Went ahead and updated my Rogers N910W8 to 6.0.1 coming from 5.0.1. Flashed the firmware from here using odin
http://www.sammobile.com/firmwares/download/72141/N910W8VLU1DPE2_N910W8OYA1DPE2_ESK/
After the flash I went into recovery to factory reset. Booted up started setting up the phone. Then I flashed cf-auto root found here using odin again.
https://download.chainfire.eu/563/CF-Root/CF-Auto-Root/CF-Auto-Root-trltecan-trltecan-smn910w8.zip
Rebooted and started using titanium backup to remove/freeze bloatware.
Went ahead and flashed twrp-3.0.2-0-trltecan.img.tar (https://dl.twrp.me/trltecan/) again using odin.
Rebooted and started using the phone went to charge the phone and started using it again. Installed more apps such as adaway which required a reboot. This is when my phone would not get past the Samsung Galaxy Note 4 powered by android screen. In the top left it says set warranty bit: kernel in yellow font. I can access recovery fine and download mode as well. I tried factory reset but it still won't get past the logo screen. Is my only option at this point kies?
Related
Hi, I am on official 6.0.1 from Samsung, I rooted my S5 using cf auto root, after that I tried to install twrp 3.0.2.0, I downloaded it from the twrp website, booted into download mode and installed it using Odin 3.10.7, it showed pass but when I tried to boot into recovery the screen went black & stayed that way. I had to remove the battery to reboot the phone but it then goes straight to download mode, no matter what I try it keeps booting into download mode. The only thing I can do is flash stock firmware.
Am I missing something or doing something wrong, I so want to get my S5 rooted & a rom installed. Thank you in advance
I've been trying to *fix* my phone for the past 10 hours and not having much luck. I have tried to flash stock 6.0 ROMs using the TWRP and it fails (not sure why).
I flashed a 6.0 ROM, which didn't include the bootloader and modem and the phone was stuck at the SAMSUNG logo.
I then flashed a stock 6.0 ROM using ODIN from this link: http://www.sammobile.com/firmwares/download/87542/G900IDVU1CPG2_G900IXSA1CPG2_XSA/
After waiting about 15 minutes, the phone went beyond the SAMSUNG logo and displayed that the apps were initialising. It then went back to the SAMSUNG logo.
I used odin to flash the bootloader and modem found from another thread: http://forum.xda-developers.com/galaxy-s5/general/s5-g900i-marshmallow-bootloader-modem-t3382754
I've since flashed TWRP again, done a wipe / factory reset and then flashed the ROM again from sammobile (which includes the recovery) so I then immediately flashed the TWRP again.
What am I doing wrong here? Why wont the phone go past the SAMSUNG logo?
Before leaving the office I done the flashing again and halfway home in the car the phone booted fine as normal.
No ideas what happened before. I effing hate this phone.
Today my father's Galaxy S5 SM-G900F freeze after connecting to PC when I tried to copy some photos to PC. After that it started bootloop. Phone was ALL STOCK, no root, no twrp, no nothing without original latest android 6.01 directly from Samsung.
First thing I tried was wipe cache and factory reset. Nothing changed. Then I tried to download new firmware via Kies3, it took some time, update succesfull but still bootloop. Next I tried to put latest firmware G900FXXS1CPI6_G900FXEO1CPE2_XEO via Odin. Everything fine, succesfull but still no success, bootloop. Then I flash latest twrp on it. Twrp boot fine, I tried wipe, nothing changed. What can I do? Phone is bricked permamently or there is something I can do? TIA for any clue! I've read tons of forums and sites and everywhere told to flash firmware but it not worked for me
update: I also discovered strange thing when I tried to flash via twrp. After few second flashing (blue bar does not go forward) phone reboot itself and stuck on Samsung logo.
tss555 said:
Today my father's Galaxy S5 SM-G900F freeze after connecting to PC when I tried to copy some photos to PC. After that it started bootloop. Phone was ALL STOCK, no root, no twrp, no nothing without original latest android 6.01 directly from Samsung.
First thing I tried was wipe cache and factory reset. Nothing changed. Then I tried to download new firmware via Kies3, it took some time, update succesfull but still bootloop. Next I tried to put latest firmware G900FXXS1CPI6_G900FXEO1CPE2_XEO via Odin. Everything fine, succesfull but still no success, bootloop. Then I flash latest twrp on it. Twrp boot fine, I tried wipe, nothing changed. What can I do? Phone is bricked permamently or there is something I can do? TIA for any clue! I've read tons of forums and sites and everywhere told to flash firmware but it not worked for me
update: I also discovered strange thing when I tried to flash via twrp. After few second flashing (blue bar does not go forward) phone reboot itself and stuck on Samsung logo.
Click to expand...
Click to collapse
I think you must try a repair rom its come multi package boot loader and modem and ap and thetr is the pit file and be sure to get the proper one for your device and try to flash via odin
Thanks but it didn't work for me. I just tried 4 files (BL/AP/CP/CSC) and 5 files (+PIT). Everything success in Odin, recovery back to stock samsung but phone can't boot. Few times restart then stuck on samsung logo. Is any other way to try?
Hello everyone. One of the ladies I look up to as a mother gave me her broken s4 this morning. It was in a boot loop, and needed to have the full software flashed again. I downloaded OK3 from sammobile and successfully flashed it using Odin 3.11. I then rebooted and flashed CF Autoroot in Odin, rebooted and tried to enter recovery mode. I would get 3 lines of info that left the screen really fast, then the screen was blank for 10 seconds, then it vibrates and reboots into the normal rom. So I went back to Odin and flashed TWRP 3.0.2-0-jftespr.img.tar (unchecking the options for auto reboot, re-partition, f. reset time) and the log says suceed 1/failed 0, I get a green pass and when I try to reboot into recovery I get the seandroid message. So the phone knows I have a non-standard recovery...still after that message I get the same blank screen, 10 second delay, and then vibrate and reboot to the rom. I tried reflashing the stock OK3 and the seandroid message goes away, but recovery mode still does not work for me Other than this recovery issue, the phone appears to work fine and it even downloaded an OTA (which I have not installed.) Any suggestions?
I would try flashing TWRP with a different version of Odin. I recently needed to reflash recently. I had a similar problem. Tried Odion 10.7. Worked fine. You could also install the Flashify app and install your recovery with that.
spaldingsmails said:
I would try flashing TWRP with a different version of Odin. I recently needed to reflash recently. I had a similar problem. Tried Odion 10.7. Worked fine. You could also install the Flashify app and install your recovery with that.
Click to expand...
Click to collapse
Thanks for your suggestions, I will try and let you know the outcome. Of course now, I have the problem with the wifi not turning on...which is only harder to fix without a recovery to boot into. Any thoughts on this new wrinkle?
spaldingsmails said:
I would try flashing TWRP with a different version of Odin. I recently needed to reflash recently. I had a similar problem. Tried Odion 10.7. Worked fine. You could also install the Flashify app and install your recovery with that.
Click to expand...
Click to collapse
Thanks for your suggestion! I tried flashing using odin 3.09 and the white samsung usb cable, and I finally have a recovery! Do you happen to know how to fix the wifi?
No idea on the wifi. That is way over my head.
angel4b said:
Hello everyone. One of the ladies I look up to as a mother gave me her broken s4 this morning. It was in a boot loop, and needed to have the full software flashed again. I downloaded OK3 from sammobile and successfully flashed it using Odin 3.11. I then rebooted and flashed CF Autoroot in Odin, rebooted and tried to enter recovery mode. I would get 3 lines of info that left the screen really fast, then the screen was blank for 10 seconds, then it vibrates and reboots into the normal rom. So I went back to Odin and flashed TWRP 3.0.2-0-jftespr.img.tar (unchecking the options for auto reboot, re-partition, f. reset time) and the log says suceed 1/failed 0, I get a green pass and when I try to reboot into recovery I get the seandroid message. So the phone knows I have a non-standard recovery...still after that message I get the same blank screen, 10 second delay, and then vibrate and reboot to the rom. I tried reflashing the stock OK3 and the seandroid message goes away, but recovery mode still does not work for me Other than this recovery issue, the phone appears to work fine and it even downloaded an OTA (which I have not installed.) Any suggestions?
Click to expand...
Click to collapse
I would suggest you flash TWRP in a different version.
I figured it out. I'm currently back to running VZW_BPB1_ODEX_DEODEX_V9.
Not sure what I did. I successfully unlocked the bootloader. At that point it was running VZW_BPB1_ODEX_DEODEX_V9. Then I went and flashed VZW_QA1_STOCK_ROOTED_DEODEXED.zip. It flashed fine. During boot up it just hung at the red verizon screen. So after 2 attmepts I tried going back to VZW_BPB1_ODEX_DEODEX_V9. I flashed it, and then in odin I flashed G900V_Firmware_PB1.tar. It now wont go past the first samsung screen and It seems to have lost safestrap. When going into recovery it gives me the stock recovery. What file can I flash in Odin to get me back up and running? Thanks