Hello everyone. One of the ladies I look up to as a mother gave me her broken s4 this morning. It was in a boot loop, and needed to have the full software flashed again. I downloaded OK3 from sammobile and successfully flashed it using Odin 3.11. I then rebooted and flashed CF Autoroot in Odin, rebooted and tried to enter recovery mode. I would get 3 lines of info that left the screen really fast, then the screen was blank for 10 seconds, then it vibrates and reboots into the normal rom. So I went back to Odin and flashed TWRP 3.0.2-0-jftespr.img.tar (unchecking the options for auto reboot, re-partition, f. reset time) and the log says suceed 1/failed 0, I get a green pass and when I try to reboot into recovery I get the seandroid message. So the phone knows I have a non-standard recovery...still after that message I get the same blank screen, 10 second delay, and then vibrate and reboot to the rom. I tried reflashing the stock OK3 and the seandroid message goes away, but recovery mode still does not work for me Other than this recovery issue, the phone appears to work fine and it even downloaded an OTA (which I have not installed.) Any suggestions?
I would try flashing TWRP with a different version of Odin. I recently needed to reflash recently. I had a similar problem. Tried Odion 10.7. Worked fine. You could also install the Flashify app and install your recovery with that.
spaldingsmails said:
I would try flashing TWRP with a different version of Odin. I recently needed to reflash recently. I had a similar problem. Tried Odion 10.7. Worked fine. You could also install the Flashify app and install your recovery with that.
Click to expand...
Click to collapse
Thanks for your suggestions, I will try and let you know the outcome. Of course now, I have the problem with the wifi not turning on...which is only harder to fix without a recovery to boot into. Any thoughts on this new wrinkle?
spaldingsmails said:
I would try flashing TWRP with a different version of Odin. I recently needed to reflash recently. I had a similar problem. Tried Odion 10.7. Worked fine. You could also install the Flashify app and install your recovery with that.
Click to expand...
Click to collapse
Thanks for your suggestion! I tried flashing using odin 3.09 and the white samsung usb cable, and I finally have a recovery! Do you happen to know how to fix the wifi?
No idea on the wifi. That is way over my head.
angel4b said:
Hello everyone. One of the ladies I look up to as a mother gave me her broken s4 this morning. It was in a boot loop, and needed to have the full software flashed again. I downloaded OK3 from sammobile and successfully flashed it using Odin 3.11. I then rebooted and flashed CF Autoroot in Odin, rebooted and tried to enter recovery mode. I would get 3 lines of info that left the screen really fast, then the screen was blank for 10 seconds, then it vibrates and reboots into the normal rom. So I went back to Odin and flashed TWRP 3.0.2-0-jftespr.img.tar (unchecking the options for auto reboot, re-partition, f. reset time) and the log says suceed 1/failed 0, I get a green pass and when I try to reboot into recovery I get the seandroid message. So the phone knows I have a non-standard recovery...still after that message I get the same blank screen, 10 second delay, and then vibrate and reboot to the rom. I tried reflashing the stock OK3 and the seandroid message goes away, but recovery mode still does not work for me Other than this recovery issue, the phone appears to work fine and it even downloaded an OTA (which I have not installed.) Any suggestions?
Click to expand...
Click to collapse
I would suggest you flash TWRP in a different version.
Related
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.
It's impossibe to flash anything other than the leaked 4.4.2 stock because you flashed your bootloader to kitkat, no you MUST stay on sammy 4.4.2 till the devs found a solution for this. Thats why you have to read carefully be4 you flash.
silentvisitor said:
There is a script in official firmware that checks for official recovery and if it finds a custom one it tries to overwrite with official one. If i remember correct it's called install-recovery. sh
PhilZ recovery handles it automatically.
Click to expand...
Click to collapse
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?
sid8907 said:
No luck!
I tried PhilZ recovery from the below link.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/hltexx
What are my other options?
Click to expand...
Click to collapse
This one seems to be the only one working with 4.4.2 right now.
Possible solution
The way I can suggest is to create a little update.zip file with little updater-script to remove install-recovery.sh file from device (just one line needed).
Ok, I found a zip which I am attaching below. You(or anyone) may review the script before flashing.
Place this on your external (or internal) sdcard.
In ODIN don't check Auto reboot
Flash Recovery. Remove phone when it says PASS.
Remove battery. Start in Recovery mode by pressing buttons.
You should now be in new Recovery.
Flash that zip file.
Reboot.
You should be good.
The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.
I am out of ideas.
I would suggest you to wait for someone to come up with working solution. Being too adventurous with ODIN could brick your device.
sid8907 said:
The Auto Reboot for some reason is faded out. Tried different versions of Odin and also tried to open it with the phone connected/disconnected.
Click to expand...
Click to collapse
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again
Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?
radicalisto said:
Clear out all your ODIN caches etc, delete all files and keep 1.85.
Flash this (only working recovery on 4.4.2) via PDA in ODIN, If it doesn't reboot auto after saying PASS or RESET.. just turn phone off, reboot into recovery and it'll be fine.
EDIT: Just re-read, Re flash your Stock 4.4.2 (Use XEO not the leaked one!) and then start again
Click to expand...
Click to collapse
Thanks!!
sid8907 said:
Thanks!
Maybe a little off topic, but is there a way to install CM11 on Stock 4.4.2 on the Note 3?
I've been reading Samsung is out with a new bootloader so there is no way round this?
Click to expand...
Click to collapse
You may have to do a little reading but I believe CM11 is now working on the KK bootloader...
sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398
sid8907 said:
So I've been running a rooted Note 3 for a while. When the Note 3 Kitkat update came out, I updated it via Odin as OTA update was not available since I was rooted.
All the posts I read had mentioned that updating to 4.4.2 from 4.3 would erase all my data but after updating via odin all my data was in place. I had only lost root which I rooted again though CF Auto Root.
The problem now is that when I try to install CWM (via Odin) or TWRP (via Goo or Odin), it goes through the installation but then the phone goes into a boot loop of sorts..It's NOT the normal boot loop which gets stuck on the Samsung logo.
What happens is that the phone vibrates twice (with a 1 sec interval in between), then the Samsung Note 3 N-9005 screen appears with "Booting Recovery..." on the top left and within a sec it goes blank and then back to 2 vibrates and the screen come on to show Samsung Note 3 N-9005.
The only way I found to fix this was a battery pull and then turning on the device holding the power, home and down vol key to boot into recovery and then flashing CF Auto Root again.
I don't know why am I not able to install any of these recoveries. I've made sure I try to install the latest versions of them which are Kitkat compatible.
Anyone else with this problem or a solution?
Can a Cache and data wipe fix this? But the problem again being I won't be able to backup my ROM since i can't get these recoveries to install!
Click to expand...
Click to collapse
jp.26 said:
here's the link for twrp for ya'll http://forum.xda-developers.com/showpost.php?p=50333147&postcount=398
Click to expand...
Click to collapse
so.... yeah i just updated my bootloader to 4.4.2 and this drove me literally insane. ive been working on it for 4 hours now. i encountered so many problems with installing the bootloader. exact same problem as SID8907. i gotta tell you tho.... you worked some magic my friend. i tried almost everything. then i came across your link. i was like why not? so i flashed the img in odin..... anddddd :drumroll pleaseeeeee:: IT WORKED. ahhh....... so much frustration and the problem is solved!!! thank you so much JP.26 :good::laugh:
is there any word on how to fix this been looking for hours tmobile note beast dont want to put any roots down on my phone before i find a way to flash cm or a non bloated note rom would be nice.
I'll that I've managed is to root and flash twrp I found a way to turn cwm recovery into a tar file and flash through odin. But i just get into a boot loop with cwm due to the boot loader I presume but tarp works fine I just can't flash cm11. I get boot loop every time
Sent from my SM-N900T using XDA Premium 4 mobile app
im sorry but im confused here... does this all simply mean that there is not yet a working cwm for 4.4.2 yet? and that while we can root, there is no working recovery for this version?
I'm not sure myself tarp works but I can't flash cm11
Sent from my SM-N900T using Tapatalk
Phillz cwm Dev edition I think that's the name works its a themed touch cwm. This works great but still can't flash cm so gayyyy
Sent from my SM-N900T using Tapatalk
I was wondering what happened to the cmw too.
The modded cmw by Chenglu is the only one working that I know of.
Link to thread: http://forum.xda-developers.com/showthread.php?t=2454079
all.
I have an i9505 on 3 UK that has been rooted for over 6 months. I've been running the excellent TW based Echo Rom but wanted to try an ASOP rom but quickly wanted to revert.
I tried to restore my Nandroid but this failed and screwed up the phone (dont ask)so back to ODIN and i flashed back to stock 4.4.2 firmware for the UK via Sammobile (NG8)
Now back to square 1 so attempted to reroot with CF Autoroot again via ODIN. all show pass and i get the black screen on the phone with the red android logo and line stating stock recovery restored. I then used ODIN to flash Philz recovery again shown as Pass, however when i try to get into recovery i get some small white text on the bkack background that is there too briefly to read before the phone reboots as normal.
The Su superuser app is there but states the Su binary is outdated and the phone has no root access.
Ive read a few methods to get round this but they all seem to follow the same process ive tried a few times now.
The Rom for Echoe is auto root so id have thought if i could get to recovery somehow i could just flash this ?
Any one any views or have i screwed up for good ? .
You will be fine.
If you want to flash a custom rom anyway the shortest way would be to just flash the custom recovery. You don't need root for that.
Uncheck auto-reboot before you flash the recovery and it should work.
Lennyz1988 said:
You will be fine.
If you want to flash a custom rom anyway the shortest way would be to just flash the custom recovery. You don't need root for that.
Uncheck auto-reboot before you flash the recovery and it should work.
Click to expand...
Click to collapse
so i reflashed Philz recovery and unchecked auto reboot. This then gives me PASS in ODIN. I guess then i unplug and try and activate recovery - but still nothing...it just boots up normally ?
robinta said:
so i reflashed Philz recovery and unchecked auto reboot. This then gives me PASS in ODIN. I guess then i unplug and try and activate recovery - but still nothing...it just boots up normally ?
Click to expand...
Click to collapse
What is the model descriped when you are in download mode?
What is the exact version of Philz you are trying to flash?
Lennyz1988 said:
What is the model descriped when you are in download mode?
What is the exact version of Philz you are trying to flash?
Click to expand...
Click to collapse
GTI9505...(Bootloader i9505xxegng8)
Originally I tried philz_touch_5.15.8-i9505.tar.md5
and then updated to philz_touch_6.23.9-i9505.tar.md5 with no avail.
Try redownloading it. If you say that if passes, then it should just work.
If it still fails then try TWRP. Uncheck auto-reboot before flashing.
Could it be connected to me flashing a generic unlocked UK firmware on a 3 UK handset ?
That's sorted it ! Flashed CWM recovery and am now running Echoes v28.
Thanks for the help. I was really panicking for a while.
I wont be changing roms for a while but I guess if I did I won't lose root ?
New to the S4 - did a search and could not find a similar problem as mine...
My friend gave me his S4 and told me it is rooted - which it is. However, there seems to be no recovery on the phone. When I try power-vol up-home, I get the blue recovery note at the top, but then the phone just continues to boot into the system (MF9). I used Odin to go back to stock and then attempted to boot into recovery - no luck. I rooted the phone again via CF Auto Root and tried to install a custom recovery via Odin and TWRP Manager - still no luck. Anyone have any ideas/suggestions? I appreciate the help.
Bumping this up to the top for one more run through...thanks everyone.
Sixbowmans said:
Bumping this up to the top for one more run through...thanks everyone.
Click to expand...
Click to collapse
Maybe go in to Odin mode and flash latest stock making sure to unchecked the auto reboot option. When it finishes flashing unplug and pull the battery, let it boot it'll take a while (took mine about 10-15 minutes). You'll then be on latest stock with latest bootloader and recovery. From there you can go back to Odin mode and flash TWRP. Once again making sure to not auto reboot.
Just to be safe back up apps and msic and picture etc on samsung kies and then do a full recovery delete everything and install the latest firmware then try cf auto root again or if you have trouble with that rhen use kingoroot and then flash twrp or phils recovory and get a rom. If that doesnt work just get cyanogenmod installer which installs root and a stock rom.
Sent from my SM-N910V using XDA Free mobile app
mattzeller said:
Maybe go in to Odin mode and flash latest stock making sure to unchecked the auto reboot option. When it finishes flashing unplug and pull the battery, let it boot it'll take a while (took mine about 10-15 minutes). You'll then be on latest stock with latest bootloader and recovery. From there you can go back to Odin mode and flash TWRP. Once again making sure to not auto reboot.
Click to expand...
Click to collapse
Thanks mattzeller. Your suggestion took me back to my Evo days. I took out the sd card, flashed with Odin, pulled the battery, rebooted the system, and then was also able to boot into recovery.
Hi All,
I have read through quite a lot of your threads on how to root a Note 3 and am getting nowhere. I once had it rooted and had Phronesis V4.1 and was working fine till one day it wasn't recognizing my sim card, so i tried putting Phronesis V5 on and ever since have had trouble. First it didn't work so i went onto Sammobile and down loaded Baseband Version N9005XXUGBOJ1. And have got my note 3 working again but i cant root it for some reason, when i try to go into recovery it says not rooted. It puts me into some sort of recovery when i press volume up/power/and the bottom button but when i try to it comes up with an error message in Red : Failed to verify wholefile signature, signature verified failed. This of course happened when i did have root. Any help or pointing in the right direction would be appreciated .
Norman
Have you tried flashing the latest supersu through twrp?
audit13 said:
Have you tried flashing the latest supersu through twrp?
Click to expand...
Click to collapse
Hi Audit13, Thanks for your reply. I cant put TWRP or any other recovery`s on, i put TWRP onto Odin and flashed it but it keeps reverting to the stock android recovery i have got on my device. At this precise moment i cant even get into stock recovery, i press the volume up/ power and home button whilst the Note 3 is off. It shows recovering into boot in blue and then set warranty bit: Recovery, but it just resets to starting up my phone. Also if i flash supersu will it work if i dont have a rooted device? tia
Normski15 said:
Hi Audit13, Thanks for your reply. I cant put TWRP or any other recovery`s on, i put TWRP onto Odin and flashed it but it keeps reverting to the stock android recovery i have got on my device. At this precise moment i cant even get into stock recovery, i press the volume up/ power and home button whilst the Note 3 is off. It shows recovering into boot in blue and then set warranty bit: Recovery, but it just resets to starting up my phone. Also if i flash supersu will it work if i dont have a rooted device? tia
Click to expand...
Click to collapse
Wipe your phone and reflash your stock rom egain,then flash the recovery...
Let us know! !!
jemis1983 said:
Wipe your phone and reflash your stock rom egain,then flash the recovery...
Let us know! !!
Click to expand...
Click to collapse
Ok will try thanks.
maybe you flashed the wrong recovery file.
Normski15 said:
Ok will try thanks.
Click to expand...
Click to collapse
Hi tried that wiped phone and reinstalled original stock, rooted it then put TWRP on and now i`m on a contsant loop of Recovery booting: Recovery is not a seandroid Enforcing. Set warranty bit : recovery. any help please.
Try another recovery... That'll help you out
When flashing TWRP in Odin, do not check anything except f.reset time. Flash TWRP and, when you see the word "reset" in the status window, remove the USB cable, remove battery, wait 5 seconds, replace battery, use the button combination to boot into recovery.
Thanks to everyone involved got it sorted, i am assuming i was using the wrong/or corrupt TWRP. Did what you kind people said and am back on Pronesis V5.
hi
ive got a s8, which was rooted using magisk, but was having issue, so was advised to unroot, remote and try superSU instead.
in the process of flashing stock rom AND 8.0, the phone now boots up to black screen showing verification failed, only option to reset.
when i press reset, all it does is restarts, loads up TWRP which had been installed before,
TWRP runs some program and fails and then phone goes back to black screen showing verification failed.
ive booted it into download mode, in the hope that i can just start again by simply lashing fresh stock rom, but it connects to odin fine, but when i click start, it gives a red error every time.
so i cant access the standard recovery menu as ive got TWRP so that loads instead and it looks as that is corrupted and i cant flash new fresh rom from download as odin brings up issue
ive check another phone and there is no issue with odin or the usb-c cable,
there is an issue with the s8 and odin does not like something in the s8 so wont let me flash anything to it,
any advice would be greatly appreicated.
When you flashed the stock rom using odin did you flash a bootloader aswell as the rom or did you just flash the rom the problem might be that the bootloader was for pie and the rom is oreo or vice versa whenever I flash back to stock I fill all but one of the boxes in odin
i suspect it was all oreo, as i downloaded as a complete file but ill check and get back to you
thanks for advice.