Hay,
I already read the thread for CM13 on the LG G2 (d802). But actually I am kinda confused and I just want to go sure that I don't do anything wrong again. Currently I am using CM 12.1-20151114-NIGHTLY-d802 with Gapps. Today I wanted to update to the CM13 Release. I did what on the cyanogen site was written and flashed the CM13.zip and the gapps.zip, then wiped Dalvik and rebooted. Unfortunately i got a blackscreen and nothing happened. I rebooted into recovery and restored the CM12.1 backup I did before.
So if I understood the CM13 thread correctly, I do have to go back to LG G2 Stock ROM and update to Lollipop and then root and flash CM13. Or I do have to install another Bootstack(?), which is not recommended.
So what is this Bootstack and why isn't it recommended?
Thanks for your help!
Related
After a completely fresh install, along with gapps, I got past the LG logo, but was stuck at the bootanimation for several hours. It kept animating, but no progress was made. I tried with and without gapps. I am running TWRP 2.7.1.0 (dr87's version), and have fallen back onto Mahdi for now. I h ave a d800 (LG G2, AT&T variant). I was using the link from the official thread (houston.hostingsharedbox.com/roms/g2/d800/), and my zip was not corrupted.
tsunamical said:
After a completely fresh install, along with gapps, I got past the LG logo, but was stuck at the bootanimation for several hours. It kept animating, but no progress was made. I tried with and without gapps. I am running TWRP 2.7.1.0 (dr87's version), and have fallen back onto Mahdi for now. I h ave a d800 (LG G2, AT&T variant). I was using the link from the official thread (houston.hostingsharedbox.com/roms/g2/d800/), and my zip was not corrupted.
Click to expand...
Click to collapse
hello!
I think you need to clean everything and factory reset... I have the same problem since PA 4.4 final.
It's shame to factory reset and install everything all over again...
Hi do u know if lg g2 d802 is supported? I can't find where is the links and the instructions for installation
Hello, I had some issues with my LG G2 while attemping to flash a new rom, here's my problem:
I checked for the latest crDroid 6.x rom and the gapps, everything went fine, I flashed the rom with no problems at all and then continued with the gapps. But here's the problem, when I tried to boot it, nothing popped out from the display, just the LG logo, then it was completely black. After trying to install another custom rom (cm 13 nightly), nothing happened. Then, I tried to go back to my AICP rom. I had to use ADB installer since I didn't have any zips avaiable, but when I tried to install tk gapps (downloaded from the AICP forum), Error code: 20 came out. I did a research, and this looks weird, because that error only pops when the gapps are not compatible with the current rom, but clearly they were. Any ideas on how to fix this up?
Avrammm said:
Hello, I had some issues with my LG G2 while attemping to flash a new rom, here's my problem:
I checked for the latest crDroid 6.x rom and the gapps, everything went fine, I flashed the rom with no problems at all and then continued with the gapps. But here's the problem, when I tried to boot it, nothing popped out from the display, just the LG logo, then it was completely black. After trying to install another custom rom (cm 13 nightly), nothing happened. Then, I tried to go back to my AICP rom. I had to use ADB installer since I didn't have any zips avaiable, but when I tried to install tk gapps (downloaded from the AICP forum), Error code: 20 came out. I did a research, and this looks weird, because that error only pops when the gapps are not compatible with the current rom, but clearly they were. Any ideas on how to fix this up?
Click to expand...
Click to collapse
for your rom to boot you need hybrid bootstacks
wipe all/flash hybrid/ go to main menu/ then reboot into recovery from recovery/ once in recovery again proceed to flash rom and gapps.
use the one for your variant
http://forum.xda-developers.com/lg-g2/development/boot-g2-hybrid-bootstacks-t3183219
Hi. Can someone write down below with all links and info how to install official cm13 nightly on our Storm?
btw recovery says this device is crackling, rom is for kipper.
AFAIK crackling is swift and kipper is storm.
Can someone Help me?
OK cm13 installed, but i have problem with issufient storage when trying to install g-apps or c-apps anybody help me?
And how to revert back to COS 12.1.1?
i have to say i have no idea xD. i recently droped my lg g3 in a bucket of water. got it out stripped it, and hopefully it be okay xD. but if not i been looking at a wileyfox
aaanyway, reverting back! (im guessing here) you have your self twrp? or something installed on the device in order to flash gapps. i cant say as i dont have a phone if TWRP is something installable on the phone. but i would have suggested making a backup before you flashed p: AAAAANNNYWAY!
i would suggest doing a factory reset, swipe to wipe , and then flashing Cos 12 and its respected files to go back.
Flash stock recovery or nightly cm12.1 recovery
Wipe and flash stock rom from cyangogen os support site
bobslesbricoleurs said:
Flash stock recovery or nightly cm12.1 recovery
Wipe and flash stock rom from cyangogen os support site
Click to expand...
Click to collapse
Have a look at:
http://forum.cyanogenmod.org/forum/1212-wileyfox-storm-kipper/
Use a smaller set of GAPPS. Mini or less. as long as you can get the store working you can install any missing ones you want.
I have been using CM12.1 on an LG G2 D802 and decided to upgrade the device to CM 13 today. As the device was running the stock 4.4 ROM before I initially switched to CM 12.1, I figured it would already have the Kitkat bootloader installed and proceeded to download the latest CM 13 nightly from the CM page as well the stock OpenGapps package. I then booted into TWRP (v2.6.3.3), wiped system, dalvik, data and cache and then flashed the ROM and the Gapps package which worked just fine.
However, when I selected "reboot system", the screen went black. I turned the phone off by pressing the power button. turned it on again and found that the LG logo flashes up for less than 1 second, then the screen goes black again. Gladly, I am still able to boot into TWRP. I then searched the forums, decided to try the latest Lollipop bootstack from this thread and reflashed the ROM and the Gapps package, but the problem still persits.
I am now thinking if my seriously outdated TWRP version is causing the problem, but I hesitate to update that (as it is basically the only working thing on the phone right now) without making sure that it really could be the problem.
Do you have any tips for me what could be the problem and how I can fix the phone?
Thank you very much!
Any help is appreciated
lg g2 bricked
YassinTP said:
Any help is appreciated
Click to expand...
Click to collapse
bro does ur phone goes in download mode? if yes flash tot. if not i will solve ur issue through teamviewer. dont worry it will be solved.
YassinTP said:
Any help is appreciated
Click to expand...
Click to collapse
to boot into system you need hybrid bootstacks, and definitiverly need thermal twrp 2.8.7.3
you could either do both. download twrp and bootstaclks the hybrid ones.
first update twrp if you want. but i recomend as it has thermal to control heat during installations
once you in twrp. wipe all. then reboot into recovery from recovery.
flash hybrid bootstacks then again reboot into recovery from recovery, and when you in twrp flash rom it should boot.
just remeber to reboot into recovery each time you flash twrp ot hybrids to take effect.
Hello,
I have a lg g2 d800. I was trying to flash the latest cyanogenmod 13.0 snapshot. I was on cyanogenmod 12.1 the older june snapshot. I booted into recovery and stupidly did not make a backup because I am an idiot. I did a reset before I flashed the rom ( system, cache, dalvik). I flashed the rom and gapps and there were not any problems. I try to reboot the phone and it is just stuck in a boot loop. I have twrp installed. I can access twrp fine. I just need some tips on getting a different nightly or snapshot (I will probably use an older 12.1 snapshot) onto my phone to flash it.
Thanks in advance.