Database Users

Camera Doesnt Load (tried upgrading the rom)

For some reason my camera wont load. It goes to open the camera, does that funky thing with the backlight and then goes black. No picture, no controls.
It freezes and the only way to get it back is to soft reset it.
Ive tried a hard reset, same thing, tried updating the rom and its still the same.
Is there any hope for my poor little mda, just paid out for a brand new cover too

after some playing its loaded the controls. Still dont get any view from the camera.
Ive taken it apart and checked the ribbon cable is fitted properly and it is.
Somebody please help

camera has now fixed itself. For how long i dont know, very very strange!

HTC Polaris 200 (Orbit 2) camera not working

Hello all,
I've been reading this forum for a while but only now decided to ask for help.
I am one of those unfortunate htc users who got the "camera problem".
I've bought my Oribit2 of ebay and first it was working fine with all the functions etc. Then i started upgrading it, flashed hardspl, new ROMs, radios... at some point camera stopped working. Not sure exactly when, cause i have tried several different ROMs and radios before even noticing that something was wrong. At that point i had c_shekhar's ROM installed.
I started reading more on the problem and tried to flash original ROM/radio or other ROMS and radios but nothing helped. Camera was still not working with error "Unable to capture photo. Unable to get frame data from camera device." or something like that and VERY slow response in camera.exe.
I've seen same problem in many different threads on different forums, mostly it's been an issue with incompatible Radios and was fixed by reflashing but also, in many cases ppl had the same as i do - camera not working and flashing doesn't help.
So, some solutions appeared:
- taking out battery for 15 mins, fixed camera for some ppl.
- installing Nadavi camera fix and/or uninstalling afterwards
- deleting all camera.* files from windows and installing Nadavi camera etc...
Well, i've tried them all. Nothing worked. The trick with taking out battery partially worked once: i've flashed original O2 WM 6.0 and took out battery for about 30-40 mins. After putting it back - voila camera working as it should be, no lag, no error. I'm happy! NOT.
Of course i immediately decided to flash some better ROM cause original is crap. After flashing - camera dead again and this time even taking out batter for more then an hour didn't do anything.
Trying trick with nadavi camera fix proved to be partially working or at least a good step in right direction:
lag went away, i could operate the camera program, switch from back to front camera(which was working fine btw) and even capture videos...
well... kind of. In preview the image is all fuzzy, just coloured line and noise, impossible to see the image, only some parts of it.
But it was clear that somehow, when using back camera, the image was a mix of a rear and front cameras! I mean i can't see clear picture,
but if i move my hand near one of the cameras i see changes in image(it's still mostly coloured noise).
All this is weird isn't it?
After evaluating everything, it makes me think that it's not a hardware problem, but really a configuration problem.
Looks like there is small flash memory in camera device, or some another way to keep camera initialization and it does not depends on radio or ROM.
Now, seeing that some ppl were able to fix the problem while installing original rom, or installing Nadavi camera fix or both, makes me think that under some
specific conditions these internal camera settings can be reinitialized.
While browsing net, looking for answer, i have found this :
Some of us had problems with Htc devices recognizing the on board camera after installing new ROM's.
It has been my technical opinion and observance that this problem can accrue when you manually put the devices into bootloader mode and don't press the camera and power buttons together along with the reset button correctly.
Once this damage is done you will have to reinstall the ROM radio files via uploading a manufacturer ROM to your device that has the radio ROM packaged along with it e.g. "HTC sprint beta ROM".
To avoid this I suggest always letting your PC force your device into bootloader mode. Because even the best of us might not mash the keys just right causing your ppc to forget all of it's configured camera associations.
Click to expand...
Click to collapse
HERE
http://www.howardforums.com/showthread.php?threadid=1396410
Well, this guy seems to agree with me that it's camera settings problem and there must be the way to fix this.
Well, again, i have tried installing original ROM and radio again, with no luck(even tried different combinations of nadavi fix , taking out battery etc...)
So, now, i believe, what we need is someone who knows a great deal about programming mobile devices and drivers for camera in particular to try and
produce some kind of a software that can reinitialize these camera settings(this is if this theory is correct).
Since my phone was bought off ebay, i have no guarantee and cannot send it back for repairs.
Does anyone know the right person who can do this? Or maybe some other solution to fix the camera?

I'm in the same situation. I was using udk 4 or possibly 5. One day I noticed the camera didn't work. I still had an icon for in under programs and the default button turned it on. Since then I have tried newer roms and several radio roms. I have no icon for camera under programs and the camera button on the phone just loads the camera album.
Can anybody help us?
Many Thanks
Dan

The same thing happen to me as for you guys.
The only thing helped as I tried new radio roms and still was not working.
So I tried radio Murata - 1.58.21.23. And now camera works perfectly again!!
You can search here and you will find this radio on this forum.
cheers
Andrew

I have tried that radio.

the same story. radio is murata
will try to go this hell route - nadavi camera and stuff

Ive been on this all day now. Nothing I have tried has made it work. I'm on the original rom from o2 now and it's going back to the shop tomorrow.
Can they tell if i've put 3rd party roms on the phone? If so is there anything I can do to "re lock" it?
Cheers
Dan

Maniakaz said:
The same thing happen to me as for you guys.
The only thing helped as I tried new radio roms and still was not working.
So I tried radio Murata - 1.58.21.23. And now camera works perfectly again!!
You can search here and you will find this radio on this forum.
cheers
Andrew
Click to expand...
Click to collapse
not in all cases

i have a camera problem too...what is the answer?

Same problem for me, Camera not working any more
I was using M-Amine 2 ROM and camera started malfunctioning, (the first days was alleatory, and I arrived to fix it restarting camera or taking pictures two or three times, until finally the problem becomes definitif...)
I tested other roms (c_shekar, 3VLIT, Nadavi fix, and other radios...even original ROM....come back to c_shekar....with some small changes, but finally retour the same problem "unable to capture frame...".
Today I have reinstaled again Original latest French ROM, at the begining camera doesn´t worked, but suddenly It has come back again. Up to now still working after many resets and tests. I will keep you informed, I plan to come back to c_shekar, after some days of testing with original ROM.

it can be fixed with original rom
find my other post how to get ROM's with needed language.
b.r.
Alexandar

I have an O2 Orbit 2 as well.
I recently noticed that my camera isn't working anymore.
About 1 month ago I installed Core Player 1.2.4 and since then I had a lot of issues with the card. Folders starting disappearing, corrupted SD etc. Sometimes only some recent folders disappear.
However, most recently I discovered that the camera does not work anymore. Pressing the snapshot button doesn't start the camera. While the buttons do light up when the camera button is pressed (suggesting a software issue) the camera does not start. If I go into the Programs folder and start Camera, it starts. But when I press the camera button to take a picture, it goes upto the point that it makes the focus sound, the two framing aids (that look like a split square) turn green but that's it. No photo is taken. Camera however seem to work, everything looks ok through the camera but it just doesn't take photos/movies anymore.
I haven't installed/upgraded anything, I have the original rom.
I have tried to take out the battery for 30+ mins but the same issue happens.
It definitely looks like a software issue, either by a software that corrupted files (I suspect Core Player) and/or flash corruption issue (however I haven't got any software to tinker with the flash and haven't tried boot mode or whatever, just normal on/off).
Small update: I just noticed that altering the camera settings to "Half press" instead the "Full press" makes the camera take pictures.
However, returning again to "Full press" the camera doesn't take pictures again.
So a temporary fix is to set to "Half press" but even so, the camera application does not start when I press the camera button.
Can anyone please help?

hi, I have an old Polaris and 3 days ago upgrading from WM 6 to WM 6.1, causing the both cameras (front and back) to not respond although the screen still shows the numbers and stuff on touch screen that shows cameras are working fine, BUT pointing both cameras anywhere doesn't change the black view that's been displayed since the camera is turned on. weird. but when pressing the camera button, the picture taken is properly shown. I tried both camera (front and back), both produces normal photograph, but why the black screen?!
on top of that after the upgrade, touch screen has turn rigid that it's very hard to type. I have to play with the angle of touching the pen to the screen or else, the screen will just get stuck with whatever it was doing before.
any solution? please advise thanks.

Camera working but no Picture Monitor Screen
This may help you Bulukaki
I have a HTC P3650 allready with the WM6.1 upgrade
I downloaded today the factory update for picture quality, "Hot fix for Touch Cruise photo quality issue" from the HTC download site
After this upgrade , I was no longer able to monitor the picture of the camera on the screen. Just a black screen but with all the camera functions.
The camera was still able to take a picture, the picture showed up only after exposure on the screen. Similar to BULUKAKI`s problem
So my picture quality was not that bad prior to the photo quality upgrade and I removed the update from settings/system/remove programs and did a soft reset and the camera was again functioning as it should. Having said that, you may check wether or not the "Hot fix for Touch Cruise photo quality issue" was allready installed prior to your WM6.1 upgrade.
Maybe simply uninstall "Hot fix for Touch Cruise photo quality issue" will do the trick
Hope this helps

HD2 Touch Screen Not Responding

Hi Guys i hope somebody who knows about capacitive touch screens can help me! I have taken my HD2 apart to fix a smashed camera lense. On removing the back cover i used a small screwdriver to prise off the back case and unclip it all round. It came off with no problem, i fixed the camera and put it back together. When i turned the device back on the touch screen isn't responding to my finger on any screen. Like i turned the touch screen off! The hard buttons still wok but nothing from the screen. Nothing looks damaged (I.e the glass isn't smashed). I seem to think i might have damaged something when prising the cover off with the screwdriver. Please, any suggestions would be really helpful!!!

Can anybody out there help with this? I am currently without a phone :-(

I have exactly the same problem, but it happened from nowhere. I didnot unscrew anything. Please Help

Check the flex cable.. this part are very delicate.
is this :
http://img.diytrade.com/cdimg/92507...creen_Full_LCD_for_HTC_Touch_HD2_HD_2_LEO.jpg

same problem
ive got the same problem, mine just stopped working, i performed a soft and hard reset, removed the battery still nothing. it worked for a moment but once locked it stopped working again, only the hard buttons.

same problem but it works on and off. basically the screen will respond until the phone is put into hibernate. the after that id have to push the phone button and end button back and forth until it responds

Same Issue independant of ROM
Same issue here.
Funny thing is it started a week or two ago randomly out of the blue.
Same scenario:
lock the phone can't get touchscreen to respond for unlock
Judging by these posts everyone started seeing this about the same time, maybe it's a software issue or background app .
Help!

I have same problem. It can work for a couple of hours or in 1-2 days then just stop responding, almost every time when in hibernate. Lets just hope it's not hardware failure.

This started happening to me this morning. Out of 50 tries, managed to unlock the phone three times only. This happened out of the blue, right after i removed my phone from the charger.
Have soft reset, hard reset, reflashed ROM, but the issue still remains.
I really really hope this is not a hardware issue.
Does anyone out there know how to solve this? My phone is virtually unusable right now...

Same problem here, I've been testing for about 2,5 months now and today I've sent mine back to HTC . I think it's a hardware problem, tried everything from hard resetting to reflashing. When I press the HTC logo and keep it pressed the screen does respond again. Conclusion: hardware problem.

dio62000 said:
Same problem here, I've been testing for about 2,5 months now and today I've sent mine back to HTC . I think it's a hardware problem, tried everything from hard resetting to reflashing. When I press the HTC logo and keep it pressed the screen does respond again. Conclusion: hardware problem.
Click to expand...
Click to collapse
You're probably right.
I've also tried everything. But kind of strange that if I lock when not on home tab it seems to work. And the screen, almost always, reacts as it should as long as I just dont' lock it.

I just started to get this issue. touch screen works fine until it hibernates. reflashed, still happens. found this in my search:
htcphones.net/htc-hd2-problems-with-touchscreen/

just got off the phone with tmo. they are sending me a new one.

Yeah, it happened to me as well. I opened a new thread like a month ago explaining the problem: http://forum.xda-developers.com/showthread.php?t=710282&styleid=15
and I contributed in another one concerning the same issue here: http://forum.xda-developers.com/showthread.php?t=708530
Summing all up, it ain't caused by a software or a ROM of some kind (at least in my case) because soft and hard resets didn't solve it nor did the flash of a stock ROM. The most probable cause is a digitizer (touchscreen) defect that appears randomly and totally out of the blue. The only thing to do in my opinion is to send the phone in for repair, which I did. It came back with a check mark on "calibrated screen" checkbox. As of now phone's working fine and I hope they solved it even though I read of other people who have had their leo's screens completely replaced..
A curious side note: htc care reset to zero my phone's call duration timers..

I'm not sure if it's the screen. In my case I think it's the connector from the screen to the motherboard, because pressing the housing seems to help.
But let's see if HTC is able to repair it, I hope they are, because the problem is so random they might not even see it

After losing functionality on my touch screen for a week, finally decided to send it in. Took the trouble to revert my HSPL to original and Stock Rom.
Repair should take about a week. Now I'm stuck with an ancient Nokia 6230i for this week. I feel so lost without my ppc. Have had one for as long as I can remember.
Hopefully the phone comes back okay...

I've had so much problem with the screen not responding so I did all backup then reflashed, hard reset to put the device back to stock. Did this during the weekend, I even fired up my old iphone 3g to have as backup phone.
All set today to go to the store and have it repared under warranty.
But since Sunday evening it works perfect. I've been testing it a lot and the screen has not stop responding even once.
This might be just temporarily but does anyone else experienced something like this?

Mine sometimes worked well for hours... days... but eventually the problem came back.

Mine died on me when I was actually out of the country (stuck in Vietnam without a phone). It would work for 5 minutes, then stop for hours. I would have to switch my phone on and off for a couple hundred times before it worked for another 5 minutes...
Got so tired of it that i sent back my HD2 for warranty repair. Expect it to be back tomorrow (or Friday at the latest). Hope there's no further problems with it.

I hate to say it, but the HD2 is known for its highly defective touchscreen. Even when it's working, a lot of people experience strange and bothering events, such as the touchscreen "touching" itself, a very high/very low screen sensitivity all of a sudden, the tilting of the screen to one of the four corners of the device and so on and so forth.
With a device so expensive one would expect it to work flawlessly. Seems to me that HTC doesn't think the way we do...

Front Camera Issue's (white screen- no errors)

Hello all,
Every time I open my camera and toggle front face camera all it shows is a white screen. The options are all there and the rear facing camera works fine. I have googled the issue and cant seem to find anyone with the same issue just people who have black screens or errors saying "camera fail". Here is what I have tried so far:
Clear camera cache and data then reboot- Didnt Work
Rebooted into safe mode -Didnt Work
Wiped the Cache Partition -Didnt Work
Factory reset- Didnt Work
Bought a new camera module and installed it. I then repeated the steps above -Didnt Work
Any ideas why its not working? or suggestions on what to do next?
I do remeber the last app I installed before the camera when bad was snapchat. When I uninstalled it and reinstalled it it did nothing for the camera. I also did the factory reset and the camera didnt work before I added snapchat again.
*UPDATE- I took the phone apart and removed the front camera and reassembled it without it and the phone shows a black screen. When I added the camera back it went back to the white screen. Software issue?
Samsung Galaxy s4 SPH-L720 rooted to AT&T network

maybe there is some hardware/IC in the motherboard had problem.
Sent from my SPH-L720 using XDA Free mobile app

iamdofus said:
maybe there is some hardware/IC in the motherboard had problem.
Sent from my SPH-L720 using XDA Free mobile app
Click to expand...
Click to collapse
I took the phone apart and removed the front camera and reassembled it without it and the phone shows a black screen. When I added the camera back it went back to the white screen. Seems like the phone is making some kind of communication with the camera.

My screen just dies, please help!

Hello everyone. I just bought the OnePlus 8 Pro, set it up, used it a little and then opened the camera, and changed to selfie mode. Suddenly the screen turned green and turned off. Since then I cannot boot my phone and i see green flashes on my screen and nothing works. I can still hear the phone works (Lock screen noises and vibrations) but still can't see anything apart from green flashes every 5 seconds. I've tried to hard reset the phone a few times, but no luck, screen still flashes green.
Please tell me if there is something i can do to fix the issue, or the screen just died.

Why would you want to try and fix the issue? It sounds like a hardware failure and you should return your device. Sure it's a ****ty situation but these things happen.

patensas said:
Why would you want to try and fix the issue? It sounds like a hardware failure and you should return your device. Sure it's a ****ty situation but these things happen.
Click to expand...
Click to collapse
in my country its not that easy .... you need to send it few weeks to check the prob
and thats my only phone i use i cant send it and just bought it
maybe other opinion guys plz?

The only way to solve this is to RMA sadly. Definitely a hardware issue and needs to be replaced (if within the appropriate time) or repaired.

RMA. 100%

ok guys first of all i gave the phone to the company for check thx for your reply