Someone can help me to flash recovery? - Samsung Galaxy Core Prime Questions & Answers

I'm trying install TWRP recovery (exactly 3.0.20) in my Galaxy Core Prime (SM-G361F) but for some reason i can't flash it into the phone. Last time I tested to flash with TWRP manager and NOTHING. The only thing was bringing is more problems (Also i had to install again the Stock ROM) and try again. I'm so frustrating :crying::crying::crying:
Someone can help me to flash recovery?

How are you installing the TWRP? Via Odin?

Try to install TWRP install via Odin through PC. It's always a bit clunky to install through apps in phone. Therefore, Odin is recommended.

Use Rashr app from playstore. It has a TWRP Recovery.

Dragon FX said:
I'm trying install TWRP recovery (exactly 3.0.20) in my Galaxy Core Prime (SM-G361F) but for some reason i can't flash it into the phone. Last time I tested to flash with TWRP manager and NOTHING. The only thing was bringing is more problems (Also i had to install again the Stock ROM) and try again. I'm so frustrating :crying::crying::crying:
Someone can help me to flash recovery?
Click to expand...
Click to collapse
Use odin for windows pc. Place it ap slot. then flash. After flashing you see reset. Then immediately phone will go to boot. you should not boot the phone as it replaces with stock recovery. so you should immediately remove the battery after flashing- seeing reset/pass on odin on pc. Don't remove battery if you can't see reset/pass on pc. Then press volume up, power and home button simultaneously to enter TWRP recovery. DONE
Thanks

It appears "RECOVERY IS NOT SEANDROID ENFORCING"

Give screen shot

You said SM-G361F? Sir there is no TWRP for G361F. But for G361H it has.

Related

Please Help Very Frustrated.

hello guys,
i bought a used galaxy s5 from someone running Poland Android lollipop 5.0 and it shows the model as SM-G900F When i try to root it with CF-Auto-Root-klte-kltedx-smg900f It gets stuck on the boot screen saying
"1. RECOVERY BOOTING (in blue),
2. RECOVERY IS NOT SEANDROID ENFORCING (red)
3. Set Warranty Bit: recovery (yellow)"
i googled alot and flashed Phillz recovery which removed the error above but when i go to recovery its the stock recovery? .... I cant install twrp-2.8.7.0-klte.img.tar Either because after flashing it when i go to recovery its stock recovery again. Activation lock is off, SE for Android status is "enforing" does this mean this phone has a locked bootloader? Maybe this phone was on At&T, Sprint or Verizon and the last owner flashed 900f firmware on it to make it look carrier free but it maybe a carrier phoone? Please help me i am very very frustrated right now. i dont even know what recovery is seandroid enforcing means.....:crying::crying::crying:
dork997 said:
hello guys,
i bought a used galaxy s5 from someone running Poland Android lollipop 5.0 and it shows the model as SM-G900F When i try to root it with CF-Auto-Root-klte-kltedx-smg900f It gets stuck on the boot screen saying
"1. RECOVERY BOOTING (in blue),
2. RECOVERY IS NOT SEANDROID ENFORCING (red)
3. Set Warranty Bit: recovery (yellow)"
i googled alot and flashed Phillz recovery which removed the error above but when i go to recovery its the stock recovery? .... I cant install twrp-2.8.7.0-klte.img.tar Either because after flashing it when i go to recovery its stock recovery again. Activation lock is off, SE for Android status is "enforing" does this mean this phone has a locked bootloader? Maybe this phone was on At&T, Sprint or Verizon and the last owner flashed 900f firmware on it to make it look carrier free but it maybe a carrier phoone? Please help me i am very very frustrated right now. i dont even know what recovery is seandroid enforcing means.....:crying::crying::crying:
Click to expand...
Click to collapse
Akalsemann said:
Ok guys, try this.
1. Download philz kernel that matches your modem number. I think philz_touch_6.26.6-klte.tar.md5 works good.
2. Put it in ODIN on PDA/AP
3. Uncheck "Auto Reboot" and make sure Re-Partition is NOT CHECKED (keep F. Reset time)
4. Flash
5. It will say RESET on Odin and nothing further when it is done so just wait 2-3 minutes when RESET appears to be entirely sure that the procedure is done.
6. Pull out phones battery.
7. Put it back in and now go into Recovery directly (Vol up+home+power)
8. ???
9. Profit
Hopefully this might work, i think i did the same
Click to expand...
Click to collapse
Try that
Akalsemann said:
Try that
Click to expand...
Click to collapse
Kindly note that i am able to boot fine now, but the recovery wont stick and whenever i try to root this seandroid error happens
Did u do the following steps correctly
it should work bro
Been there
done the same process
thanx again Akalsemann
vinura kithmal said:
Did u do the following steps correctly
it should work bro
Been there
done the same process
thanx again Akalsemann
Click to expand...
Click to collapse
yes i entered philz recovery > selected format to install new rom > now stuck on samsung logo maybe it removed rom files. Now downloading flash roms from sammobile. Dont know if it will let me root it or not. can u please explain what this error is and why is it caused?
dork997 said:
Kindly note that i am able to boot fine now, but the recovery wont stick and whenever i try to root this seandroid error happens
Click to expand...
Click to collapse
You need to just boot into download mode (voldown+home+power) then push volup to enter download mode
Use Odin to flash trwp 2.8.6.0 tar file in AP spot
Download a pre rooted rom of your choice for g900f
Place on sd card
Reboot to twrp by holding volup+home+power immediately during start of boot
Flash the rom you just downloaded
Now you'll be rooted
(That's what I did in order to get my phone rooted after installing the newest stock lollipop ota)
Sent from my SM-G900F using Tapatalk
dork997 said:
yes i entered philz recovery > selected format to install new rom > now stuck on samsung logo maybe it removed rom files. Now downloading flash roms from sammobile. Dont know if it will let me root it or not. can u please explain what this error is and why is it caused?
Click to expand...
Click to collapse
Common bro
u haven't rooted your device,
u have to flash the supersu zip to get the root access
http://download.chainfire.eu/supersu
first download this file and place it in your device storage,once u pull the battry off and put it back in go straightly to the recovery
select install zip and flash the supersu.zip
then reboot it,after the first boot then go to the recovery and
install your custom rom
Swimguy14 said:
You need to just boot into download mode (voldown+home+power) then push volup to enter download mode
Use Odin to flash trwp 2.8.6.0 tar file in AP spot
Download a pre rooted rom of your choice for g900f
Place on sd card
Reboot to twrp by holding volup+home+power immediately during start of boot
Flash the rom you just downloaded
Now you'll be rooted
(That's what I did in order to get my phone rooted after installing the newest stock lollipop ota)
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
vinura kithmal said:
Common bro
u haven't rooted your device,
u have to flash the supersu zip to get the root access
http://download.chainfire.eu/supersu
first download this file and place it in your device storage,once u pull the battry off and put it back in go straightly to the recovery
select install zip and flash the supersu.zip
then reboot it,after the first boot then go to the recovery and
install your custom rom
Click to expand...
Click to collapse
I followed instructions given earlier to install philz recovery, i opened it by booting into it immediately i selected format for new rom install. after that i am stuck on samsung logo i think the old rom is now deleted. Now i am downloading fresh 5.0.2 UK from sammobile i will download it and try to root it normally with flashing CF ROOT via odin. if it does not work then i will do what u guys said. I dont know if TWRP will work by the same method (booting immediately into recovery) but philz recovery did. And i will also try flashing a prerooted Rom. What i dont understand is that why is this happening in the first place? i had an alpha before i could enter into TWRP normally i rooted it with CF AUTO root normally...no errors or anything why is this happening on my S5? the last owner must have done something weird with it ...i am trying to figure out why is this happening in the first place. Appreciate ur feedback.
I also dont know why this is happening
and yeah
i had all the galaxy S series upto S5 and this the only device that is not rooting with CF-auto root
the latest updates from samsung may have done something i dnt knw
and eralier mentioned method worked 100% for me and i did root my device like that
And last owner may b or may not done anything with it because my device is a brand new and still i had that issue

Help Root Samsung S5 5.0 SM-G900H baseband G900HXXU1BOL2 BUILD # LRX21T.G900HXXS1BPD2

Hello, I need help to rooting my phone. I am currently using Samsung Galaxy S5 model number SM-G900H with Android version 5.0, Baseband version G900HXXU1BOL2 , Kernel version 3.10.9-5852541, Build Number LRX21T.G900HXXS1BPD2, and KNOX 2.3.
I've follow many tutorials on how to root my S5 but with no luck... it always get boot stuck after flashing CF-Auto-Root-k3g-k3gxx-smg900h.tar.md5 using ODIN3-v3.10.6. What else could be wrong ?
Some S5s don't like CF AR
Copy SuperSU.zip to your phone/microSD
Flash TWRP with ODIN (Uncheck Auto reboot first in ODIN)
http://forum.xda-developers.com/showthread.php?t=2725939
Once it completes the flash, disconnect the USB, and pull the battery to power off the phone
Replace the battery, and immediately boot into recovery with Volume Up & Home & Power
Flash SuperSU
Reboot (If asked to root again from TWRP after flashing SuperSU, say NO)
*Detection* said:
Some S5s don't like CF AR
Copy SuperSU.zip to your phone/microSD
Flash TWRP with ODIN (Uncheck Auto reboot first in ODIN)
http://forum.xda-developers.com/showthread.php?t=2725939
Once it completes the flash, disconnect the USB, and pull the battery to power off the phone
Replace the battery, and immediately boot into recovery with Volume Up & Home & Power
Flash SuperSU
Reboot (If asked to root again from TWRP after flashing SuperSU, say NO)
Click to expand...
Click to collapse
Thank you for your assist... i will try it and post the results here... Should i use the last version of Odin and SuperSU anyway ?
Yep, use the latest versions
*Detection* said:
Yep, use the latest versions
Click to expand...
Click to collapse
I did all the step above but after flashing twrp-k3gxx.tar , remove the battery and entering recovery mode, nothing is change there, it just entering the original recovery mode. Do twrp-k3gxx.tar is the correct version for my SM-G900H ?
*Detection* said:
Yep, use the latest versions
Click to expand...
Click to collapse
frenxl said:
I did all the step above but after flashing twrp-k3gxx.tar , remove the battery and entering recovery mode, nothing is change there, it just entering the original recovery mode. Do twrp-k3gxx.tar is the correct version for my SM-G900H ?
Click to expand...
Click to collapse
What happen if I just flash SuperSU directly via ODIN ?
Did you put the phone in download mode, and did ODIN show a connected COM port at the top?
Did it say successful flash?
Try leaving Auto Reboot checked and do it again, let the phone reboot, and then try booting into recovery
You can't flash SuperSU from ODIN, it's a zip file, not an ODIN flashable .md5 or .tar
*Detection* said:
Did you put the phone in download mode, and did ODIN show a connected COM port at the top?
Did it say successful flash?
Try leaving Auto Reboot checked and do it again, let the phone reboot, and then try booting into recovery
You can't flash SuperSU from ODIN, it's a zip file, not an ODIN flashable .md5 or .tar
Click to expand...
Click to collapse
Yes I did put the phone in download mode, and ODIN show a connected COM port, i know how to used it and succesfully flashing the twrp-k3gxx.tar, pull the batt out and back in, boot in to recovery mode and nothing is happen... i just entering the stock recovery mode. it is like something overwrites the custom recovery right just before the phone boot up.
I think it is likely that Root image doesn’t seem to worked with the newest Android software update version, or maybe Samsung might also try to released some patches to the Android system that might prevent from customizing ?
I also tried to flasing CF-Auto-Root-k3g-k3gxx-smg900h.zip but it soft-break my phone so i have to flashing back to stock rom (luckyly i have download it before)
Stuck with the same issue. Plenty of Auto Root tutorials are available. Each one specifies that tutorial is exclusive to particular model number. G900HXXUIBOL2 is my build number. Once installed CF Auto Root. When verified via Root Checker, it showed success and got root access !!..But Couldn't enter recovery mode since then..was getting stucked in boot loop when trying to enter recovery mode. Had to restore stock ROM...Really frustrated with Samsung's UI. Wish I could change to Cyanogenmod..Any help would be really appreciated..Thanks in Advance

Cannot install custom recovery on N9005 running Lollipop 5.0

Hi,
I tried to install CWM on my rooted Note 3 N9005 with the latest 5.0 updates and the default recovery kept overwriting the custom. So I followed the advice on an article to delete the files [/system/recovery-from-boot.p] [/system/etc/install-recovery.sh] an this made my phone to fall in a loop, booting and trying to find these files then rebooting and so on...
I then had no choice but to load the stock ROM via ODIN which fixed the loop.
Is there anyway to install a custom recovery on a Note 3 running 5.0 - I want to do this in order to continue and install a custom ROM.
Thanks in advance for the answers!!
Don't use cwm as it has not been updated for a long time. Download the latest tar version of twrp for your phone.
Open Odin, uncheck everything except f.reset time, flash twrp, when you see the word "reset" in the status window, remove the USB cable from the phone, remove the battery, wait about 5 seconds, replace battery, use button combination to boot into recovery.
Thank you!!
What did the trick was that I quickly removed the battery and went to recovery mode. Even with "Auto Reboot" deselected the phone rebooted so if I left it it would have overwritten again the custom recovery.
Just a quick note to help others... anyone trying to flash Darklord or Phronesis ROM... USE TWRP v.2.8.0 and not the latest. The latest version for some reason won't install the ROMs.
thanx this wad so heapful .
:fingers-crossed::good:
abod7070 said:
:fingers-crossed::good:
Click to expand...
Click to collapse
Could be a year out of date and in some respects it is .
KEY is roms with AROMA installer will not work above 2.8 TWRP .

Sm-n910s twrp

I've tried every way possible to install TWRP on Sm-N910S via odin or flashify just get stuck on boot logo upon booting. Anybody successfully flash twrp and boot please advice me how thanks
irul.monster said:
I've tried every way possible to install TWRP on Sm-N910S via odin or flashify just get stuck on boot logo upon booting. Anybody successfully flash twrp and boot please advice me how thanks
Click to expand...
Click to collapse
I have the same phone. It took me a long time to get a twrp file that worked. Also I am using a custom rom called Nemisis Refined with the Prime kernel and I love my phone. There is a different kernel you can you use too but I haven't tried it yet its called Spacelemon.
Root: http://www.theandroidsoul.com/root-galaxy-note-4-sm-n910s-using-cf-auto-root/
Recovery: Follow either of these links for TWRP:
https://forum.xda-developers.com/note-4/development/twrp-2-8-1-2-recovery-note-4-sm-n910c-t2977933
http://rootmygalaxy.net/twrp-recovery-for-galaxy-note-4-marshmallow/
ROM: https://forum.xda-developers.com/note-4/development/rom-nemesis-refined-v3-5-n7port-t3587637
when i install complety twrp n its reboot then its just reboot only it didn't show twrp recovery my android verson is 6 and mobile verson is sm-n910s korean
suraj260 said:
when i install complety twrp n its reboot then its just reboot only it didn't show twrp recovery my android verson is 6 and mobile verson is sm-n910s korean
Click to expand...
Click to collapse
find it here: https://forum.xda-developers.com/note-4/development/recovery-twrp-3-2-3-0-touch-recovery-t3836759
sm-n910s is trelteskt
thanks for the info , it helped me a lot ,
one note i need to mention , for those of you trying to flash it using odin , un-tick the auto reboot option in odin , because this will cause the phone to reboot normally , and this will remove the custom recovery ,
you just need to reboot is manually after flashing it, just remove the battery , then boot immediatelly to recovery mode by pressing power + home + volume up
if you do it correctly , custom recovery will install it self permanently on your phone ,

can't install twrp for xposed galaxy s4 sgh-i337m

I recently upgraded my phone software from 4.4.2 to 5.0.1 and i need to download xposed again and when i searched online it showed that i need to download twrp and i tried this method using adb
https://www.xda-developers.com/how-to-install-twrp/
but after entering the step 4 ,the command control just "showed a searching for device message" .
i had also tried via odin but recovery did'nt show up when i pressed volumeup+power+home . just a bunch of letters on the top right corner . Pls help me (i am a noob)
Forum for the 337m is here: https://forum.xda-developers.com/galaxy-s4-att
Use Odin to flash the tar version of TWRP.
could'nt boot into twrp recovery
audit13 said:
Forum for the 337m is here: https://forum.xda-developers.com/galaxy-s4-att
Use Odin to flash the tar version of TWRP.
Click to expand...
Click to collapse
i tried your method and decided to see if it was working properly and i followed the instruction for rooted devices in https://www.xda-developers.com/how-to-boot-to-recovery/
Not only it did'nt work now my phone is just displaying the samsung galaxy s4 logo with words on the top left corner that says
recovery booting. . . .
recovery is not seandroid enforcing
set warranty bit : recovery
i just also checked the twrp manager app https://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager
it shows "custom recovery not installed or not detected"
How did you flash TWRP? You confirmed that the model # of the phone is sgh-i337m?
I could never get the fastboot instructions in the original post to work since all Samsung phones (non-Google Play versions) I have used did not support fastboot commands.
audit13 said:
How did you flash TWRP? You confirmed that the model # of the phone is sgh-i337m?
I could never get the fastboot instructions in the original post to work since all Samsung phones (non-Google Play versions) I have used did not support fastboot commands.
Click to expand...
Click to collapse
I downloaded the .tar file from the team win website for the samsung galaxy s4 canada and i opened odin .
switched off my phone , put it in download mode (volume down+power+ home ,pressed volume up again for confirmation)
connected to computer , odin shows added , clicked AP selected the .tar file and clicked start without making any changes in the options tab . Phone restarts
Flashing TWRP with Odin on a phone running a stock ROM will replace the stock recovery; however, if auto reboot is selected in Odin, rebooting the phone after flashing TWRP will cause the stock recovery or overwrite TWRP and this is one reason some people uncheck auto reboot.
I suggest starting over by flashing the latest stock ROM from sammobile.com with Odin 3.07.
audit13 said:
Flashing TWRP with Odin on a phone running a stock ROM will replace the stock recovery; however, if auto reboot is selected in Odin, rebooting the phone after flashing TWRP will cause the stock recovery or overwrite TWRP and this is one reason some people uncheck auto reboot.
I suggest starting over by flashing the latest stock ROM from sammobile.com with Odin 3.07.
Click to expand...
Click to collapse
I have just flashed my phone with stock rom from sammobile , after that i put into download mode again and did'nt select the autoreboot . when it was completed i tried going into recovery mode without switching on my phone so i removed the battery and placed it again and pressed volume up+power+home and i still got the same things that showed up before .
Did you try flashing different versions of TWRP? I suggest starting with 2.87. You can then use TWRP itself to flash newer zip versions.
audit13 said:
Did you try flashing different versions of TWRP? I suggest starting with 2.87. You can then use TWRP itself to flash newer zip versions.
Click to expand...
Click to collapse
Thank you so much . It finally loaded twrp and i started with version 2.8.4.0 FYI .
That's great

Categories

Resources