Related
I have looked high and low for a similar thread (detailing my specific problem) so I apologize if it exists and I was unable to locate it. I attempted to flash the PRIMEE ROM on my Acer with all apparently going well until the end. Messages were displayed saying that data, cache, etc. could not mount or something to that effect. I foolishly rebooted only to find that the Iconia will only display "Unrecoverable Bootloader Error (0x000000004)"
That's it. It is completely unresponsive to any other attempts to factory reset. Power/volume does nothing. I have looked extensively for some solution to this problem (attempted Reset button, moving lock screen slider/power-volume combination). You name it, I've tried it. It was briefly recognized by my PC when connected via USB but the AXP drivers were not found and did not install. I'm really flummoxed here.
Again, apologies if this is a duplicate thread but it seems fairly unique in that I cannot get any response at all. I fear that I've really done it this time. Any help would be greatly appreciated.
You DID install the custom clockworkmod app from the dev section, right? Not the one from the market...
Clockwork.....
No, unfortunately I did not. Didn't even realize there was a difference. I did install the Acer Recovery App as well, but otherwise, I think I'm pretty well screwed....
Well mate,now thats a huge problem you got there. If you would've screwed the /system partition np, /data partition,also np.....But uhh,bootloader error...i got the feeling your flashing has screwed up the internal Kernel of the Device,which is connected to the Bootloader,and without a Bootloader...well as its name says,you cant boot anything. Its like a Bios to a normal Computer,if you screw up the Bios,basically you can throw your Motherboard away...and sadly,the tablet comes all together,also i dont think Acer's Warranty will do anything about it aswell since you flashed an unofficial ROM/Kernel.
Your only solution is to send it to Acer,and see if your lucky enough and they fix it for free,if not ...well pay or get another one.
Goodluck with your problem mate.
Respect.
Yeah - kinda figured as much. Very disappointed that I lost it but I suppose I can make one last ditch effort to get it to Acer and see if they'll replace it but I'm skeptical at this point. Oh well - first time for everything. Lesson learned. Thanks for the help all the same.
First, congratulations. You managed to get the unrecoverable bootloader error
--> PM me with your UID, I may help you.
..............Edited..............
You should talk with sc2k I was in the same position you're in with the Unrecoverable Bootloader Error. Sent sc2k the UID for my A500 and he was able get my A500 back up and running again.
first of all, make sure you have a sd-card.
second. dl a stock rom to your PC 1.10.42 for instance, extract with decrypter and put the update.zip on the sd-card using a card reader or maybe your phone.
the put the sd-card back on your ICONIA.
after do the following:
hit VOLUME + (volume up) and power, until it vibrates, keep you finger on volume + and toggle the screen toggle switch.
it will then say formating data and formating cache, and the will start to flash the update.zip
once finished you should be ok.
Hi,
i have the same probplem, can anyone help me?
i have installed a custom firmware from thor and enabled the 3g option, my a500 will only vibrate after reboot with the error "Unrecoverable Bootloader Error (0x000000004)"
i cant read out the UID or anything else ... can anyone help me???
APX Mode runs but i cant recover with nvflash ...
So, I had been using my A500 for the last few days with no problems. Well, yesterday, I got home from work and powered it on. The lockscreen came up, but the screen was unresponsive. I turned it off and then back on, but screen still didn't work. Then I did a hard reset, which still didn't fix the problem. I put it into recovery, then did a wipe that still didn't fix the issue. I flashed the ROM again. Then a different ROM. All it does is is boot up and go to the lock screen, but the screen does not respond.
If I can avoid it, I don't really want to go through the hassle of returning it since I got it online. Hopefully it can be fixed without having to take it back. Thanks in advance for everyone's help.
Boot back into recovery.
Wipe your 3 things,
User Data
Cache
Dalvik
Then go to Mounts
Format the same 3 (user data, cache partition and Dalvak.
And Flexrom
Then flash your rom. Try and flash a basic rooted rom. No kernels, no gapps.zip
See what happens.
If you have a file called update.zip, on your sd, I would delete it. And anything else there except for the rom.
sounds like hardware failure. Has the tablet been dropped or banged around. The connector on the digitizer could have came loose.That would mean void warranty and take it apart ..
Send it back is likely your. Best option
Thanks for the quick responses! I'm gonna try these things, hopefully I don't have to take it back.
Guess it is a massive hardware failure. I formatted everything and reset everything I could. All ROM's will flash and boot, but I since the screen does not work, I cannot get past the first screen.
I'm going to have to return it, dammit. So, with no touchscreen, does anyone know how I can remove Clockworkmod Recovery and get the tablet back to stock? I don't want to get any problems during the return. Thanks everyone.
sikkboy626 said:
Guess it is a massive software failure. I formatted everything and reset everything I could. All ROM's will flash and boot, but I since the screen does not work, I cannot get past the first screen.
I'm going to have to return it, dammit. So, with no touchscreen, does anyone know how I can remove Clockworkmod Recovery and get the tablet back to stock? I don't want to get any problems during the return. Thanks everyone.
Click to expand...
Click to collapse
Well, with no touchscreen that makes the easy way out of the question.
Vache has a page with stock roms and updates;
http://forum.xda-developers.com/showthread.php?t=1113878
Now, some people, extracted the update.zip from the update rom, copied it to sd, and booted holding vol+ and PWR. This automatically starts the update flashing.
Others have actually flashed them through CWM and were successful. You can read through the thread and see how they fared.
On a normal basis, we would install AcerRecovery and flash them through there, as that is the preferred method for the full rooms. But this is out of the question for you, as you only have CWM.
With the update.zip, it might work, might not. The update might look for a preinstalled stock rom matching the ComGen numbers. Really don't know.
(I would try the above if the following doesn't work)
Another method, is to use ADB and push a stock image to your device. I've never done this personally, but I know it can be done. Best bet, is to repost the question "how to push a stock image with adb", then explain briefly why. And post it in the Q&A forum. This should hopefully get some folks who use adb to help you out. I rarely use it.
Moscow Desire said:
Well, with no touchscreen that makes the easy way out of the question.
Vache has a page with stock roms and updates;
http://forum.xda-developers.com/showthread.php?t=1113878
Now, some people, extracted the update.zip from the update rom, copied it to sd, and booted holding vol+ and PWR. This automatically starts the update flashing.
Others have actually flashed them through CWM and were successful. You can read through the thread and see how they fared.
On a normal basis, we would install AcerRecovery and flash them through there, as that is the preferred method for the full rooms. But this is out of the question for you, as you only have CWM.
With the update.zip, it might work, might not. The update might look for a preinstalled stock rom matching the ComGen numbers. Really don't know.
(I would try the above if the following doesn't work)
Another method, is to use ADB and push a stock image to your device. I've never done this personally, but I know it can be done. Best bet, is to repost the question "how to push a stock image with adb", then explain briefly why. And post it in the Q&A forum. This should hopefully get some folks who use adb to help you out. I rarely use it.
Click to expand...
Click to collapse
Thanks for all your help. I was able to get it back to stock. The return should go fine. You're awesome and I did not forget to use the thank you button.
have you tried a USB keyboard or mouse to flash it.thou I still think its hardware.
Failure
You can use normal usb mouse with this tablet, you will get mouse pointer on the screen when you connect mouse...
erica_renee said:
have you tried a USB keyboard or mouse to flash it.thou I still think its hardware.
Failure
Click to expand...
Click to collapse
I was able to flash using the physical buttons. I got it all back to factory specs so I can return it. you were correct I believe, it does seem to be a screen hardware failure. Everything else works but the touch response.
Im very sorry for your luck.. But i do believe this is a very well built device. Someone has to get a bad one sometimes.. Boohooooooooo
erica_renee said:
Im very sorry for your luck.. But i do believe this is a very well built device. Someone has to get a bad one sometimes.. Boohooooooooo
Click to expand...
Click to collapse
Guess I had to take one for the team
Hi y'all, i recently within the last month 2 months taken up a very unsual craving for delving deeper into my technology, with that being said. my tab 4 7.0 sm-t230 i Downloaded an app called "lucky patcher" was messing with it, been reading about deoxe(ing) my tablet,it gave me the option to do it for me (usually i enjoy the challange of using a emulated terminal and what not) but every file etc would take too long, and it worked, my daughter ot well over 150 million score on subway surfers etc. i notice my phone sluggish even bein over clocked, I/Os that i did myself, running max cpu and performance i could blabber forever since my 3 kids arnt interested in my newly found hobbie and my husbands a truck driver, i'm getting it out here (i'm sorry but i do need help) so anywyas i decided to kick her into recovery and begin to just manually delete all the dex copied files through TWRP went good till i wetn to reboot after staring at my screen for 3 hours and got threw up on twice from sick babies and i was boot looped. i decide to restore a previous freshly flashed rom/root backup. well they were deleted too. and all i could do was a master re format i think is what i read it was called, and excited to get back and re download everything i notice i now have no OS and no recoveries and TWRP fulll of emptiness. i can play through TWRP i've changed file permissions i've tried everything ive read and tried everything i learned and experianced to fix this issue, and yet stillno idea how to fix this issue..
Now the fun part is my set up. the only pc i have means and access too is my samsung Chromebook, and my tablet, that's it, no phone because my tablet handles everything my little heart can desire.
needless to say, i need some kinda recovery tool kit i can use via my chromebook, that'll allow me to use ADB for chrome (which another question i have is how do i enable my tablets USB debugging if i can't get into the phone?) so toolkit for chromebook for a ADB side load if possible. or some way to do it through my emulated terminal in TWRP,. my minds rushing, i'm confused and my over emotionally stressed female head is killing me without my tablet. (drive to any town where i could use anything but my chrome book. 3.5 hours.
sorry i pray this post doesnt get deleted. I need help because my tablet is my main source of income being in real estate when i'm back in town once a month. never made a page or a forum or anything like this usally google magic does it. but 3 days and countless mind numbing forums i've given in.. please help me! i'll donate pay something idc at this point. -a pissed off irish southen woman on the verge of pms and a meltdown thanks in advance i'll try to reply as fast as humanly possible, ill be up for awhile tonight going through more posts.
0well with a little more tinking around, i think i have found the issue as too why no matter what i do i'm unable to boot a rom/os. mt EXT3 wil not mount my system i'm clueless as to how to fix that at all threw TWRP, anyone have an idea of any kind please? i'm for anything, even if after more attempts and countless hours, i'll record me skipping it across my lake, and we'll all take guesses as too how many skips it'll do. hopefully my dog will fetch it if i throw at the wrong angle. (completely dumb jokes are the only thing keeping me from returning Sain.) we all cant be too serious. please very interested on how to fix this issue tho.
s,
you need to get a custom rom zip onto an sdcard, check development section.
in twrp, flash the rom,
if the rom still doesn't boot, then reboot to twrp again and use the format data option, then reflash rom and try again.
twrp terminal sucks, you can try flashing aromafm https://www.androidfilehost.com/?fid=95916177934547314
this is for the marvell variant, it may work for the msm/qcom variant.
stop using lucky patcher.
m
moonbutt74 said:
s,
you need to get a custom rom zip onto an sdcard, check development section.
in twrp, flash the rom,
if the rom still doesn't boot, then reboot to twrp again and use the format data option, then reflash rom and try again.
twrp terminal sucks, you can try flashing aromafm https://www.androidfilehost.com/?fid=95916177934547314
this is for the marvell variant, it may work for the msm/qcom variant.
stop using lucky patcher.
m
Click to expand...
Click to collapse
Hi, that's where another problem lies within, I have no way of communicating with the phone or being able to do much, considering the only pc/laptop i have access too is my chromebook, and this thing is a ssteaming pile of regurgitated dog bile. if theres one regret in life.. buying this thing.. even dual booted i still can't process the zips or compile them properly, maybe i need to find out how to build a zip file from scratch and comepile the corresponding stuff myself in small hopes it'll work on this chromebook
and yes, never again will I use that. it worked don't get me wrong. but then it decided to deodex my system to oblivion.
s,
hey that rhymed !
your alternative is to use a usb thumbdrive and an otg cable , else nada.
m
moonbutt74 said:
s,
hey that rhymed !
your alternative is to use a usb thumbdrive and an otg cable , else nada.
m
Click to expand...
Click to collapse
I'm gla you have a sense of humor, thank you hun. looks like i'm tabletless until i go back into town in two weeks ): i suppose till then i will tinker with it some more and unlock the universe, or find a way to convert zips that are made for windows or mac and be able to convert it to be able to be used and transfered unto the phone. Chromium os or chrome now has ADB for chrome as an extension but very iffy, has 3 options to screen record/screenshot and terminal. i was able to use vitural box for about 2 hours and force odin to pretend i was on a widnows enough to orignally root, then it crashed my chromebook. Maybe i've gotta achieve 88 mph first to get this thing to work? lol my chromebook "overclocked" 810 mghz.... maxx.... frequency says it can go to 2100... i think if i even try that i'd recreate the "hydrogen bomb"
Hi everyone, I've searched and tried some solutions for this but the problem is the display is permanently black, not even samsung logo is displayed on bootup.
My GT-i9505 has a CWM recovery installed and a custom ROM, and today it notified me that SU Binary needs to be updated, so I updated it and it said Success, recommend to reboot, which I did.
It seemed to boot up but the display was constantly black. Manually turned it off by holding down power button, then restarted but still nothing.
I have Odin and samsung drivers etc, just not sure if I should try and flash a stock/new Custom ROM from Odin or if theres an easier way to do it (maybe someone can guide me thru the CWM recovery and be my eyes since my screen is Black?)
Please and thank you.
First of all, you better switch to TWRP.
Second, maybe try flashing a SuperSU zip through the recovery.
If that doesn't work, then try dirty flashing your current rom again.
GDReaper said:
First of all, you better switch to TWRP.
Second, maybe try flashing a SuperSU zip through the recovery.
If that doesn't work, then try dirty flashing your current rom again.
Click to expand...
Click to collapse
Thanks for the goble-de-goop, I have no idea what you are saying (this is n00b friendly forum topic!) and how can I even try that when there's nothing but blackness on my screen?
It is booting and running, touch is working etc but I'm completely blind. Can someone please try to help with n00b friendly suggestions, will flashing a new Custom ROM work? And I'd like to know what has happened after the SU binary update that caused screen/backlight to become non-functional...
Just to point out, I'm not being rude I am being up-front, the first reply I get from here is exactly what I expected, not n00b friendly but more of a suggestion from a nerd who wants to show the other readers that he really 'knows his stuff', however un-useful it is.
I know a little but not enough to solve this on my own, I'm hoping someone out there see's this and unselfishly suggests something without turning it into debate about n00bs not asking the right questions in the right place at the right time!
My phone doesn't work, I need it to work, stupid SU binary update has screwed it, please help!
Pandemic_ said:
Thanks for the goble-de-goop, I have no idea what you are saying (this is n00b friendly forum topic!) and how can I even try that when there's nothing but blackness on my screen?
It is booting and running, touch is working etc but I'm completely blind. Can someone please try to help with n00b friendly suggestions, will flashing a new Custom ROM work? And I'd like to know what has happened after the SU binary update that caused screen/backlight to become non-functional...
Just to point out, I'm not being rude I am being up-front, the first reply I get from here is exactly what I expected, not n00b friendly but more of a suggestion from a nerd who wants to show the other readers that he really 'knows his stuff', however un-useful it is.
I know a little but not enough to solve this on my own, I'm hoping someone out there see's this and unselfishly suggests something without turning it into debate about n00bs not asking the right questions in the right place at the right time!
My phone doesn't work, I need it to work, stupid SU binary update has screwed it, please help!
Click to expand...
Click to collapse
...err...wow...
do you have a HDMI adaptor cable aka MHL adaptor or a chromecast type device at home ? it maybe that your screen has just died and that it's nothing to do with the binary (if it's booting normally albeit with a blank screen).
_neutron_ said:
...err...wow...
Click to expand...
Click to collapse
Starting to think XDA is not the right place to ask for help...
3mel said:
do you have a HDMI adaptor cable aka MHL adaptor or a chromecast type device at home ? it maybe that your screen has just died and that it's nothing to do with the binary (if it's booting normally albeit with a blank screen).
Click to expand...
Click to collapse
Good idea, I do have chromecast but will need mini HDMI cable/adaptor to check. Although it would be massive odds against random screen death, since it was immediately after reboot from SU binary.
Thanks for the intelligent reply, glad to see there are still some helpful people here.
if you can borrow a lead and your screen is being mirrored you can download an image file of TWRP and flash it with flashify from the store. I doubt screen mirroring works from the recovery
http://play.google.com/store/apps/details?id=com.cgollner.flashify
unzip the attached file and copy it to your SDcard then find it within the flashify app...
Awesome OK that gives me a starting point TY. When I connect the MHL adapter will it mirror automatically or will I have to try to blindly press the mirror symbol? I haven't used an MHL adapter/cable before. If it works then I'll use Flashify and hope it restores the phone screen.
if it's going to work it will work without any selecting of options, it's automatic...
If the you run out of solutions, you could flash a stock ROM back to your phone as this will bring the phone back to the factory settings; however, you will lose your data and installed apps.
If you decide to flash back to stock using Odin, I suggest launching Odin, uncheck everything except f.reset time, connect the phone in download mode, flash the rom, when you see the word "reset" in the status window, remove the USB cable from the phone, remove the battery, wait 5 seconds and replace the battery, boot into recovery, perform a factory reset, and reboot. Be sure to use the stock firmware from sammobile.com for your phone.
Pandemic_ said:
Thanks for the goble-de-goop, I have no idea what you are saying (this is n00b friendly forum topic!) and how can I even try that when there's nothing but blackness on my screen?
It is booting and running, touch is working etc but I'm completely blind. Can someone please try to help with n00b friendly suggestions, will flashing a new Custom ROM work? And I'd like to know what has happened after the SU binary update that caused screen/backlight to become non-functional...
Just to point out, I'm not being rude I am being up-front, the first reply I get from here is exactly what I expected, not n00b friendly but more of a suggestion from a nerd who wants to show the other readers that he really 'knows his stuff', however un-useful it is.
I know a little but not enough to solve this on my own, I'm hoping someone out there see's this and unselfishly suggests something without turning it into debate about n00bs not asking the right questions in the right place at the right time!
My phone doesn't work, I need it to work, stupid SU binary update has screwed it, please help!
Click to expand...
Click to collapse
Since you said you have CWM recovery and a rom installed I assumed you would knew how to flash stuff. Unless they were flashed by somebody else?
Anyway, flashing SuperSU.zip is as easy as googling for the zip then boot into recovery and flash the zip file.
Unless the recovery is dark too. Then that's a problem.
And flashing the rom again is done the same way. No need for TVs and chromecasts.
Theoretically, flashing the SuperSU.zip should work, as it replaces the binaries.
Flashing the rom should work too. Unless you have a dead screen. Then no software can fix it.
When you're using apps that modify system files things like this can happen. Something may have went wrong during the update.
@GDReaper he's already said "how can I even try that when there's nothing but blackness on my screen?" to your suggestion of flashing via recovery so MHL will help him
1) to see if the phone is running normal minus the screen
2) to replace CWM as you suggested without using recovery (which he won't be able to do even with MHL).
3mel said:
@GDReaper he's already said "how can I even try that when there's nothing but blackness on my screen?" to your suggestion of flashing via recovery so MHL will help him
Click to expand...
Click to collapse
So I probably misunderstood him. He said it is booting and so I thought that, during the booting, the screen works, and only when you are about to go into the OS the screen is black (As it happened to me before). My bad.
If the screen is black during the whole process it means the screen is busted. And it was probably just a coincidence, as I don't really see how updating the su binaries can damage the screen.
GDReaper said:
So I probably misunderstood him. He said it is booting and so I thought that, during the booting, the screen works, and only when you are about to go into the OS the screen is black (As it happened to me before). My bad.
If the screen is black during the whole process it means the screen is busted. And it was probably just a coincidence, as I don't really see how updating the su binaries can damage the screen.
Click to expand...
Click to collapse
Ok thanks man, it's dark in recovery too unfortunately. Will update again after trying the MHL cable. :good:
Pandemic_ said:
Ok thanks man, it's dark in recovery too unfortunately. Will update again after trying the MHL cable. :good:
Click to expand...
Click to collapse
Ok. Then it is definitely a screen problem. Changing software won't fix it.
You have to get a new screen.
I've tried the cable, no output to HDMI though. Phone is operating but in complete black screen from power on. Have tried to tap the screen mirroring button blindly (by touching all the top system buttons one by one) but no change. This leads me to think it is a software/firmware issue, somehow the SU binary has affected graphics output???
So my only chance now is try to flash using Odin? I have downloaded a new Custom ROM, ResurrectionRemix-M-v5.6.4-20160223-jfltexx but I think I can only flash that one using recovery which will be difficult blind, unless someone can give me precise button sequence. Unfortunately I can't remember exactly what recovery I have on there, but I think it may be the touch version...
I flashed TWRP using Odin no probs, but still no use as screen is still blank from power on.
I was going to revert to stock first but sammobile.com downloads at only 15kb/s so I'm not waiting 2 days for that 1.5gb download.
Can someone please give me a link to a good download for my GT-i9505, that I can flash with Odin. I want a light Custom ROM but if not possible to flash from PC then I'll try stock first.
Thanks,
Hi guys, I have a similar problem. I had a notification saying I need to "Update the #SU Binary". There was issues with the update, it gave me the option of restarting or trying the update again. I selected to try the update again. It failed again and now the screen is black with constant error messages, saying "Unfortunately, Galaxy Apps has stopped", "Unfortunately, S Health has stopped". Pretty much the same error message recurring with every app that would normally run on start up, then the phone just reboots itself every 5 minutes after the error messages have all done a round. I am desperate to recover the data on the phone.
Pandemic_ said:
I flashed TWRP using Odin no probs, but still no use as screen is still blank from power on.
I was going to revert to stock first but sammobile.com downloads at only 15kb/s so I'm not waiting 2 days for that 1.5gb download.
Can someone please give me a link to a good download for my GT-i9505, that I can flash with Odin. I want a light Custom ROM but if not possible to flash from PC then I'll try stock first.
Thanks,
Click to expand...
Click to collapse
SamFirm should speed things up.
---------- Post added at 07:37 AM ---------- Previous post was at 07:34 AM ----------
leNoobe said:
Hi guys, I have a similar problem. I had a notification saying I need to "Update the #SU Binary". There was issues with the update, it gave me the option of restarting or trying the update again. I selected to try the update again. It failed again and now the screen is black with constant error messages, saying "Unfortunately, Galaxy Apps has stopped", "Unfortunately, S Health has stopped". Pretty much the same error message recurring with every app that would normally run on start up, then the phone just reboots itself every 5 minutes after the error messages have all done a round. I am desperate to recover the data on the phone.
Click to expand...
Click to collapse
There isn't much you can do. Backup user data and factory reset.
I have tried recovery mode and factory reset.
I'd like to refashioned the os and give that a try. But I don't want a custom Rom unless that Rom can be updated without flashing.
I really don't want to have to buy another phone right now.
I have googled the issue but the links are from 2017. I want some up to date links with current info.
Also a nice step by step tutorial would be nice. As I'm not experienced flashing and whatnot. Oh and no sarcastic comments like "step 1: find the stock Rom, step 2 plug into pc and flash" because that really doesn't help.
Nothing but a rude/unthankful/demanding post, so...
#1 use the search feature...it's your friend.
videotape74 said:
Nothing but a rude/unthankful/demanding post, so...
#1 use the search feature...it's your friend.
Click to expand...
Click to collapse
Only using attitude because people always send a bunch of useless inks from years ago with links to mega or google drive that no longer exists.
I just wasn't in the mood for the same crap I was told when I tried to flash stuff onto an LG G4. Stuff like being given instructions assuming I'm experienced and dead links. I'm tired of clicking on mega and drive links only to find what I'd been searching for has been deleted.
Even new phones have mega files people would remove.
I'm not blaming anyone. I was just sternly for the right stuff and no vague responses.
Yes I can use the search.
I should just garbage this phone. All I've read about it was issues and issues. Every SD810 and SD808 has been nothing but a mess.
I'll easily blame qualcomm for that one.
If you aren't experienced and not willing to take the time to learn...don't bother trying to flash. And regardless of the fact that all people don't provide "relevant" info/help, you should still be thankful. No one here has to do/help with all this stuff, it is a community and should be appreciated.
videotape74 said:
If you aren't experienced and not willing to take the time to learn...don't bother trying to flash. And regardless of the fact that all people don't provide "relevant" info/help, you should still be thankful. No one here has to do/help with all this stuff, it is a community and should be appreciated.
Click to expand...
Click to collapse
I can't install the android USB drivers because the PC doesn't connect to ANY port on my PC so I can't update the drivers (restarted, full shutdown, two different cords)
I can't get into the phone to access developer mode so I can unlock the bootloader
Let's start there. I found a video on youtube, but the link the guy provided was dead, it was a 3 year old link afterall.
I think, I am doing it right?
I am installing the Android Developer thing so I can get the drivers installed for the device.
then I can try and unlock the bootloader "somehow" I have yet to look into this.
I just HATE HATE HATE, when I am trying to do one thing and 6 other things get in my way and then things stem and branch off from those things that it results in me being so far from the original task that it's just aimless.
on BB10, to flash new OS, you downloaded a EXE file for windows, pressed it twice, said yes I am an admin and BAM, os was flashed.
Why can't android be that simple.
EDIT: if I let the phone sit, it goes to an "encryption unsuccessful" screen then hangs there for ages then just restarts. Sometimes I can get a factory reset option, but that doesn't do anything.
I went into recovery mode to wipe it, NOTHING
wiped the cache, nothing.
I am very very very frustrated.That's all. I just didn't want to be frusterted and then someone nicely comes along and says "watch this video, it has everything you need" then that video has dead links or something. I still am frusterated.
Why is the OS failing to encrypt, why is it corrupt?
Okay, new issue.
I can't get into the OS to bootloader unlock the phone. So I get an oem unlock error through adb. I guess this is the end of the road right?
Look for nexus 6p 4 core fix and you'll find the info you need.