During Custom ROM installation, my YU Yureka become dead and now its showing nothing rather than a Red light during charging and nothing else.
When I connect it to my PC then In the Devices and printer option its show RELINK HS-USB QDLoader 9008 (COM8) in the device manager. And also my PC behave awkwardly when Yureka connected to PC, sometimes it hanged.
Please Help me ! What to do?
http://forum.xda-developers.com/yureka/help/solution-how-to-make-hard-bricked-yu-t3384734
Related
Hi there,
Well, I am a samsung s4 i9506 owner. This weekend, I actually hard brick my phone and now it doesn't respond. It doesn't even start, No screen flash, No led flash. When I try to connect it to PC, it says Windows cannot recognize this device. However, I figured it out how to connect my phone to pc, its by holding the power button for one minute and then plug in the usb cable, which is connected to the pc on the other end. Now it shows, RELINK HS-USB QDLoader 9008 (Com 6). I tried everything whichever I could found after google search but nothing pls help
I think the people in the below thread have the same problem.
http://forum.xda-developers.com/galaxy-s4/help/samsung-s4-fullbrick-t3284237
My phone has become a little crazy when I connect it to the computer it detects me as Qualcomm HS-USB Diagnostics 900E (COM 10) I have installed it with Qfil I have loaded the twrp but nothing also with YGDP the rom but nothing and the only thing that it works is the little light blinking please help! :crying:
So my Nokia 6.1 (TA-1045) randomly bricked and now the phone does not boot up at all. No screen, no sounds, no charging noise.
When I plug it into my Windows PC, the PC does recognize that it is plugged in. However it shows up as "Qualcomm HS-USB QDLoader 9008".
The best resource I could find with a similar issue was this thread, but for the LG 70+ devices. Is there any way for me to fix my bricked phone? Or am i out of luck?
abc617 said:
So my Nokia 6.1 (TA-1045) randomly bricked and now the phone does not boot up at all. No screen, no sounds, no charging noise.
When I plug it into my Windows PC, the PC does recognize that it is plugged in. However it shows up as "Qualcomm HS-USB QDLoader 9008".
The best resource I could find with a similar issue was this thread, but for the LG 70+ devices. Is there any way for me to fix my bricked phone? Or am i out of luck?
Click to expand...
Click to collapse
So if it's showing as qc 9008 mode than it's a good sign.. it means it's going to edl mode.
What you need to do is find a qfil flashable firmware (just google) and flash it on your device through qfil flash software.
Hi, I own a BS2 Pro Global and it suddenly froze and shutdown, it happened several times and now it's completely dead. It won't charge and boot up. When I connect it to a PC my PC detects it but no signs of power from the device.
In my 'device manager' it says "Qualcomm HS-USB QDLoader 9008 (COM#)"
it's also detected by Mi Flash tool but I don't have anything to boot from.
*If you guys know where I can download a fastboot file or if you have can you please share it with me T_T
did
jlrivera1125 said:
Hi, I own a BS2 Pro Global and it suddenly froze and shutdown, it happened several times and now it's completely dead. It won't charge and boot up. When I connect it to a PC my PC detects it but no signs of power from the device.
In my 'device manager' it says "Qualcomm HS-USB QDLoader 9008 (COM#)"
it's also detected by Mi Flash tool but I don't have anything to boot from.
*If you guys know where I can download a fastboot file or if you have can you please share it with me T_T
Click to expand...
Click to collapse
did you solve your problem?
Firstly, my phone don't boot in any mode(hardbricked), no display, no vibration, no fastboot, no recovery (even tried shorting 2 - 6 pins), just showing red light when connecting to pc/charger. Earlier, it was showing as "Qualcomm HS-USB QDLoader 9008" in device manager, so after researching on it, I found that I can flash stock rom using qfil tool (used files provided here). Then I tried flashing it using qfil, the process stopped at dowloading firehorse file. "Qualcomm HS-USB QDLoader 9008" in device manager, automatically, disappeared and after then its showing "Unknown USB Device (Device Descriptor Request Failed)" in device manager.
Now, I tired connecting phone with all key combinations, shorting pins, reconnecting battery, updating drivers, changing ports, but nothing worked. I am not able to connect phone in "Qualcomm HS-USB QDLoader 9008" mode, instead it always shows as "Unknown USB Device (Device Descriptor Request Failed)".
Observations: After flashing, even if phone doesn't boot any mode, it heats up when connecting to usb. (earlier it was not same)
It all happened after interrupted flashing, is there any possible solutions to fix it, making phone detectable as qdloader and also unbrick it?
Your help will be highly appreciated.