersu/root and if so which version of supersu? thanks
Click to expand...
Click to collapse
This tool just push super su.zip file to internal memory and reboot your phone into recovery