Database Users

[Q] Unable to install CWM or TWRP on Note 3 after 4.4.2 update

So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!

There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.

It's impossibe to flash anything other than the leaked 4.4.2 stock because you flashed your bootloader to kitkat, no you MUST stay on sammy 4.4.2 till the devs found a solution for this. Thats why you have to read carefully be4 you flash.

silentvisitor said:
There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.
Click to expand...
Click to collapse
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?

sid8907 said:
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?
Click to expand...
Click to collapse
This one seems to be the only one working with 4.4.2 right now.

Possible solution
The way I can suggest is to create a little update.zip file with little updater-script to remove install-recovery.sh file from device (just one line needed).
Ok, I found a zip which I am attaching below. You(or anyone) may review the script before flashing.
Place this on your external (or internal) sdcard.
In ODIN don't check Auto reboot
Flash Recovery. Remove phone when it says PASS.
Remove battery. Start in Recovery mode by pressing buttons.
You should now be in new Recovery.
Flash that zip file.
Reboot.
You should be good.

The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.

I am out of ideas.
I would suggest you to wait for someone to come up with working solution. Being too adventurous with ODIN could brick your device.

sid8907 said:
The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.
Click to expand...
Click to collapse
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again

Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?

radicalisto said:
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again
Click to expand...
Click to collapse
Thanks!!

sid8907 said:
Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?
Click to expand...
Click to collapse
You may have to do a little reading but I believe CM11 is now working on the KK bootloader...

sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398

sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
jp.26 said:
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398
Click to expand...
Click to collapse
so.... yeah i just updated my bootloader to 4.4.2 and this drove me literally insane. ive been working on it for 4 hours now. i encountered so many problems with installing the bootloader. exact same problem as SID8907. i gotta tell you tho.... you worked some magic my friend. i tried almost everything. then i came across your link. i was like why not? so i flashed the img in odin..... anddddd :drumroll pleaseeeeee:: IT WORKED. ahhh....... so much frustration and the problem is solved!!! thank you so much JP.26 :good::laugh:

is there any word on how to fix this been looking for hours tmobile note beast dont want to put any roots down on my phone before i find a way to flash cm or a non bloated note rom would be nice.

I'll that I've managed is to root and flash twrp I found a way to turn cwm recovery into a tar file and flash through odin. But i just get into a boot loop with cwm due to the boot loader I presume but tarp works fine I just can't flash cm11. I get boot loop every time
Sent from my SM-N900T using XDA Premium 4 mobile app

im sorry but im confused here... does this all simply mean that there is not yet a working cwm for 4.4.2 yet? and that while we can root, there is no working recovery for this version?

I'm not sure myself tarp works but I can't flash cm11
Sent from my SM-N900T using Tapatalk

Phillz cwm Dev edition I think that's the name works its a themed touch cwm. This works great but still can't flash cm so gayyyy
Sent from my SM-N900T using Tapatalk

I was wondering what happened to the cmw too.
The modded cmw by Chenglu is the only one working that I know of.
Link to thread: http://forum.xda-developers.com/showthread.php?t=2454079

[Q] have i lost root forever ? help !

all.
I have an i9505 on 3 UK that has been rooted for over 6 months. I've been running the excellent TW based Echo Rom but wanted to try an ASOP rom but quickly wanted to revert.
I tried to restore my Nandroid but this failed and screwed up the phone (dont ask)so back to ODIN and i flashed back to stock 4.4.2 firmware for the UK via Sammobile (NG8)
Now back to square 1 so attempted to reroot with CF Autoroot again via ODIN. all show pass and i get the black screen on the phone with the red android logo and line stating stock recovery restored. I then used ODIN to flash Philz recovery again shown as Pass, however when i try to get into recovery i get some small white text on the bkack background that is there too briefly to read before the phone reboots as normal.
The Su superuser app is there but states the Su binary is outdated and the phone has no root access.
Ive read a few methods to get round this but they all seem to follow the same process ive tried a few times now.
The Rom for Echoe is auto root so id have thought if i could get to recovery somehow i could just flash this ?
Any one any views or have i screwed up for good ? .

You will be fine.
If you want to flash a custom rom anyway the shortest way would be to just flash the custom recovery. You don't need root for that.
Uncheck auto-reboot before you flash the recovery and it should work.

Lennyz1988 said:
You will be fine.
If you want to flash a custom rom anyway the shortest way would be to just flash the custom recovery. You don't need root for that.
Uncheck auto-reboot before you flash the recovery and it should work.
Click to expand...
Click to collapse
so i reflashed Philz recovery and unchecked auto reboot. This then gives me PASS in ODIN. I guess then i unplug and try and activate recovery - but still nothing...it just boots up normally ?

robinta said:
so i reflashed Philz recovery and unchecked auto reboot. This then gives me PASS in ODIN. I guess then i unplug and try and activate recovery - but still nothing...it just boots up normally ?
Click to expand...
Click to collapse
What is the model descriped when you are in download mode?
What is the exact version of Philz you are trying to flash?

Lennyz1988 said:
What is the model descriped when you are in download mode?
What is the exact version of Philz you are trying to flash?
Click to expand...
Click to collapse
GTI9505...(Bootloader i9505xxegng8)
Originally I tried philz_touch_5.15.8-i9505.tar.md5
and then updated to philz_touch_6.23.9-i9505.tar.md5 with no avail.

Try redownloading it. If you say that if passes, then it should just work.
If it still fails then try TWRP. Uncheck auto-reboot before flashing.

Could it be connected to me flashing a generic unlocked UK firmware on a 3 UK handset ?

That's sorted it ! Flashed CWM recovery and am now running Echoes v28.
Thanks for the help. I was really panicking for a while.
I wont be changing roms for a while but I guess if I did I won't lose root ?

Stuck in a never-ending bootloop after trying TWRP for SM N9005

My phone is a Samsung Note 3 SM-9005, currently it's stuck in an infinite bootloop even after removing the battery for an hour.
I get this message:
RECOVERY BOOTING ...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
... along with the Samsung SM-N9005 logo, a couple of beeps/buzzes and then it repeats ad infinitum.
Here's what I did over the last day to get to this sorry state of affairs:
1. Upgraded from Android 4.3 (the original operating system) to 5.0 using the Samsung N9005XXUGBOA5 ROM with Odin 3.12. This worked fine but the phone lost root.
2. I rooted the phone again using Odin and Chainfire Auto-Root. All good so far.
3. I installed TWRP (the official TWRP App 1.5, going by my records)
4. I flashed the latest custom recovery which would have been 3.0.x and this seemed to be fine. So far no problems.
5. I then got ideas above my lowly station, apparently. I wanted to flash one of the newer ROMs: [Rom][N7 Port][12.12.2016] [Multi-DPI] Phronesis Rom N7 v4.1 Feature Rich & Smooth
https://forum.xda-developers.com/ga...m-phronesis-mm-rom-v1-0-feature-rich-t3463244
6. In the instructions, it said to use TWRP recovery version 2.8.7. I found that and flashed it. (Yes, it was for the Samsung SM N9005).
7. I rebooted into recovery mode to make a backup with that 2.8.7 version.
8. Now I'm stuck in boot loop hell with ...
RECOVERY BOOTING ...
RECOVERY IS NOT SEANDROID ENFORCING
Set Warranty Bit : recovery
... with the Samsung SM-N9005 logo, a couple of beeps/buzzes and so on (as stated above).
I've tried leaving the battery out for an extended period and this hasn't worked. The phone never gets to the stage where I can talk to it with Odin or get any kind of menu. Is the phone truly bricked now?
If so, was it a critical error to go from the 3.0.x TWRP recovery back to 2.8.7 for the purposes of this custom ROM upgrade?
If not, what can be done to regain control of the phone?
This is obviously an older phone as I've had it for about 3 years now, but I'd love to get it working again if possible. I really loved it and was planning to use it for a couple more years (hence the upgrade path I've explained above).

Can you boot into download mode? I suspect you flash the 4.3 version of twrp, you need a 4.4 version. This one https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.img.tar.html
Boot into download mode and flash it with odin.

I suggest flashing the latest stock ROM, flash the latest tar version of twrp with Odin, root with supersu.zip in twrp.

Stonedead, you were right on the money. I did what you suggested (Download mode) and that different TWRP file, and it worked.
Thanks so much.
Thanks audit13 also, although I didn't need to go that far to undo my mistake.

I got the same problem with my note 3. Thank you for the solution. Now how do I exactly get TWRP working on my phone. It is already rooted.

See TWRP thread.
Basics flash twrp tar through odin

Root is not needed to install the tar version of TWRP with Odin.

Thanks. Managed to get twrp working now. Also installed the note 8 Rom

Hi ok im having the same problem kinda follow the installation as posted,so i have note 3 sm-n9005 stock rom,root and replaced twrp 4.3 for 4.4 to install phronesis n7 v7 for note 3 followed all instructed then rebooted went to samsung boot then booted to twrp recovery ive been on it all day thinking what da hell ive done wrong?can someone instruct me of what i did or didnt do or have i completely mess stuff up?cheers anyone.

instructions .
Boot into recovery (say TWRP 2.8.7.0)

JJEgan said:
instructions .
Boot into recovery (say TWRP 2.8.7.0)
Click to expand...
Click to collapse
Sorry jjegan not following?it already reboots into twrp recovery after the galaxy note 3 logo appears for 20 seconds?I have read and followed threads that have same or similar problems but no avail im am totally lost and from reading this rom it sounds great if I can get there that is,so please simple instructions would be very helpful as I'm still learning very sorry for being dumb.

This rom
phronesis n7 v7 for note 3
all Aroma roms require TWRP 2.8.7 and not newer versions .As posted multiple times in the thread .
Search results for query: TWRP
forum.xda-developers.com

JJEgan said:
This rom
phronesis n7 v7 for note 3
all Aroma roms require TWRP 2.8.7 and not newer versions .As posted multiple times in the thread .
Search results for query: TWRP
forum.xda-developers.com
Click to expand...
Click to collapse
Hi JJEgan,thank you for the reply back much appreciated for your time so far,so do you mean twrp-2.8.7.0-hlte-eu.tar file?and not twrp 2.8.7.0-hlte-4.4 img.tar file?that's the one I am using to flash the rom with and having problems with.

Hi there again ok im so confused not sure which one,there are so many of the 2.8.7.0 versions with 4.3 or 4.4-img.tar im not sure if im downloading 4.4 or 4.3 as im still a noob and love tech,I have read threads upon this rom problems still can't get the grasp of the simple twrp version I have lte au version android 5,and when I read 2.8.7.0 im think is it 4.4 4.3 or just 2.8.7.0 tar file?I'm following the installation up into the problem of not booting up in stays In galaxy note 3 boot and I have removed the battery 5mi z replaced then recovery and factory reset then it does the same again and I have tried 3 times waited longer each time im thinking maybe go back to stock I don't think my phone is agreeing with me,jjEgan thanks for the info amd time im sorry if annoy you with a simple installation to you,still I have read and grasp the concept of twrp installer version yeah??

Only use 2.8.70 as said later versions wont flash that rom.
2.8.7.0 TAR flashed through Odin .

JJEgan said:
Only use 2.8.70 as said later versions wont flash that rom.
2.8.7.0 TAR flashed through Odin .
Click to expand...
Click to collapse
Thanks for the reply JJEgan,no I have finally fix the problem solution start over fresh instalments installed stock,flash twrp 4.4, flashd supersu threw twrp,wiped 3x install,instead of rebooting threw Aroma rebooted system threw twrp it loaded first go,thanks for the threads I took bits n pieces frm each threaded problems,cheers JJEgan love the version rom,one more thing what kernel would be better or what would your choice be cheers

[problem] sm-a700fd - cant flash rom

Hello,
I have a SM-A700FD. Some time ago I installed a ROM from xda (https://forum.xda-developers.com/samsung-a-series/development/rom-t3462703) The ROM ported from c7.
Now I am trying to go back to the stock ROM, but I just can not flash any rom.
Some reasons:
1. The PC doesn't recognize the phone (neither download mode, neither recovery, neither with a ROM). I tried in 4 different PCs;
2. I've got the recovery TWRP. I can flash the ROM, but the phone is stock in the boot screen.
3. Without the connection between the phone and the PC I just cant use the ODIN. Then I cannot flash again the stock ROM.
4. I had success flashing the CM 12.1 (UNNOFICIAL, but the ROM is old and full of bugs). Neither the resurrection rom, neither stock works on my phone.
5. The phone goes to download mode and recovery mode. My custom recovery is a TWRP 3.0.2-0.
Then I tried many ROMS (AOSP and stock, flashing by recovery) and all of them stops on boot logo.
Anyone got any suggestion?
Thanks.
Regards.
GF

gabrielfabris said:
Hello,
I have a SM-A700FD. Some time ago I installed a ROM from xda (https://forum.xda-developers.com/samsung-a-series/development/rom-t3462703) The ROM ported from c7.
Now I am trying to go back to the stock ROM, but I just can not flash any rom.
Some reasons:
1. The PC doesn't recognize the phone (neither download mode, neither recovery, neither with a ROM). I tried in 4 different PCs;
2. I've got the recovery TWRP. I can flash the ROM, but the phone is stock in the boot screen.
3. Without the connection between the phone and the PC I just cant use the ODIN. Then I cannot flash again the stock ROM.
4. I had success flashing the CM 12.1 (UNNOFICIAL, but the ROM is old and full of bugs). Neither the resurrection rom, neither stock works on my phone.
5. The phone goes to download mode and recovery mode. My custom recovery is a TWRP 3.0.2-0.
Then I tried many ROMS (AOSP and stock, flashing by recovery) and all of them stops on boot logo.
Anyone got any suggestion?
Thanks.
Regards.
GF
Click to expand...
Click to collapse
Please answer the following questions so i can help you:
1- What is your Windows version? x86 or x64?
2- Do you have your original ROM in hand? (https://www.sammobile.com/firmwares/database/SM-A700FD/)
3- Did you Install the latest version of Samsung Smart Switch application on your PC? (http://www.samsung.com/us/support/smart-switch-support/#!/)
4- Which version of ODIN do you have? (http://dl.sammobile.com/Odin3-v3.11.1.zip)
Please answer the mentioned questions and then we can go forward from that point.

Hi.
1. Its x64.
2. Yes. The Last version.
3. Yes. Got the last version.
4. Got the last version of odin. 3.11 also.
Thanks!
Regards

gabrielfabris said:
Hello,
I have a SM-A700FD. Some time ago I installed a ROM from xda (https://forum.xda-developers.com/samsung-a-series/development/rom-t3462703) The ROM ported from c7.
Now I am trying to go back to the stock ROM, but I just can not flash any rom.
Some reasons:
1. The PC doesn't recognize the phone (neither download mode, neither recovery, neither with a ROM). I tried in 4 different PCs;
2. I've got the recovery TWRP. I can flash the ROM, but the phone is stock in the boot screen.
3. Without the connection between the phone and the PC I just cant use the ODIN. Then I cannot flash again the stock ROM.
4. I had success flashing the CM 12.1 (UNNOFICIAL, but the ROM is old and full of bugs). Neither the resurrection rom, neither stock works on my phone.
5. The phone goes to download mode and recovery mode. My custom recovery is a TWRP 3.0.2-0.
Then I tried many ROMS (AOSP and stock, flashing by recovery) and all of them stops on boot logo.
Anyone got any suggestion?
Thanks.
Regards.
GF
Click to expand...
Click to collapse
You need to wipe your data partition. AOSP/CM based roms and stock roms do not have compatible DATA partitions.

The rom I installed wasnt aosp. Made the wipe already... Nothing changes.

gabrielfabris said:
The rom I installed wasnt aosp. Made the wipe already... Nothing changes.
Click to expand...
Click to collapse
If you don't have a hardware problem then the procedure below should restore the device to a bootable state.
Wipe data
Install stock with odin
Wait at least 10 mins for boot to complete.

Well. Tried but, as I said, my pc (tried in até least 4 different PCs) doesnt recognize my cellphone.
Thats not hardware. It appeared just when I tried tô change the rom.
Srry.

gabrielfabris said:
Hi.
1. Its x64.
2. Yes. The Last version.
3. Yes. Got the last version.
4. Got the last version of odin. 3.11 also.
Thanks!
Regards
Click to expand...
Click to collapse
1- Load the following Samsung USB drivers for Windows:
http://samsungusbdriver.com/download/samsung-driver-v1-5-61-0
2- Install the drivers while you mobile is disconnected.
3- Put your mobile into download mode. (Vol Down + Power)
4- Run Odin and then connect your mobile after (It has to be recognized by assigning you a port number COMx in Odin under ID:COM).
5- Make sure that only F.Reset Time and Auto Reboot are checked under the ODIN Options tab (IMPORTANT: NOTHING ELSE IS CHECKED)
6- Select you Stock ROM in the AP tab of Odin and as soon as it is loaded hit Start.
7- The phone will restart and wait for few minutes till the Stock ROM builds its caches, optimizes its apps and start.
Hope this helps you restore your stock ROM and tell me how it went
Regards

tghandour said:
1- Load the following Samsung USB drivers for Windows:
http://samsungusbdriver.com/download/samsung-driver-v1-5-61-0
2- Install the drivers while you mobile is disconnected.
3- Put your mobile into download mode. (Vol Down + Power)
4- Run Odin and then connect your mobile after (It has to be recognized by assigning you a port number COMx in Odin under ID:COM).
5- Make sure that only F.Reset Time and Auto Reboot are checked under the ODIN Options tab (IMPORTANT: NOTHING ELSE IS CHECKED)
6- Select you Stock ROM in the AP tab of Odin and as soon as it is loaded hit Start.
7- The phone will restart and wait for few minutes till the Stock ROM builds its caches, optimizes its apps and start.
Hope this helps you restore your stock ROM and tell me how it went
Regards
Click to expand...
Click to collapse
Hi.
I made the procedure you said. First of all, Thanks.
The odin doesn't recognize the Phone.
The rom I installed in the first moment was Port from c7. I got that messages "warranty bit kernel" "Keynes is not seandroid".
Maybe something went wrong in that place.

gabrielfabris said:
Hi.
I made the procedure you said. First of all, Thanks.
The odin doesn't recognize the Phone.
The rom I installed in the first moment was Port from c7. I got that messages "warranty bit kernel" "Keynes is not seandroid".
Maybe something went wrong in that place.
Click to expand...
Click to collapse
Ok then it seems you have a bootloader problem. I suggest you unzip your A700FD stock ROM tar.md5 file by deleting the md5 extension (Rename SM-A700FD-ROM.tar.md5 to SM-FD700-ROM.tar), then unzip the ROM.tar file using WinRAR or 7Zip. Now you will have all the ROM partitions files including boot.img and system.img files as well as others. I suggest you place both files on your external SD Card via the PC (using a card reader) and then flash both from within TWRP (You can change in TWRP to flash img files instead of zip files) while formatting the data and cache partitions and reboot.
I believe that way you can restore the boot.img and system.img partitions, correct any corruption in the boot and system partitions and can flash the whole ROM again using ODIN or flash any other custom ROM (non ported) as soon as your mobile gets recognized by your PC.
Let me know how it went.. Good luck

Thanks a lot. I did not think in that way. I'll try and then ill post here if that worked. Thanks a lot.
Regards
Gabriel Fabris

Note 3 SM-N9005, Can't Boot to recovery.

My N9005 is unable to boot into recovery, whenever i try it will start to boot and then just restart itself.
When trying to reboot normally the cyanogenmod loading screen is very laggy and it just reboots after a while.
occasionally it will start normally (1/20 tries).
I tried to reflash twrp with odin but it makes no difference.
Cyanogenmod version 12.1-20161016-NIGHTLY-hlte.
Any help is highly appreciated.

Flash stock rom via Odin to get a working phone.
Or restore your Nandroid.

Reflashed stock rom and phone was working perfectly. stock recovery was also working.
Then rooted with CF-autoroot and it went well.
Then i tried to install TWRP custom recovery and it still won't let me boot to recovery.
Android version is 5.0 if that matters?
Edit: Managed to make it work with another version

Did you find a solution? I have thee same issue
Thanks

HELP with n9005 custom recovery
HI i have the same problem with n9005 i have rooted but whenever i flash twrp or cwm i end up with no recovery..phone shows set warranty but recovery msg then reboot to system...any help?

CWM no longer used .
You are probably flashing the wrong TWRP .

No i have verified the info and I have the correct twrp but still can't get it to run

same here
good evening everyone,
I come back to this forum because I have this beautiful phone that I can not update the android version 9.
On the recovery I can not go beyond the version 2.8.7.0, if I try to put a more recent version it remains in bootloop even if I restart manually.
To know that I have the HTLE model, the only thing is that I replaced the screen with a Chinese model.
then I put the original version back via odin and it goes back to version 5.
I am completely desapointed, I do not know what to do to put it under android 8+ !!!!
PLEASE HELP