Database Users

How to flash Huawei Y300 with official rom

Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards

Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex

If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.

what is the latest firmware update for Huawei y300
what is the latest firmware update for Huawei y300? i have the software versio V100R001C151B165 is this the latest update?
please update

i backed up my imei but deleted the folder i try to backup again and it says its already backed up ??

How to restore Imei
I didn't understood woht ot restore my imei. Could you explain it completely?

HUAWEII Y300-0000 question
Hi,
I have HUAWEII Y300-0000 phone I've bought in china.
Managed to unlock it thanks to your manual.
It comes with ROM: Y300-0000V100R00C17B180 (Android 4.1.1).
The only problem I have is that sometimes when I try to dial I do not manage to establish call (the call is tried to be established and then disconnects). When this happens there is also problem in incoming calls. I manage to receive the incoming call but when answered the connection drops after several seconds.
My question is whether this is an issue you are familiar with.
If so, do you have any suggestions?
Are there any new ROMs for this version that maybe handle these kind of issues.
How can I install new ROM on already rooted phone?
Thanks in advance

tamirgz said:
Hi,
I have HUAWEII Y300-0000 phone I've bought in china....
Click to expand...
Click to collapse
Have the same problem - could I instal there soft for Y300-0100 after unlock bootloader?

Can you tell me how do I "zero" the Y300 IMEI? I have one that was left without system and now I can't flash the
HUAWEI_Y300_firmware(Y300-0100,Android 4.1,Emotion_UI,V100R001C00B175,Normal,05011FKA)
Now I can't revive my Huawei?
Thanks
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse

I tried the official one but the performance is very low:crying::crying::crying::crying:

Ram Expander on Huawei Asend Y300
I rooted my phone it works properly. Everything working fine. I just have have one problem that how to expand its ram. Plz tell me.
I tried with 2gb class 6 card with swalpt expander but it show nothing in it.

Huawei Y300 Ram Expander
Plz tell me how to expand ram of Huawei Ascend Y300.

babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
hi there, i believe you can only flash the official firmware upgrades from a official ROM because when you check for upgrades to the firmware it gives you a option to install from local storage which i have yet to see in a custom ROM. in future i would always recommend a backup before installing any other ROM

hey someone flashed the official rom successfully?

zeroing imei
can you write how to zero imei code

flashing huawei y300. if you can upload any ctock or custom ro who i can install in
mobilexpert said:
Hi,
same method as old models :
Check phone version / exact sub-model, here are three hardware versions of Y300:
1.Huawei Y300 (T8833) - TD-SCDMA / China Mobile
2.Huawei Y300-0000 (U8833) - WCDMA China Unicom
3.Huawei Y300-0100 (U8833) - WCDMA International
check version (product ID) with this code : *#*#1357946#*#* , dial button (green)
there is international version ROM - Y300-0100 at Huawei site, you probably downloaded it ...
- put "dload" folder from archive on formatted micro-sd card's ROOT
- put micro-sd card into phone
- start phone in download mode = Press the VOLUME UP and VOLUME DOWN key, and then press the
POWER key to power on the phone and enter the Software Upgrade Mode
(taken from upgrade manual - which is found in archive, pdf ... )
- wait for finish ...
p.s. if not accepting firmware - means it's not international version ....
b.r.
Alex
Click to expand...
Click to collapse
if you can upload any custom or stock rom who i can install in stock recowery for huawei y300(recowery name is .android system recowery<3e>

huawei y300 flashing
OmenHTX said:
If you have "faild" at step 2/2 , you must "zero" your imei > flash rom > restore imei.
Click to expand...
Click to collapse
how to get or hack bootloader code if my phone is bricked.
or
if you can upload any custom or stock rom to install in stock recowery(i can go to recowery and i can force upgrade but fails at step 2/2).
recowery name is ''android system recowery <3e>''.
or if i can instal any custom recowery now i install rom trought this custom recowery.
WRITE ANY OPTION TO WAKE UP MY PHONE.

falshing huawei y 300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
i install chainfire 3d and when i instaling driver my phone is shut down and i can wake up him from that it only show huawei ascend logo i can go to stock recowery and i can force upgrade but fail at ste 2 can you fix it

Unlockin Huawei Y300
babaphone said:
Hi
Downloaded HUAWEI Y300 firmware (Y300-0100, Android 4.1, Emotion UI, V100R001C00B175, General Version)
from Huaweidevice.com
But dont know how to flash it.
Kindly help
regards
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=BBliIomdLOI
You can unllock bootloader like this see on video
Sigma-key app

Ateeq Rana said:
Plz tell me how to expand ram of Huawei Ascend Y300.
Click to expand...
Click to collapse
Search playstore I forget the excat name of the app. I used swapit(the name has changed now I forget the name) this uses your sd card as ram but do take note that the more u use your sd card the quicker it can go bad.

Official 5.1 update for Honor 6+ PE-TL-10

http://www.hihonor.com/en/pages/support#?view=downloads
Download from Honor and apply manually by unpacking update.app file to sdcard.
Sent from my PE-TL10 using Tapatalk

RedMist said:
http://www.hihonor.com/en/pages/support#?view=downloads
Download from Honor and apply manually by unpacking update.app file to sdcard.
Click to expand...
Click to collapse
Anyone please explain, is there any difference between that forementioned version (B521) and the one issued on 25th ot Sept from Honor India (B507/B510).
I did updated with Indian version and all seems just fine, no bugs for now. Is there any need to re-apply this version now.
Thanks

RedMist said:
Download from Honor and apply manually by unpacking update.app file to sdcard.
Sent from my PE-TL10 using Tapatalk
Click to expand...
Click to collapse
I cant see the download link for 6+ :/
I can only see the download link for 6 Android 5.1 :/
can u give me a direct download link please ..
Regards

http://7961b64fc16ad15a92ef-9f98f1e...cf3.rackcdn.com/downloads/PE-TL10C900B324.zip

Would it be ok to apply this to my honor 6 plus here in the UK?
Also,after the lolipop update is double tap to wake still available?,thanks in advance for any help.

wildcat777 said:
Also,after the lolipop update is double tap to wake still available?
Click to expand...
Click to collapse
Nope, with beta B305 not aviable... I will try this one now.. let u know

in official also doesn't work 2tw.

B324 official everything is working. Dt2w also. Faster then in kitkat
Gesendet von meinem PE-TL10 mit Tapatalk

Guys i upgraded from B135 (KitKat) to the official Lollipop (B324) .. now i can't choose which Sim Card uses 3G/4G and also Motion Control is empty . Do you have same issues ?

Does it fits on the H6 L12 version?

I found some differences from the international one to the Chinese one like the notification management on the lockscreen, I had whatsapp notification in lollipop style but now, with the official international, I have the normal notification from the status bar
Edit: my bad, found it

everything in this official firmware works fine, better than kitkat. just light painting mode in camera options is missing (in beta version was present). in case of troubles i suggest a factory reset

double tap to wake up screen is not working on this update, anyone know how to solve this?

wildcat777 said:
Would it be ok to apply this to my honor 6 plus here in the UK?
Also,after the lolipop update is double tap to wake still available?,thanks in advance for any help.
Click to expand...
Click to collapse
Yes. I'm on Three, and this works fine.
No. It's broken

mikey160984 said:
B324 official everything is working. Dt2w also. Faster then in kitkat
Gesendet von meinem PE-TL10 mit Tapatalk
Click to expand...
Click to collapse
Hi,
DT2W is working after you reset? Because some of them do not have it. How its for you? What other features are missing than in kitkat? What about battery?
And what about adding button to hide navbar?

Hello everyone , I'm new and I wonder if I can update my h6 + p - TL10 Chinese with the latest firmware lollipop . I have just upgraded OTA and I version PE - TL10V100R001CHNC00B260
KIT KAT 4.4.2

any one
i need rollback file from 3.1 to 3.0

You can install ver 5.10.1 at Chinese EMUI website.

I took the plunge and upgraded and can confirm that double touch to wake does
not work and the slide to unlock screen is in Chinese text.

Where do you guys look for updates?
I look on this site: http://www.hihonor.com/en/pages/support#?view=downloads
As well as the official site (in Chinese): http://www.emui.com/cn/plugin.php?id=hwdownload&mod=detail&mid=125
Seems like they have updated on 30th september, newest (beta?) version = 5.10.1
Who did it already and can share experience?
currently on B324 emui 3.1 so far so good

Lock symbol top left keyboard plk-al10 b352

Last week I have updated my plk-al10 to b352 firmware (Chinese phone). Since then I have a small lock whenever I am on a password field in a form. How and where can I activate it or use it's purpose?

lassie20 said:
Last week I have updated my plk-al10 to b352 firmware (Chinese phone). Since then I have a small lock whenever I am on a password field in a form. How and where can I activate it or use it's purpose?
Click to expand...
Click to collapse
This is secure keyboard. You can disable it in input menu. I have this from DEV 6.3.1 on my PLK-L01 debranded in TL01H
Sent from my HONOR 7 via TapaTalk

Hello Lassie20,
where did you find the B352 update for the PLK-AL10?
I´m searching in intrenet and Chinese Emui pages but I can´t find it!
Thanks!

Thanks insideout!

@pademat
I used a Chinese proxy adres. That way I was able to download the update from hisuite.
I did this from the Netherlands.

@lassie20
Thanks for your hint!

Need help to install HUAWEI_Mate8_Firmware_NXT-L29B_Andriod 6.0_EMUI 4.0_C185B190_050

I am using NXT-AL10C00B386. I want to replace this ROM with C185B190. Who can guide me in easy words so that I can replace AL10 with C185. I have Unlocked bootloader. TWRP installed. Waiting for response please

james_jack said:
I am using NXT-AL10C00B386. I want to replace this ROM with C185B190. Who can guide me in easy words so that I can replace AL10 with C185. I have Unlocked bootloader. TWRP installed. Waiting for response please
Click to expand...
Click to collapse
http://forum.xda-developers.com/mate-8/general/guide-how-to-install-nougat-al10c00b523-t3500327

kdkinc said:
http://forum.xda-developers.com/mate-8/general/guide-how-to-install-nougat-al10c00b523-t3500327
Click to expand...
Click to collapse
I want to change to install C185 on AL10. I tried to install it but it failed. because my mobile phone is AL10, it can't install C185 ROM. I don't want Nougat yet. Just want to change my mobile phone to C185 instead of AL10. AL10 is chinese. I am using AL10 64 GB ROM+ 4 GB RAM

james_jack said:
I want to change to install C185 on AL10. I tried to install it but it failed. because my mobile phone is AL10, it can't install C185 ROM. I don't want Nougat yet. Just want to change my mobile phone to C185 instead of AL10. AL10 is chinese. I am using AL10 64 GB ROM+ 4 GB RAM
Click to expand...
Click to collapse
Download SRKToolHuawei-Lod-Chong-V2.0-20161002.zip
https://www.androidfilehost.com/?fid=529152257862664925

Is there a c900 nougat version

I want to switch AL 10 to C900 (global) noughat. Does anyone hhave a c900 stock rom ? Also is there a noughat available for C900 global?

c|nder said:
I want to switch AL 10 to C900 (global) noughat. Does anyone hhave a c900 stock rom ? Also is there a noughat available for C900 global?
Click to expand...
Click to collapse
Yes, c900 is global version. But you need a stock firmware on top of that. This is the suggestion from Huawei. I am not sure if there is nougat version available for c900.
If you change to c432 you will get plenty of options to choose the firmware especially European firmware. They are very stable, great battery life and you have all the features working properly. Once you change it to c432 you can update to b192 and then you will get system update to b560 and then you can jump to kangvip 577
So I would highly recommend you changing to c432. , all you need is srk tools, Huawei update extractor
This is the video tutorial by somboons or the guy who made srk tools. Just follow this tutorial
It is very easy and clear.
Use c432b192 or b180
Good luck
Don't forget to click on :good:::good::good::good::good: