Related
Hi i have a problem. Yesterday my Prophet battery goes to 0%, when i back to the home I plug-in it to charger. The light-emitting diode start flashing, but i can't turn on my phone. After 8 hours connected to charger Prophet still won't work. DO you have any idea? Maybe this is battery problem?
PS. Sorry for my poor english.
same with me,my dopod 818 pro won't turn on after 2 month not use,i try to charge,but the led not light..its off..i have no idea witn this problem,please help me to solve.thanks
Same problem with my Prophet.
After 3 month of no use wont charge and wont go on, no light of chargin nothing.
Is the orange light on when it is plugged into power without battery???
Any one solve this problem????
Thank you
UPDATE
I open the battery and fill it with 3,5V directly on battery inner contacts for few minutes
( directly on battery contacts red + and black - and I control it with multimeter to see how the voltage rising up. )
After aprox 3 minutes I try to power it up.
AND IT WORKS!
I put it on charge and the orange light went on and strat charging the battery. The phone now works.
So it is the battery issue. ( Last night I put it on power over the night and nothing no charge at all, what a stupid system )
errhec said:
Same problem with my Prophet.
After 3 month of no use wont charge and wont go on, no light of chargin nothing.
Is the orange light on when it is plugged into power without battery???
Any one solve this problem????
Thank you
UPDATE
I open the battery and fill it with 3,5V directly on battery inner contacts for few minutes
( directly on battery contacts red + and black - and I control it with multimeter to see how the voltage rising up. )
After aprox 3 minutes I try to power it up.
AND IT WORKS!
I put it on charge and the orange light went on and strat charging the battery. The phone now works.
So it is the battery issue. ( Last night I put it on power over the night and nothing no charge at all, what a stupid system )
Click to expand...
Click to collapse
Oh.. great! do you know which pin of the battery is (+) and which pin is (-) pole? I want to charge the battery by a balance charger.
happened to me couple months ago
and i used desktop charger for 5 minutes directly on the battery
then plug it in and charged normally with usb connector
used the desktop charger on the first and last pins on the battery
Hello, i'm sorry, my english is bad. but i wanna help.
Now, before 1 week i have the same problem, my qtek s200 after update whit wm6.1. OK 1 month everything was ok, but after that /i don't now where i go wrong but no matter/ that my phone start stuck in bootloader. I let it one night on to see, maybe will turn,and at the morning he wont start, even the light wont start wen i put the carger on. I take one charger/from sony erricson/ cut cable, there are 2 cables, take off the battery of my pda, put directly cables from sony charger in to battery, black is minus, red is plus, but don't worry, there is no problem if you make mistake.Let it like that 1-2 hours, put battery back on pda and everything will be OK.Now in my case my ROM fu** up, i go to tree color screen/see more info how to do that/ and replace the ROM.and next time do not full dry the battery.Hope i help.
hi
i've got a problem with my battery
no matter how much i charge it , it is always stuck at 0 % and the moment i unplug my phone from wall charger it will give low battery beep and shuts down.
i left the phone charging for the whole night but to no vail
the battery is charging ok because while flashing a new rom there ain't no problem but after windows is loaded it will shut down after giving low battery beep.
i've tried multiple roms but same problem in all of them
My question is
"Is there any way to tweak the registry of windows as to not monitor the status of the battery or not to shut down automatically on 0% charge"
reply please
So the phone was really low, at 6% this morning. SO I put it on the wall charger. I saw the icon come up that it was charging and then put the phone down.
A while later I went back to the phone and saw that although the charger was plugged in to the wall and also plugged into the phone, it was NOT charging.
Using the phone I went to my contacts to check a phone number and then it turned off, due to no charge.
I plug it into the wall charger, the USB connected to the computer, as well as the car charger and here is what happens:
The top and bottom of the phone blink red for about 1-3 minutes.
Without pressing anything on the phone it automatically turns itself on, I see the Sony Ericsson boot screen, the Windows boot screen then my SPB Mobil Shell screen for about a second and then it turns off again showing and the blinking red light for about 1-3 minutes and then it starts the process all over again.
I think that a setting for Backlight/Power management was changed. As setting similar to "Only charge with usb", or "only charge when connected with ActiveSync" or somthing like that.
The problem is that I turned off the Active sync on the phone in order to conserve battery power so that I could look up the phone number from my contacts. And after I did that the phone shut off and I cannot change it, because it will not charge.
I do not have a different, charged, battery to try and do not think that I can find one easily.
Any suggestions?
Now when I see that the phone is re-booting(I see the SE logo), I use the stylus to to soft reset. It is obvious that there is some type of charge happening before it re-boots, , otherwise it would not re-boot. SO my theory is that by doing a soft rest between restarts, the battery will gain more of a charge each time. And possibly have enough of a charge so that I can go into my settings and see the backlight/ power settings have been changed.
So I took a battery from my old SE 902 phone and rigged it to work with my X2.
It booted up just fine. I was able to get into the menu for power settings. Nothig was changed however I did check the box "do not charge when connected to the computer" backed out of that screen and then went back into the screen and unchecked the box.
I powered down the phone and the screen went to the default charging battery meter.
I then put the proper battery in the phone and it was still blinking red. I saw it blink green for a few seconds, then I felt it vibrate, and then I saw the green battery meter. But after a few seconds it went back to blinking red and I could not see the battery meter again.
This seems to be happening intermittenly. As of right now there is a green blinking light and I see a dimmed battery meter.
Hopefully it will be fine, we shall see.
So it was charging for a while and now has stopped. I see the battery meeter, but there is no green bar moving up. and the light has stopped blinking.
I unplugged the usb and I still see the battery meter with no green bar moving. Installed the back cover and plugged the usb back in.
Now it is back to the red blinking again. . . ? ? ? ? ?
I think that it is a battery issue.
CAn anyone suggest why a battery would all of a sudden stop working?
Just ordered a new battery. $70.00!!! Ouch!!!
It does come with a battery charger for use with a Mini USB, but still, $70.00 is a lot of money!!
I will update with the results after i charge it up.
I got the new battery and put it into the charger. As I mentioned in an earlier post the new battery came with a separate charger for use with a mini usb. At first I had problems. The charger would not charge the new battery. I was using a wall connected mini usb to power the charger. So I went to the computer and tried the mini usb from there. It still would not charge. So I took the battery out of the charger and put it into then phone and went back to the wall charger and it was charging. I could feel the phone vibrate and then saw the battery meter slowly fill with green and back to empty and then fill green again.
So I decided to do a few other chores around the house and went to check the charging status after about 10 minutes. I noticed that the phone was on!! I did not turn the phone on. No one else was in the house to turn it on. It was just on. Weird.
So I took the battery out of the phone and decided to try the new charger again with the computer mini USB. It WAS charging this time!! I charged the new battery on this charger using the computer mini USB until the red light(charging) turned green (finished charging) and then put it in the phone. It works fine.
I then decided to put the defective battery into this charger and it was actually charging!! I left it overnight and it was green this morning: identifying it as a full charge.
When the new battery is down to 10% or less I will take it out and put the defective battery in and see what happens.
So I put the original battery back in after the green light came on identifying a full charge on the accessory charger.
It showed 1% and a message came up identifying that "the battery is low, please charge asap", something like that.
So, in my unprofessional opinion , the original battery is toast.
The new battery worked great after its initial charge using the included accessory charger.
When I decided to charge it using the phone itself with the wall charger I noticed some really weird things happening.
First of all you should know that I downloaded and installed Spoon Charge. Look it up here on the forums, free and works great. It basically tells you what charge level you have, temperature of the battery, what voltage is coming in to charge it and also type of charge the battery is doing: trickle, fast, very fast and on battery.You can set it to read reading at specific time intervals: I have it set to read at every second.
I noticed that the charge kept bouncing between very fast and trickle. At one point it went to on battery, then to trickle then to on battery then to fast.
Ok. Weird. . . I thought to myself.
So I let it continue to charge overnight.
The next day I "tried" to use the phone. it was as slow as it was at it's factory installed settings before I did the memory card fix, accelerator settings, and other fixes that I forgot now have forgotten that I have installed.
At this point I decided to drain the battery as fast as I could by turning on WiFi, Bluetooth, and play a movie at the loudest volume possible. As soon as it reached 10% I took the battery out and charged it with the accessory charger. The next morning I saw that the indicator light was green showing full charge and installed the battery in the phone. It booted up and I immediately received a message that the battery was low, saw 1%.
Knowing that this was a BRAND NEW BATTERY, I turned off the phone and took the battery out and waited a few seconds until I put it back in and rebooted the phone.
This time it said 86% charge!!!!!!
WTF!!!!
So I tried to use the phone and it was as sluggish as before. After about 25 minutes it was starting to be a bit faster but nothing like it was before.
I am really confused now. Since I have a new battery I have ruled out that as a problem. So now is it the phone itself? Could it be the wall charger that is faulty?
Any other suggestions would be greatly appreciated.
Another update.
I put the original battery in the phone and now it works!!!! The old battery that would not charge now charges and works!!!
The phone is not the same. Still really slow, can't get it out of the "LOCKED" position when I want to answer a phone call. Opera is sliggish then fast then sluggish. Not what I had the phone at before all of this started. It actually WAS stable. It WAS useable. Now I want to throw it into the drink!!!!!!
Not sure what to think anymore.
well bro go into the system help of ur mobile press as i say
2ce the end button one time call button, 2ce the end button one time call button,one time end button and u will find the problem it is in the charging port the same issue with me
Hello
My battery sucked, like going from 100 to 20 in 10secs so i asked for a new one from huawei greece. They sent me a new battery and when i put it into the phone and tried to boot it phone didn't boot. I thought it was because the battery was empty and when i connected it to charge first the light was blinking red and then phone boot up to the battery screen. 15min later i realised the phone was boot up and the red light was blinking red and not like staying red which is the light when you charge it with no battery. the percetange was 0%. i left it there for a little bit but nothing happend. then i tried to turn it off while it was connecting to the charger but that just boot up again with the same red blinking light and 0% percentage. I'm on aurora sp on top of aurora v20. When i try the old battery everything is working ok like it charges and everythinh. Could someone help me out?
Strange
Try this connect your phone to usb power without battery inserted. Then turn on when phone boot insert your new battery into your phone let charge until green led or 100%. And install Battery Stats and post details about your batt.
dark_vader said:
Strange
Try this connect your phone to usb power without battery inserted. Then turn on when phone boot insert your new battery into your phone let charge until green led or 100%. And install Battery Stats and post details about your batt.
Click to expand...
Click to collapse
i've tried that nothing changed. i let it boot up without the battery then put it back in without pulling off the charger and it still seemed to be without battery just with the usb cable. i got back to official gingerbread, no rooting and stuff now but still doesn't charge. the weird thing is that the very first time that iconnected it to the charger, when the phone was off, the light started blinking red without phone getting into "battery screen" and after a while it was at battery charging screen. 15min later it was booted up and "no charging" status
Cybergiannis said:
i've tried that nothing changed. i let it boot up without the battery then put it back in without pulling off the charger and it still seemed to be without battery just with the usb cable. i got back to official gingerbread, no rooting and stuff now but still doesn't charge. the weird thing is that the very first time that iconnected it to the charger, when the phone was off, the light started blinking red without phone getting into "battery screen" and after a while it was at battery charging screen. 15min later it was booted up and "no charging" status
Click to expand...
Click to collapse
Okay. Ask Huaei to change your battery since it's damage for another one you have and can active warranty do that
[Solved; Ignore] Phone on "charge" at 0% Instantly turns off when charger is removed.
As the title suggests, my phone will only turn on when the charger is plugged in and the battery stats say "0% Charging (AC) - 0s on battery".
Little background. I just flashed stock and AK 301 kernel as well as the latest libs. Phone turned on just fine, battery was at 50%.
I then decided to run Antutu for the hell of it to see if there were any performance changes etc.
Whilst Antutu was running the phone just powered off and wouldn't power back on. I had a red blinking light and that was it.
Eventually I managed to boot in to recovery after following advice to hold power + vol down for 15 seconds then plug the charger in.
The phone was on charge for about 3 hours with the LED still blinking at me.
When I managed to get in to recovery I flashed the only ROM I had on there after wiping all data etc. Which was Mahdi ROM.
Now when I turned the phone on, after many failed attempts, the battery icon is completely depleted with the charging icon inside the battery and as said in my first sentence it says 0% Charging and as soon as I take the charger out, the phone turns off instantly and won't turn back on nor will it blink until I put the charger back in.
Does anyone know whats going on? Could the battery have come loose somehow? I'd like to open it up but I don't have the required screwdriver to do so, anyone know any other way I can crack the case open without damage?
Any help or suggestions are most welcome. I can't return it on warranty as I bought this phone 1 year ago on the 4th June... Of course this had to happen 6 days after warranty expired!
I think I spoke too soon.
I just decided to hold the power button and vol down until the phone completely switched off. Turned it back on and now my battery says 32%.And as of writing this it's now up to 34%. So it's actually showing that it's charging now, whereas earlier the phone was on for about 20 minutes and said 0% the whole time.
Odd. That's all I have to say.
I can't delete my post for some reason. So I'll just flag it as answered. Sorry about that.