Hi all, unluckely I had the dead zone problem with my G2 and I replace the digitizer with a new one but after a couple of weeks the same thing happen to the new one. I tried to play a bit with the connection but know I have no more touch on the screen. possible problem with the logic board any one got a solution for this or the G2 is lost forever. My main problem is, is it the logic board or the flex cable, by the way the flex cable was bought new also.
not to forget that everything else work.
thanks for any replied
Mike
Are you on custom rom bro? i have the same problem and only experienced it when i changed to custom rom (icex) from stock rom.
no I am on stock
Related
Today, when I was switched on my Nike and tried to write my SIM cards password, I realised that touchscreen is not working. I tried to press various places of the screen but with no luck I made some reboots but again the same luck... so propably is not software problem. It's very difficult to use it only with it's keyboard and it looses its usability :S Is there anything I can do to fix it up???
Recently I came onto the same problem, at first the screen didn't work and then the screen just became black.
I opened up the phone and saw the flex cable had been scratched, so I bought a new one at ebay, replaced the old one, and wolah... worked like charm. Got my old phone back, installed a new 6.5.3 ROM and I'm LUVIN my "old" HTC.
Search for HTC TOUCH DUAL NEON 300 FLEX CABLE REPAIR LCD SCREEN US
I bought mine in Iceland, (Europe) but I think that all the flex cables are the same in all versions of the phone.
Thank you for your advice
Thank you for your advice,
I didn't manage to change the flex cable yet, because the touchscreen started to response again, but just for 3 hours... Now it does not response again. The screen now displays everything fine, but if I touch nothing happens. I can only use it by the keyboard. I heard that in most chases, scratched flex cable turns screen white or black, it doesn't affects the touch(screen). But I'll give it a go
For a bit time ago i accidently broke my lcd display on my hd2, and because htc could not fix this cheap i decided to try myselvf.
first i ordered a lcd and a new digitizer and soldered them together and fixed everything just like in the video and the lcd started to work, but now my touch pad does'n work! I can't do anything
Then i took the screen out and ordered a new one from ebay which was assembled from the shop.
And same resault
what could be the problem? I have a danish hd2 and i have tried to update the firmware after i replaced the screen and digitizer and still no respond
what could be the problem?
hey, did u fix the digitizer yet. i had a similar problem. the volume buttons got stuck in and i decided to open it and fix it. right after closing it back the digitizer stopped functioning...............please let me know asap if u managed to fix urs and how u did it thanks
Same problem here
I've got the exact same problem. Replaced LCD and digitizer but it is still not working. Additionally the screen is a little yellowish. Anyone knows if this might be related and any idea who to possibly fix this?
Hi, I have exactly the same problems, even tried with 2 fresh new digitizers. Could it be that they are extremely sensitive on the inside? Or is it some glitch somewhere?
Extremely frustrating!
Sent from my HTC HD2 using XDA App
well mine is in the scrapped now. when my digitizer arrives and i sort things out i will get back to you
Hi, I bought HD2 with broken digitizer, so after it came to me I immediately buy new digitizer, didn't look for the cheapert but once again I resolve myself to never buy things for china digitizer doesn't work so I need to new one from USA, send it to my friend and he repair it within day, now everything work... and yes digitizer are very sensitive
Hey guys, I hope you can help me with this:
I cracket the screen on my Lg G2 (D802), so i bought a new screen to fix it. Screen is working fine, but now it got (almost) no service I opened it several times already to check all connectors, antenna cables and so on but can't figure out the problem... Has anyone had similar issues and knows how to fix this?
Thank you very much!
hi. i Have that same prob. after lcd replace... no service - try wipe and fresh instal rom - form me it's working .
Hi i changed my board for one of another g2. This g2 leave to response the touch panel 1 week after to install the rom cloudy g2 2.2. This toch panel has little unstuck because some months ago it got wet in the corner, but never have problems. Since i installed the cludy rom started to gradual leave to response.
Now after to panel not work i decided to put the board in other lg g2 with working screen but bad board.
I have a dude. If i to flash again this board with the other screen, can to leave to response again?. Is problem generated for board or scrren?. Seems thar the original screen of board was be JID type, and now is LGDI..
Anyone have the same problem??
Thanks
So I bought a HD2 with bad touch screen. The issue was the very common one that every one knows, red button that was poking into the touch screen flex cable. I opened up the phone and fixed the issue and touch screen was working perfectly fine. In the process, unfortunately, I chipped a little edge of the front glass/digitizer. It was not a big deal as phone was still working fine. But I decided to buy a new front glass.
When my new front glass arrived, I separated the digitizer/front glass from LCD, but then half of my LCD got corrupted. So I ended up buying an LCD too!!!
Now comes the issue: when I put the phone together, touch screen doesn't work at all. I have tried all combinations of NEW / OLD digitizer and NEW / OLD lcd. Nothing works. I wonder if anyone can help me figure out why?
P.S. When testing, I happened to connect the phone to my 5w wall charger directly connecting it to power pins (without battery installed). Would that be why I lost touch? Is the touch issue now because of motherboard that was directly connected to adapter, not getting power from its designated battery?
have you tried the old lcd with old digitizer (which was working)?
tried it before replacing?
did you made some change to the software before replacing?
I currently have this problem too while trying to revive my old- almost 3 years inactive- HD2 with new touchscreen, and still trying to figure out where is the problem
b3rvirus said:
have you tried the old lcd with old digitizer (which was working)?
tried it before replacing?
did you made some change to the software before replacing?
I currently have this problem too while trying to revive my old- almost 3 years inactive- HD2 with new touchscreen, and still trying to figure out where is the problem
Click to expand...
Click to collapse
Yes I had tried the old LCD, and that didn't work either.
I installed a WiFi Keyboard on it.
Did you resolve this issue?