AT&T Unlocked Blackberry Priv firmware update for Vodacom South Africa - BlackBerry Priv

I bought a AT&T unlocked Blackberry Priv on Ebay. It will not update to the latest Marshmallow version. I have been in contact with AT&T and they told me that I need a firmware update from my local provider. Has anyone have any experience of fixing this issue in South Africa?

Have you been in contact with Vodacom about this? I doubt they will help you or even give you a link to download a firmware that works in SA.
Doesn't the phone work in SA? Are you getting reception?

You could buy an AT&T Sim off ebay. I believe you can plug that in while on WIFI and you might get lucky
Sent from my STV100-1 using XDA-Developers mobile app

AT&T sucks
So AT&T have not officially released marshmallow for the PRIV yet. What is available is a the beta version only open to a few(pre-registered) users.

so basically when the update will be release we can install it via autoloader or, hopefully, ota on unlocked at&t priv.

you can install the update using the autoloader same as it is available for 5.1.1 as of now... for OTA you need the AT&T Sim card on the device

Related

At&t sim unlock software update issue

Hi
I have a at&t SIM unlocked Samsung s7 edge using in India .The unlock is from a third party and not the official at&t unlock . My phone is currently on marshmallow 6.0.1 version APD1 ,When I try for an update all I get is software upto date from the at&t servers. According to my knowledge I feel there were few security upgrades released by at&t and am not able to get the upgrades , is there any alternative for this ?? I believe no root available as of now for G935A .
Flash the latest U firmware instead. https://forum.xda-developers.com/att-s7-edge/how-to/samsung-sm-935u-firmware-install-guide-t3411451

Receiving OTA updates outside U.S.

Hello! Just received used verizon s7 edge g935v. I live in Ukraine and I use our local carrier. Phone runs APH1 firmware (september build). I tried to check for OTA updates, but the app returns error "Can not authenticate your device". How can I install OTA or even Nougat beta?
I believe you'll have to use Samfirm to get updates since you're not on Verizon as a customer. Should be fairly easy to do.
I live in Mexico, here we cant receive updates too, but you can use these firmwares
http://forum.xda-developers.com/verizon-s7-edge/how-to/firmware-verizon-s7-edge-t3344092
You only need to flash them via odin and you will be running the most current firmware!
I am using 935V with U firmware in india. I am receiving 935U OTA updates.
I am also Ukrainian, and using g935v with Kyivstar. The best way to have updates is not via OTA, but using VZW Software Upgrade Assistant for Samsung - http://support-us.samsung.com/VerizonSoftwareUpdateWin
Guys, if you are using 935V outside of US, please install unlocked firmware, its is bloatware free, fast,smooth and no verizon apps. You will also get Software updates.

Why didnt my phone get nougat?

I recently bought my s7 edge directly from the samsung website at&t version and got it unlocked to be used on the tmobile network. I tried updating the phone to nougat but at&t software update would say that I am on the latest software which was 6.0.1. I even used a working at&t sim card because I thought maybe you need to be on their network but still it gave me the same thing. Finally I just used odin to update to nougat but I wanted to know if anyone knows why I was not able to update ota?
navpal93 said:
I recently bought my s7 edge directly from the samsung website at&t version and got it unlocked to be used on the tmobile network. I tried updating the phone to nougat but at&t software update would say that I am on the latest software which was 6.0.1. I even used a working at&t sim card because I thought maybe you need to be on their network but still it gave me the same thing. Finally I just used odin to update to nougat but I wanted to know if anyone knows why I was not able to update ota?
Click to expand...
Click to collapse
You are on the international version if you bought it directly from Samsung. They haven't released the international N for the S7 Edge. I know this is frustrating but you aren't the only one. If you can put up with ATTs bloat then go flash the Odin files, they have been released for ATT.
Sent from my SAMSUNG-SM-G935A using Tapatalk

about LG V35 update in overseas

Hi everyone!
I'm from VietNam. I just buy a V35 AT&T and i want update android for it. Imei is clean and my phone is unlocked. But i cannot update it. Have anyway to update my phone in my country?
Many thanks!
Hi! There is no way to get official AT&T OTA out of USA and without AT&T sim card so the only way for you to go is to update your phone via LGUP and flashing US OPEN KDZ from here.
Does updating using this will not relock the phone to at&t network?
Sent from my iPhone using Tapatalk
No. Once unlocked from AT&T it will stay unlocked.
LG is the best phone manufacturer when it comes to poor software support.

AT&T model and lack of updates

Hello. I wanted to ask about a problem that I have experienced with the S10+, which I know others have experienced as well, and hope there is a solution out there for it. I purchased the S10+ directly from Samsung, as they were offering a much better trade-in deal. However, I did purchase the AT&T version.
That being said..aside from the 2 fingerprint reader updates Samsung has issued, I have never received an OTA update from AT&T. Not a single one. I've had to come here to XDA, hope that someone posts the latest update files, and update using Odin. It appears that those files are being posted less and less. I'm "stuck" on ASGB update, with the July 1 Security patch.
Does anybody have any advice, or suggestions on how I could go about getting regular OTA updates? Or is there other recommendations on what to do here? I know there are many others that have this same problem.
Thanks in advance
Lavman72 said:
Hello. I wanted to ask about a problem that I have experienced with the S10+, which I know others have experienced as well, and hope there is a solution out there for it. I purchased the S10+ directly from Samsung, as they were offering a much better trade-in deal. However, I did purchase the AT&T version.
That being said..aside from the 2 fingerprint reader updates Samsung has issued, I have never received an OTA update from AT&T. Not a single one. I've had to come here to XDA, hope that someone posts the latest update files, and update using Odin. It appears that those files are being posted less and less. I'm "stuck" on ASGB update, with the July 1 Security patch.
Does anybody have any advice, or suggestions on how I could go about getting regular OTA updates? Or is there other recommendations on what to do here? I know there are many others that have this same problem.
Thanks in advance
Click to expand...
Click to collapse
Are you using an AT&T SIM card? If you purchased an AT&T model AT&T sends OTA updates whether you got it from AT&T or Samsung. If you aren't using an AT&T SIM they won't send you any OTA updates and Samsung only sends OTA updates to the carrier free versions of the phones.
Yes, using an AT&T SIM card. In fact, I went to the local store and requested a brand new sim, just in case. That obviously didn't work either.
Lavman72 said:
Yes, using an AT&T SIM card. In fact, I went to the local store and requested a brand new sim, just in case. That obviously didn't work either.
Click to expand...
Click to collapse
All US S10+'s are the same. There is no such thing as a AT&T or Verizon phone on the S10+. That being said you can load any rom from any vendor on your phone. If you want to stick with AT&T and don't mind their bloat apps you can go to www.sammobile.com and download the latest AT&T rom and load it with Qdin. Make sure your sim card is installed when you reboot and you will have an AT&T phone when it is done.
HolyHog said:
All US S10+'s are the same. There is no such thing as a AT&T or Verizon phone on the S10+. That being said you can load any rom from any vendor on your phone. If you want to stick with AT&T and don't mind their bloat apps you can go to www.sammobile.com and download the latest AT&T rom and load it with Qdin. Make sure your sim card is installed when you reboot and you will have an AT&T phone when it is done.
Click to expand...
Click to collapse
Prior to August or September firmware on the S10+ was not all-inclusive. If you used an unlocked AT&T S10+ with a different carrier's SIM the AT&T firmware stayed rather than updating to accommodate the inserted SIM card. AT&T doesn't send OTA updates to phones running AT&T firmware if a non-AT&T SIM is inserted and as long as the AT&T firmware is installed AT&T is the only place you can get an OTA update from. You can't even update with SmartSwitch because it will show that you have the latest firmware regardless of how old it is.
I purchased an unlocked AT&T S10+ in early July that was on the February security patch and have a T-mobile SIM. The only way I could get software updates was to manually flash the U1 carrier free firmware with Odin. Immediately after flashing that firmware multiple OTA updates showed up for my phone.
---------- Post added at 01:18 AM ---------- Previous post was at 01:10 AM ----------
AT&T offers a modded version of SmartSwitch that you can download from their website. You might be able to update to the most current AT&T firmware using their software which is called AT&T SmartSwitch. The standard Samsung SmartSwitch program doesn't access AT&T servers and won't update phones with AT&T firmware.
HolyHog said:
All US S10+'s are the same. There is no such thing as a AT&T or Verizon phone on the S10+. That being said you can load any rom from any vendor on your phone. If you want to stick with AT&T and don't mind their bloat apps you can go to www.sammobile.com and download the latest AT&T rom and load it with Qdin. Make sure your sim card is installed when you reboot and you will have an AT&T phone when it is done.
Click to expand...
Click to collapse
Why did I have to pick the carrier when purchasing the phone via Samsung? I could have selected the unlocked version, or any of the american carriers. I have the AT&T model. I see the logo when I boot up, and have all their bloatware apps. So that's not the issue. The issue is why haven't I received an OTA update, ever?
I use this threadhttps://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697 to manually update. The OP hasn't posted any new versions in a while.
jhs39 said:
Prior to August or September firmware on the S10+ was not all-inclusive. If you used an unlocked AT&T S10+ with a different carrier's SIM the AT&T firmware stayed rather than updating to accommodate the inserted SIM card. AT&T doesn't send OTA updates to phones running AT&T firmware if a non-AT&T SIM is inserted and as long as the AT&T firmware is installed AT&T is the only place you can get an OTA update from. You can't even update with SmartSwitch because it will show that you have the latest firmware regardless of how old it is.
I purchased an unlocked AT&T S10+ in early July that was on the February security patch and have a T-mobile SIM. The only way I could get software updates was to manually flash the U1 carrier free firmware with Odin. Immediately after flashing that firmware multiple OTA updates showed up for my phone.
---------- Post added at 01:18 AM ---------- Previous post was at 01:10 AM ----------
AT&T offers a modded version of SmartSwitch that you can download from their website. You might be able to update to the most current AT&T firmware using their software which is called AT&T SmartSwitch. The standard Samsung SmartSwitch program doesn't access AT&T servers and won't update phones with AT&T firmware.
Click to expand...
Click to collapse
happen to have remember the thread which had the carrier free firmware?
Lavman72 said:
Why did I have to pick the carrier when purchasing the phone via Samsung? I could have selected the unlocked version, or any of the american carriers. I have the AT&T model. I see the logo when I boot up, and have all their bloatware apps. So that's not the issue. The issue is why haven't I received an OTA update, ever?
I use this threadhttps://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697 to manually update. The OP hasn't posted any new versions in a while.
Click to expand...
Click to collapse
Your OTA updates come from AT&T since you are their customer and purchased the AT&T model instead of the carrier free one. You should really be asking AT&T why you aren't receiving OTA updates.
You might be able to update using AT&T SmartSwitch which you can download from AT&T's website.
jhs39 said:
Your OTA updates come from AT&T since you are their customer and purchased the AT&T model instead of the carrier free one. You should really be asking AT&T why you aren't receiving OTA updates.
You might be able to update using AT&T SmartSwitch which you can download from AT&T's website.
Click to expand...
Click to collapse
I've tried contacting AT&T numerous times. They have no idea what the issue is. A quick google search shows the Smart switch tool in AT&T, but when you try and click on the link, it just takes you to a blank page.
Newer firmware is all-inclusive so you could download firmware with Frija and flash it with modified Odin even if it isn't AT&T firmware. The problem is that if you flash a build number AT&T didn't actually use on their devices you still won't get OTA updates from AT&T because their servers won't recognize the software version you are running.
---------- Post added at 02:03 AM ---------- Previous post was at 01:58 AM ----------
Lavman72 said:
I've tried contacting AT&T numerous times. They have no idea what the issue is. A quick google search shows the Smart switch tool in AT&T, but when you try and click on the link, it just takes you to a blank page.
Click to expand...
Click to collapse
Have you tried the standard Samsung SmartSwitch program? Maybe it can update AT&T firmware now but it didn't in the past.
---------- Post added at 02:13 AM ---------- Previous post was at 02:03 AM ----------
If your phone is not carrier locked you could flash the U1 firmware and then you would get OTA updates from Samsung instead of AT&T. But you might not have access to some AT&T services like visual voicemail without AT&T firmware. AT&T also hates unlocked phones so it's possible Volte and Wi-Fi Calling will stop working. Some AT&T customers with unlocked phones were able to get the services activated by calling AT&T but success with AT&T Customer Service is hit or miss at best as you already discovered.
I have the same problem I have been able to update my S10 + AT&T through ODIN, because I cannot update using FOTA, I have the September security patch specifically "G975USQS2ASI6", I want to update to the October patch, but I do not receive the update via FOTA, because I do not use AT&T SIM but I am abroad using with another SIM.
I can Flashear with ODIN to the U1 version that is unlocked, I will not have any problem, I am not interested in losing any AT&T service because I do not use any, I just want to have my S10 + free of Bloatware and always receive updates via FOTA.
I found this Firmware is Sammobile "https://www.sammobile.com/samsung/galaxy-s10-plus/firmware/SM-G975U1/ATT/download/G975U1UEU2BSIP/298471/"
It is the most recent update of AT&T that they have on the official website, but it is G975U1 unlocked and not the G975U. If Flash this version will I have any problem freezing or ruining my phone?
rodix_t said:
I have the same problem I have been able to update my S10 + AT&T through ODIN, because I cannot update using FOTA, I have the September security patch specifically "G975USQS2ASI6", I want to update to the October patch, but I do not receive the update via FOTA, because I do not use AT&T SIM but I am abroad using with another SIM.
I can Flashear with ODIN to the U1 version that is unlocked, I will not have any problem, I am not interested in losing any AT&T service because I do not use any, I just want to have my S10 + free of Bloatware and always receive updates via FOTA.
I found this Firmware is Sammobile "https://www.sammobile.com/samsung/g...M-G975U1/ATT/download/G975U1UEU2BSIP/298471/"
It is the most recent update of AT&T that they have on the official website, but it is G975U1 unlocked and not the G975U. If Flash this version will I have any problem freezing or ruining my phone?
Click to expand...
Click to collapse
No G975U1 and G975U firmware are interchangeable. If your phone was still carrier locked you might get a message asking for the unlock code but you aren't using an AT&T SIM so your phone obviously isn't network locked. I went from AT&T G975U firmware to U1 firmware with no problems.
Im glad I'm not the only one experiencing this. My wife and I did a bogo deal for the Galaxy s10+ back in March. My phone has recieved updates regularly, while my wife's phone is still on the March patch and security. She hasn't even recieved the fingerprint update fix. Tried calling AT&T about it and they were totally unhelpful. Told me I had to contact Samsung about that and that they couldn't help with the issue. Im debating on calling them back and trying to speak with someone more knowledgeable, but it might just be easier for me to update her phone manually. I haven't had to do something like that in ages, so I wanted to ask for some guidance on here.
Would i need to do each consecutive update she's missed manually? Or would just updating to the newest firmware outright do the trick?
rodix_t said:
I have the same problem I have been able to update my S10 + AT&T through ODIN, because I cannot update using FOTA, I have the September security patch specifically "G975USQS2ASI6", I want to update to the October patch, but I do not receive the update via FOTA, because I do not use AT&T SIM but I am abroad using with another SIM.
I can Flashear with ODIN to the U1 version that is unlocked, I will not have any problem, I am not interested in losing any AT&T service because I do not use any, I just want to have my S10 + free of Bloatware and always receive updates via FOTA.
I found this Firmware is Sammobile "https://www.sammobile.com/samsung/galaxy-s10-plus/firmware/SM-G975U1/ATT/download/G975U1UEU2BSIP/298471/"
It is the most recent update of AT&T that they have on the official website, but it is G975U1 unlocked and not the G975U. If Flash this version will I have any problem freezing or ruining my phone?
Click to expand...
Click to collapse
Hey do you have the G975USQS2ASI6 ODIN files? I have been looking all over for it to flash it to my phone.
I just want to note, I am also in the same boat and it's INCREDIBLY frustrating. Both phones purchased in March with the BOGO deal, both phones stuck on the July 1st security patch. Supposedly what I've found after reading quite a bit is you can bring the phone to a local samsung repair center and they can flash the newest firmware, once you're up to date SUPPOSEDLY that resolves the OTA stuff. I don't believe it though.

Categories

Resources